Mid-infrared spectroscopy of lensed galaxies at 1 < z < 3: The nature of sources near the MIPS confusion limit

We present Spitzer IRS mid-infrared spectra for 15 gravitationally lensed, 24 μm-selected galaxies, and combine the results with four additional very faint galaxies with IRS spectra in the literature. The median intrinsic 24 μm flux density of the sample is 130 μJy, enabling a systematic survey of the spectral properties of the very faint 24 μm sources that dominate the number counts of Spitzer cosmological surveys. Six of the 19 galaxy spectra (32%) show the strong mid-IR continuua expected of AGNs; X-ray detections confirm the presence of AGNs in three of these cases, and reveal AGNs in two other galaxies. These results suggest that nuclear accretion may contribute more flux to faint 24 μm-selected samples than previously assumed. Almost all the spectra show some aromatic (PAH) emission features; the measured aromatic flux ratios do not show evolution from z = 0. In particular, the high signal-to-noise mid-IR spectrum of SMM J163554.2+661225 agrees remarkably well with low-redshift, lower luminosity templates. We compare the rest-frame 8 μm and total infrared luminosities of star-forming galaxies, and find that the behavior of this ratio with total IR luminosity has evolved modestly from z = 2 to z = 0. Since the high aromatic-to-continuum flux ratios in these galaxies rule out a dominant contribution by AGNs, this finding implies systematic evolution in the structure and/or metallicity of infrared sources with redshift. It also has implications for the estimates of star-forming rates inferred from 24 μm measurements, in the sense that at z ~ 2, a given observed frame 24 μm luminosity corresponds to a lower bolometric luminosity than would be inferred from low-redshift templates of similar luminosity at the corresponding rest wavelength.

Tubular micro- and nanostructures of TCO materials grown by a vapor-solid method

Microtubes and rods with nanopipes of transparent conductive oxides (TCO), such as SnO_2, TiO_2, ZnO and In_2O_3, have been fabricated following a vapor-solid method which avoids the use of catalyst or templates. The morphology of the as-grown tubular structures varies as a function of the precursor powder and the parameters employed during the thermal treatments carried out under a controlled argon flow. These materials have been also doped with different elements of technological interest (Cr, Er, Li, Zn, Sn). Energy Dispersive X-ray Spectroscopy (EDS) measurements show that the concentration of the dopants achieved by the vapor-solid method ranges from 0.5 to _3 at.%. Luminescence of the tubes has been analyzed, with special attention paid to the influence of the dopants on their optical properties. In this work, we summarize and discuss some of the processes involved not only in the anisotropic growth of these hollow micro and nanostructures, but also in their doping.

Concepções dos professores da educação básica sobre as feiras de ciência

Currently the Science fairs in Brazil have gained great incentive, examples are the regulations that the government has been implementing in education and the financing of public calls for events throughout the national territory. However, even with this incentive, some researchers point out that the scientific fairs and shows are still interpreted as an extemporaneous work by teachers. In order to know the views of basic education teachers about the fairs of Science, proposed to carry out this research. Given this situation, based mediation theory and sociocultural interaction Vygotsky (2001), the theory of instrumentalism Dewey (2002) and the proposed education through research Galiazzi e Moraes (2002), we sought to understand the importance of fair and their benefits as well as the presence in the talks of respondents. In order to analyze the answers of respondents, used to discourse analysis proposed by Eni Orlandi (2009), in which it is observed and is an interpretation of the speech of teachers, considering their interpretation and how to shape their thinking on the research object. In analyzing the results of the survey, it was noted that the teachers interviewed know the importance and objectives of science fairs, however experience difficulties that often does not allow these events to be carried out. In seeking to assist them to minimize these difficulties, it was realized the need for a product to make available guidance on how to develop research projects and assemblies of science fairs, that would provide an education for the research. Thus, resulting from research, was set up a blog and a booklet with texts, articles and report templates.

