991 resultados para multiconductor transmission lines
Resumo:
ABSTRACTINTRODUCTION:This study aimed to evaluate basic sanitation and socioeconomic indicators, reported cases of malaria, and risk of contracting malaria in the Ananindeua municipality, State of Pará.METHODS:Data on basic sanitation and socioeconomic dimensions were taken from the Brazilian Institute of Geography and Statistics [ Instituto Brasileiro de Geografia e Estatística (IBGE)] 2010 census. Epidemiological malaria information was taken from the Epidemiological Malaria Surveillance Information System [ Sistema de Informação de Vigilância Epidemiológica de Malária (SIVEP/Malaria)], between 2003 and 2013 of the Ministry of Health and from the SIVEP/Malaria forms of the municipality's Endemic Diseases Unit for 2,013 cases.RESULTS:Our data do not confirm the correlation among indicators of basic sanitation, socioeconomic conditions, and water supply with malaria cases. Of the 1,557 cases evaluated, most were caused by Plasmodium vivax , with rare cases of Plasmodium falciparum and mixed infections. There were 756 notifications in 2003. The number of reported cases was sharply reduced between 2006 and 2012, but a 142-case outbreak occurred in 2013. Ananindeua municipality's Annual Parasite Index indicated low risk in 2003 and no risk in other years, and the 2,013 cases were predominantly male individuals aged ≥40 years.CONCLUSIONS:Our data confirm the non-endemicity of malaria in the Ananindeua municipality, as the Annual Parasite Indices described for the years 2004-2013 classify it as a risk-free area. However, the 2013 outbreak indicates the need to strengthen prevention, surveillance, and control activities to reduce the risk of new outbreaks and consequent economic and social impacts on the population.
Resumo:
ABSTRACT INTRODUCTION: Emergent and re-emergent waterborne protozoans have become a worldwide public health problem, especially among vulnerable groups. METHODS: This cross-sectional study evaluated 17 HIV-infected children and their families. RESULTS: A high (76.5%) percentage of parasite-infected children was observed, even among children with CD4+ T-cell counts of >200 cells/mm3. Giardia spp., Cryptosporidium spp. and Cyclospora spp. were observed in 41.2% of these children Low income, poor hygiene practices, and co-infection in domestic, peridomestic and scholastic environments were significant sources of these intestinal infections. CONCLUSIONS: Early diagnosis, timely treatment, and socio-educational interventions may improve the health conditions of this vulnerable population.
Secondary transmission of cryptosporidiosis associated with well water consumption: two case studies
Resumo:
Abstract: Cryptosporidiosis is a very prominent disease in the field of public health, and usually causes diarrhea. We describe two immunocompetent patients who presented with chronic diarrhea that was ultimately found to be caused by continuous exposure to well water contaminated with the microbial cysts (oocysts) of the Cryptosporidium spp parasite. We describe the patients' histories and possible explanations for their prolonged symptoms.
Resumo:
Software Product Line (SPL) engineering aims at achieving efficient development of software products in a specific domain. New products are obtained via a process which entails creating a new configuration specifying the desired product’s features. This configuration must necessarily conform to a variability model, that describes the scope of the SPL, or else it is not viable. To ensure this, configuration tools are used that do not allow invalid configurations to be expressed. A different concern, however, is making sure that a product addresses the stakeholders’ needs as best as possible. The stakeholders may not be experts on the domain, so they may have unrealistic expectations. Also, the scope of the SPL is determined not only by the domain but also by limitations of the development platforms. It is therefore possible that the desired set of features goes beyond what is possible to currently create with the SPL. This means that configuration tools should provide support not only for creating valid products, but also for improving satisfaction of user concerns. We address this goal by providing a user-centric configuration process that offers suggestions during the configuration process, based on the use of soft constraints, and identifying and explaining potential conflicts that may arise. Suggestions help mitigating stakeholder uncertainty and poor domain knowledge, by helping them address well known and desirable domain-related concerns. On the other hand, automated conflict identification and explanation helps the stakeholders to understand the trade-offs required for realizing their vision, allowing informed resolution of conflicts. Additionally, we propose a prototype-based approach to configuration, that addresses the order-dependency issues by allowing the complete (or partial) specification of the features in a single step. A subsequent resolution process will then identify possible repairs, or trade-offs, that may be required for viabilization.
