Ultrasound biomicroscopy in deep sclerectomy

Purpose: To evaluate by ultrasound biomicroscopy (UBM) the anatomical characteristics and the intraocular pressure (IOP) lowering mechanisms of deep sclerectomy after long-term follow-up. Methods: In all, 22 eyes of 21 consecutive patients who had deep sclerectomy were examined by UBM. Several UBM variables were prospectively evaluated, including the presence and maximum length and height of the intrascleral space, the minimum thickness of residual trabeculo-Descemet membrane (TDM), the presence and type of subconjunctival filtering bleb, and the presence of other possible drainage sites, for example suprachoroidal. Surgical success was considered to be achieved when the IOP was

Dialogic Instruments: Virtuosity (Re)Located in Improvised Performance

This paper introduces a series of new musical instruments that have been designed to
address questions relating to performative virtuosity in the area of ensemble-based
improvisation. The intentionally exploited inconsistent nature of these instruments
raises questions around traditional notions of instrument mastery and opens up
possible methods of recon?guring the performer-instrument relationship.

Atomistic investigation on the structure-property relationship during thermal spray nanoparticle impact

During thermal spraying, hot particles impact on a colder substrate. This interaction of crystalline copper nanoparticles and copper substrate is modelled, using MD simulation. The quantitative results of the impacts at different velocities and temperatures are evaluated using a newly defined flattening aspect ratio. This ratio between the maximum diameter after the impact and the height of the splat increases with increasing Reynolds numbers until a critical value is reached. At higher Reynolds numbers the flattening aspect ratio decreases again, as the kinetic energy of the particle leads to increasing substrate temperature and, therefore, decreases the substrate resistance. Thus, the particle penetrates into the substrate and deforms less.

Mafic Plinian volcanism and ignimbrite emplacement at Tofua volcano, Tonga

Tofua Island is the largest emergent mafic volcano within the Tofua arc, Tonga, southwest Pacific. The volcano is dominated by a distinctive caldera averaging 4 km in diameter, containing a freshwater lake in the south and east. The latest paroxysmal (VEI 5-6) explosive volcanism includes two phases of activity, each emplacing a high-grade ignimbrite. The products are basaltic andesites with between 52 wt.% and 57 wt.% SiO(2). The first and largest eruption caused the inward collapse of a stratovolcano and produced the 'Tofua' ignimbrite and a sub-circular caldera located slightly northwest of the island's centre. This ignimbrite was deposited in a radial fashion over the entire island, with associated Plinian fall deposits up to 0.5 m thick on islands > 40 km away. Common sub-rounded and frequently cauliform scoria bombs throughout the ignimbrite attest to a small degree of marginal magma-water interaction. The common intense welding of the coarse-grained eruptive products, however, suggests that the majority of the erupted magma was hot, water-undersaturated and supplied at high rates with moderately low fragmentation efficiency and low levels of interaction with external water. We propose that the development of a water-saturated dacite body at shallow (<6 km) depth resulted in failure of the chamber roof to cause sudden evacuation of material, producing a Plinian eruption column. Following a brief period of quiescence, largescale faulting in the southeast of the island produced a second explosive phase believed to result from recharge of a chemically distinct magma depleted in incompatible elements. This similar, but smaller eruption, emplaced the 'Hokula' Ignimbrite sheet in the northeast of the island. A maximum total volume of 8 km(3) of juvenile material was erupted by these events. The main eruption column is estimated to have reached a height of similar to 12 km, and to have produced a major atmospheric injection of gas, and tephra recorded in the widespread series of fall deposits found on coral islands 40-80 km to the east (in the direction of regional upper-tropospheric winds). Radiocarbon dating of charcoal below the Tofua ignimbrite and organic material below the related fall units imply this eruption sequence occurred post 1,000 years BP. We estimate an eruption magnitude of 2.24x10(13) kg, sulphur release of 12 Tg and tentatively assign this eruption to the AD 1030 volcanic sulphate spike recorded in Antarctic ice sheet records.