Discriminating ambulation using a smart sensing plate

The automated sensing scheme described in this paper has the potential to automatically capture, discriminate and classify transients in gait. The mechanical simplicity of the walking platform offers advantages over standard force plates. There is less restriction on dimensions offering the opportunity for multi-contact and multiple steps. This addresses the challenge of patient targeting and the evaluation of patients in a variety of ambulatory applications. In this work the sensitivity of the distributive tactile sensing method has been investigated experimentally. Using coupled time series data from a small number of sensors, gait patterns are compared with stored templates using a pattern recognition algorithm. By using a neural network these patterns were interpreted classifying normal and affected walking events with an accuracy of just under 90%. This system has potential in gait analysis and rehabilitation as a tool for early diagnosis in walking disorders, for determining response to therapy and for identifying changes between pre and post operative gait. Copyright © 2009 by ASME.

Barriers and Facilitators to Adoption of Genomic Services for Colorectal Care within the Veterans Health Administration.

We examined facilitators and barriers to adoption of genomic services for colorectal care, one of the first genomic medicine applications, within the Veterans Health Administration to shed light on areas for practice change. We conducted semi-structured interviews with 58 clinicians to understand use of the following genomic services for colorectal care: family health history documentation, molecular and genetic testing, and genetic counseling. Data collection and analysis were informed by two conceptual frameworks, the Greenhalgh Diffusion of Innovation and Andersen Behavioral Model, to allow for concurrent examination of both access and innovation factors. Specialists were more likely than primary care clinicians to obtain family history to investigate hereditary colorectal cancer (CRC), but with limited detail; clinicians suggested templates to facilitate retrieval and documentation of family history according to guidelines. Clinicians identified advantage of molecular tumor analysis prior to genetic testing, but tumor testing was infrequently used due to perceived low disease burden. Support from genetic counselors was regarded as facilitative for considering hereditary basis of CRC diagnosis, but there was variability in awareness of and access to this expertise. Our data suggest the need for tools and policies to establish and disseminate well-defined processes for accessing services and adhering to guidelines.

Formation of sub-7 nm feature size PS-b-P4VP block copolymer structures by solvent vapour process

The nanometer range structure produced by thin films of diblock copolymers makes them a great of interest as templates for the microelectronics industry. We investigated the effect of annealing solvents and/or mixture of the solvents in case of symmetric Poly (styrene-block-4vinylpyridine) (PS-b-P4VP) diblock copolymer to get the desired line patterns. In this paper, we used different molecular weights PS-b-P4VP to demonstrate the scalability of such high χ BCP system which requires precise fine-tuning of interfacial energies achieved by surface treatment and that improves the wetting property, ordering, and minimizes defect densities. Bare Silicon Substrates were also modified with polystyrene brush and ethylene glycol self-assembled monolayer in a simple quick reproducible way. Also, a novel and simple in situ hard mask technique was used to generate sub-7nm Iron oxide nanowires with a high aspect ratio on Silicon substrate, which can be used to develop silicon nanowires post pattern transfer.

Active Surface Deformation Technology for Management of Marine Biofouling

Biofouling, the accumulation of biomolecules, cells, organisms and their deposits on submerged and implanted surfaces, is a ubiquitous problem across various human endeavors including maritime operations, medicine, food industries and biotechnology. Since several decades, there have been substantial research efforts towards developing various types of antifouling and fouling release approaches to control bioaccumulation on man-made surfaces. In this work we hypothesized, investigated and developed dynamic change of the surface area and topology of elastomers as a general approach for biofouling management. Further, we combined dynamic surface deformation of elastomers with other existing antifouling and fouling-release approaches to develop multifunctional, pro-active biofouling control strategies.

