Degradação de compostos orgânicos voláteis usando o catalisador SBA-15 contendo titânio

The groundwater pollution arising due to fuel leaks gas stations has presented a problem aggravating. Increasingly studies related to environmental problems such accidents and seek to propose some solutions for the treatment of groundwater and soils that are contaminated by gasoline. This study evaluated the use of molecular sieve TiSBA-15 as a catalyst for the reaction of removing of volatile organic compounds, particularly benzene, toluene, ethylbenzene and xylenes, known as BTEX, one of the main pollutants found in groundwater. The catalyst was synthesized by the method post-synthesis techniques and characterized by XSD, TG/DTG, adsorption/desorption of N2, XRF-EDX, for checking the incorporation of titanium and formation of the structure of the catalyst. The reaction occurred with the presence of hydrogen peroxide, H2O2, in aqueous medium to form hydroxyl radicals, which are needed in the process of removal of BTEX compounds. The catalytic reaction was carried out for 5 hours at 60 °C, pH to 3.0, and analyzes of the compounds were made in a gas chromatograph with a flame detection means photoionization static headspace (HS-GC-PID). The catalytic tests have shown the efficacy of using this type of catalyst for the removal of these volatile organic compounds, having a removal rate of 90.60% in the range where the catalyst was studied TiSBA-15(5,0)

Extração e análise da fração lipídica da microalga monoraphidium sp., síntese e caracterização do seu biodiesel

The cultivation of microalgae biomass in order to produce biodiesel arises as an extremely promising aspect, in that the microalgae culture includes short cycle of reproduction, smaller areas for planting and residual biomass rich in protein content. The present dissertation evaluates the performance and features, through spectrometry in the region of infrared with transformed Fourier (FTIR) and spectrometry in the region of UVvisible (UV-Vis), of the extracted lipid material (LM) using different techniques of cell wall disruption (mechanical agitation at low and at high spin and agitation associated with cavitation). The technique of gas chromatography (GC) brought to light the success of alkaline transesterification in the conversion of oil into methyl monoesters (MME), which was also analyzed by spectroscopic techniques (FTIR, proton magnetic resonance (1H NMR) and carbon (13C NMR). Through thermogravimetric analysis (TGA) were analyzed the lipid material (LM), biodiesel and the microalgae biomass. The method which provided the best results concerning the efficiency in extraction of the LP of Monoraphidium sp. (12,51%) was by mechanical agitation at high spin (14 000 rpm), for 2 hours being the ideal time, as shown by the t test. The spectroscopic techniques (1H NMR, 13C NMR and FTIR) confirmed that the structure of methyl monoesters and the chromatographic data (CG) revealed a high content of saturated fatty acid esters (about 70%) being the major constituent eicosanoic acid (33,7%), which justifies the high thermal stability of microalgae biodiesel. The TGA also ratified the conversion rate (96%) of LM into MME, pointing out the quantitative results compatible with the values obtained through GC (about 98%) and confirmed the efficiency of the extraction methods used, showing that may be a good technique to confirm the extraction of these materials. The content of LM microalgae obtained (12,51%) indicates good potential for using such material as a raw material for biodiesel production, when compared to oil content which can be obtained from traditional oil for this use, since the productivity of microalgae per hectare is much larger and requires an extremely reduced period to renew its cultivation

Obtenção de diesel verde por craqueamento termocatalítico de óleo de buriti (Mauritia flexuosa L.) sobre materiais nanoestruturados do tipo LaSBA-15

In order to obtain a biofuel similar to mineral diesel, lanthanum-incorporated SBA- 15 nanostructured materials, LaSBA-15(pH), with different Si/La molar ratios (75, 50, 25), were synthesized in a two-steps hydrothermal procedure, with pH-adjusting of the synthesis gel at 6, and were used like catalytic solids in the buriti oil thermal catalytic cracking. These solids were characterized by X-ray fluorescence (XRF), powder X-ray diffraction (XRD), thermogravimetric analysis (TG/DTG), infrared spectroscopy (FTIR), nitrogen porosimetry and ethanol dehydration, aiming to active sites identify. Taken together, the analyses indicated that the synthesis method has employed to obtain materials highly ordered mesostructures with large average pore sizes and high surface area, besides suggested that the lanthanum was incorporated in the SBA-15 both into the framework as well as within the mesopores. Catalytic dehydration of ethanol over the LaSBA-15(pH) products has shown that they have weak Lewis acid and basic functionalities, indicative of the presence of lanthanum oxide in these samples, especially on the La75SBA-15(pH) sample, which has presented the highest selectivity to ethylene. The buriti oil thermal and thermal catalytic cracking, realized from the room temperature to 450 ºC in a simple distillation system, has allowed obtaining two liquid fractions, each consisting of two phases, one aqueous and another organic, organic liquid (OL). The OL obtained from first fractions has shown high acid index, even in the thermal catalytic process. One the other hand, OL coming from second ones, called green diesel (GD), have presented low acid index, particularly that one obtained from the thermal catalytic process realized over LaSBA-15(pH) samples. The acid sites presence in these samples, associated to their large average pore sizes and high surface areas, have allowed them, especially the La75SBA-15(pH), to present deoxygenating activity in the buriti oil thermal catalytic cracking, providing an oxygenates content reduction, particularly carboxylic acids, in the GD. Furthermore, the GD comes from the second liquid fraction obtained in the buriti oil thermal catalytic cracking over this latest solid sample has shown hydrocarbons composition and physic-chemical properties similar to that mineral diesel, beyond sulfur content low

