The evolution of international output differences (1960-2000): From factors to productivity

This article presents a group of exercises of level and growth decomposition of output per worker using cross-country data from 1960 to 2000. It is shown that at least until 1975 factors of production (capital and education) were the main source of output dispersion across economies and that productivity variance was considerably smaller than in late years. Only after this date the prominence of productivity started to show up in the data, as the majority of the literature has found. The growth decomposition exercises showed that the reversal of relative importance of productivity vis-a-vis factors is explained by the very good (bad) performance of productivity of fast (slow) growing economies. Although growth in the period, on average, is mostly due to factors accumulation, its variance is explained by productivity.

The evolution of international output differences (1960-2000) : from factor to productivity

This article presents a group of exercises of leveI and growth decomposition of output per worker using cross-collntry data from 1960 to :2000. It is shown that at least llntil 197.5 factors of production (capital anel education) ",ere the main source of output dispersion across ecoIlomies and that productivity variance was considerably srnaller than in late years. Qnly after this date the prominence of productivity started to sho\\' up in the data. as the majority of the litcrature has found. The gro\\'th decomposition exercises showecl that t he reversal of relative irnportance of proeluctivity vis-a-\'is factors is explainecl by the very good (bad) performance of procluctivity of fast (slow) growing cconomies. Although growth in the pcriod, on avcragc. is mostly clue to factors accumulation. its variance is explained by productivity.

Improvement on the sales forecast accuracy for a fast growing company by the best combination of historical data usage and clients segmentation

Industrial companies in developing countries are facing rapid growths, and this requires having in place the best organizational processes to cope with the market demand. Sales forecasting, as a tool aligned with the general strategy of the company, needs to be as much accurate as possible, in order to achieve the sales targets by making available the right information for purchasing, planning and control of production areas, and finally attending in time and form the demand generated. The present dissertation uses a single case study from the subsidiary of an international explosives company based in Brazil, Maxam, experiencing high growth in sales, and therefore facing the challenge to adequate its structure and processes properly for the rapid growth expected. Diverse sales forecast techniques have been analyzed to compare the actual monthly sales forecast, based on the sales force representatives’ market knowledge, with forecasts based on the analysis of historical sales data. The dissertation findings show how the combination of both qualitative and quantitative forecasts, by the creation of a combined forecast that considers both client´s demand knowledge from the sales workforce with time series analysis, leads to the improvement on the accuracy of the company´s sales forecast.

The manufacturing industry in Brazil in the era of global value chains

This article presents a comprehensive and detailed overview of the international trade performance of the manufacturing industry in Brazil over the last decades, emphasizing its participation in Global Value Chains. It uses information from recent available global inputoutput tables such as WIOD (World Input-output database) and TIVA (Trade in Value Added, OECD) as well as complementary information from the GTAP 8 (Global Trade Analysis Project) database. The calculation of a broad set of value added type indicators allows a precise contextualization of the ongoing structural changes in the Brazilian industry, highlighting the relative isolation of its manufacturing sector from the most relevant international supply chains. This article also proposes a public policy discussion, presenting two case studies: the first one related to trade facilitation and the second one to preferential trade agreements. The main conclusions are twofold: first, the reduction of time delays at customs in Brazil may significantly improve the trade performance of its manufacturing industry, specially for the more capital intensive sectors which are generally the ones with greater potential to connection to global value chains; second, the extension of the concept of a “preferential trade partner” to the context of the global unbundling of production may pave the way to future trade policy in Brazil, particularly in the mapping of those partners whose bilateral trade relations with Brazil should receive greater priority by policy makers.

Citizens and the future of multilateralism in a polycentric world at 2030: the perspectives of emerging countries for the trading system: the impasse of WTO, the trends of mega agreements, the logic of value chains and the advent of consumers concerns on international trade

A new paradigm is modeling the World: evolutionary innovations in all fronts, new information technologies, huge mobility of capital, use of risky financial tools, globalization of production, new emerging powers and the impact of consumer concerns on governmental policies. These phenomena are shaping the World and forcing the advent of a new World Order in the Multilateral Monetary, Financial, and Trading System. The effects of this new paradigm are also transforming global governance. The political and economic orders established after the World War and centered on the multilateral model of UN, IMF, World Bank, and the GATT, leaded by the developed countries, are facing significant challenges. The rise of China and emerging countries shifted the old model to a polycentric World, where the governance of these organizations are threatened by emerging countries demanding a bigger participation in the role and decision boards of these international bodies. As a consequence, multilateralism is being confronted by polycentrism. Negotiations for a more representative voting process and the pressure for new rules to cope with the new demands are paralyzing important decisions. This scenario is affecting seriously not only the Monetary and Financial Systems but also the Multilateral Trading System. International trade is facing some significant challenges: a serious deadlock to conclude the last round of the multilateral negotiation at the WTO, the fragmentation of trade rules by the multiplication of preferential and mega agreements, the arrival of a new model of global production and trade leaded by global value chains that is threatening the old trade order, and the imposition of new sets of regulations by private bodies commanded by transnationals to support global value chains and non-governmental organizations to reflect the concerns of consumers in the North based on their precautionary attitude about sustainability of products made in the World. The lack of any multilateral order in this new regulation is creating a big cacophony of rules and developing a new regulatory war of the Global North against the Global South. The objective of this paper is to explore how these challenges are affecting the Tradinge System and how it can evolve to manage these new trends.

