Monitoring of Finnish arable land : changes in soil quality between 1987 and 1998

Selostus: Suomalaisten viljelymaiden tilan seuranta : muutoksia peltojen ominaisuuksissa aikavälillä 1987-1998

A Feasibility Study on Embedded Micro-Electromechanical Sensors and Systems (MEMS) for Monitoring Highway Structures, TR-575, 2011

Micro-electromechanical systems (MEMS) provide vast improvements over existing sensing methods in the context of structural health monitoring (SHM) of highway infrastructure systems, including improved system reliability, improved longevity and enhanced system performance, improved safety against natural hazards and vibrations, and a reduction in life cycle cost in both operating and maintaining the infrastructure. Advancements in MEMS technology and wireless sensor networks provide opportunities for long-term continuous, real-time structural health monitoring of pavements and bridges at low cost within the context of sustainable infrastructure systems. The primary objective of this research was to investigate the use of MEMS in highway structures for health monitoring purposes. This study focused on investigating the use of MEMS and their potential applications in concrete through a comprehensive literature review, a vendor survey, and a laboratory study, as well as a small-scale field study. Based on the comprehensive literature review and vendor survey, the latest information available on off-the-shelf MEMS devices, as well as research prototypes, for bridge, pavement, and traffic applications were synthesized. A commercially-available wireless concrete monitoring system based on radio-frequency identification (RFID) technology and off-the-shelf temperature and humidity sensors were tested under controlled laboratory and field conditions. The test results validated the ability of the RFID wireless concrete monitoring system in accurately measuring the temperature both inside the laboratory and in the field under severe weather conditions. In consultation with the project technical advisory committee (TAC), the most relevant MEMS-based transportation infrastructure research applications to explore in the future were also highlighted and summarized.

Monitoring one-year compliance to antihypertension medication in the Seychelles.

OBJECTIVE: To examine the compliance to medication among newly diagnosed hypertensive patients screened from the general population of the Seychelles, a rapidly developing country. METHODS: Among the 1067 participants to a population-based survey for cardiovascular risk factors, hypertension was discovered in 50 (previously unaware of having hypertension and having blood pressure > or = 160/95 mmHg over 3 visits). These 50 patients were placed on a daily one-pill regimen of medication (bendrofluazide, atenolol, or a combination of hydrochlorothiazide and atenolol) and compliance to the regimen was assessed over 12 months using electronic pill containers. Satisfactory compliance was defined as taking the medication on 6 or 7 days a week on average (which corresponds to a mean compliance level of > or = 86%). FINDINGS: In the first month, fewer than half (46%) of the new hypertension patients achieved satisfactory compliance, and only about one-quarter (26%) achieved this level by the twelfth month. Compliance was better among the 23 participants who regularly attended medical follow-up, with nearly three-quarters of these patients (74%) achieving satisfactory compliance during the first month and over one-half (55%) by the twelfth month. There was a direct association between mean 12-month compliance level and having a highly skilled occupation; having good health awareness; and regularly attending medical appointments. In contrast, there was an inverse relationship between mean compliance level and heavy drinking. CONCLUSION: The low proportion of people selected from the general population who were capable of sustaining satisfactory compliance to antihypertension medication may correspond to the maximum effectiveness of medication interventions based on a screening and treatment strategy in the general population. The results stress the need for both high-risk and population approaches to improve hypertension control.

Parental monitoring: a way to decrease substance use among Swiss adolescents?

The objective of this research was to determine whether the level of parental monitoring is associated with substance use among adolescents in Switzerland, and to assess whether this effect remains when these adolescents have consuming peers. For this purpose, we used a nationally representative sample from the Swiss participation in the 2007 European School Project on Alcohol and Other Drugs survey, which included 7,611 adolescents in public schools (8th-10th grades). Four levels of parental control were created and four substances (tobacco, alcohol, cannabis, and ecstasy) were analyzed. All significant variables at the bivariate level were included in the multivariate analysis. Most adolescents had a high level of parental monitoring and that was associated with younger age, females, high socioeconomic status, intact family structure, and satisfactory relationships with mother, father, and peers. Overall, substance use decreased as parental monitoring increased and high parental monitoring decreased as having consuming peers increased. Results remained essentially the same when the variable "having consuming peers" was added to the analysis. Conclusion: parental monitoring is associated to positive effects on adolescent substance use with a reduction of consumption and a lower probability of having consuming peers, which seems to protect adolescents against potentially negative peer influence. Encouraging parents to monitor their adolescents' activities and friendships by establishing rules about what is allowed or not is a way to limit the negative influence of consuming peers on adolescent substance use.