This research work was focused on developing fundamental, new and environment-friendly approaches for biofouling management with emphasis on marine model systems and applications, but which also provided fundamental insights into the control of infectious biofilms on biomedical devices. We used different methods (mechanical stretching, electrical-actuation and pneumatic-actuation) to generate dynamic deformation of elastomer surfaces. Our initial studies showed that dynamic surface deformation methods are effective in detaching laboratory grown bacterial biofilms and barnacles. Further systematic studies revealed that a threshold critical surface strain is required to debond a biofilm from the surface, and this critical strain is dependent on the biofilm mechanical properties including adhesion energy, thickness and modulus. To test the dynamic surface deformation approach in natural environment, we conducted field studies (at Beaufort, NC) in natural seawater using pneumatic-actuation of silicone elastomer. The field studies also confirmed that a critical substrate strain is needed to detach natural biofilm accumulated in seawater. Additionally, the results from the field studies suggested that substrate modulus also affect the critical strain needed to debond biofilms. To sum up, both the laboratory and the field studies proved that dynamic surface deformation approach can effectively detach various biofilms and barnacles, and therefore offers a non-toxic and environmental friendly approach for biofouling management.

Deformable elastomer systems used in our studies are easy to fabricate and can be used as complementary approach for existing commercial strategies for biofouling control. To this end, we aimed towards developed proactive multifunctional surfaces and proposed two different approaches: (i) modification of elastomers with antifouling polymers to produce multifunctional, and (ii) incorporation of silicone-oil additives into the elastomer to enhance fouling-release performance.

In approach (i), we modified poly(vinylmethylsiloxane) elastomer surfaces with zwitterionic polymers using thiol-ene click chemistry and controlled free radical polymerization. These surfaces exhibited both fouling resistance and triggered fouling-release functionalities. The zwitterionic polymers exhibited fouling resistance over short-term (∼hours) exposure to bacteria and barnacle cyprids. The biofilms that eventually accumulated over prolonged-exposure (∼days) were easily detached by applying mechanical strain to the elastomer substrate. In approach (ii), we incorporated silicone-oil additives in deformable elastomer and studied synergistic effect of silicone-oils and surface strain on barnacle detachment. We hypothesized that incorporation of silicone-oil additive reduces the amount of surface strain needed to detach barnacles. Our experimental results supported the above hypothesis and suggested that surface-action of silicone-oils plays a major role in decreasing the strain needed to detach barnacles. Further, we also examined the effect of change in substrate modulus and showed that stiffer substrates require lower amount of strain to detach barnacles.

In summary, this study shows that (1) dynamic surface deformation can be used as an effective, environmental friendly approach for biofouling control (2) stretchable elastomer surfaces modified with anti-fouling polymers provides a pro-active, dual-mode approach for biofouling control, and (3) incorporation of silicone-oils additives into stretchable elastomers improves the fouling-release performance of dynamic surface deformation technology. Dynamic surface deformation by itself and as a supplementary approach can be utilized biofouling management in biomedical, industrial and marine applications.

Biologically Inspired Design of Protein-Silica Hybrid Nanoparticles for Drug Delivery Applications

The design and application of effective drug carriers is a fundamental concern in the delivery of therapeutics for the treatment of cancer and other vexing health problems. Traditionally utilized chemotherapeutics are limited in efficacy due to poor bioavailability as a result of their size and solubility as well as significant deleterious effects to healthy tissue through their inability to preferentially target pathological cells and tissues, especially in treatment of cancer. Thus, a major effort in the development of nanoscopic drug delivery vehicles for cancer treatment has focused on exploiting the inherent differences in tumor physiology and limiting the exposure of drugs to non-tumorous tissue, which is commonly achieved by encapsulation of chemotherapeutics within macromolecular or supramolecular carriers that incorporate targeting ligands and that enable controlled release. The overall aim of this work is to engineer a hybrid nanomaterial system comprised of protein and silica and to characterize its potential as an encapsulating drug carrier. The synthesis of silica, an attractive nanomaterial component because it is both biocompatible as well as structurally and chemically stable, within this system is catalyzed by self-assembled elastin-like polypeptide (ELP) micelles that incorporate of a class of biologically-inspired, silica-promoting peptides, silaffins. Furthermore, this methodology produces near-monodisperse, hybrid inorganic/micellar materials under mild reaction conditions such as temperature, pH and solvent. This work studies this material system along three avenues: 1) proof-of-concept silicification (i.e. the formation and deposition of silica upon organic materials) of ELP micellar templates, 2) encapsulation and pH-triggered release of small, hydrophobic chemotherapeutics, and 3) selective silicification of templates to potentiate retention of peptide targeting ability.

