On the domain decomposition and transmission line modelling finite element method for time-domain induction motor analysis

This paper demonstrates how a finite element model which exploits domain decomposition is applied to the analysis of three-phase induction motors. It is shown that a significant gain in cpu time results when compared with standard finite element analysis. Aspects of the application of the method which are particular to induction motors are considered: the means of improving the convergence of the nonlinear finite element equations; the choice of symmetrical sub-domains; the modelling of relative movement; and the inclusion of periodic boundary conditions. © 1999 IEEE.

A comparison of power losses for small (< 1 kW) induction motor drives adopting squarewave and sinusoidal PWM excitation

In this paper the influence of the form of motor excitation on the performance of a small (< 1 kW) induction motor drive is studied. Two forms of excitation, namely sine waves generated by pulse width modulation and simple square wave are explored. Sine wave excitation gives lower motor losses but increases inverter losses. Conversely, square wave excitation increases motor losses but decreases inverter losses. Losses have been measured directly by calorimetric means or, in the case of the inverter, predicted by a Pspice model that has been verified by calorimetric methods. The work shows that overall, the use of square wave excitation leads to a more efficient drive. © 2004 The Institution of Electrical Engineers.

Poverty in the fisheries, inductors, causes and intervention

The study is prompted by the poverty that persisted among the fishing communities of lake victoria at time of considerable cash inflow into the fisheries development of fish processing industry. There has been need for understanding of the poverty and what strategies would be most appreciate for it's reduction.This study has attempted to respond to the needby identifying the nature and distribution of the poverty within the fisheries lake victoria,Uganda, the factor responsible for itand the options for poverty reduction intervention. The study examined the global and regional perspectives of poverty and wealth distribution, noting that wide disparities existed between the developed and the developing world and also between the developing countries themselves. A historical review of development policies and strategies revealed that while successive strategies were able to contribute to growth, their achievement towards poverty alleviation were less than satisfactory, hence the need for continually developing new strategies. A background to Uganda’s society and economy is provided, examining the demographic, political, environmental and economic conditions of the country. Uganda’s development strategies are reviewed, highlighting the role of the Poverty Eradication Action Plan, Uganda’s main strategy for implementing the policy of poverty reduction and wealth distribution. At the agricultural sector level, the Plan for the Modernisation of Agriculture has been formulated, followed by the National Fisheries Policy, aimed at providing a policy framework for the management and development of the fisheries. An appropriate definition of poverty was formulated, considered relevant to the situation of Lake Victoria. The dimensions of poverty included inadequate basic necessities, low education and health achievements, a sense of insecurity and exposure to risk. The research methodology was enhanced by the examination of the Lélé Model of the Poverty–Environmental Degradation problem, the World Bank Model of Poverty Causation and the subsequent Lake Victoria Model developed in this study. It has provided a plan for the research, the consideration of criteria and a data collection plan. The data collection instruments included secondary data search, key informant interviews and a sample survey based on a structured questionnaire. The study identified all the four dimensions of poverty in the fisheries, provided poverty profiles with respect to the different activities, groups of people and regions in the fisheries, based on consumption poverty. Among the people identified to be in poverty were the fishing labourers, fishers of Oreochromis niloticus and those operating with non-powered boats. In the post-harvest fisheries, large proportions of processors involved in salting and sun-drying, market stall and bicycle traders were in the poverty category. The ethnic groups most affected included the Samia, Basoga and Bakenye while the Districts of Jinja, Bugiri and Busia had the highest proportions of fishers in the poverty category. With respect to the other dimensions of poverty, the study showed that educational achievement was low within the fishing communities. The health status was poor, due mainly to the prevalence of malaria, diarrhoea, bilharzia and HIV/AIDS. There was a sense of insecurity within certain sections of the fishing community, due to leadership weaknesses within the local as well as the Government institutions. Some community members operated in a state of risk because they were vulnerable to episodes of income, health and education. The causes of poverty in fisheries included weaknesses within the institutional and social environment, limitations in the technology available to the poor, resource degradation and unfavourable economic factors. The recommendations of the study for poverty reduction included strengthening of policies, developing links, improving capacities and increasing resources, to be applied at the levels of Central Government, Local Government and of the community. In view of the achievements of the methodology used on this study, involving reference to the models, it is recommended that future research should build upon this model approach, as it will continue to produce results, especially when attempting to forecast changes relating to interventions.

Duty cycle and modelling considerations in three-phase induction motor drives for washing machines

Three-phase induction motors offer significant advantages over commutator motors in some domestic appliances. Models for wide speed range three-phase induction motors for use in a horizontal axis washing machine have been developed using the MEGA finite element package with an external formulation for calculating iron losses. Motor loss predictions have been verified using a novel high accuracy calorimeter. Good agreement has been observed over a wide speed range at different loadings. The model is used to predict motor temperature rise under typical washing machine loading conditions to ensure its limiting temperature is not exceeded and enables alternative designs to be investigated without recourse to physical prototypes. © 2005 IEEE.