An Evaluation of the Consolidation Monitoring Device, HR-1013, 1978

The Iowa Department of Transportation research project HR-1013 is the evaluation of a prototype continuous monitoring nuclear density unit. The Unit, the Consolidation Monitoring Device (CMD), mounts on the rear of a slip-form paver and measures the density of the concrete while still in the plastic state. The evaluation performed determined the usefulness, accuracy, precision and reproducibility of the unit. The CMD was calibrated and tested in the laboratory for one week before field evaluation. The field evaluation consisted of monitoring at least 5 miles of paving and then correlating the CMD data with two conventional density methods. The two supplemental methods were density measurement with a Troxler nuclear gauge and densities obtained from core samples.

Evaluation of Paver Vibrator Frequency Monitoring and Concrete Consolidation, HR-1068, 1999

Identification of ways to enhance consistency and proper entrained air content in hardened concrete pavement has long been a goal of state highway agencies and the Federal Highway Administration. The work performed in this study was done under FHWA Work Order No: DTFH71-97-PTP-IA-47 and referred to as Project HR-1068 by the Iowa DOT. The results of this study indicate that the monitoring devices do provide both the contractor and contracting authority and are a good way of controlling the consistent rate of vibration to achieve a quality concrete pavement product. The devices allow the contractor to monitor vibrator operation effectively and consistently. The equipment proved to be reliable under all weather and paver operating conditions. This type of equipment adds one more way of improving the consistency and quality of the concrete pavement.

Parenchymal brain oxygen monitoring in the neurocritical care unit.

Patients admitted to the neurocritical care unit (NCCU) often have serious conditions that can be associated with high morbidity and mortality. Pharmacologic agents or neuroprotectants have disappointed in the clinical environment. Current NCCU management therefore is directed toward identification, prevention, and treatment of secondary cerebral insults that evolve over time and are known to aggravate outcome. This strategy is based on a variety of monitoring techniques including use of intraparenchymal monitors. This article reviews parenchymal brain oxygen monitors, including the available technologies, practical aspects of use, the physiologic rationale behind their use, and patient management based on brain oxygen.

Blue sticky traps are more efficient for the monitoring of Lygus rugulipennis (Heteroptera, Miridae) than yellow sticky traps

Selostus: Siniset liimapyydykset ovat keltaisia liimapyydyksiä tehokkaampia peltoluteen tarkkailussa

Prescription du monitoring pratique médicate: de l'empirisme eclairé aux stratégies rationnelles [Prescribing monitoring in clinical practice: from enlightened empiricism to rational strategies].

Monitoring of a medical condition is the periodic measurement of one or several physiological or biological variables to detect a signal regarding its clinical progression or its response to treatment. We distinguish different medical situations between diagnostic, clinical and therapeutic process to apply monitoring. Many clinical, variables can be used for monitoring, once their intrinsic properties (normal range, critical difference, kinetics, reactivity) and external validity (pathophysiological importance, predictive power for clinical outcomes) are established. A formal conceptualization of monitoring is being developed and should support the rational development of monitoring strategies and their validation through appropriate clinical trials.

Rapid Biodiversity Assessment and Monitoring Method for Highly Diverse Benthic Communities: A Case Study of Mediterranean Coralligenous Outcrops

Increasing anthropogenic pressures urge enhanced knowledge and understanding of the current state of marine biodiversity. This baseline information is pivotal to explore present trends, detect future modifications and propose adequate management actions for marine ecosystems. Coralligenous outcrops are a highly diverse and structurally complex deep-water habitat faced with major threats in the Mediterranean Sea. Despite its ecological, aesthetic and economic value, coralligenous biodiversity patterns are still poorly understood. There is currently no single sampling method that has been demonstrated to be sufficiently representative to ensure adequate community assessment and monitoring in this habitat. Therefore, we propose a rapid non-destructive protocol for biodiversity assessment and monitoring of coralligenous outcrops providing good estimates of its structure and species composition, based on photographic sampling and the determination of presence/absence of macrobenthic species. We used an extensive photographic survey, covering several spatial scales (100s of m to 100s of km) within the NW Mediterranean and including 2 different coralligenous assemblages: Paramuricea clavata (PCA) and Corallium rubrum assemblage (CRA). This approach allowed us to determine the minimal sampling area for each assemblage (5000 cm² for PCA and 2500 cm²for CRA). In addition, we conclude that 3 replicates provide an optimal sampling effort in order to maximize the species number and to assess the main biodiversity patterns of studied assemblages in variability studies requiring replicates. We contend that the proposed sampling approach provides a valuable tool for management and conservation planning, monitoring and research programs focused on coralligenous outcrops, potentially also applicable in other benthic ecosystems

Improvement of therapeutic drug monitoring of imatinib by Bayesian prediction of trough levels. Personalized drug dosage