Síntese, caracterizaçao e propriedades catalicas da peneira molecular nanoestruturada modificada com lantanio

The nanostructured molecular sieve SBA-15 was synthesized by the hydrothermal method, and modified with lanthanum with Si/La molar ratios of 25, 50, 75 and 100. The materials were evaluated as catalysts for the cracking of n-hexane model reaction. Type SBA- 15 and LaSBA-15 mesoporous materials were synthesized using tetraetilortosilicato as a source of silica, hydrochloric acid, heptahydrate lanthanum chloride and distilled water. Pluronic P123 triblock. polymer was used as structure template. The syntheses were carried out by 72 hours. The obtained SBA-15 samples were previously analyzed by thermogravimetry, in order to check the conditions of calcination for removal of organic template. Then, the calcined materials were characterized by X-ray diffraction, infrared spectroscopy, adsorption and desorption of nitrogen, scanning electron microscopy and X-ray microanalysis by dispersive energy. The acidity of the samples was determined using adsorption of n-bulinamina and desorption followed by thermogravimetry. It was found that the hydrothermal synthesis method was suitable for the synthesis of the SBA-15 mesoporous materials, with an excellent degree of hexagonal ordering. The reactions of catalytic cracking of n-hexane were carried out using a fixed bed continuous flow microreactor, coupled on-line to a gas chromatograph. From the catalytic evaluation, it was observed that the mesoporous materials containing lanthanum showed different results for the reaction of cracking of nhexane compared to the unmodified mesoporous material SBA-15. As a result of cracking was obtained as main products hydrocarbons in the range of C1 to C5. The catalyst that showed better properties in relation to the acidity and catalytic activity was LaSBA-15 with the ratio Si/La = 50

Avaliação oxidativa do biodiesel de pinhão manso em diferentes processos de purificação

The objective of this study was to analyze the oxidative stability of biodiesel from jatropha obtained from different purification processes, three wet processes with different drying (in a vacuum oven, conventional oven and in anhydrous sodium sulfate) and dry (purification with magnesium silicate adsorbent). Raw materials of different qualities (jatropha crop ancient and recent crop) were used. The Jatropha oil was extracted by mechanical extraction and refined. The Jatropha biodiesel was obtained by the transesterification reaction in ethyl route using alkaline catalysis. The biodiesel samples were characterized by analysis of water content, carbon residue, Absorption Spectroscopy in the Infrared Region and Thermogravimetry. Thermogravimetric curves of purified PUsv* PUsq* and had higher initial decomposition temperatures, indicating that the most stable, followed by samples PU* and PUSC*. Besides the sample SP* is a smaller initial temperature, confirming the sample without purification to be less thermally stable. The percentage mass loss of the purified samples showed conversion of about 98.5%. The results of analyzes carbon residue and infrared suggested that contamination by impurities is the main factor for decreased oxidative stability of biodiesel. The oxidative stability was assessed from periodic monitoring, using the techniques of Rancimat, peroxide index, acid value and Pressurized Differential Scanning Calorimetry. Samples of biodiesel from jatropha which showed better oxidative stability were of the best quality raw material and wet scrubbing: PUsq* with dry chemical, using anhydrous sodium sulfate and PUsv* with vacuum drying, which had oxidative stability 6 hours in Rancimat time 0 days, within the limits established by the Technical Regulation No. 4/2012 of the ANP, without the addition of antioxidant, suggesting that these procedures the least influence on the oxidative stability of biodiesel

Craqueamento térmico e termocatalítico do óleo de girassol (Hellianthus annus L.) sobre materiais micro e mesoporosos