Role of Vinculin in Regulating Force-Sensitive Dynamics of Adherens Junctions During Collective Cell Migration

Dynamic processes such as morphogenesis and tissue patterning require the precise control of many cellular processes, especially cell migration. Historically, these processes are thought to be mediated by genetic and biochemical signaling pathways. However, recent advances have unraveled a previously unappreciated role of mechanical forces in regulating these homeostatic processes in of multicellular systems. In multicellular systems cells adhere to both deformable extracellular matrix (ECM) and other cells, which are sources of applied forces and means of mechanical support. Cells detect and respond to these mechanical signals through a poorly understood process called mechanotransduction, which can have profound effects on processes such as cell migration. These effects are largely mediated by the sub cellular structures that link cells to the ECM, called focal adhesions (FAs), or cells to other cells, termed adherens junctions (AJs).

Overall this thesis is comprised of my work on identifying a novel force dependent function of vinculin, a protein which resides in both FAs and AJs - in dynamic process of collective migration. Using a collective migration assay as a model for collective cell behavior and a fluorescence resonance energy transfer (FRET) based molecular tension sensor for vinculin I demonstrated a spatial gradient of tension across vinculin in the direction of migration. To define this novel force-dependent role of vinculin in collective migration I took advantage of previously established shRNA based vinculin knock down Marin-Darby Canine Kidney (MDCK) epithelial cells.

The first part of my thesis comprises of my work demonstrating the mechanosensitive role of vinculin at AJ’s in collectively migrating cells. Using vinculin knockdown cells and vinculin mutants, which specifically disrupt vinculin’s ability to bind actin (VinI997A) or disrupt its ability to localize to AJs without affecting its localization at FAs (VinY822F), I establish a role of force across vinculin in E-cadherin internalization and clipping. Furthermore by measuring E-cadherin dynamics using fluorescence recovery after bleaching (FRAP) analysis I show that vinculin inhibition affects the turnover of E-cadherin at AJs. Together these data reveal a novel mechanosensitive role of vinculin in E-cadherin internalization and turnover in a migrating cell layer, which is contrary to the previously identified role of vinculin in potentiating E-cadherin junctions in a static monolayer.

For the last part of my thesis I designed a novel tension sensor to probe tension across N-cadherin (NTS). N-cadherin plays a critical role in cardiomyocytes, vascular smooth muscle cells, neurons and neural crest cells. Similar to E-cadherin, N-cadherin is also believed to bear tension and play a role in mechanotransduction pathways. To identify the role of tension across N-cadherin I designed a novel FRET-based molecular tension sensor for N-cadherin. I tested the ability of NTS to sense molecular tension in vascular smooth muscle cells, cardiomyocytes and cancer cells. Finally in collaboration with the Horwitz lab we have been able to show a role of tension across N-cadherin in synaptogenesis of neurons.

