The brain decade in debate: VIII. Peptide hormones and behavior: cholecystokinin and prolactin

This article is a transcription of an electronic symposium held on November 28, 2000 in which active researchers were invited by the Brazilian Society of Neuroscience and Behavior (SBNeC) to discuss the advances of the last decade in the peptide field with particular focus on central actions of prolactin and cholecystokinin. The comments in this symposium reflect the diversity of prolactin and cholecystokinin research and demonstrate how the field has matured. Since both peptides play a role in reproductive behaviors, particularly mother-infant interactions, this was the starting point of the discussion. Recent findings on the role of the receptor subtypes as well as interaction with other peptides in this context were also discussed. Another issue discussed was the possible role of these peptides in dopamine-mediated rewarding systems. Both prolactin and cholecystokinin are involved in mechanisms controlling food intake and somatic pain thresholds. The role of peripheral inputs through vagal afferents modulating behavior was stressed. The advent of knockout animals as potential generators of new knowledge in this field was also addressed. Finally, interactions with other neuropeptides and investigation of the role of these peptides in other fields such as immunology were mentioned. Knowledge about the central functions of prolactin and cholecystokinin has shown important advances. The role of these peptides in neurological and psychiatric syndromes such as anorexia, drug abuse and physiological disturbances that lead to a compromised maternal behavior seems relevant.

Axonal pathfinding mechanisms at the cortical midline and in the development of the corpus callosum

The corpus callosum is a large fiber tract that connects neurons in the right and left cerebral hemispheres. Agenesis of the corpus callosum (ACC) is associated with a large number of human syndromes but little is known about why ACC occurs. In most cases of ACC, callosal axons are able to grow toward the midline but are unable to cross it, continuing to grow into large swirls of axons known as Probst bundles. This phenotype suggests that in some cases ACC may be due to defects in axonal guidance at the midline. General guidance mechanisms that influence the development of axons include chemoattraction and chemorepulsion, presented by either membrane-bound or diffusible molecules. These molecules are not only expressed by the final target but by intermediate targets along the pathway, and by pioneering axons that act as guides for later arriving axons. Midline glial populations are important intermediate targets for commissural axons in the spinal cord and brain, including the corpus callosum. The role of midline glial populations and pioneering axons in the formation of the corpus callosum are discussed. Finally the differential guidance of the ipsilaterally projecting perforating pathway and the contralaterally projecting corpus callosum is addressed. Development of the corpus callosum involves the coordination of a number of different guidance mechanisms and the probable involvement of a large number of molecules.

Antagonism of the acute hemodynamic effects of captopril in decompensated congestive heart failure by aspirin administration

The concomitant use of angiotensin-converting enzyme inhibitors and aspirin may cause pharmacological antagonism. Hence we examined the effect of aspirin on the neurohormonal function and hemodynamic response to captopril in heart failure patients. Between April 1999 and August 2000, 40 patients were randomized into four equal groups: 1) captopril, 2) aspirin, 3) captopril-aspirin: captopril was given alone on the first day, followed by aspirin on the remaining days, and 4) aspirin-captopril: aspirin was given alone on the first day, followed by captopril on the remaining days. Hemodynamic, norepinephrine and prostaglandin measurements were performed pre- and post-medication for 4 days. Captopril (50 mg) was given orally every 8 h and 300 mg aspirin was given on the first day, and 100 mg/day thereafter. In the captopril group and only on the first day of captopril-aspirin, captopril produced increases in cardiac index (2.1 ± 0.6 to 2.5 ± 0.5 l min-1 m-2, P<0.0001), and reduced peripheral vascular resistance (1980 ± 580 to 1545 ± 506 dyn s-1 cm-5/m², P<0.0001) and pulmonary wedge pressure (20 ± 4 to 15 ± 4 mmHg, P<0.0001). In contrast, aspirin alone or associated with captopril showed no significant hemodynamic changes. Norepinephrine decreased (P<0.02) only in the captopril group. Prostaglandin levels did not differ significantly among groups. Thus, aspirin compromises the short-term hemodynamic and neurohormonal effects of captopril in patients with acute decompensated heart failure.