Microporous materials zeolite type Beta and mesoporous type MCM-41 and AlMCM-41 were synthesized hydrothermally and characterized by methods of X-ray diffraction, Fourier transform infrared, scanning electron microscopy, surface acidity, nitrogen adsorption, thermal analysis TG / DTG. Also we performed a kinetic study of sunflower oil on micro and mesoporous catalysts. The microporous material zeolite beta showed a lower crystallinity due to the existence of smaller crystals and a larger number of structural defects. As for the mesoporous materials MCM-41 and AlMCM-41 samples showed formation of hexagonal one-dimensional structure. The study of kinetic behavior of sunflower oil with zeolite beta catalysts, AlMCM-41 and MCM-41 showed a lower activation energy in front of the energy of pure sunflower oil, mainly zeolite beta. In the thermal cracking and thermocatalytic of sunflower oil were obtained two liquid fractions containing an aqueous phase and another organic - organic liquid fraction (FLO). The FLO first collected in both the thermal cracking as the thermocatalytic, showed very high level of acidity, performed characterizations of physicochemical properties of the second fraction in accordance with the specifications of the ANP. The second FLO thermocatalytic collected in cracking of sunflower oil presented results in the range of diesel oil, introducing himself as a promising alternative for use as biofuel liquid similar to diesel, either instead or mixed with it

Reciclagem química de Polietileno utilizando Sílica Mesoporosa tipo SBA-15 avalizada por Termogravimetriae Espectrometria de Massas

The chemical recycling of polyolefins has been the focus of increasing attention owing potential application as a fuel and as source chemicals. The use of plastic waste contributes to the solution of pollution problems.The use of catalysts can enhance the thermal degradation of synthetic polymers, which may be avaliated by Themogravimetry (TG) and mass spectrometry (MS) combined techniques. This work aims to propose alternatives to the chemistry recycling of low-density polyethylene (LDPE) on mesoporous silica type SBA-15 and AlSBA-15.The mesoporous materials type SBA-15 and AlSBA-15 were synthesized through the hydrothermal method starting from TEOS, pseudobohemite, cloridric acid HCl and water. As structure template was used Pluronic P123. The syntheses were accomplished during the period of three days. The best calcination conditions for removal of the organic template (P123) were optimized by thermal analysis (TG/DTG) and through analyses of Xray diffraction (XRD), infrared spectroscopy (FT-IR), nitrogen adsorption and scanning electron microscopy (SEM) was verified that as much the hydrothermal synthesis method as the calcination by TG were promising for the production of mesoporous materials with high degree of hexagonal ordination. The general analysis of the method of Analog Scan was performed at 10oC/min to 500 oC to avoid deterioration of capillary with very high temperatures. Thus, with the results, we observed signs mass/charge more evident and, using the MID method, was obtained curve of evolution of these signals. The addition of catalysis produced a decrease in temperature of polymer degradation proportional to the acidity of the catalyst. The results showed that the mesoporous materials contributed to the formation of compounds of lower molecular weight and higher value in the process of catalytic degradation of LDPE, representing an alternative to chemical recycling of solid waste

Eficiência mastigatória e impacto da saúde oral na qualidade de vida em pacientes reabilitados com próteses totais removíveis implanto-suportadas

Edentulous patients with complaint about mandibular conventional denture might experience poor masticatory function and negative impact of oral health on quality of life. The aim of this controlled clinical trial was to evaluate the effect of mandibular overdenture on oral health-related quality of life and masticatory efficacy in patients wearing mandibular complete dentures. The edentulous patients (n=16) were rehabilitated with new maxillary and mandibular complete dentures and, after 3 months, mandibular overdentures retained by 2 implants (bar-clip system) were fabricated. The Brazilian version of OHIP-Edent questionnaire was used to assess the oral healthrelated quality of life. Masticatory efficacy was evaluated through a colorimetric method with chewing capsules. The mean OHIP-Edent score was 8.5 with conventional dentures and 2.0 with mandibular overdenture, which means a positive impact of oral health on quality of life with overdentures (p=0.001). The mean absorbance for masticatory efficacy was 0.025 for conventional dentures and 0.073 for overdentures. There was statistically significant difference for masticatory efficacy before and after implants rehabilitation (p=0.003). However, there was no correlation between masticatory efficacy and OHIP (p>0.05). So, mandibular overdenture retained by 2 implants improved the quality of life and masticatory efficacy of edentulous patients with complaint about mandibular conventional complete dentures

Uma nova forma de calcular os centros dos Clusters em algoritmos de agrupamento tipo fuzzy c-means

Clustering data is a very important task in data mining, image processing and pattern recognition problems. One of the most popular clustering algorithms is the Fuzzy C-Means (FCM). This thesis proposes to implement a new way of calculating the cluster centers in the procedure of FCM algorithm which are called ckMeans, and in some variants of FCM, in particular, here we apply it for those variants that use other distances. The goal of this change is to reduce the number of iterations and processing time of these algorithms without affecting the quality of the partition, or even to improve the number of correct classifications in some cases. Also, we developed an algorithm based on ckMeans to manipulate interval data considering interval membership degrees. This algorithm allows the representation of data without converting interval data into punctual ones, as it happens to other extensions of FCM that deal with interval data. In order to validate the proposed methodologies it was made a comparison between a clustering for ckMeans, K-Means and FCM algorithms (since the algorithm proposed in this paper to calculate the centers is similar to the K-Means) considering three different distances. We used several known databases. In this case, the results of Interval ckMeans were compared with the results of other clustering algorithms when applied to an interval database with minimum and maximum temperature of the month for a given year, referring to 37 cities distributed across continents