Electron beam lithography assisted high-resolution pattern generation

This thesis details the top-down fabrication of nanostructures on Si and Ge substrates by electron beam lithography (EBL). Various polymeric resist materials were used to create nanopatterns by EBL and Chapter 1 discusses the development characteristics of these resists. Chapter 3 describes the processing parameters, resolution and topographical and structural changes of a new EBL resist known as ‘SML’. A comparison between SML and the standard resists PMMA and ZEP520A was undertaken to determine the suitability of SML as an EBL resist. It was established that SML is capable of high-resolution patterning and showed good pattern transfer capabilities. Germanium is a desirable material for use in microelectronic applications due to a number of superior qualities over silicon. EBL patterning of Ge with high-resolution hydrogen silsesquioxane (HSQ) resist is however difficult due to the presence of native surface oxides. Thus, to combat this problem a new technique for passivating Ge surfaces prior to EBL processes is detailed in Chapter 4. The surface passivation was carried out using simple acids like citric acid and acetic acid. The acids were gentle on the surface and enabled the formation of high-resolution arrays of Ge nanowires using HSQ resist. Chapter 5 details the directed self-assembly (DSA) of block copolymers (BCPs) on EBL patterned Si and, for the very first time, Ge surfaces. DSA of BCPs on template substrates is a promising technology for high volume and cost effective nanofabrication. The BCP employed for this study was poly (styrene-b-ethylene oxide) and the substrates were pre-defined by HSQ templates produced by EBL. The DSA technique resulted into pattern rectification (ordering in BCP) and in pattern multiplication within smaller areas.

Site controlled red-yellow-green light emitting InGaN quantum discs on nano-tipped GaN rods

We report a method of growing site controlled InGaN multiple quantum discs (QDs) at uniform wafer scale on coalescence free ultra-high density (>80%) nanorod templates by metal organic chemical vapour deposition (MOCVD). The dislocation and coalescence free nature of the GaN space filling nanorod arrays eliminates the well-known emission problems seen in InGaN based visible light sources that these types of crystallographic defects cause. Correlative scanning transmission electron microscopy (STEM), energy-dispersive X-ray (EDX) mapping and cathodoluminescence (CL) hyperspectral imaging illustrates the controlled site selection of the red, yellow and green (RYG) emission at these nano tips. This article reveals that the nanorod tips' broad emission in the RYG visible range is in fact achieved by manipulating the InGaN QD's confinement dimensions, rather than significantly increasing the In%. This article details the easily controlled method of manipulating the QDs dimensions producing high crystal quality InGaN without complicated growth conditions needed for strain relaxation and alloy compositional changes seen for bulk planar GaN templates.

Accumulation de dose à partir de champs de déformation 4D appliqués aux traitements au CyberKnife et à l'IMRT

Le cancer pulmonaire est la principale cause de décès parmi tous les cancers au Canada. Le pronostic est généralement faible, de l'ordre de 15% de taux de survie après 5 ans. Les déplacements internes des structures anatomiques apportent une incertitude sur la précision des traitements en radio-oncologie, ce qui diminue leur efficacité. Dans cette optique, certaines techniques comme la radio-chirurgie et la radiothérapie par modulation de l'intensité (IMRT) visent à améliorer les résultats cliniques en ciblant davantage la tumeur. Ceci permet d'augmenter la dose reçue par les tissus cancéreux et de réduire celle administrée aux tissus sains avoisinants. Ce projet vise à mieux évaluer la dose réelle reçue pendant un traitement considérant une anatomie en mouvement. Pour ce faire, des plans de CyberKnife et d'IMRT sont recalculés en utilisant un algorithme Monte Carlo 4D de transport de particules qui permet d'effectuer de l'accumulation de dose dans une géométrie déformable. Un environnement de simulation a été développé afin de modéliser ces deux modalités pour comparer les distributions de doses standard et 4D. Les déformations dans le patient sont obtenues en utilisant un algorithme de recalage déformable d'image (DIR) entre les différentes phases respiratoire générées par le scan CT 4D. Ceci permet de conserver une correspondance de voxels à voxels entre la géométrie de référence et celles déformées. La DIR est calculée en utilisant la suite ANTs («Advanced Normalization Tools») et est basée sur des difféomorphismes. Une version modifiée de DOSXYZnrc de la suite EGSnrc, defDOSXYZnrc, est utilisée pour le transport de particule en 4D. Les résultats sont comparés à une planification standard afin de valider le modèle actuel qui constitue une approximation par rapport à une vraie accumulation de dose en 4D.