Resumo:
Poliomyelitis associated with live strain vaccine is defined as the paralytic form of the acute anterior poliomyelitis related to the vaccine strain. Since these strains behave similarly to the wild-type virus, we can differentiate, epidemiologically, two types of vaccine-associated poliomyelitis: cases in which the patient was vaccinated and cases in which the patient had had contact with vaccinated individuals. We herein present the case of an unvaccinated child, with a clinical picture of an acute anterior poliomyelitis associated with the live strain vaccine, whose brother received the Sabin vaccine 20 days before the onset of the symptoms. Vaccine strain of the type 3 poliovirus was isolated in fecal culture and a presented mutation in nucleotide 472 (C®U) in the 5' non-coding region, which is strongly related to the higher strain virulence.
Resumo:
Mansonella ozzardi is transmitted by two dipterian families, Ceratopogonidae (midges) and Simuliidae (black flies). In Brazil, black flies are vectors for this filariasis until now. In this paper, we determined the seasonality, parity capacity and parasitic infection rate of Cerqueirellum argentiscutum. The work was carried out in the Porto Japão community, Lower Solimões River, Amazonas, Brazil. Results show that the black flies were more abundant during the rainy season (from December to May). The number of parous flies was higher in every sampling during the course of year. Monthly Biting Rate (MBR1 123742.00, MBR2 86701.50) was high, although Parasitic Infection Rate (PIR1 0.06, PIR2 0.08) and Annual Transmission Potential (ATP 7.25) were low in numbers.
Resumo:
This work reports the implemen tation and verification of a new so lver in OpenFOAM® open source computational library, able to cope w ith integral viscoelastic models based on the integral upper-convected Maxwell model. The code is verified through the comparison of its predictions with anal ytical solutions and numerical results obtained with the differential upper-convected Maxwell model
Resumo:
Wireless body sensor networks (WBSNs) constitute a key technology for closing the loop between patients and healthcare providers, as WBSNs provide sensing ability, as well as mobility and portability, essential characteristics for wide acceptance of wireless healthcare technology. However, one important and difficult aspect of WBSNs is to provide data transmissions with quality of service, among other factors due to the antennas being small size and placed close to the body. Such transmissions cannot be fully provided without the assumption of a MAC protocol that solves the problems of the medium sharing. A vast number of MAC protocols conceived for wireless networks are based on random or scheduled schemes. This paper studies firstly the suitability of two MAC protocols, one using CSMA and the other TDMA, to transmit directly to the base station the signals collected continuously from multiple sensor nodes placed on the human body. Tests in a real scenario show that the beaconed TDMA MAC protocol presents an average packet loss ratio lower than CSMA. However, the average packet loss ratio is above 1.0 %. To improve this performance, which is of vital importance in areas such as e-health and ambient assisted living, a hybrid TDMA/CSMA scheme is proposed and tested in a real scenario with two WBSNs and four sensor nodes per WBSN. An average packet loss ratio lower than 0.2 % was obtained with the hybrid scheme. To achieve this significant improvement, the hybrid scheme uses a lightweight algorithm to control dynamically the start of the superframes. Scalability and traffic rate variation tests show that this strategy allows approximately ten WBSNs operating simultaneously without significant performance degradation.
Resumo:
A new integrated mathematical model for the simulation of an offshore wind system having a rectifier input voltage malfunction at one phase is presented in this paper. The mathematical model considers an offshore variable-speed wind turbine on a floating platform, equipped with a permanent magnet synchronous generator using full-power three-level converter to inject energy into the electric network, through a high voltage direct current transmission submarine cable. The model for the drive train is a discrete three mass, incorporating the dynamic of the moving surface. A case study is presented to access conclusion about the malfunction.
