855 resultados para environmental management system
Resumo:
The process of environmental impact assessment (EIA), in the extent of previous environmental studies, has as one of its functions to provide subsidies to the actions of environmental managment of enterprises. However, the proper estructuring of programs that allows to support this managment does not often occurs. This research sought as one of its objectives to evaluate in which extent the process of EIA can be a subsidie for the EMS, providing basic elements of this system. In addition, more specifically, the research had as one of its objetives the development of subsidies for the implantation of an Environmental Managment System (EMS), based on the model of ISO 14001 (2004), for a sewage treatment plant yet to be constructed in the city of President Venceslau / SP. In order to achieve theses objetives, a discussion was held based on the evaluation of environmental studies available in the library of Cetesb / SMA. Still, for the elaboration of subsidies for the EMS of the treatment plant, the research was focused on the structuring of environmental management program, based on the information contained in its Preliminary Environmental Report (PER). The research had as one of its products, the development of subsidies for the planning and control of the environmental aspects and impacts and for the environmental program of the enterprise, based on the use of environmental indicators. It was concluded, based on the results that, in general, the previous environmental studies analyzed showed little emphasis on the phase of development of structured environmental programs that offer guidelines to achieve the desired results for the environmental performance of the company.
Resumo:
Increasingly the business for large companies tend to sustainable actions. Such actions may have motivated social, environmental and economical too. Thus, the study of small actions or investments aimed at improving a product or a process may impact on financial return and even the exposure of a sustainable paper company, a fact that is increasingly wel l regarded in the market. This study presents proposals raised in the market and in the literature showing the cost of each investment, the payback over time and the benefits of each project to be implemented in a corporative building located in the city of São Paulo. It was analyzed the energy consumption, determining the amount of consumption of each device through measurement of some parameters such as voltage and operating current, and lifting nominal values supplied by the manufacturers. By understanding the conditions of each equipment and the processes involved, were raised possible energy improvements, focusing on the cooling system of the building, the tariff system and the installation of an energy management system
Resumo:
The implantation of environmental management systens (SGA) in companies is the first step to the company conquers the environmental certification and consequently the benefits of a sustainable production of products, services and activities can bring. However, in the way as they are proposals in bibliographies the implantation of the SGAs, does not identify the definition of the operational stages of implementation of the same ones, generating doubts on the real environmental and administrative performance that they can come to generate for the organization. In this direction, the present research brings a proposal of operational systematics for implantation of SGA in companies, detailing each stage of implantation, considering its particularitities. For in such a way, a revision of norm NBR ISO 14001:2004 was made, looking for to identify to the interpretation imperfections gifts in the normative system. Moreover, other methods of SGA implantation had been searched gifts in the bibliography, searching proposals that detailed the operational aspects of the implantation of the system. In the same way, the accomplishment of a period of training supervised in the first semester of 2007 made possible the practical experience of the functioning of a system of environmental management, beyond the contact with professionals of the area and the acquisition of documents that had helped in the development of the research. The result was the attainment of a detailed procedure more, defining the operational systematic of SGA implantation, beyond the generation of a flowchart, describing as to develop each stage. This detailing certainly will facilitate the implantation of a SGA in companies interested in improving its environmental performance.
Resumo:
Taking as starting the environmental, social and economic impact of construction and demolition waste in Brazilian cities were created legal mechanisms for management and administration, seeking to minimize the impacts to the maximum, since the irregular deposition can be characterized as environmental crime. CONAMA Resolution No. 307 of 2002 establishing the mandatory implementation of an Integrated Management System Construction Waste and Demolition, guiding the classification and designation of the waste generating agents, collection agents and transporters, and the areas of culling and disposal of waste. The technical partnership between the Ministry of Cities, the Environment Ministry and the Caixa Econômica Federal, coordinated by Pinto & Gonzales (2005) Management in the work and management of construction waste, proposed a guidance manual to guide the implementation of a System Integrated Management of Construction Waste in Municipalities. The municipality of Guanambi in the state of Bahia, in full economic rise, lacks a waste management of construction and demolition, since there has areas for the disposal of waste being proposed in this paper the diagnosis of waste generation in the municipality as part of the methodology proposed by the work of Pinto & Gonzales (2005).
Resumo:
The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.
Resumo:
Pós-graduação em Biociências - FCLAS
Resumo:
Pós-graduação em Geografia - FCT
Understanding the genesis of green supply chain management: lessons from leading Brazilian companies
Resumo:
This work discusses the internal structuring processes of leading companies when adopting green supply chain management (GSCM) practices. A multiple case study approach was adopted as the research methodology, with four large Brazilian companies that are leaders in their market segments. The introduction of green products is a key step towards initiating concern for the environment among suppliers and customers. This study's results show the importance of having green teams, a dedicated functional area, and/or green jobs that support the discussion of environmental management among a business and beyond. The practical results of this study offer new insights into the behavior of companies that are adopting GSCM practices, thereby generating new evidence for the extension of GSCM theory. (C) 2014 Elsevier Ltd. All rights reserved.
Resumo:
Agricultural management systems can alter the physical and biological soil quality, interfering with crop development. The objective of this study was to evaluate the physical and microbiological attributes of a Red Latosol, and its relationship to the biometric parameters of the common bean (Phaseolus vulgaris), irrigated and grown under two management systems (conventional tillage and direct seeding), in Campinas in the state of Sao Paulo, Brazil. The experimental design was of randomised blocks, with a split-plot arrangement for the management system and soil depth, analysed during the 2006/7 and 2007/8 harvest seasons, with 4 replications. The soil physical and microbiological attributes were evaluated at depths of 0.00-0.05, 0.05-0.10, 0.10-0.20 and 0.20-0.40 m. The following were determined for the crop: density, number of pods per plant, number of beans per pod, thousand seed weight, total weight of the shoots and harvest index. Direct seeding resulted in a lower soil physical quality at a depth of 0.00-0.05 m compared to conventional tillage, while the opposite occurred at a depth of 0.05-0.10 m. The direct seeding showed higher soil biological quality, mainly indicated by the microbial biomass nitrogen, basal respiration and metabolic quotient. The biometric parameters in the bean were higher under the direct seeding compared to conventional tillage.