Melt climatology estimates for small to giant Antarctic icebergs, links to NetCDF files

We present four melt climatology estimates based on a simulation of Antarctic iceberg drift and melting that includes small, medium-sized, and giant tabular icebergs with a realistic size distribution. Drift and meltdown is simulated using vertical profiles of ocean currents, temperature, and salinity, which goes beyond the present standard in iceberg modeling. The climatology estimates based on simulations of small (SMA), 'small-to-medium'-sized (MED12 & MED123), and small-to-giant icebergs (ALL) exhibit differential characteristics: successive inclusion of larger icebergs leads to a reduced seasonality of iceberg melt and a shift of the mass input to the area north of 58°S, while less melt water is released into the coastal areas. This highlights the necessity to account for larger and giant icebergs in order to obtain accurate melt climatologies. The four monthly melt climatologies [mm/day] are available as netCDF files with 1°x1° spatial resolution and can be used, e.g., for sensitivity studies with uncoupled sea ice-ocean models, or as spatio-temporal templates for the redistribution of land ice from the Antarctic ice sheet over the Southern Ocean in climate models.

Model Development Guidelines for UML-RT: Conventions, Patterns and Antipatterns

Software development guidelines are a set of rules which can help improve the quality of software. These rules are defined on the basis of experience gained by the software development community over time. This paper discusses a set of design guidelines for model-based development of complex real-time embedded software systems. To be precise, we propose nine design conventions, three design patterns and thirteen antipatterns for developing UML-RT models. These guidelines have been identified based on our analysis of around 100 UML-RT models from industry and academia. Most of the guidelines are explained with the help of examples, and standard templates from the current state of the art are used for documenting the design rules.

Accommodating Muslim Minorities in Secular Societies: Public Education in England, Scotland, Ontario, and Quebec

Abstract This thesis examines one of the most sensitive challenges facing contemporary democracies: the accommodation of Muslim minorities in public institutions and services. It focuses on the field of education, and on two particular issues: the public funding of Islamic schools and the accommodation of Muslim needs in public secular schools. The analysis is based on an examination of outcomes in four jurisdictions that differ significantly in the level of accommodation that has emerged: England, Scotland, Ontario, and Quebec. I seek to explain why such variation in outcomes exists among these four cases. I draw on four bodies of literature to underpin the theoretical framework: historical institutionalism, political mobilization by civil society, political parties, and ideationalism. My argument can be summarized simply; historic church-state settlements, unique in each case, are the most important factor explaining the variation in outcomes in England, Scotland, Ontario, and Quebec. In some cases, the historic church-state template is incrementally adapted to accommodate Muslim minorities. In other cases, relatively little accommodation occurs and the path-dependent trajectory of church-state relations remains entrenched. While the historic church-state template is a necessary factor in the explanation, it does not fully account for the variation. For a more complete picture, I demonstrate that there are several additional key factors that also shape the outcomes: first, national identity and public attitudes towards immigration and immigrants; second, the extent of mobilization by political agents, such as civil society organizations and historic churches; and third, the response of political parties to demands by Muslims for institutional accommodation. Ultimately, I conclude that Muslims in these jurisdictions are receiving some accommodation, but the process is slow and partial. This thesis makes important theoretical and empirical contributions to the discussion of Muslim integration in liberal democratic states. First, a framework has yet to be developed that considers the theoretical implications of institutional accommodation of Muslims; I address this gap. Second, this research demonstrates the utility of historical institutionalism in explaining the adaptation of church-state templates to accommodate Muslims’ demands. Last, this study makes an original contribution by comparing the cases of England, Scotland, Ontario, and Quebec in the accommodation of Muslims in education. A comparison of Canada with the United Kingdom has not yet been done.