Shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions

A study was conducted on the shelf-life of rotary and solar tunnel dried SIS products under different packaging and storage conditions. Organoleptically dried products were found in good condition after a storage period of 60 days in ambient and chilled conditions. The moisture content, TVB-N value and bacterial load slightly increased during 60 days of storage in ambient and chilled conditions. The changes in moisture content and bacterial load were faster in ambient temperature than in chilled storage condition whereas changes in TVB-N value was higher in chilled condition than in ambient temperature. The initial moisture content was in the range of 13.71% to 22.84%. After 60 days of storage in ambient and chilled condition the moisture content of dried products was in the range of 15.09% to 25.11% and 14.49% to 25.01%, respectively. The initial TVB-N value was in the range of 10.64 to 17.52 mg/100g and after 60 days of storage in ambient and chilled condition, TVB-N value was in the range of 29.00 to 34.82 mg/100g and 31.41 to 39.11 mg/100g, respectively. The initial bacterial load was in the range of 1.91x10 super(8) to 2.84x10 super(8) and after 60 days of storage in ambient and chilled condition, the bacterial load was in the range of 6.2x10 super(8) to 1.8x10 super(9) and 5.75x10 super(7) to 5.05x10 super(8) CFU/g, respectively. The results of the present study indicated that it is necessary to store high quality dried products in sealed packed in chilled condition to ensure good quality up to a certain period of time.

Broodstock management: an integral part of hatchery techniques

The paper presents bighead carp broodstock management, an integral part of hatchery techniques as it will determine the quality of resulting fry and fingerlings. Proper methods on the selection and management of broodstock are discussed.

Study on the sustainability of FPC produced from Kilka (Clupeonella engrauliformis, C. grimmi and C. cultriventris) in two vacuum packaging and modified atmosphere packaging at different environmental factors

Fish protein concentrate (FPC) is a healthy, sustainable and high nutritive product which sanitized produced from fishes in which, protein and other nutrients are more concentrated than in fresh fishes. The aim of this research is to study on the sustainability of FPC produced from Kilka (Clupeonella engrauliformis , C. grimmi and C. cultriventris) in two Vaccum Packaging and Modified Atmosphere Packaging at different environmental factors during six months. In our study the analysis of FPC protein showed 91.2%, lipid: 0.5%, ash: 3.6%, moisture: 2.3%, Total Volatile Nitrogen: 10 ml/100gr and peroxide: 5meq/kg. Amino acids and fatty acids were also determined. Bacteria and Fungi were lower than 1000 colony. Samples are kept in different condition of temperature (5, 20 and 35 degree centigrade), humidity (25, 40 and 90 percent) and light and dark environment in six month. Lipid rate in FPC after 6 months in VP and MAP (60% C02, 30 % N2 and 10% O2), packages was decreased but was not significant (P>0.05). It was also detected that increase temperature lead to more decrease in lipid content. Protein rate of FPC was decreased from 91.2% to 73.6% during six months at 35°C in VP Package and from 91.2% to 69.4% in MAP package. These changes were significant (P<0.05). TVN and PV rate in FPC after 6 months in VP and MAP packages was increased but was significant (P<0.05). Amino acids and fatty acids were also determined. But more changes in MAP packages was detected.

AQD's breeding-hatchery techniques

Details are given of standardized methods used by AQD for the spawning of seabass (Lates calcarifer) and the rearing of fry in the hatchery.

Village level processing techniques

The agar-bearing seaweeds Gracilaria and Gelidium grow abundantly in the Asia-Pacific region. Production and post-harvest techniques and methods for processing Gracilaria to produce agar suitable for local market is necessary to increase the meager income of coastal dwellers. A flow diagram of a village level agar production is provided. A guide is also given for the quality of dried seaweeds, which are divided into 3 classes.

Farming techniques for seaweeds

Details are given of farming methods developed by the SEAFDEC Aquaculture Department for 3 different seaweeds: 1) Bottom line culture method for Kappaphycus; 2) Pond culture of Gracilaria; and, 3) Gracilariopsis bailinae, the new seaweed on the block.

Techniques to improve the shear strength of impacted bone graft: the effect of particle size and washing of the graft.

BACKGROUND: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. METHODS: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). RESULTS: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. CONCLUSIONS: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required.

Techniques to improve the shear strength of impacted bone graft: The effect of particle size and washing of the graft

Background: When fresh morselized graft is compacted, as in impaction bone-grafting for revision hip surgery, fat and marrow fluid is either exuded or trapped in the voids between particles. We hypothesized that the presence of incompressible fluid damps and resists compressive forces during impaction and prevents the graft particles from moving into a closer formation, thus reducing the graft strength. In addition, viscous fluid such as fat may act as an interparticle lubricant, thus reducing the interlocking of the particles. Methods: We performed mechanical shear testing in the laboratory with use of fresh-frozen human femoral-head allografts that had been passed through different orthopaedic bone mills to produce graft of differing particle-size distributions (grading). Results: After compaction of fresh graft, fat and marrow fluid continued to escape on application of normal loads. Washed graft, however, had little lubricating fluid and better contact between the particles, increasing the shear resistance. On mechanical testing, washed graft was significantly (p < 0.001) more resistant to shearing forces than fresh graft was. This feature was consistent for different bone mills that produced graft of different particle-size distributions and shear strengths. Conclusions: Removal of fat and marrow fluid from milled human allograft by washing the graft allows the production of stronger compacted graft that is more resistant to shear, which is the usual mode of failure. Further research into the optimum grading of particle sizes from bone mills is required. Clinical Relevance: Understanding the mechanical properties of milled human allograft is important when impaction grafting is used for mechanical support. A simple means of improving the mechanical strength of graft produced by currently available bone mills, including an intraoperative washing technique, is described.