Analysis of traffic injury severity in a mega city of a developing country

Despite a considerable amount of research on traffic injury severities, relatively little is known about the factors influencing traffic injury severity in developing countries, and in particular in Bangladesh. Road traffic crashes are a common headline in daily newspapers of Bangladesh. It has also recorded one of the highest road fatality rates in the world. This research identifies significant factors contributing to traffic injury severity in Dhaka – a mega city and capital of Bangladesh. Road traffic crash data of 5 years from 2007 to 2011 were collected from the Dhaka Metropolitan Police (DMP), which included about 2714 traffic crashes. The severity level of these crashes was documented in a 4-point ordinal scale: no injury (property damage), minor injury, severe injury, and death. An ordered Probit regression model has been estimated to identify factors contributing to injury severities. Results show that night time influence is associated with a higher level injury severity as is for individuals involved in single vehicle crashes. Crashes on highway sections within the city are found to be more injurious than crashes along the arterial and feeder roads. There is a lower likelihood of injury severity, however, if the road sections are monitored and enforced by the traffic police. The likelihood of injuries is lower on two-way traffic arrangements than one-way, and at four-legged intersections and roundabouts compare to road segments. The findings are compared with those from developed countries and the implications of this research are discussed in terms of policy settings for developing countries.

Neighbourhood disadvantage, individual-level socioeconomic position, and self-reported chronic arthritis : a cross-sectional multilevel study

Objective: To examine the association between individual- and neighborhood-level disadvantage and self-reported arthritis. Methods: We used data from a population-based cross-sectional study conducted in 2007 among 10,757 men and women ages 40–65 years, selected from 200 neighborhoods in Brisbane, Queensland, Australia using a stratified 2-stage cluster design. Data were collected using a mail survey (68.5% response). Neighborhood disadvantage was measured using a census-based composite index, and individual disadvantage was measured using self-reported education, household income, and occupation. Arthritis was indicated by self-report. Data were analyzed using multilevel modeling. Results: The overall rate of self-reported arthritis was 23% (95% confidence interval [95% CI] 22–24). After adjustment for sociodemographic factors, arthritis prevalence was greatest for women (odds ratio [OR] 1.5, 95% CI 1.4–1.7) and in those ages 60–65 years (OR 4.4, 95% CI 3.7–5.2), those with a diploma/associate diploma (OR 1.3, 95% CI 1.1–1.6), those who were permanently unable to work (OR 4.0, 95% CI 3.1–5.3), and those with a household income <$25,999 (OR 2.1, 95% CI 1.7–2.6). Independent of individual-level factors, residents of the most disadvantaged neighborhoods were 42% (OR 1.4, 95% CI 1.2–1.7) more likely than those in the least disadvantaged neighborhoods to self-report arthritis. Cross-level interactions between neighborhood disadvantage and education, occupation, and household income were not significant. Conclusion: Arthritis prevalence is greater in more socially disadvantaged neighborhoods. These are the first multilevel data to examine the relationship between individual- and neighborhood-level disadvantage upon arthritis and have important implications for policy, health promotion, and other intervention strategies designed to reduce the rates of arthritis, indicating that intervention efforts may need to focus on both people and places.