Tracking magnetic bright point motions through the solar atmosphere

High-cadence, multiwavelength observations and simulations are employed for the analysis of solar photospheric magnetic bright points (MBPs) in the quiet Sun. The observations were obtained with the Rapid Oscillations in the Solar Atmosphere (ROSA) imager and the Interferometric Bidimensional Spectrometer at the Dunn Solar Telescope. Our analysis reveals that photospheric MBPs have an average transverse velocity of approximately 1 km s-1, whereas their chromospheric counterparts have a slightly higher average velocity of 1.4 km s-1. Additionally, chromospheric MBPs were found to be around 63 per cent larger than the equivalent photospheric MBPs. These velocity values were compared with the output of numerical simulations generated using the muram code. The simulated results were similar, but slightly elevated, when compared to the observed data. An average velocity of 1.3 km s-1 was found in the simulated G-band images and an average of 1.8 km s-1 seen in the velocity domain at a height of 500 km above the continuum formation layer. Delays in the change of velocities were also analysed. Average delays of ˜4 s between layers of the simulated data set were established and values of ˜29 s observed between G-band and Ca ii K ROSA observations. The delays in the simulations are likely to be the result of oblique granular shock waves, whereas those found in the observations are possibly the result of a semi-rigid flux tube.

Individual Characteristics Associated with Mismatches between Self-Reported and Accelerometer-Measured Physical Activity

Background: Accurate assessment tools are required for the surveillance of physical activity (PA) levels and the assessment of the effect of interventions. In addition, increasing awareness of PA is often used as the first step in pragmatic behavioural interventions, as discrepancies between the amount of activity an individual perceives they do and the amount actually undertaken may act as a barrier to change. Previous research has demonstrated differences in the amount of activity individuals report doing, compared to their level of physical activity when measured with an accelerometer. Understanding the characteristics of those whose PA level is ranked differently when measured with either self-report or accelerometry is important as it may inform the choice of instrument for future research. The aim of this project was to determine which individual characteristics are associated with differences between self-reported and accelerometer measured physical activity.

Methods: Participant data from the 2009 wave of the Commuting and Health in Cambridge study were used. Quartiles of self-reported and accelerometer measured PA were derived by ranking each measure from lowest to highest. These quartiles were compared to determine whether individuals’ physical activity was ranked higher by either method. Multinomial logistic regression models were used to investigate the individual characteristics associated with different categories of mismatch.

Results: Data from 486 participants (70% female) were included in the analysis. In adjusted analyses, the physical activity of overweight or obese individuals was significantly more likely to be ranked higher by self-report than by accelerometer than that of normal-weight individuals (OR = 2.07, 95%CI = 1.28–3.34), particularly among women (OR = 3.97, 95%CI = 2.11–7.47).

Conclusions: There was a greater likelihood of mismatch between self-reported and accelerometer measured physical activity levels in overweight or obese adults. Future studies in overweight or obese adults should consider employing both methods of measurement.

Hydrogel-Forming Microneedle Arrays Can Be Effectively Inserted in Skin by Self-Application: A Pilot Study Centred on Pharmacist Intervention and a Patient Information Leaflet

Purpose: To investigate, for the first time, the influence of pharmacist intervention and the use of a patient information leaflet on self-application of hydrogel-forming microneedle arrays by human volunteers without the aid of an applicator device.
Methods: A patient information leaflet was drafted and pharmacist counselling strategy devised. Twenty human volunteers applied 11 × 11 arrays of 400 μm hydrogel-forming microneedle arrays to their own skin following the instructions provided. Skin barrier function disruption was assessed using transepidermal water loss measurements and optical coherence tomography and results compared to those obtained when more experienced researchers applied the microneedles to the volunteers or themselves.
Results: Volunteer self-application of the 400 μm microneedle design resulted in an approximately 30% increase in skin transepidermal water loss, which was not significantly different from that seen with self-application by the more experienced researchers or application to the volunteers. Use of optical coherence tomography showed that self-application of microneedles of the same density (400 μm, 600 μm and 900 μm) led to percentage penetration depths of approximately 75%, 70% and 60%, respectively, though the diameter of the micropores created remained quite constant at approximately 200 μm. Transepidermal water loss progressively increased with increasing height of the applied microneedles and this data, like that for penetration depth, was consistent, regardless of applicant.
Conclusion: We have shown that hydrogel-forming microneedle arrays can be successfully and reproducibly applied by human volunteers given appropriate instruction. If these outcomes were able to be extrapolated to the general patient population, then use of bespoke MN applicator devices may not be necessary, thus possibly enhancing patient compliance.