Resumo:
Exotic species are used to trigger facilitation in restoration plantings, but this positive effect may not be permanent and these species may have negative effects later on. Since such species can provide a marketable product (firewood), their harvest may represent an advantageous strategy to achieve both ecological and economic benefits. In this study, we looked at the effect of removal of a non-native tree species (Mimosa caesalpiniifolia) on the understory of a semideciduous forest undergoing restoration. We assessed two 14-year-old plantation systems (modified taungya agroforestry system; and mixed plantation using commercial timber and firewood tree species) established at two sites with contrasting soil properties in São Paulo state, Brazil. The experimental design included randomized blocks with split plots. The natural regeneration of woody species (height ≥0.2 m) was compared between managed (all M. caesalpiniifolia trees removed) and unmanaged plots during the first year after the intervention. The removal of M. caesalpiniifolia increased species diversity but decreased stand basal area. Nevertheless, the basal area loss was recovered after 1 year. The management treatment affected tree species regeneration differently between species groups. The results of this study suggest that removal of M. caesalpiniifolia benefited the understory and possibly accelerated the succession process. Further monitoring studies are needed to evaluate the longer term effects on stand structure and composition. The lack of negative effects of tree removal on the natural regeneration indicates that such interventions can be recommended, especially considering the expectations of economic revenues from tree harvesting in restoration plantings.
Resumo:
The fierce competitiveness of the current market and the sophistication of customer requirements made the commitment to quality a need within organizations. The search for quality has been carried out by the adoption of quality management systems, a formal organization that should be present throughout the organization, from the initial identification of market needs to the satisfaction of customer requirements. The methodology most commonly used for this purpose is based on the requirements of ISO 9001, latest version of 2008. Considering this scenario, was developed a case study in a small company of the industrial sector with the development of a plan for the implementation of ISO 9001. The proposed methodology involved the construction of a theoretical framework on the subject and the development of a case study with a qualitative approach. Initially, was applied a questionnaire to the representative of the organization about the company's operating procedures, activity logs held, current documentation, planning and resource management for the construction of an assessment about the adequacy of the company needs to ISO 9001. Were obtained as results the characterization of production processes and organizational structure of the company and examples of policy and objectives of quality, performance indicators, document control, system for visualization of non-compliances, among others. Finally, the benefits of adopting a quality management system based on ISO 9001 requirements for the company and its environmental issues such as increased process efficiency, less waste and greater profitability, were pointed out, and the conditions for effective certification in the future
Resumo:
Outsourcing logistics has established itself in the area of the LSP (Logistics Service Provider), which offers a range of services to its customers. In this line, transportation is characterized as one of the most important services, and therefore efficient fleet management is essential for establishing a high level of customer service. With advances in technology and vehicle tracking systems, this approach of management has gained new possibilities for the improvement of logistics services. By studying the specific case of an LSP, this paper investigates the use of these technologies in the management of their business and services. The results indicate that the LSP seeks to increase its services and to streamline information in order to respond to customer needs in real time. It is also evident in this case under study that the combination of the technology available together with the fleet management system has become a distinguishing feature for this LSP, one which increases their skills and important information for both customers and business.
Resumo:
The purpose of this paper is to propose a definition of the term “green/environmental innovation”, based on a systematic literature review. Design/methodology/approach– The literature review conducted in this research was based on papers published in ISI Web of Science and Scopus databases. Findings– Environmental innovations are organizational implementations and changes focusing on the environment, with implications for companies’ products, manufacturing processes and marketing, with different degrees of novelty. They can be merely incremental improvements that intensify the performance of something that already exists, or radical ones that promote something completely unprecedented, where the main objective is to reduce the company's environmental impacts. In addition, environmental innovation has a bilateral relationship with the level of proactive environmental management adopted by companies. Increasing of environmental innovation tends to come up against many barriers.
Resumo:
The aim of this paper is to propose a classification of reverse logistics systems based on activities for value recovery from returned products. Case studies were carried out in three Brazilian companies. Research results show that Company 1 uses a reverse logistics system based on ‘disposal logistics system’, the main reason for returns is ‘end of life’ and the main motivation is ‘legislation’; Company 2 uses ‘Recycling logistics system’, the main reason for the returns is ‘products not sold’ and the main motivation is ‘recovery of assets and value’; finally, Company 3 uses ‘product reprocessing logistics system’, the main reason for returns is ‘end of life’ and the main motivation is ‘social and environmental responsibility’.
Resumo:
The objective of this research is to examine if the environmental management evolution is positively related towards the adoption of green supply chain management practices (GSCM) by companies in the electronics sector in Brazil. To reach this objective, a quantitative research was conducted by survey with 100 companies in the electronics sector in Brazil. The collected data were processed using descriptive statistics, Exploratory Factor Analysis and Structural Equation Modeling. The most important results are: in the sample, GSCM practices to the recovery of investment, as the resale of scrap and other waste materials, and the adequacy with legislation and auditing, obtained high scores; and research hypothesis (H1) was confirmed and considered statistically valid, indicating that, in fact, the evolution of environmental management influences the adoption of GSCM practices.