Link discovery for Chinese/English cross-language web information retrieval

Nowadays people heavily rely on the Internet for information and knowledge. Wikipedia is an online multilingual encyclopaedia that contains a very large number of detailed articles covering most written languages. It is often considered to be a treasury of human knowledge. It includes extensive hypertext links between documents of the same language for easy navigation. However, the pages in different languages are rarely cross-linked except for direct equivalent pages on the same subject in different languages. This could pose serious difficulties to users seeking information or knowledge from different lingual sources, or where there is no equivalent page in one language or another. In this thesis, a new information retrieval task—cross-lingual link discovery (CLLD) is proposed to tackle the problem of the lack of cross-lingual anchored links in a knowledge base such as Wikipedia. In contrast to traditional information retrieval tasks, cross language link discovery algorithms actively recommend a set of meaningful anchors in a source document and establish links to documents in an alternative language. In other words, cross-lingual link discovery is a way of automatically finding hypertext links between documents in different languages, which is particularly helpful for knowledge discovery in different language domains. This study is specifically focused on Chinese / English link discovery (C/ELD). Chinese / English link discovery is a special case of cross-lingual link discovery task. It involves tasks including natural language processing (NLP), cross-lingual information retrieval (CLIR) and cross-lingual link discovery. To justify the effectiveness of CLLD, a standard evaluation framework is also proposed. The evaluation framework includes topics, document collections, a gold standard dataset, evaluation metrics, and toolkits for run pooling, link assessment and system evaluation. With the evaluation framework, performance of CLLD approaches and systems can be quantified. This thesis contributes to the research on natural language processing and cross-lingual information retrieval in CLLD: 1) a new simple, but effective Chinese segmentation method, n-gram mutual information, is presented for determining the boundaries of Chinese text; 2) a voting mechanism of name entity translation is demonstrated for achieving a high precision of English / Chinese machine translation; 3) a link mining approach that mines the existing link structure for anchor probabilities achieves encouraging results in suggesting cross-lingual Chinese / English links in Wikipedia. This approach was examined in the experiments for better, automatic generation of cross-lingual links that were carried out as part of the study. The overall major contribution of this thesis is the provision of a standard evaluation framework for cross-lingual link discovery research. It is important in CLLD evaluation to have this framework which helps in benchmarking the performance of various CLLD systems and in identifying good CLLD realisation approaches. The evaluation methods and the evaluation framework described in this thesis have been utilised to quantify the system performance in the NTCIR-9 Crosslink task which is the first information retrieval track of this kind.

Environmental incidents in a developing country and corporate environmental disclosures : a study of a multinational gas company

Purpose – The purpose of this paper is to examine the environmental disclosure initiatives of Niko Resources Ltd – a Canada-based multinational oil and gas company – following the two major environmental blowouts at a gas field in Bangladesh in 2005. As part of the examination, the authors particularly focus on whether Niko's disclosure strategy was associated with public concern pertaining to the blowouts. Design/methodology/approach – The authors reviewed news articles about Niko's environmental incidents in Bangladesh and Niko's communication media, including annual reports, press releases and stand-alone social responsibility report over the period 2004-2007, to understand whether news media attention as proxy for public concern has an impact on Niko's disclosure practices in relation to the affected local community in Bangladesh. Findings – The findings show that Niko did not provide any non-financial environmental information within its annual reports and press releases as a part of its responsibility to the local community which was affected by the blowouts, but it did produce a stand-alone report to address the issue. However, financial environmental disclosures, such as the environmental contingent liability disclosure, were adequately provided through annual reports to meet the regulatory requirements concerning environmental persecutions. The findings also suggest that Niko's non-financial disclosure within a stand-alone report was associated with the public pressures as measured by negative media coverage towards the Niko blowouts. Research limitations/implications – This paper concludes that the motive for Niko's non-financial environmental disclosure, via a stand-alone report, reflected survival considerations: the company's reaction did not suggest any real attempt to hold broader accountability for its activities in a developing country.

Motivations for an organisation within a developing country to report social responsibility information : evidence from Bangladesh

Purpose – The aim of the paper is to describe and explain, using a combination of interviews and content analysis, the social and environmental reporting practices of a major garment export organisation within a developing country. Design/methodology/approach – Senior executives from a major organisation in Bangladesh are interviewed to determine the pressures being exerted on them in terms of their social and environmental performance. The perceptions of pressures are then used to explain – via content analysis – changing social and environmental disclosure practices. Findings – The results show that particular stakeholder groups have, since the early 1990s, placed pressure on the Bangladeshi clothing industry in terms of its social performance. This pressure, which is also directly related to the expectations of the global community, in turn drives the industry's social policies and related disclosure practices. Research limitations/implications – The findings show that, within the context of a developing country, unless we consider the managers' perceptions about the social and environmental expectations being imposed upon them by powerful stakeholder groups then we will be unable to understand organisational disclosure practices. Originality/value – This paper is the first known paper to interview managers from a large organisation in a developing country about changing stakeholder expectations and then link these changing expectations to annual report disclosures across an extended period of analysis.