Government decisions before and during the First World War and the living standards in Germany during a drastic natural experiment

The First World War hit Germany severely, particularly the agricultural sector, because the outbreak came unexpected and its duration exceeded all expectations. Many resources necessary for agricultural production were required by the war economy and led to shortages and shrinking supplies. Many agricultural laborers were drafted and the blockade imposed by the allies prevented Germany from a great deal of imports. As a consequence, the nutritional situation was devastating, particularly after 1916, and hit all groups of the German society. The period under observation provides one of most drastic natural experiments in the 20th century. This study uses anthropometric data from German soldiers who served in the Second World War to trace living standards between the 1900s and the 1920s. In contrast to other approaches, this paper is able to distinguish between social groups by occupation, religious denominatio\n, regional origin, and city size. The results suggest that although all social strata were hit by famine conditions, the height of farmers, urban citizens, Catholics, and especially individuals born in the highly integrated food-import regions along the coast and the banks of the Rhine declined most.

Experimental study on PC hollow-core slab strengthened with bamboo plates

An experimental study on strengthening prestressed concrete (PC) hollow-core slabs was conducted. Nine PC hollow-core slabs were tested, including three unstrengthened reference slabs and six slabs strengthened with bamboo plates. The results show that compared with unreinforced slabs, the cracking loads of PC hollow-core slabs strengthened with bamboo plates increase by 5% to 96% (with an average of 41%), the loads at allowable deflection increase by 8% to 76% (with an average of 35%), and the ultimate loads increase by 83% to 184% (with an average of 123%), respectively. All the degrees of improvement in the crack load, allowable load and ultimate load increase with the increase in the thickness and width of the bamboo plates. With the increase in the loads, the strain distribution along the height of the strengthened slabs at the mid-span basically remains a plan-assumption. With the increase in the thickness and width of the bamboo plates, both the bamboo tensile strain on the tensile face and the concrete compressive strain on the compression face of the strengthened slabs decrease under the same load level.

Do grafema ao gesto : contributos linguísticos para um sistema de síntese de base articulatória

