Transferring QTL technology to the pig breeding industry (PigQTech) - a demonstration project

The aim of the project has been to demonstrate how the farm animal breeding industry can utilise gene mapping technology to accelerate genetic improvement. Previous theoretical studies had suggested that the use of marker assisted selection could potentially increase the annual improvement for quantitative traits like backfat with about 10% and for more difficult traits such as meat quality and reproduction by as much as 40-60% compared with existing technology. The work has comprised two major tasks: 1. Commercially relevant populations have been screened for segregation at QTLs identified in experimental populations. The aim has been to establish optimal strategies for QTL detection in commercial pig populations and the extent to which QTLs explaining major phenotypic differences between divergent lines used in experimental studies also explain quantitative variation within commercial lines. The results are important for specifying future strategies for finding economically valuable QTLs. 2. Marker assisted backcrossing has been used to demonstrate how a QTL allele can be introgressed from one breed to another. The work has focused on the major fatness QTL on pig chromosome 4 previously identified in a wild pig/Large White intercross. The end result was not designed to be a commercially viable product in its own right, but the process has validated a number of points of major importance for the exploitation of QTLs in livestock.

Diagnosing pulmonary embolism in outpatients with clinical assessment, D-dimer measurement, venous ultrasound, and helical computed tomography: a multicenter management study.

PURPOSE: To evaluate a diagnostic strategy for pulmonary embolism that combined clinical assessment, plasma D-dimer measurement, lower limb venous ultrasonography, and helical computed tomography (CT). METHODS: A cohort of 965 consecutive patients presenting to the emergency departments of three general and teaching hospitals with clinically suspected pulmonary embolism underwent sequential noninvasive testing. Clinical probability was assessed by a prediction rule combined with implicit judgment. All patients were followed for 3 months. RESULTS: A normal D-dimer level (<500 microg/L by a rapid enzyme-linked immunosorbent assay) ruled out venous thromboembolism in 280 patients (29%), and finding a deep vein thrombosis by ultrasonography established the diagnosis in 92 patients (9.5%). Helical CT was required in only 593 patients (61%) and showed pulmonary embolism in 124 patients (12.8%). Pulmonary embolism was considered ruled out in the 450 patients (46.6%) with a negative ultrasound and CT scan and a low-to-intermediate clinical probability. The 8 patients with a negative ultrasound and CT scan despite a high clinical probability proceeded to pulmonary angiography (positive: 2; negative: 6). Helical CT was inconclusive in 11 patients (pulmonary embolism: 4; no pulmonary embolism: 7). The overall prevalence of pulmonary embolism was 23%. Patients classified as not having pulmonary embolism were not anticoagulated during follow-up and had a 3-month thromboembolic risk of 1.0% (95% confidence interval: 0.5% to 2.1%). CONCLUSION: A noninvasive diagnostic strategy combining clinical assessment, D-dimer measurement, ultrasonography, and helical CT yielded a diagnosis in 99% of outpatients suspected of pulmonary embolism, and appeared to be safe, provided that CT was combined with ultrasonography to rule out the disease.

Wireless GPS-based phase-locked synchronization system for outdoor environment.

Synchronization of data coming from different sources is of high importance in biomechanics to ensure reliable analyses. This synchronization can either be performed through hardware to obtain perfect matching of data, or post-processed digitally. Hardware synchronization can be achieved using trigger cables connecting different devices in many situations; however, this is often impractical, and sometimes impossible in outdoors situations. The aim of this paper is to describe a wireless system for outdoor use, allowing synchronization of different types of - potentially embedded and moving - devices. In this system, each synchronization device is composed of: (i) a GPS receiver (used as time reference), (ii) a radio transmitter, and (iii) a microcontroller. These components are used to provide synchronized trigger signals at the desired frequency to the measurement device connected. The synchronization devices communicate wirelessly, are very lightweight, battery-operated and thus very easy to set up. They are adaptable to every measurement device equipped with either trigger input or recording channel. The accuracy of the system was validated using an oscilloscope. The mean synchronization error was found to be 0.39 μs and pulses are generated with an accuracy of <2 μs. The system provides synchronization accuracy about two orders of magnitude better than commonly used post-processing methods, and does not suffer from any drift in trigger generation.