A picture is worth a thousand words : a cross-curricular approach to learning about visuals in STEM

Visuals are a central feature of STEM in all levels of education and many areas of employment. The wide variety of visuals that students are expected to master in STEM prevents an approach that aims to teach students about every type of visual that they may encounter. This paper proposes a pedagogy that can be applied across year levels and learning areas, allowing a school-wide, cross-curricular, approach to teaching about visual, that enhances learning in STEM and all other learning areas. Visuals are classified into six categories based on their properties, unlike traditional methods that classify visuals according to purpose. As visuals in the same category share common properties, students are able to transfer their knowledge from the familiar to unfamiliar in each category. The paper details the classification and proposes some strategies that can be can be incorporated into existing methods of teaching students about visuals in all learning areas. The approach may also assist students to see the connections between the different learning areas within and outside STEM.

A cross-sectional analysis of patterns of obesity in a cohort of working nurses and midwives in Australia, New Zealand, and the United Kingdom

Objective The aim of this study was to examine the prevalence of overweight and obesity and the association with demographic, reproductive work variables in a representative cohort of working nurses and midwives. Design A cross sectional study of self reported survey data. Settings Australia, New Zealand and the United Kingdom. Methods Measurement outcomes included BMI categories, demographic (age, gender, marital status, ethnicity), reproductive (parity, number of births, mother's age at first birth, birth type and menopausal status) and workforce (registration council, employment type and principal specialty) variables. Participants 4996 respondents to the Nurses and Midwives e-Cohort study who were currently registered and working in nursing or midwifery in Australia (n=3144), New Zealand (n=778) or the United Kingdom (n=1074). Results Amongst the sample 61.87% were outside the healthy weight range and across all three jurisdictions the prevalence of obesity in nurses and midwives exceeded rates in the source populations by 1.73% up to 3.74%. Being overweight or obese was significantly associated with increasing age (35–44 yrs aOR 1.71, 95% CI 1.41–2.08; 45–55 yrs aOR 1.90, 95%CI 1.56–2.31; 55–64 aOR 2.22, 95% CI 1.71–2.88), and male gender (aOR 1.46, 95% CI 1.15–1.87). Primiparous nurses and midwives were more likely to be overweight or obese (aOR 1.37, 95% CI 1.06–1.76) as were those who had reached menopause (aOR 1.37, 95% CI 1.11–1.69). Nurses and midwives in part-time or casual employment had significantly reduced risk of being overweight or obese, (aOR 0.81, 95% CI 0.70–0.94 and aOR 0.75, 95% CI 0.59–0.96 respectively), whilst working in aged carried increased risk (aOR 1.37, 95% CI 1.04–1.80). Conclusion Nurses and midwives in this study have higher prevalence of obesity and overweight than the general population and those who are older, male, or female primiparous and menopausal have significantly higher risk of overweight or obesity as do those working fulltime, or in aged care. The consequences of overweight and obesity in this occupational group may impact on their workforce participation, their management of overweight and obese patients in their care as well as influencing their individual health behaviours and risks of occupational injury and chronic disease.

Learning environments – Laboratories at the cross roads

Laboratories and technical hands on learning have always been a part of Engineering and Science based university courses. They provide the interface where theory meets practice and students may develop professional skills through interacting with real objects in an environment that models appropriate standards and systems. Laboratories in many countries are facing challenges to their sustainable operation and effectiveness. In some countries such as Australia, significantly reduced funding and staff reduction is eroding a once strong base of technical infrastructure. Other countries such as Thailand are seeking to develop their laboratory infrastructure and are in need of staff skill development, management and staff structure in technical areas. In this paper the authors will address the need for technical development with reference to work undertaken in Thailand and Australia. The authors identify the roads which their respective university sectors are on and point out problems and opportunities. It is hoped that the cross roads where we meet will result in better directions for both.