Motivados pelo propósito central de contribuir para a construção, a longo prazo, de um sistema completo de conversão de texto para fala, baseado em síntese articulatória, desenvolvemos um modelo linguístico para o português europeu (PE), com base no sistema TADA (TAsk Dynamic Application), que visou a obtenção automática da trajectória dos articuladores a partir do texto de entrada. A concretização deste objectivo ditou o desenvolvimento de um conjunto de tarefas, nomeadamente 1) a implementação e avaliação de dois sistemas de silabificação automática e de transcrição fonética, tendo em vista a transformação do texto de entrada num formato adequado ao TADA; 2) a criação de um dicionário gestual para os sons do PE, de modo a que cada fone obtido à saída do conversor grafema-fone pudesse ter correspondência com um conjunto de gestos articulatórios adaptados para o PE; 3) a análise do fenómeno da nasalidade à luz dos princípios dinâmicos da Fonologia Articulatória (FA), com base num estudo articulatório e perceptivo. Os dois algoritmos de silabificação automática implementados e testados fizeram apelo a conhecimentos de natureza fonológica sobre a estrutura da sílaba, sendo o primeiro baseado em transdutores de estados finitos e o segundo uma implementação fiel das propostas de Mateus & d'Andrade (2000). O desempenho destes algoritmos – sobretudo do segundo – mostrou-se similar ao de outros sistemas com as mesmas potencialidades. Quanto à conversão grafema-fone, seguimos uma metodologia baseada em regras de reescrita combinada com uma técnica de aprendizagem automática. Os resultados da avaliação deste sistema motivaram a exploração posterior de outros métodos automáticos, procurando também avaliar o impacto da integração de informação silábica nos sistemas. A descrição dinâmica dos sons do PE, ancorada nos princípios teóricos e metodológicos da FA, baseou-se essencialmente na análise de dados de ressonância magnética, a partir dos quais foram realizadas todas as medições, com vista à obtenção de parâmetros articulatórios quantitativos. Foi tentada uma primeira validação das várias configurações gestuais propostas, através de um pequeno teste perceptual, que permitiu identificar os principais problemas subjacentes à proposta gestual. Este trabalho propiciou, pela primeira vez para o PE, o desenvolvimento de um primeiro sistema de conversão de texto para fala, de base articulatória. A descrição dinâmica das vogais nasais contou, quer com os dados de ressonância magnética, para caracterização dos gestos orais, quer com os dados obtidos através de articulografia electromagnética (EMA), para estudo da dinâmica do velo e da sua relação com os restantes articuladores. Para além disso, foi efectuado um teste perceptivo, usando o TADA e o SAPWindows, para avaliar a sensibilidade dos ouvintes portugueses às variações na altura do velo e alterações na coordenação intergestual. Este estudo serviu de base a uma interpretação abstracta (em termos gestuais) das vogais nasais do PE e permitiu também esclarecer aspectos cruciais relacionados com a sua produção e percepção.

A importância da prática de orquestra no ensino especializado da música : implicações no âmbito da motivação para a aprendizagem instrumental

A ideia inicial para esta investigação era estudar o efeito da prática de orquestra na motivação intrínseca dos alunos, nomeadamente as repercussões no estudo individual do instrumento. Foram realizados dois estudos no contexto da investigação: um primeiro estudo de natureza exploratória, no qual foram entrevistados 15 professores e 15 alunos; um segundo estudo, de natureza descritiva e explanatória, no qual se administraram 274 questionários a alunos de 9 classes de orquestra em 4 escolas do ensino especializado da música, assistiu-se a um ensaio de cada uma das orquestras e realizou-se uma entrevista informal ao professor de cada classe de orquestra. Os resultados obtidos indicam que a prática orquestral pode produzir efeitos na motivação dos alunos, com implicações claras no estudo do instrumento. Também foi possível concluir que a participação dos alunos em orquestra poderá ser um fator capaz de motivar os alunos, e capaz de transformar para melhor a perspetiva dos alunos em relação à aprendizagem musical. Este facto sugere que a prática de orquestra deve ser entendida como um pilar fundamental da dinâmica das escolas do ensino especializado da música, e como uma disciplina nuclear do curriculum deste ensino.

Fate Hazardous elements in soils surrounding a coal-fired power plant complex

Proceedings of the 13th International UFZ-Deltares Conference on Sustainable Use and Management of Soil, Sediment and Water Resources - 9–12 June 2015 • Copenhagen, Denmark

Estudo sobre viabilidade de produção descentralizada de energia à custa do efeito chaminé