Aims: Plasma concentrations of imatinib differ largely between patients despite same dosage, owing to large inter-individual variability in pharmacokinetic (PK) parameters. As the drug concentration at the end of the dosage interval (Cmin) correlates with treatment response and tolerability, monitoring of Cmin is suggested for therapeutic drug monitoring (TDM) of imatinib. Due to logistic difficulties, random sampling during the dosage interval is however often performed in clinical practice, thus rendering the respective results not informative regarding Cmin values.Objectives: (I) To extrapolate randomly measured imatinib concentrations to more informative Cmin using classical Bayesian forecasting. (II) To extend the classical Bayesian method to account for correlation between PK parameters. (III) To evaluate the predictive performance of both methods.Methods: 31 paired blood samples (random and trough levels) were obtained from 19 cancer patients under imatinib. Two Bayesian maximum a posteriori (MAP) methods were implemented: (A) a classical method ignoring correlation between PK parameters, and (B) an extended one accounting for correlation. Both methods were applied to estimate individual PK parameters, conditional on random observations and covariate-adjusted priors from a population PK model. The PK parameter estimates were used to calculate trough levels. Relative prediction errors (PE) were analyzed to evaluate accuracy (one-sample t-test) and to compare precision between the methods (F-test to compare variances).Results: Both Bayesian MAP methods allowed non-biased predictions of individual Cmin compared to observations: (A) - 7% mean PE (CI95% - 18 to 4 %, p = 0.15) and (B) - 4% mean PE (CI95% - 18 to 10 %, p = 0.69). Relative standard deviations of actual observations from predictions were 22% (A) and 30% (B), i.e. comparable to the intraindividual variability reported. Precision was not improved by taking into account correlation between PK parameters (p = 0.22).Conclusion: Clinical interpretation of randomly measured imatinib concentrations can be assisted by Bayesian extrapolation to maximum likelihood Cmin. Classical Bayesian estimation can be applied for TDM without the need to include correlation between PK parameters. Both methods could be adapted in the future to evaluate other individual pharmacokinetic measures correlated to clinical outcomes, such as area under the curve(AUC).

Continuous electroencephalographic monitoring in critically ill patients with central nervous system infections.

OBJECTIVES: To determine the prevalence, predictors, and clinical significance of electrographic seizures (ESz) and other continuous electroencephalographic monitoring findings in critically ill patients with central nervous system infections. DESIGN: Retrospective cohort study. SETTING: Eighteen-bed neurocritical care unit. PATIENTS: We identified 42 consecutive patients with primary central nervous system infection (viral, 27 patients [64%]; bacterial, 8 patients [18%]; and fungal or parasitic, 7 patients [17%]) who underwent continuous electroencephalographic monitoring between January 1, 1996, and February 28, 2007. MAIN OUTCOME MEASURES: Presence of ESz or periodic epileptiform discharges (PEDs). RESULTS: Electrographic seizures were recorded in 14 patients (33%), and PEDs were recorded in 17 patients (40%). Twenty patients (48%) had either PEDs or ESz. Of the 14 patients with ESz, only 5 (36%) had a clinical correlate. Periodic epileptiform discharges (odds ratio=13.4; P=.001) and viral cause (odds ratio=13.0; P=.02) were independently associated with ESz. Both ESz (odds ratio=5.9; P=.02) and PEDs (odds ratio=6.1; P=.01) were independently associated with poor outcome at discharge (severe disability, vegetative state, or death). CONCLUSIONS: In patients with central nervous system infections undergoing continuous electroencephalographic monitoring, ESz and/or PEDs were frequent, occurring in 48% of our cohort. More than half of the ESz had no clinical correlate. Both ESz and PEDs were independently associated with poor outcome. Additional studies are needed to determine whether prevention or treatment of these electrographic findings improves outcome.

Real-time monitoring of the silicidation process of tungsten filaments at high temperature used as catalysers for silane decomposition

The scope of this work is the systematic study of the silicidation process affecting tungsten filaments at high temperature (1900ºC) used for silane decomposition in the hot-wire chemical vapour deposition technique (HWCVD). The correlation between the electrical resistance evolution of the filaments, Rfil(t), and the different stages of the their silicidation process is exposed. Said stages correspond to: the rapid formation of two WSi2 fronts at the cold ends of the filaments and their further propagation towards the middle of the filaments; and, regarding the hot central portion of the filaments: a initial stage of silicon dissolution into the tungsten bulk, with a random duration for as-manufactured filaments, followed by the inhomogeneous nucleation of W5Si3 (which is later replaced by WSi2) and its further growth towards the filaments core. An electrical model is used to obtain real-time information about the current status of the filaments silicidation process by simply monitoring their Rfil(t) evolution during the HWCVD process. It is shown that implementing an annealing pre-treatment to the filaments leads to a clearly repetitive trend in the monitored Rfil(t) signatures. The influence of hydrogen dilution of silane on the filaments silicidation process is also discussed.