The implications of cross-regional differences for the design of In-vehicle Information Systems : a comparison of Australian and Chinese drivers

The increasing global distribution of automobiles necessitates that the design of In-vehicle Information Systems (IVIS) is appropriate for the regions to which they are being exported. Differences between regions such as culture, environment and traffic context can influence the needs, usability and acceptance of IVIS. This paper describes two studies aimed at identifying regional differences in IVIS design needs and preferences across drivers from Australia and China to determine the impact of any differences on IVIS design. Using a questionnaire and interaction clinics, the influence of cultural values and driving patterns on drivers' preferences for, and comprehension of, surface- and interaction-level aspects of IVIS interfaces was explored. Similarities and differences were found between the two regional groups in terms of preferences for IVIS input control types and labels and in the comprehension of IVIS functions. Specifically, Chinese drivers preferred symbols and Chinese characters over English words and were less successful (compared to Australians) at comprehending English abbreviations, particularly for complex IVIS functions. Implications in terms of the current trend to introduce Western-styled interfaces into other regions with little or no adaptation are discussed.

Cross-calbration of push-broom 2D LIDARs and cameras in natural scenes

This paper addresses the problem of automatically estimating the relative pose between a push-broom LIDAR and a camera without the need for artificial calibration targets or other human intervention. Further we do not require the sensors to have an overlapping field of view, it is enough that they observe the same scene but at different times from a moving platform. Matching between sensor modalities is achieved without feature extraction. We present results from field trials which suggest that this new approach achieves an extrinsic calibration accuracy of millimeters in translation and deci-degrees in rotation.

Conflict and communication among engineers

The trend of cultural diversity is increasing in all organizations, especially engineering ones, due to globalization, mergers, joint ventures and the movement of the workforce. The collaborative nature of projects in engineering industries requires long-term teamwork between local and international engineers. Research confirms a specific culture among engineering companies that isassumed to have a negative effect on collaboration and communication among co-workers. Multicultural workplaces have been reported as challenging environments in the engineering work culture, which calls for more research among engineering organizations. An everyday challenge for co-workers, especially in culturally diverse contexts, is handling interpersonal conflict. This perceived conflict among individuals can happen because of actual differences in tasks or relationships. Research demonstrates that task conflict at the group level has some positive effects on decision-making and innovation, while it has negative effects on employees’ work attitude and performance. However, relationship conflict at the individual level has only negative effects including frustration, tension, low job satisfaction, high employee turnover and low productivity. Outcomes of both task and relationship conflict at individual level can have long-term negative consequences like damaged organizational commitment. One of the most important sources of differences between individuals, which results in conflict, is their cultural backgrounds. First, this thesis suggests that in culturally diverse workplaces, people perceive more relationship conflict than task conflict. Second, this thesis examines interpersonal communication in culturally diverse work places. Communicating effectively in culturally diverse workplaces is crucial for today’s business. Culture has a large effect on the ways that people communicate with each other. Ineffective communication can escalate interpersonal conflict and cause frustration in the long term. Communication satisfaction, defined as enjoying the communication and feeling that the communication was appropriate and effective, has a positive effect on individuals’ psychological wellbeing. In a culturally diverse workplace, it is assumed that individuals feel less satisfied with their interpersonal communications because of their lack of knowledge about other cultures’ communication norms. To manage interpersonal interactions, many authors suggest that individuals need a specific capability, i.e., cultural intelligence (some studies use cultural competence, global intelligence or intercultural competence interchangeably). Some authors argue that cultures are synergic and convergent and the postmodernist definition of culture is just our dominant beliefs. However, other authors suggest that cultural intelligence is the strongest and most comprehensive competency for managing cross-cultural interactions, because various cultures differ so greatly at the micro level. This thesis argues that individuals with a high level of cultural intelligence perceive less interpersonal conflict and more satisfaction with their interpersonal communication. Third, this thesis also looks at individuals' perception of cultural diversity. It is suggested that level of cultural diversity plays a moderating role on all of the proposed relationships (effect of cultural intelligence on perception of relationship conflict/ communication satisfaction) This thesis examines the relationship among cultural diversity, cultural intelligence, interpersonal conflict and communication by surveying eleven companies in the oil and gas industry. The multicultural nature of companies within the oil and gas industry and the characteristics of engineering culture call for more in-depth research on interpersonal interactions. A total of 286 invitation emails were sent and 118 respondents replied to the survey, giving a 41.26 per cent response rate. All the respondents were engineers, engineering managers or practical technicians. The average age of the participants was 36.93 years and 58.82 per cent were male. Overall, 47.6 per cent of the respondents had at least a master’s degree. Totally, 42.85 per cent of the respondents were working in a country that was not their country of birth. The overall findings reveal that cultural diversity and cultural intelligence significantly influence interpersonal conflict and communication satisfaction. Further, this thesis also finds that cultural intelligence is an effective competency for dealing with the perception of interpersonal relationship conflict and communication satisfaction when the level of cultural diversity is moderate to high. This thesis suggests that cultural intelligence training is necessary to increase the level of this competency among employees in order to help them to have better understanding of other cultures. Human resource management can design these training courses with consideration for the level of cultural diversity within the organization.