Fuzzy tolerance/equivalence relations from intersection, union and complement operators and their application to a clustering method

This master thesis work introduces the fuzzy tolerance/equivalence relation and its application in cluster analysis. The work presents about the construction of fuzzy equivalence relations using increasing generators. Here, we investigate and research on the role of increasing generators for the creation of intersection, union and complement operators. The objective is to develop different varieties of fuzzy tolerance/equivalence relations using different varieties of increasing generators. At last, we perform a comparative study with these developed varieties of fuzzy tolerance/equivalence relations in their application to a clustering method.

Massataseiden laskentatyökalujen kehitys bench-kokoluokan reaktiivisuuskoelaitteelle

Tässä työssä tarkastellaan kehitettyjä laskentatyökaluja VTT:n Jyväskylän toimipisteen bench-kokoluokan reaktiivisuuskoelaitteiston tulosten käsittelyn nopeuttamiseksi. Työkalut kehitettiin Matlab- ohjelmistossa. Toinen työkalu toimii Savcor Wedge prosessinhallintaohjelmassa reaaliaikaisena laskentatyökaluna. Tulosten varmentamiseen ja tarkistamiseen kehitetty työkalu toimii Matlabissa mittauksista tuodulla mittausdatalla. Työn aluksi tarkastellaan yleisesti palamista ja sen eri vaiheita. Tämän jälkeen esitellään koelaitteisto, jolle analyysityökalut kehitettiin. Koelaitteiston kanssa esitellään esimerkki polttoainepanoskokeista, joiden tutkimisen nopeuttamiseen laskentatyökalut soveltuu. Laskentatyökalujen toiminta esitetään pääpiirteittäin ja niiden välinen tarkkuusero selvennetään.

Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Topographic aspects of photic driving in the electroencephalogram of children and adolescents

The electroencephalogram amplitude spectra at 11 fixed frequencies of intermittent photic stimulation of 3 to 24 Hz were combined into driving "profiles" for 14 scalp points in 8 male and 7 female normal subjects aged 9 to 17 years. The driving response varied over frequency and was detected in 70 to 100% of cases in the occipital areas (maximum) and in 27 to 77% of cases in the frontal areas (minimum) using as a criterion peak amplitude 20% higher than those of the neighbors. Each subject responded, on average, to 9.7 ± 1.15 intermittent photic stimulation frequencies in the right occipital area and to 6.8 ± 1.97 frequencies in the right frontal area. Most of the driving responses (in relation to the previous background) were significant according to the spectral F-test (a = 0.05), which also detected changes in some cases of low amplitude responses not revealed by the peak criterion. The profiles had two maxima in the alpha and theta bands in all leads. The latter was not present in the background spectra in the posterior areas and was less pronounced in the anterior ones. The weight of the profile theta maximum increased towards the frontal areas where the two maxima were similar, while the profile amplitudes decreased. The profiles repeated the shape of the background spectra, except for the theta band. The interhemispheric correlation between profiles was high. The theta driving detected in all areas recorded suggests a generalized influence of the theta generators in prepubertal and pubertal subjects.

One-year follow-up of the effects of sildenafil on pulmonary arterial hypertension and veno-occlusive disease