The manufacturing industry in Brazil in the era of global value chains

This article presents a comprehensive and detailed overview of the international trade performance of the manufacturing industry in Brazil over the last decades, emphasizing its participation in Global Value Chains. It uses information from recent available global inputoutput tables such as WIOD (World Input-output database) and TIVA (Trade in Value Added, OECD) as well as complementary information from the GTAP 8 (Global Trade Analysis Project) database. The calculation of a broad set of value added type indicators allows a precise contextualization of the ongoing structural changes in the Brazilian industry, highlighting the relative isolation of its manufacturing sector from the most relevant international supply chains. This article also proposes a public policy discussion, presenting two case studies: the first one related to trade facilitation and the second one to preferential trade agreements. The main conclusions are twofold: first, the reduction of time delays at customs in Brazil may significantly improve the trade performance of its manufacturing industry, specially for the more capital intensive sectors which are generally the ones with greater potential to connection to global value chains; second, the extension of the concept of a “preferential trade partner” to the context of the global unbundling of production may pave the way to future trade policy in Brazil, particularly in the mapping of those partners whose bilateral trade relations with Brazil should receive greater priority by policy makers

Evaluation of the genotoxicity of cellulose nanofibers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate

Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

Ticks' response to feeding on host immunized with glandular extracts of Rhipicephalus sanguineus females fed for 2, 4, and 6 days. I. Inactivity or early degeneration of salivary glands?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Agronomic characteristics, isoflavone content and Kunitz trypsin inhibitor of vegetable soybean genotypes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genetic parameters of total milk yield and factors describing the shape of lactation curve in dairy buffaloes

The objective of this study was to apply factor analysis to describe lactation curves in dairy buffaloes in order to estimate the phenotypic and genetic association between common latent factors and cumulative milk yield. A total of 31 257 monthly test-day milk yield records from buffaloes belonging to herds located in the state of São Paulo were used to estimate two common latent factors, which were then analysed in a multi-trait animal model for estimating genetic parameters. Estimates of (co)variance components for the two common latent factors and cumulated 270-d milk yield were obtained by Bayesian inference using a multiple trait animal model. Contemporary group, number of milkings per day (two levels) and age of buffalo cow at calving (linear and quadratic) as covariate were included in the model as fixed effects. The additive genetic, permanent environmental and residual effects were included as random effects. The first common latent factor (F1) was associated with persistency of lactation and the second common latent factor (F2) with the level of production in early lactation. Heritability estimates for Fl and F2 were 0.12 and 0.07, respectively. Genetic correlation estimates between El and F2 with cumulative milk yield were positive and moderate (0.63 and 0.52). Multivariate statistics employing factor analysis allowed the extraction of two variables (latent factors) that described the shape of the lactation curve. It is expected that the response to selection to increase lactation persistency is higher than the response obtained from selecting animals to increase lactation peak. Selection for higher total milk yield would result in a favourable correlated response to increase the level of production in early lactation and the lactation persistency.

Efeitos do glyphosate e sulfometuron-methyl no crescimento e na qualidade tecnológica da cana-de-açúcar

Os herbicidas, mesmo quando usados em doses reduzidas ou utilizados como maturadores, podem alterar a morfofisiologia da planta, o que pode levar a modificações qualitativas e quantitativas na produção. O presente estudo objetivou avaliar a eficiência agronômica e os efeitos, durante o crescimento da cana-soca, da aplicação de glyphosate e sulfometuron-methyl em baixas doses. O delineamento experimental utilizado foi o de blocos casualizados, com quatro repetições. Os tratamentos foram constituídos pelos herbicidas sulfometuron-methyl e glyphosate em diferentes doses e misturas e por uma testemunha (sem aplicação dos produtos). Uma linha de plantas de cana-de-açúcar foi destinada à aferição da qualidade tecnológica, sendo estabelecido 1 m aleatório a cada época de amostragem. Os colmos coletados foram submetidos ao desponte na altura da gema apical e à desfolha; em seguida, foram encaminhados para processamento segundo a metodologia do Sistema de Pagamento de Cana pelo Teor de Sacarose (SPCTS), sendo considerados os parâmetros tecnológicos: pol cana (PCC), pureza do caldo (PUI), açúcar total recuperável (ATR) e Brix. Nas soqueiras de cana-de-açúcar, realizaram-se análises de crescimento (altura e perfilhos). As avaliações foram realizadas na pré-colheita (30 dias após aplicação dos maturadores) e 30, 60, 90, 120, 150 e 180 dias após a colheita. Os herbicidas glyphosate e sulfometuron-methyl propiciaram melhoria da qualidade tecnológica da matéria-prima,com incrementos significativos na pureza do caldo e no Brix. A aplicação dos produtos não interferiu na produtividade e no teor de açúcar. Houve efeito estimulante no perfilhamento quando se usou glyphosate na dose de 400 mL ha-1 e redução em crescimento (altura) no início do desenvolvimento da cana, porém, com o tempo, o efeito não se manteve.

