Expedient, accurate methods for the determination of the degree of substitution of cellulose carboxylic esters: Application of UV-vis spectroscopy (dye solvatochromism) and FTIR

Two techniques, namely UV-vis- and FTIR spectroscopy, have been employed in order to calculate the degree of substitution (DS) of cellulose carboxylic esters, including acetates, CAs, butyrates, CBs, and hexanoates, CHs. Regarding UV-vis spectroscopy, we have employed a novel approach, based on measuring the dependence of lambda(max) of the intra-molecular charge-transfer bands of polarity probes adsorbed on DS of the ester films (solvatochromism). Additionally, we have revisited the use of FTIR for DS determination. Several methods have been used in order to plot Beer`s law graph, namely: Absorption of KBr pellets, pre-coated with CA: reflectance (DRIFTS) of CAs-KBr solid-solid mixtures with, or without the use of 1.4-dicyanobenzene as an internal reference; reflectance of KBr powder pre-coated with CA. The methods indicated are simple, fast, and accurate, requiring much less ester than the titration method. The probe method is independent of the experimental variables examined. (c) 2010 Published by Elsevier Ltd.

Evaluation of the antioxidant activity of passion fruit (Passiflora edulis and Passiflora alata) extracts on stimulated neutrophils and myeloperoxidase activity assays

The antioxidant activity of methanol extracts from Passiflora edulis and Passiflora alata pulp, and P. edulis rinds, healthy or infected with the passion fruit woodiness virus (PWV), was investigated using the oxidant activities of the neutrophil and the neutrophil granule enzyme myeloperoxidase (MPO), both playing key roles in inflammation. The reactive oxygen species produced by stimulated neutrophils were evaluated by lucigenin-enhanced chemiluminescence (CL) and the activity of purified MPO was measured by SIEFED (Specific Immunological Extraction Followed by Enzymatic Detection), a technique for studying the direct interaction of a compound with the enzyme. The rind extracts of P. edulis possessed higher and dose-dependent inhibitory effects on CL response and on the peroxidase activity of MPO than total pulp extracts from both passion fruit species. The quantification of isoorientin in the extracts showed a correlation with their antioxidant activity, suggesting the potential of P. edulis rinds as functional food or as a possible source of natural flavonoids. (C) 2011 Elsevier Ltd. All rights reserved.

Comparison of the analytical performance of electrophoresis microchannels fabricated in PDMS, glass, and polyester-toner

This paper compares the analytical performance of microchannels fabricated in PDMS, glass, and polyester-toner for electrophoretic separations. Glass and PDMS chips were fabricated using well-established photolithographic and replica-molding procedures, respectively. PDMS channels were sealed against three different types of materials: native PDMS, plasma-oxidized PDMS, and glass. Polyester-toner chips were micromachined by a direct-printing process using an office laser printer. All microchannels were fabricated with similar dimensions according to the limitations of the direct-printing process (width/depth 150 mu m/12 mu m). LIF was employed for detection to rule out any losses in separation efficiency due to the detector configuration. Two fluorescent dyes, coumarin and fluorescein, were used as model analytes. Devices were evaluated for the following parameters related to electrophoretic separations: EOF, heat dissipation, injection reproducibility, separation efficiency, and adsorption to channel wall.

Evaluation of the QuEChERS Method and Gas Chromatography-Mass Spectrometry for the Analysis Pesticide Residues in Water and Sediment

A method for the determination of pesticide residues in water and sediment was developed using the QuEChERS method followed by gas chromatography - mass spectrometry. The method was validated in terms of accuracy, specificity, linearity, detection and quantification limits. The recovery percentages obtained for the pesticides in water at different concentrations ranged from 63 to 116%, with relative standard deviations below 12%. The corresponding results from the sediment ranged from 48 to 115% with relative standard deviations below 16%. The limits of detection for the pesticides in water and sediment were below 0.003 mg L(-1) and 0.02 mg kg(-1), respectively.