We hypothesized that chronic oral administration of the phosphodiesterase-5 inhibitor sildenafil could improve the exercise capacity and pulmonary hemodynamics in patients with pulmonary arterial hypertension (PAH) on the basis of previous short-term studies. We tested this hypothesis in 14 subjects with PAH, including seven patients with the idiopathic form and seven patients with atrial septal defects, but no other congenital heart abnormalities. Patients were subjected to a 6-min walk test and dyspnea was graded according to the Borg scale. Pulmonary flow and pressures were measured by Doppler echocardiography. Patients were given sildenafil, 75 mg orally three times a day, and followed up for 1 year. Sildenafil therapy resulted in the following changes: increase in the 6-min walk distance from a median value of 387 m (range 0 to 484 m) to 462 m (range 408 to 588 m; P < 0.01), improvement of the Borg dyspnea score from 4.0 (median value) to 3.0 (P < 0.01), and increased pulmonary flow (velocity-time integral) from a median value of 0.12 (range 0.08 to 0.25) to 0.23 (range 0.11 to 0.40; P < 0.01) with no changes in pulmonary pressures. In one patient with pulmonary veno-occlusive disease diagnosed by a lung biopsy, sildenafil had a better effect on the pulmonary wedge pressure than inhaled nitric oxide (15 and 29 mmHg, respectively, acute test). He walked 112 m at baseline and 408 m at one year. One patient died at 11 months of treatment. No other relevant events occurred. Thus, chronic administration of sildenafil improves the physical capacity of PAH patients and may be beneficial in selected cases of veno-occlusive disease.

Unequal Teeth Widths for Torque Ripple Reduction in Permanent Magnet Synchronous Machines With Fractional-Slot Non-Overlapping Windings

Permanent magnet synchronous machines with fractional-slot non-overlapping windings (FSPMSM), also known as tooth-coil winding permanent magnet synchronous machines (TCW PMSM), have been under intensive research during the latest decade. There are many optimization routines explained and implemented in the literature in order to improve the characteristics of this machine type. This paper introduces a new technique for torque ripple minimization in TCW PMSM. The source of torque harmonics is also described. The low order torque harmonics can be harmful for a variety of applications, such as direct drive wind generators, direct drive light vehicle electrical motors, and for some high precision servo applications. The reduction of the torque ripple harmonics with the lowest orders (6th and 12th) is realized by machine geometry optimization technique using finite element analysis (FEA). The presented optimization technique includes the stator geometry adjustment in TCW PMSMs with rotor surface permanent magnets and with rotor embedded permanent magnets. Influence of the permanent magnet skewing on the torque ripple reduction and cogging torque elimination was also investigated. It was implemented separately and together with the stator optimization technique. As a result, the reduction of some torque ripple harmonics was attained.

Effect of saline infusion for the maintenance of blood volume on pulmonary gas exchange during temporary abdominal aortic occlusion

We analyzed the effects of saline infusion for the maintenance of blood volume on pulmonary gas exchange in ischemia-reperfusion syndrome during temporary abdominal aortic occlusion in dogs. We studied 20 adult mongrel dogs weighing 12 to 23 kg divided into two groups: ischemia-reperfusion group (IRG, N = 10) and IRG submitted to saline infusion for the maintenance of mean pulmonary arterial wedge pressure between 10 and 20 mmHg (IRG-SS, N = 10). All animals were anesthetized and maintained on spontaneous ventilation. After obtaining baseline measurements, occlusion of the supraceliac aorta was performed by the inflation of a Fogarty catheter. After 60 min of ischemia, the balloon was deflated and the animals were observed for another 60 min of reperfusion. The measurements were made at 10 and 45 min of ischemia, and 5, 30, and 60 min of reperfusion. Pulmonary gas exchange was impaired in the IRG-SS group as demonstrated by the increase of the alveolar-arterial oxygen difference (21 ± 14 in IRG-SS vs 11 ± 8 in IRG after 60 min of reperfusion, P = 0.004 in IRG-SS in relation to baseline values) and the decrease of oxygen partial pressure in arterial blood (58 ± 15 in IRG-SS vs 76 ± 15 in IRG after 60 min of reperfusion, P = 0.001 in IRG-SS in relation to baseline values), which was correlated with the highest degree of pulmonary edema in morphometric analysis (0.16 ± 0.06 in IRG-SS vs 0.09 ± 0.04 in IRG, P = 0.03 between groups). There was also a smaller ventilatory compensation of metabolic acidosis after the reperfusion. We conclude that infusion of normal saline worsened the gas exchange induced by pulmonary reperfusion injury in this experimental model.