Produção de enzimas extracelulares por Fusarium solani de maracujazeiro amarelo

Uma das principais doenças do maracujazeiro, na maioria dos estados produtores do Brasil, é a podridão do colo, causada por Fusarium solani. Pouco se sabe a respeito da fisiologia deste patógeno do maracujazeiro amarelo, principalmente quanto à produção de enzimas extracelulares. O objetivo do presente trabalho foi verificar, em meios de cultura individuais e apropriados, a produção das enzimas extracelulares amilase, lipase, celulase, proteases (caseinase e gelatinase), lacase (oxidase) e catalase por isolados de F. solani, provenientes de maracujazeiro amarelo. O delineamento experimental adotado foi o inteiramente casualizado, em esquema de dois fatores (nove isolados versus sete enzimas), com três repetições. Todos os isolados de F. solani produziram, de maneira semiquantitativa, as enzimas extracelulares amilase, lipase, celulase, caseinase (protease) e lacase (oxidase). No entanto, a quantidade produzida de cada enzima foi significativamente diferente entre os isolados. As enzimas extracelulares gelatinase (protease) e catalase foram produzidas em pouca quantidade e de maneira igual por todos os isolados do fungo.

PET containers in Brazil: Opportunities and challenges of a logistics model for post-consumer waste recycling

The use of post-consumer materials is directly related to reducing the cost of production and extraction of natural resources. Non-recyclable materials are randomly disposed in the environment. Brazil is one of the largest consumers of PET (polyethylene terephthalate) bottles. The purpose of this paper is to describe the opportunities and challenges of the logistics model for post-consumer PET bottle recycling in Brazil, while providing knowledge of its practices along the recycling chain. The results describe the need to educate those directly and indirectly involved in the process: to reduce consumption in order to reduce the amount of waste generated: to structure the post-consumer reverse chain and engage industrial sectors and government, through public policies, to support cleaner technologies along the PET bottle production chain. (C) 2010 Elsevier B.V. All rights reserved.

Comportamento alimentar do camarão marinho farfantenaeus subtilis em condições laboratoriais

Shrimp culture represents an important activity to brazilian economy. The northeastern region has presented high levels of production because of its climatic conditions. An important factor for the activity´s major development is related to the introduction of the species Litopenaeus vannamei. The use of an exotic species can disturb the ecosystem. In the last decades, L. vannamei has been the only species cultivated in Brazilian farms, there not being an alternative species for shrimp culture. So, there is an urgent need to developing new studies with the native species, which might represent an alternative concerning shrimp production, with emphasis on Farfantepenaeus subtilis. Another important aspect related to the activity is feeding management, once it is quite usual that feed offer on the pond does not take into account either the species´ physiology and behavior or the influence of environmental variables, such as light cycle and substrate. That knowledge may optimize management and so reduce the impact of effluents in the environment. This study´s objective was characterizing feeding behavior of F. subtilis in laboratory. For that, an ethogram was developed, using 20 wild animals which were observed through ad libitum and all occurrences methods. Two experiments were developed in order to register feeding behavior on different substrates, along 15 days, each. In the first experiment, 40 animals were distributed in eight aquaria, half being observed during the light phase of the 24 hour cycle and the other half in the dark phase, both in halimeda substrate. In the second experiment, 20 animals were distributed in four aquaria, under similar conditions as the previous ones, but in sand substrate. In both experiments, animals were observed respectively one, four, seven and ten hours after the beginning of the phase, for light phase, for the dark phase, in ten minute observation windows, before and immediately after feed offer. The following behaviors were registered: feed ingestion, ingestion of other items, inactivity, exploration, vertical exploration, swimming, crawling, digging, burrowing, and moving by the animals. Observation windows after feed offer also included latency to reach the tray and to ingest feed. Nineteen behaviors were described for the species. F. subtilis presented more behavioral activities in halimeda substrate even in the light phase, while burrowing was predominant in sand substrate. In both substrates, moving, crawling and exploration were more frequent after feed offer, but inactivity and burrowing were more frequent before that. Feed ingestion was more frequent in halimeda, both in light and dark phases. Weight gain was also more prominent in that substrate. In sand substrtate, ingestion was more frequent in the dark phase, which suggests that higher granulometry facilitates feed ingestion in F. subtilis juveniles. Our results demonstrate the importance of studies for the better knowledge of the species, specially its response to environmental stimuli, in order to improve animal management