A procura por alternativas ao atual paradigma energético, que se caracteriza por uma predominância indiscutível das fontes combustíveis fósseis, é o motivo primário desta investigação. A energia emitida pelo Sol que chega à Terra diariamente ultrapassa em várias ordens de grandeza a energia que a nossa sociedade atual necessita. O efeito chaminé é uma das formas de aproveitar essa energia. Este efeito tem origem no diferencial de temperaturas existente entre o interior e o exterior de uma chaminé, que provoca um gradiente nas massas volúmicas do fluido entre o interior e o exterior da chaminé, induzindo assim um fluxo de ar. Esta diferença de temperaturas radica na exposição da face exterior da chaminé à radiação solar. No sistema que nos propomos estudar, o ar entra na chaminé por pequenos orifícios situados na sua base, e, ao tomar contacto com as paredes internas da chaminé, aquece desde a temperatura ambiente, Ta, até à temperatura interna, Ti . Este aumento de temperatura torna o ar dentro da chaminé mais “leve” em comparação com o ar mais frio do exterior levando-o a ascender ao longo do interior da chaminé. Este escoamento contém energia cinética que pode, por exemplo, ser transformada em energia elétrica por intermédio de turbinas. A eficiência de conversão da energia será tanto maior quanto menor for a velocidade do ar a jusante da turbina. Esta tecnologia poderá ser instalada de forma descentralizada, como acontece com as atuais centrais concentradoras solares térmicas e fotovoltaicas localizadas na periferia de grandes cidades ou, alternativamente, poderá ser inserida no próprio tecido urbanístico. A investigação demonstra que as dimensões da chaminé, a irradiação e a temperatura do ar são os fatores com maior impacto na potência hidráulica gerada.

Prevalência do excesso de peso em idade pré-escolar no concelho da Murtosa: um estudo transversal

RESUMO - A prevalência de obesidade infantil em Portugal é das mais elevadas da Europa. No concelho da Murtosa (Aveiro), para estimar a prevalência de excesso de peso e obesidade entre os 3 e os 6 anos e determinar os factores que lhe estão associados, desenvolveu-se, durante o ano de 2008, um estudo transversal que consistiu na avaliação estatoponderal das crianças frequentadoras dos estabelecimentos de ensino pré-escolar do concelho e aplicação de um questionário aos pais sobre antecedentes e perinatais, hábitos alimentares, actividades da criança e características da família. Através de um modelo de regressão logística multivariada identificaram-se as variáveis associadas ao excesso de peso/obesidade. Participaram no estudo 258 crianças, estimando-se uma prevalência de excesso de peso de 15,5 % (IC 95 % : 11,6 % a 20,4 %) e de obesidade de 6,2 % (IC 95 % : 3,9 % a 9,8 % ). Observou-se uma maior prevalência de excesso de peso nos meninos (19,5 %) e de obesidade nas meninas (10,4 %). O excesso de peso materno e o hábito de comer a ver televisão aumentaram o risco de excesso de peso/obesidade (OR: 10,548; OR: 13,815); o maior número de horas de sono diário, o maior número de refeições diárias e o aumento ponderal materno durante a gravidez (OR: 0,490; OR: 0,366; OR: 0,804) associaram-se a um menor risco de excesso de peso/obesidade. Justifica-se o desenvolvimento de programas de prevenção primária e secundária da obesidade infantil dirigidos aos factores de risco modificáveis identificados, sugerindo-se a necessidade de uma abordagem familiar e da avaliação sistemática deste tipo de intervenções.

Caracterización de redes de cerco artesanal para anchoveta destinada al consumo humano directo

Las características principales de las redes de cerco artesanales anchoveteras para CHD (PS 01.1.0 “ISSCFG”), utilizan tamaños de malla en el copo y cuerpo de ½” ~ 13 mm de material nylon Poliamida (PA). Se encontró una diferencia en las dimensiones, el material y diámetro del hilo del paño usado, entre las redes de las ANC-CHD tradicionales (Paita, Chimbote, Callao e Ilo) que utilizan paños anchoveteros de R310tex, R381tex R462tex, con longitud de relinga superior (LRS) de 183-366 m (100 a 200 bz), altura de paño estirado (AHE) de 27 a 64 m (15 a 35 bz); y las redes de cerco ANC-Pisco que utilizan paños anchoveteros de R155tex y R230tex, con LRS de 270 a 396 m (145 a 215 bz) y AHE de 30 m (16 bz). Del análisis regresional experimental, las principales características de la red (LRS, AHE), y la embarcación–capacidad de bodega-(CBOD) presentaron correlaciones significativas para la flota ANC-Tradicional (r = 0,86 y 0,91), mientras que en la flota ANC-Pisco las correlación de la función CBODLRS fue de 0,30 y la AHE fue constante (30 m) para todo el rango de LRS (270 - 396 m).