The Measurement of social polarization in a multi-group context

Polarization indices presented up to now have only focused their attention on the distribution of income/wealth. However, in many circumstances income is not the only relevant dimension that might be the cause of social conflict, so it is very important to have a social polarization index able to cope with alternative dimensions. In this paper we present an axiomatic characterization of one of such indices: it has been obtained as an extension of the (income) polarization measure introduced in Duclos, Esteban and Ray (2004) to a wider domain. It turns out that the axiomatic structure introduced in that paper alone is not appropriate to obtain a fully satisfactory characterization of our measure, so additional axioms are proposed. As a byproduct, we present an alternative axiomatization of the aforementioned income polarization measure.

Ambulatory blood pressure measurement and antihypertensive therapy.

The traditional basis for assessing the effect of antihypertensive therapy is the blood pressure reading taken by a physician. However, several recent trials have been designed to evaluate the blood pressure lowering effect of various therapeutic agents during the patients' normal daytime activities, using a portable, semi-automatic blood pressure recorder. The results have shown that in a given patient, blood pressure measured at the physician's office often differs greatly from that prevailing during the rest of the day. This is true both in treated and untreated hypertensive patients. The difference between office and ambulatory recorded pressures cannot be predicted from blood pressure levels measured by the physician. Therefore, a prospective study was carried out in patients with diastolic blood pressures that were uncontrolled at the physician's office despite antihypertensive therapy. The purpose was to evaluate the response of recorded ambulatory blood pressure to treatment adjustments aimed at reducing office blood pressure below a pre-set target level. Only patients with high ambulatory blood pressures at the outset appeared to benefit from further changes in therapy. Thus, ambulatory blood pressure monitoring can be used to identify those patients who remain hypertensive only when facing the physician, despite antihypertensive therapy. Ambulatory monitoring could thus help to evaluate the efficacy of antihypertensive therapy and allow individual treatment.

Automatic measurement of key ski jumping phases and temporal events with a wearable system.

We propose a new method, based on inertial sensors, to automatically measure at high frequency the durations of the main phases of ski jumping (i.e. take-off release, take-off, and early flight). The kinematics of the ski jumping movement were recorded by four inertial sensors, attached to the thigh and shank of junior athletes, for 40 jumps performed during indoor conditions and 36 jumps in field conditions. An algorithm was designed to detect temporal events from the recorded signals and to estimate the duration of each phase. These durations were evaluated against a reference camera-based motion capture system and by trainers conducting video observations. The precision for the take-off release and take-off durations (indoor < 39 ms, outdoor = 27 ms) can be considered technically valid for performance assessment. The errors for early flight duration (indoor = 22 ms, outdoor = 119 ms) were comparable to the trainers' variability and should be interpreted with caution. No significant changes in the error were noted between indoor and outdoor conditions, and individual jumping technique did not influence the error of take-off release and take-off. Therefore, the proposed system can provide valuable information for performance evaluation of ski jumpers during training sessions.

ZigBee aplicado a la transmisión de datos de sensores biomédicos

Pensado en un ámbito de tecnología médica, el propósito principal es el de realizar un seguido de medidas en diferentes partes del cuerpo para establecer unos valores máximos que nos permitan detectar cuando un paciente empieza a padecer estrés. Para ello se necesita un proceso de medición y otro de transmisión de los datos. Es aquí donde aparece el trabajo realizado en el proyecto. “ZigBee aplicado a la transmisión de datos de sensores biomédicos” está pensado para realizar la tarea de transmisión de los datos desde que el sensor realiza la medida hasta que los datos son monitorizados y almacenados. En la memoria del proyecto podremos encontrar el estudio realizado al medio de transmisión inalámbrico utilizado (ZigBee), el análisis del kit eZ430-RF2500 compatible con el medio, y finalmente la implementación del proyecto. Todo este trabajo finalizará con la recepción satisfactoria de los datos medidos por nuestro sensor biomédico (oxímetro) en el aplicativo personal programado con Visual Basic.

Adolescent Drug Abuse Diagnosis (ADAD) vs. Health of Nation Outcome Scale for Children and Adolescents (HoNOSCA) in clinical outcome measurement.