Genetic improvement of giant freshwater prawn in Vietnam

The giant freshwater prawn (Macrobrachium rosenbergii) or GFP is one of the most important freshwater crustacean species in the inland aquaculture sector of many tropical and subtropical countries. Since the 1990’s, there has been rapid global expansion of freshwater prawn farming, especially in Asian countries, with an average annual rate of increase of 48% between 1999 and 2001 (New, 2005). In Vietnam, GFP is cultured in a variety of culture systems, typically in integrated or rotational rice-prawn culture (Phuong et al., 2006) and has become one of the most common farmed aquatic species in the country, due to its ability to grow rapidly and to attract high market price and high demand. Despite potential for expanded production, sustainability of freshwater prawn farming in the region is currently threatened by low production efficiency and vulnerability of farmed stocks to disease. Commercial large scale and small scale GFP farms in Vietnam have experienced relatively low stock productivity, large size and weight variation, a low proportion of edible meat (large head to body ratio), scarcity of good quality seed stock. The current situation highlights the need for a systematic stock improvement program for GFP in Vietnam aimed at improving economically important traits in this species. This study reports on the breeding program for fast growth employing combined (between and within) family selection in giant freshwater prawn in Vietnam. The base population was synthesized using a complete diallel cross including 9 crosses from two local stocks (DN and MK strains) and a third exotic stock (Malaysian strain - MY). In the next three selection generations, matings were conducted between genetically unrelated brood stock to produce full-sib and (paternal) half-sib families. All families were produced and reared separately until juveniles in each family were tagged as a batch using visible implant elastomer (VIE) at a body size of approximately 2 g. After tags were verified, 60 to 120 juveniles chosen randomly from each family were released into two common earthen ponds of 3,500 m2 pond for a grow-out period of 16 to 18 weeks. Selection applied at harvest on body weight was a combined (between and within) family selection approach. 81, 89, 96 and 114 families were produced for the Selection line in the F0, F1, F2 and F3 generations, respectively. In addition to the Selection line, 17 to 42 families were produced for the Control group in each generation. Results reported here are based on a data set consisting of 18,387 body and 1,730 carcass records, as well as full pedigree information collected over four generations. Variance and covariance components were estimated by restricted maximum likelihood fitting a multi-trait animal model. Experiments assessed performance of VIE tags in juvenile GFP of different size classes and individuals tagged with different numbers of tags showed that juvenile GFP at 2 g were of suitable size for VIE tags with no negative effects evident on growth or survival. Tag retention rates were above 97.8% and tag readability rates were 100% with a correct assignment rate of 95% through to mature animal size of up to 170 g. Across generations, estimates of heritability for body traits (body weight, body length, cephalothorax length, abdominal length, cephalothorax width and abdominal width) and carcass weight traits (abdominal weight, skeleton-off weight and telson-off weight) were moderate and ranged from 0.14 to 0.19 and 0.17 to 0.21, respectively. Body trait heritabilities estimated for females were significantly higher than for males whereas carcass weight trait heritabilities estimated for females and males were not significantly different (P > 0.05). Maternal and common environmental effects for body traits accounted for 4 to 5% of the total variance and were greater in females (7 to 10%) than in males (4 to 