NAVET's Boxes - an Evaluation of the Post-Visit Loan Service at a Science Centre in Borås

Many pedagogues believe science centres to be a good complement to the more formal school teaching. For a visit to a science centre to be as educational as possible, there is a need for pre-visit information of some sort, a guided visit, and post-visit work. Many science centres offer loan services of different kinds. At Navet, a science centre in Borås, teachers can borrow boxes with experiments connected to the different themes they provide. The experiments are supposed to be a continuation of the visit and help settle the knowledge gained during the visit. This thesis is an evaluation of how the boxes function in the schools, and what the teachers think of them. The study was conducted through questionnaires and interviews with both teachers and the staff at Navet. The results of the study are very positive. Many teachers have been involved with Navet from the very beginning and they see a visit to Navet as an integrated part of their teaching. Some boxes work better than others and some might need clearer information, but overall the teachers see the boxes as timesavers, as a way to vary their teaching more easily, and as a help for teachers not specialized in mathematics and science.

Universal Experimental Measurement System «Sun-Walker» : Automotive measurement system for the evaluation of the solar irradiation distribution for the tests of the solar concentrated systems.

This Thesis project is a part of the research conducted in Solar industry. ABSOLICON Solar Concentrator AB has invented and started production of the prospective solar concentrated system Absolicon X10. The aims of this Thesis project are designing, assembling, calibrating and putting in operation the automatic measurement system intended to evaluate distribution of density of solar radiation in the focal line of the concentrated parabolic reflectors and to measure radiation from the artificial source of light being a calibration-testing tool.On the basis of the requirements of the company’s administration and needs of designing the concentrated reflectors the operation conditions for the Sun-Walker were formulated. As the first step, the complex design of the whole system was made and division on the parts was specified. After the preliminary conducted simulation of the functions and operation conditions of the all parts were formulated.As the next steps, the detailed design of all the parts was made. Most components were ordered from respective companies. Some of the mechanical components were made in the workshop of the company. All parts of the Sun-Walker were assembled and tested. The software part, which controls the Sun-Walker work and conducts measurements of solar irradiation, was created on the LabVIEW basis. To tune and test the software part, the special simulator was designed and assembled.When all parts were assembled in the complete system, the Sun-Walker was tested, calibrated and tuned.

Energy Efficiency through Thermal Energy Storage - Evaluation of the Possibilities for the Swedish Building Stock, Phase 1

As a first step in assessing the potential of thermal energy storage in Swedish buildings, the current situation of the Swedish building stock and different storage methods are discussed in this paper. Overall, many buildings are from the 1960’s or earlier having a relatively high energy demand, creating opportunities for large energy savings. The major means of heating are electricity for detached houses and district heating for multi dwelling houses and premises. Cooling needs are relatively low but steadily increasing, emphasizing the need to consider energy storage for both heat and cold. The thermal mass of a building is important for passive storage of thermal energy but this has not been considered much when constructing buildings in Sweden. Instead, common ways of storing thermal energy in Swedish buildings today is in water storage tanks or in the ground using boreholes, while latent thermal energy storage is still very uncommon.

Dynamic whole system testing of combined renewable heating systems : the current state of the art

Objective: For the evaluation of the energetic performance of combined renewable heating systems that supply space heat and domestic hot water for single family houses, dynamic behaviour, component interactions, and control of the system play a crucial role and should be included in test methods. Methods: New dynamic whole system test methods were developed based on “hardware in the loop” concepts. Three similar approaches are described and their differences are discussed. The methods were applied for testing solar thermal systems in combination with fossil fuel boilers (heating oil and natural gas), biomass boilers, and/or heat pumps. Results: All three methods were able to show the performance of combined heating systems under transient operating conditions. The methods often detected unexpected behaviour of the tested system that cannot be detected based on steady state performance tests that are usually applied to single components. Conclusion: Further work will be needed to harmonize the different test methods in order to reach comparable results between the different laboratories. Practice implications: A harmonized approach for whole system tests may lead to new test standards and improve the accuracy of performance prediction as well as reduce the need for field tests.