Control of respiration in fish, amphibians and reptiles

Fish and amphibians utilise a suction/force pump to ventilate gills or lungs, with the respiratory muscles innervated by cranial nerves, while reptiles have a thoracic, aspiratory pump innervated by spinal nerves. However, fish can recruit a hypobranchial pump for active jaw occlusion during hypoxia, using feeding muscles innervated by anterior spinal nerves. This same pump is used to ventilate the air-breathing organ in air-breathing fishes. Some reptiles retain a buccal force pump for use during hypoxia or exercise. All vertebrates have respiratory rhythm generators (RRG) located in the brainstem. In cyclostomes and possibly jawed fishes, this may comprise elements of the trigeminal nucleus, though in the latter group RRG neurons have been located in the reticular formation. In air-breathing fishes and amphibians, there may be separate RRG for gill and lung ventilation. There is some evidence for multiple RRG in reptiles. Both amphibians and reptiles show episodic breathing patterns that may be centrally generated, though they do respond to changes in oxygen supply. Fish and larval amphibians have chemoreceptors sensitive to oxygen partial pressure located on the gills. Hypoxia induces increased ventilation and a reflex bradycardia and may trigger aquatic surface respiration or air-breathing, though these latter activities also respond to behavioural cues. Adult amphibians and reptiles have peripheral chemoreceptors located on the carotid arteries and central chemoreceptors sensitive to blood carbon dioxide levels. Lung perfusion may be regulated by cardiac shunting and lung ventilation stimulates lung stretch receptors.

Luonnonkiertovirtauksen kääntyminen pystyhöyrystimen lämmönvaihtoputkissa

Diplomityössä tutkitaan virtauksen kääntymistä Lappeenrannan teknillisen yliopiston PWR PACTEL –koelaitteiston pystyhöyrystimen lämmönvaihtoputkissa käyttäen APROS–prosessisimulointiohjelmaa. Työn teoriaosassa esitellään pystyhöyrystimillä varustettuja koelaitteistoja, erityisesti PWR PACTEL ja sen höyrystin. Lisäksi esitellään virtauksen kääntymisestä tehtyjä havaintoja ja käsitellään kääntymistä teoreettisesta näkökulmasta. Simulointiosan alussa esitellään työssä käytetty APROS –prosessisimulointiohjelma, sekä sen avulla höyrystimestä luodut mallit. Työssä on tutkittu virtauksen käännöstapahtumaa simuloimalla useita eri transienttitilanteita pienillä primäärimassavirroilla. Simulaatiotapauksissa havaittiin virtauksen kääntyvän höyrystimen eripituisissa lämmönvaihtoputkissa, tilanteesta riippuen pääosin lyhimmissä tai toisiksi lyhimmissä lämmönvaihtoputkissa. Transienttien eri vaiheiden, ts. primäärimassavirran muutos- ja tasaantumisvaiheiden pituuden havaittiin vaikuttavan siihen, minkä pituisissa putkissa kääntyminen tapahtuu ja missä järjestyksessä.

Doubly fed wind turbine performance in variable grid conditions

Wind turbines based on doubly fed induction generators (DFIG) become the most popular solution in high power wind generation industry. While this topology provides great performance with the reduced power rating of power converter, it has more complicated structure in comparison with full-rated topologies, and therefore leads to complexity of control algorithms and electromechanical processes in the system. The purpose of presented study is to present a proper vector control scheme for the DFIG and overall control for the WT to investigate its behavior at different wind speeds and in different grid voltage conditions: voltage sags, magnitude and frequency variations. The key principles of variable-speed wind turbine were implemented in simulation model and demonstrated during the study. Then, based on developed control scheme and mathematical model, the set of simulation is made to analyze reactive power capabilities of the DFIG wind turbine. Further, the rating of rotor-side converter is modified to not only generate active rated active power, but also to fulfill Grid Codes. Results of modelling and analyzing of the DFIG WT behavior under different speeds and different voltage conditions are presented in the work.