5%). Genetic correlations among body traits were generally high in both sexes. Genetic correlations between body and carcass weight traits were also high in the mixed sexes. Average selection response (% per generation) for body weight (transformed to square root) estimated as the difference between the Selection and the Control group was 7.4% calculated from least squares means (LSMs), 7.0% from estimated breeding values (EBVs) and 4.4% calculated from EBVs between two consecutive generations. Favourable correlated selection responses (estimated from LSMs) were detected for other body traits (12.1%, 14.5%, 10.4%, 15.5% and 13.3% for body length, cephalothorax length, abdominal length, cephalothorax width and abdominal width, respectively) over three selection generations. Data in the second selection generation showed positive correlated responses for carcass weight traits (8.8%, 8.6% and 8.8% for abdominal weight, skeleton-off weight and telson-off weight, respectively). Data in the third selection generation showed that heritability for body traits were moderate and ranged from 0.06 to 0.11 and 0.11 to 0.22 at weeks 10 and 18, respectively. Body trait heritabilities estimated at week 10 were not significantly lower than at week 18. Genetic correlations between body traits within age and genetic correlations for body traits between ages were generally high. Overall our results suggest that growth rate responds well to the application of family selection and carcass weight traits can also be improved in parallel, using this approach. Moreover, selection for high growth rate in GFP can be undertaken successfully before full market size has been reached. The outcome of this study was production of an improved culture strain of GFP for the Vietnamese culture industry that will be trialed in real farm production environments to confirm the genetic gains identified in the experimental stock improvement program.

Cross-layer design and optimization for wireless networked control systems

Wireless networked control systems (WNCSs) have been widely used in the areas of manufacturing and industrial processing over the last few years. They provide real-time control with a unique characteristic: periodic traffic. These systems have a time-critical requirement. Due to current wireless mechanisms, the WNCS performance suffers from long time-varying delays, packet dropout, and inefficient channel utilization. Current wirelessly networked applications like WNCSs are designed upon the layered architecture basis. The features of this layered architecture constrain the performance of these demanding applications. Numerous efforts have attempted to use cross-layer design (CLD) approaches to improve the performance of various networked applications. However, the existing research rarely considers large-scale networks and congestion network conditions in WNCSs. In addition, there is a lack of discussions on how to apply CLD approaches in WNCSs. This thesis proposes a cross-layer design methodology to address the issues of periodic traffic timeliness, as well as to promote the efficiency of channel utilization in WNCSs. The design of the proposed CLD is highlighted by the measurement of the underlying network condition, the classification of the network state, and the adjustment of sampling period between sensors and controllers. This period adjustment is able to maintain the minimally allowable sampling period, and also maximize the control performance. Extensive simulations are conducted using the network simulator NS-2 to evaluate the performance of the proposed CLD. The comparative studies involve two aspects of communications, with and without using the proposed CLD, respectively. The results show that the proposed CLD is capable of fulfilling the timeliness requirement under congested network conditions, and is also able to improve the channel utilization efficiency and the proportion of effective data in WNCSs.