EVALUATION OF THE CONSERVATION LANDS OF MAINE BASED ON PRESENCE OF HABITAT SUITABLE FOR LISTED SPECIES

http://digitalcommons.colby.edu/atlasofmaine2009/1028/thumbnail.jpg

Evaluation of the Conservation Lands of Maine Based on Presence of Habitat Suitable for Listed Species

“Conservation Lands” include both public and private lands that are devoted to the protection of wildlife and natural resources. “Listed Species” include federally and state endangered and threatened animals that are in danger of extermination in the state of Maine. The purpose of this study is to determine how well conservation lands are protecting the habitats of listed species. GAP data was used for 13 terrestrial vertebrate species indicating the presence or absence of suitable habitats. This data was compiled in GIS, generating a layer showing the number of listed species an area is suitable for. The areas that were suitable for at least one habitat were compared to answer three questions: (1) Is there is a difference between the presence and absence of listed species on protected lands and lands that are not protected? (2) Is there is a difference between the presence and absence of listed species on public lands managed by the state and the federal government and private land? (3) Is there is a difference between the presence and absence of listed species on lands protected under easements and lands that are protected fee simple? We found significant differences between all three categories. Conservation lands, private lands, and lands held under easement protect the habitat of listed species most effectively. We believe that this is due to the large number of private land trusts in the state of Maine and the effective management strategies of state lands.

Debt management in Brazil: evaluation of the Real Plan and challenges ahead

The Brazilian domestic debt has posed two challenges to policy-makers: it has grown very fast and its maturity is extremely short. This has prompted fears that a default or a compulsory lengthening scheme would be imposed. Here, we analyse the domestic public debt management experience in Brazil, searching for policy prescriptions for the next few years. After briefiy reviewing the recent domestic public debt history, we decompose the large rise in federal bonded debt during 1995-2000, searching for its macroeconomic causes. The main culprits are the extremely high interest payments-which, unti11998, were caused by the weak fiscal stance and the quasi-fixed exchange-rate regime; and since 1999, by the impact ofthe currency depreciation On the dollar-indexed and the externai debt-, and the accumulation of assets of doubtful value, much of which may have to be written off in the future. Simulation exercises of the net debt path for the near future underscore the importance of a tighter fiscal stance to prevent the debt-GDP ratio from growing further. Given the need to quickly lengthen the debt maturity, our main policy advice is to foster, and rely more on, infiation-linked bonds.

Delivering educational value: evaluation of The Corporate International Master's Program by its stakeholders

Over the past decade, the number and diversity of executive education (EE) programs have continued to grow (BusinessWeek, 2006). With the proliferation of EE programs come the challenges of evaluating the overall quality of such programs. What makes a valuable EE program to the companies that purchase them, to the universities that manage them, and to the participants that learn from them? The present research focuses on key factors that have served to determine the value of EE programs, and apply these criteria to evaluate the quality of a new EE program: The Corporate International Master’s (CIM) program. The CIM program was launched in the fall of 2013. Hence, the present research will focus on evaluating the CIM program in its first year of operations. It is my hope that this research will inform the optimization and future development of the CIM program.

An evaluation of the Business Model Canvas by technology-oriented startups in Brazil : a qualitative study about the usage of the tool by Brazilian entrepreneurs

The following paper was conducted with the support of several entrepreneurs and startups from Brazil. The aim of the research was to find out which impact the Business Model Canvas, further abbreviated as BMC, has on technology-oriented startups in Brazil. The first step of the study was identify some general concepts of entrepreneurship, as well as the conditions and environment of the country. Afterwards, it was focused on defining and comparing different business model tools and concepts to the BMC. After the literature review and meeting with several professionals in the area of entrepreneurship and startups, a questionnaire was formulated in order to conduct the qualitative study and identify the main impact of the tool. The questionnaire was answered by ten startups. In order to check the validity and credibility of the research outcomes, theory and investigator triangulation was used. As a result, the usage of the BMC could be evaluated by obtaining the outcomes and the theory, which showed that Brazilian tech startups are using Osterwalder’s model for the reason of idea creation and testing, validating and pivoting their business model. Interestingly, the research revealed that the entrepreneurs are using the tool often not in the traditional way of printing it, but rather applying it as a thinking approach. Besides, the entrepreneurs are focusing mostly on developing a strong Value Proposition, Customer Segment and sustainable Revenue Streams, while afterwards the remaining building blocks are built. Moreover, the research showed that the startups are using also other concepts, such as the Customer Development Process or Build-Measure-Learn Feedback Loop. These methodologies are often applied together with the BMC and helps to identify the most sustainable components of the business idea. Keywords: Business