Impact of PWM schemes on induction motor losses

This paper presents the results of an investigation into the impact of pulse width modulation (PWM) switching schemes on power losses in induction motors and their inverter drives. The PWM schemes considered include sinusoidal PWM, spacevector PWM and discontinuous PWM. Both experimental results and simulated predictions are presented for fractional horsepower and small integral horsepower motors. Direct loss measurements have been carried out using a calorimetric test rig; detailed simulations of the skewed motors have been carried out using multi-slice time-stepped 2D FEA. The simulated and measured losses under the different modulation schemes are compared and discussed. © 2006 IEEE.

Loss comparison between an SPWM and harmonic elimination excited small, (<1kW) induction motor drive using Pspice simulation and calorimetry

Adopting square wave excitation to drive induction motors (IMs) can substantially reduce inverter switching losses. However, the low-order time harmonics inherent in the output voltage generates parasitic torques that degrade motor performance and reduce efficiency. In this paper, a novel harmonic elimination modulation technique with full voltage control is studied as an interesting and alternative means of operating small (<1kW) IM drives efficiently. A fully verified harmonic elimination scheme, which removes the 5th, 7th, 11th, 13th and 17 th time harmonics, was implemented and applied to an IGBT driven IM. The power losses incurred in the inverter and the IM as a result of the switching scheme have been determined. © 2008 Crown copyright.

Pulsed field magnetization of a high temperature superconducting motor

As we known, the high temperature (77 K) superconducting (HTS) motor is considered as a competitive electrical machine by more and more people. There have been various of designs for HTS motor in the world. However, most of them focus on HTS tapes rather than bulks. Therefore, in order to investigate possibility of HTS bulks on motor application, a HTS magnet synchronous motor which has 75 pieces of YBCO bulks surface mounted on the rotor has been designed and developed in Cambridge University. After pulsed field magnetization (PFM) process, the rotor can trap a 4 poles magnetic field of 375 mT. The magnetized rotor can provide a maximum torque of 49.5 Nm and a maximum power of 7.8 kW at 1500 rpm. © 2010 IEEE.

Short- and long-term changes in joint co-contraction associated with motor learning as revealed from surface EMG.

In the field of motor control, two hypotheses have been controversial: whether the brain acquires internal models that generate accurate motor commands, or whether the brain avoids this by using the viscoelasticity of musculoskeletal system. Recent observations on relatively low stiffness during trained movements support the existence of internal models. However, no study has revealed the decrease in viscoelasticity associated with learning that would imply improvement of internal models as well as synergy between the two hypothetical mechanisms. Previously observed decreases in electromyogram (EMG) might have other explanations, such as trajectory modifications that reduce joint torques. To circumvent such complications, we required strict trajectory control and examined only successful trials having identical trajectory and torque profiles. Subjects were asked to perform a hand movement in unison with a target moving along a specified and unusual trajectory, with shoulder and elbow in the horizontal plane at the shoulder level. To evaluate joint viscoelasticity during the learning of this movement, we proposed an index of muscle co-contraction around the joint (IMCJ). The IMCJ was defined as the summation of the absolute values of antagonistic muscle torques around the joint and computed from the linear relation between surface EMG and joint torque. The IMCJ during isometric contraction, as well as during movements, was confirmed to correlate well with joint stiffness estimated using the conventional method, i.e., applying mechanical perturbations. Accordingly, the IMCJ during the learning of the movement was computed for each joint of each trial using estimated EMG-torque relationship. At the same time, the performance error for each trial was specified as the root mean square of the distance between the target and hand at each time step over the entire trajectory. The time-series data of IMCJ and performance error were decomposed into long-term components that showed decreases in IMCJ in accordance with learning with little change in the trajectory and short-term interactions between the IMCJ and performance error. A cross-correlation analysis and impulse responses both suggested that higher IMCJs follow poor performances, and lower IMCJs follow good performances within a few successive trials. Our results support the hypothesis that viscoelasticity contributes more when internal models are inaccurate, while internal models contribute more after the completion of learning. It is demonstrated that the CNS regulates viscoelasticity on a short- and long-term basis depending on performance error and finally acquires smooth and accurate movements while maintaining stability during the entire learning process.

Task-dependent coordination of rapid bimanual motor responses.

Optimal feedback control postulates that feedback responses depend on the task relevance of any perturbations. We test this prediction in a bimanual task, conceptually similar to balancing a laden tray, in which each hand could be perturbed up or down. Single-limb mechanical perturbations produced long-latency reflex responses ("rapid motor responses") in the contralateral limb of appropriate direction and magnitude to maintain the tray horizontal. During bimanual perturbations, rapid motor responses modulated appropriately depending on the extent to which perturbations affected tray orientation. Specifically, despite receiving the same mechanical perturbation causing muscle stretch, the strongest responses were produced when the contralateral arm was perturbed in the opposite direction (large tray tilt) rather than in the same direction or not perturbed at all. Rapid responses from shortening extensors depended on a nonlinear summation of the sensory information from the arms, with the response to a bimanual same-direction perturbation (orientation maintained) being less than the sum of the component unimanual perturbations (task relevant). We conclude that task-dependent tuning of reflexes can be modulated online within a single trial based on a complex interaction across the arms.