BACKGROUND: The Adolescent Drug Abuse Diagnosis (ADAD) and Health of Nation Outcome Scales for Children and Adolescents (HoNOSCA) are both measures of outcome for adolescent mental health services. AIMS: To compare the ADAD with HoNOSCA; to examine their clinical usefulness. METHODS: Comparison of the ADAD and HoNOSCA outcome measures of 20 adolescents attending a psychiatric day care unit. RESULTS: ADAD change was positively correlated with HoNOSCA change. HoNOSCA assesses the clinic's day-care programme more positively than the ADAD. The ADAD detects a group for which the mean score remains unchanged whereas HoNOSCA does not. CONCLUSIONS: A good convergent validity emerges between the two assessment tools. The ADAD allows an evidence-based assessment and generally enables a better subject discrimination than HoNOSCA. HoNOSCA gives a less refined evaluation but is more economic in time and possibly more sensitive to change. Both assessment tools give useful information and enabled the Day-care Unit for Adolescents to rethink the process of care and of outcome, which benefited both the institution and the patients.

Why is it so Hard to Value Intangibles? Evidence from Investments in High-Technology Start-Ups

The paper uses a range of primary-source empirical evidence to address the question: ‘why is it to hard to value intangible assets?’ The setting is venture capital investment in high technology companies. While the investors are risk specialists and financial experts, the entrepreneurs are more knowledgeable about product innovation. Thus the context lends itself to analysis within a principal-agent framework, in which information asymmetry may give rise to adverse selection, pre-contract, and moral hazard, post-contract. We examine how the investor might attenuate such problems and attach a value to such high-tech investments in what are often merely intangible assets, through expert due diligence, monitoring and control. Qualitative evidence is used to qualify the more clear cut picture provided by a principal-agent approach to a more mixed picture in which the ‘art and science’ of investment appraisal are utilised by both parties alike

Firms in Scottish High Technology Clusters: software, life sciences, microelectronics, optoelectronics and digital media – preliminary evidence and analysis on firm size, growth and optimality

This paper reports on: (a) new primary source evidence on; and (b) statistical and econometric analysis of high technology clusters in Scotland. It focuses on the following sectors: software, life sciences, microelectronics, optoelectronics, and digital media. Evidence on a postal and e-mailed questionnaire is presented and discussed under the headings of: performance, resources, collaboration & cooperation, embeddedness, and innovation. The sampled firms are characterised as being small (viz. micro-firms and SMEs), knowledge intensive (largely graduate staff), research intensive (mean spend on R&D GBP 842k), and internationalised (mainly selling to markets beyond Europe). Preliminary statistical evidence is presented on Gibrat’s Law (independence of growth and size) and the Schumpeterian Hypothesis (scale economies in R&D). Estimates suggest a short-run equilibrium size of just 100 employees, but a long-run equilibrium size of 1000 employees. Further, to achieve the Schumpeterian effect (of marked scale economies in R&D), estimates suggest that firms have to grow to very much larger sizes of beyond 3,000 employees. We argue that the principal way of achieving the latter scale may need to be by takeovers and mergers, rather than by internally driven growth.

On the characterisation and measurement of the welfare effects of income mobility from an ex-ante perspective

The paper employs a rank-dependent formulation of the social welfare function with time-separable utilities to evaluate the economic consequences of income mobility from an ex-ante perspective. The resultant class of measures can be decomposed not only in terms of structural and exchange mobility but also in terms of vertical and horizontal mobility, thereby encompassing two of the main approaches in the literature. We illustrate our measurement framework by comparing mobility in the USA and Germany using data from the Cross-National Equivalent File 1980-2005. We find that the pattern of income mobility in the USA was both less pro-poor and more horizontally inequitable than in Germany, but that the latter did not translate into higher levels of exchange mobility given higher levels of absolute inequality and the vertical stance of the growth process.

Technology shocks and aggregate fluctuations in an estimated hybrid RBC model

This paper contributes to the on-going empirical debate regarding the role of the RBC model and in particular of technology shocks in explaining aggregate fluctuations. To this end we estimate the model’s posterior density using Markov-Chain Monte-Carlo (MCMC) methods. Within this framework we extend Ireland’s (2001, 2004) hybrid estimation approach to allow for a vector autoregressive moving average (VARMA) process to describe the movements and co-movements of the model’s errors not explained by the basic RBC model. The results of marginal likelihood ratio tests reveal that the more general model of the errors significantly improves the model’s fit relative to the VAR and AR alternatives. Moreover, despite setting the RBC model a more difficult task under the VARMA specification, our analysis, based on forecast error and spectral decompositions, suggests that the RBC model is still capable of explaining a significant fraction of the observed variation in macroeconomic aggregates in the post-war U.S. economy.