Quality evaluation of parmesan-type cheese: a chemometric approach

Parmesan-type cheeses are the most consumed special cheeses in Brazil. It is generally sold in retail shops, either grated or in wedge-shaped pieces, and its quality varies considerably, which is reflected directly in its price. There is lack of processing standardization and, since the ripening period is fundamental for the quality of this hard, semi-fat cooked cheese, this stage seems to be the thin line between low and high quality products. It is important to note that the Italian Parmegiano Reggiano is matured for a period of twelve months, as well as its rival Grana Padano, and this long ripening period causes changes making them gourmet, highly-valued cheeses. In the present study, twelve different Parmesan-type cheeses were purchased from the Brazilian retail market and evaluated for microbiological, physicochemical, and instrumental parameters. Heterogeneous quality was confirmed by microbiological problems detected in the samples and physicochemical composition that did not meet current Brazilian specifications. The use of principal component analysis and hierarchical cluster analysis made it possible to separate the samples into three distinct groups, mainly due to different acidity and moisture levels, water activity, and hardness values. The price per kg was also considered and was correlated with moisture, acidity, and texture.

Hydrologisen tilanteen ja tuulivoimatuotannon muutosten vaikutus vesiarvoihin pohjoismaisilla sähkön spot-markkinoilla

Vesivoimalla on merkittävä rooli pohjoismaisessa sähköntuotantojärjestelmässä. Spot-markkinoille tarjottavan vesivoiman hinta riippuu vaihtoehtoisen tuotannon hinnasta ja odotetusta vesivoimantuottajien käytettävissä olevasta veteen sitoutuneen potentiaalienergian määrästä. Hydrologisella tilanteella tarkoitetaan tässä tämän potentiaalienergian poikkeamaa normaalitasostaan. Viime vuosina tuulivoimatuotanto pohjoismaisella sähkömarkkina-alueella on kasvanut voimakkaasti, ja on tullut aiheelliseksi tarkastella, millaisia vaikutuksia tällä on vesivoimantuottajien toimintaan. Työssä määritellään vesivoimalle vaihtoehtoisen sähköntuotannon tuotantokustannus, joka pitkällä aikavälillä toimii vertailutasona, jonka perusteella vesivoimantuottajat määrittävät markkinoilla tarjontahinnan tuotannolleen. Tarkastellaan, kuinka hydrologisen tilanteen ja vaihtoehtoisen tuotannon tuotantokustannusten muutokset vaikuttavat vesiarvoon, joka on hinta, jolla hintariippuvaista eli säätyvää vesivoimaa tarjotaan spot-markkinoille. Todetaan, että hydrologisen tilanteen vahvistuminen ja vaihtoehtoisen tuotantokustannuksen aleneminen alentavat vesiarvoja. Todetaan lisäksi, että tuulivoima vaikuttaa sähkön hinnanmuodostukseen markkinoilla samankaltaisesti kuin hintariippumaton vesivoimatuotanto. Esitetään aikasarjamalli vesivoimatuotannon hintariippuvuuden mallintamiseksi. Vertaillaan vesivoimatuottajien toimintaa kahdella vesivoimatuotantoa sisältävällä hinta-alueella, joista toisella tuulivoimatuotanto on kasvanut voimakkaammin kuin toisella. Havaitaan, että molemmilla hinta-alueilla hydrologisen tilanteen vahvistuminen on alentanut ja heikkeneminen nostanut vesiarvoja. Lisäksi havaitaan, että alueella, jonka tuulivoimatuotanto on kasvanut enemmän, vesiarvot ovat laskeneet suhteessa alueen, jolla tuulivoimatuotanto on kasvanut vähemmän, vesiarvoihin. Tuulivoiman voidaan todeta syrjäyttäneen markkinoilta tuotantokustannuksiltaan kalliimpaa tuotantoa.