Resumo:
We investigate the low-energy electronic transport across grain boundaries in graphene ribbons and infinite flakes. Using the recursive Green’s function method, we calculate the electronic transmission across different types of grain boundaries in graphene ribbons. We show results for the charge density distribution and the current flow along the ribbon. We study linear defects at various angles with the ribbon direction, as well as overlaps of two monolayer ribbon domains forming a bilayer region. For a class of extended defect lines with periodicity 3, an analytic approach is developed to study transport in infinite flakes. This class of extended grain boundaries is particularly interesting, since the K and K0 Dirac points are superposed.
Resumo:
Existing data supports Portugal as the Western Europe country with highest HIV-1 subtype diversity. However, detailed phylogenetic studies of Portuguese HIV-1 epidemics are still scarce. Thus, our main goal was to analyze the phylodynamics of a local HIV-1 infection in the Portuguese region of Minho. Molecular epidemiological analysis was applied to data from 289 HIV-1 infected individuals followed in the reference Hospital of the province of Minho, Portugal, in which isolated viruses had been sequenced between 2000 and 2012. Viruses of the G (29.1%) and B (27.0%) subtypes were the most frequent, followed by recombinant forms (17.6%), C (14.5%), F1 (7.3%) and A1 (4.2%) subtypes. Multinomial logistic regression revealed that the odds of being infected with A1 and F1 subtype increased over the years when compared with B, G, C or recombinant viruses. As expected, polyphyletic patterns suggesting multiple and old introductions of subtypes B and G were found. However, transmission clusters of non-B and -G viruses among native individuals were also found with the dates of the most recent common ancestor estimated to the early 2000s. Our study supports that the HIV-1 subtype diversity in the Portuguese region of Minho is high and has been increasing in a manner that is apparently driven by factors other than immigration and international travel. Infections with A1 and F1 viruses in the region of Minho are becoming established and were mainly found in sexually transmitted clusters, reinforcing the need for more efficacious control measures targeting this infection route.
Resumo:
Software product lines (SPL) are diverse systems that are developed using a dual engineering process: (a)family engineering defines the commonality and variability among all members of the SPL, and (b) application engineering derives specific products based on the common foundation combined with a variable selection of features. The number of derivable products in an SPL can thus be exponential in the number of features. This inherent complexity poses two main challenges when it comes to modelling: Firstly, the formalism used for modelling SPLs needs to be modular and scalable. Secondly, it should ensure that all products behave correctly by providing the ability to analyse and verify complex models efficiently. In this paper we propose to integrate an established modelling formalism (Petri nets) with the domain of software product line engineering. To this end we extend Petri nets to Feature Nets. While Petri nets provide a framework for formally modelling and verifying single software systems, Feature Nets offer the same sort of benefits for software product lines. We show how SPLs can be modelled in an incremental, modular fashion using Feature Nets, provide a Feature Nets variant that supports modelling dynamic SPLs, and propose an analysis method for SPL modelled as Feature Nets. By facilitating the construction of a single model that includes the various behaviours exhibited by the products in an SPL, we make a significant step towards efficient and practical quality assurance methods for software product lines.
Resumo:
Abstract Dataflow programs are widely used. Each program is a directed graph where nodes are computations and edges indicate the flow of data. In prior work, we reverse-engineered legacy dataflow programs by deriving their optimized implementations from a simple specification graph using graph transformations called refinements and optimizations. In MDE-speak, our derivations were PIM-to-PSM mappings. In this paper, we show how extensions complement refinements, optimizations, and PIM-to-PSM derivations to make the process of reverse engineering complex legacy dataflow programs tractable. We explain how optional functionality in transformations can be encoded, thereby enabling us to encode product lines of transformations as well as product lines of dataflow programs. We describe the implementation of extensions in the ReFlO tool and present two non-trivial case studies as evidence of our work’s generality
Resumo:
Tese de Doutoramento em Biologia das Plantas - MAP BIOPLANT