Nomeação rápida, leitura e compreensão em escolares com dificuldades de aprendizagem

OBJETIVO: Comparar e correlacionar o desempenho em nomeação rápida, leitura e compreensão de escolares com dificuldades de aprendizagem. MÉTODOS: Participaram deste estudo 32 escolares da 4ª série do ensino fundamental, de ambos os gêneros, com faixa etária entre 11 anos e 4 meses e 12 anos e 7 meses. Foram realizadas a primeira e a segunda tomada de leitura oral de um texto, selecionado a partir da indicação dos professores da 4ª série; a primeira e a segunda tomada de compreensão por meio de quatro perguntas apresentadas sequencialmente ao texto, em que os escolares deveriam responder oralmente; e a prova de nomeação rápida do Teste de Desempenho Cognitivo-Linguístico, versão individual. RESULTADOS: Houve diferença entre a primeira e a segunda compreensão e entre nomeação rápida, primeira e segunda leitura. Houve forte correlação entre compreensão e leitura, sugerindo que o desempenho na primeira tomada de leitura influenciou de forma significativa o desempenho na segunda tomada de leitura; o mesmo ocorreu para a compreensão. CONCLUSÃO: A defasagem na realização das atividades de nomeação, leitura e compreensão na primeira avaliação ocasionou falhas no mecanismo de conversão fonema-grafema que podem ser suficientes para desencadear dificuldades na aprendizagem da leitura.

Desempenho de escolares com e sem dificuldades de aprendizagem de ensino particular em habilidade fonológica, nomeação rápida, leitura e escrita

OBJETIVOS: caracterizar e comparar o desempenho de escolares com e sem dificuldades de aprendizagem no ensino particular em habilidades fonológicas, nomeação rápida, leitura e escrita. MÉTODOS: participaram desse estudo 60 escolares de 2ª a 4ª séries de escola de ensino particular, distribuídos em 6 grupos, sendo cada grupo composto por 10 escolares, sendo 3 grupos de escolares com dificuldades de aprendizagem e 3 grupos de escolares sem dificuldades de aprendizagem. Como procedimentos, foram realizadas a prova de nomeação automática rápida, a de consciência fonológica e a prova de leitura oral e escrita sob ditado. RESULTADOS: os resultados desse estudo evidenciaram desempenho superior dos escolares sem dificuldades de aprendizagem em relação àqueles com dificuldades. Os escolares com dificuldades de aprendizagem apresentaram maior relação velocidade/tempo em tarefas de nomeação e, conseqüentemente, desempenho inferior em tarefas de consciência fonológica e leitura e escrita de palavras isoladas quando comparados aos sem dificuldades de aprendizagem. CONCLUSÃO: os escolares com dificuldades de aprendizagem apresentaram comprometimento na relação entre as capacidades de nomeação e automatização dos estímulos apresentados com a capacidade de acesso lexical, discriminação visual, freqüência de uso dos estímulos e competição para a apresentação do menor tempo possível na nomeação dos códigos necessários para o estabelecimento do mecanismo de conversão fonema-grafema, exigido para a realização da leitura e escrita em um sistema alfabético como o português.

Treinamento de habilidades fonológicas e correspondência grafema-fonema em crianças de risco para dislexia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Monitor de profundidade da hipnose. A eletroencefalografia bispectral

JUSTIFICATIVA E OBJETIVOS: A monitorização da profundidade da hipnose e da anestesia é um ato complexo. A maioria das propostas para monitorizar os níveis adequados da hipnose, durante a anestesia, envolve o EEG usando as ondas do EEG, ou mais recentemente, usando a forma processada. A análise bispectral é o método que permite analisar o EEG nas diferentes fases de freqüências. CONTEÚDO: O EEG processado é iniciado com a conversão do sinal de EEG para a forma digital. O EEG digitalizado pode ser matematicamente transformado pelo processo conhecido como análise de Fourier, que separa o complexo sinal do EEG em vários componentes da onda, ou seja, em cada porção de diferente amplitude, mas cuja soma corresponde à forma original da onda. Com o emprego deste método surgem vários parâmetros. O Índice Bispectral, ou simplesmente BIS (100 - acordado até 0 - isoelétrico), é derivado dos melhores parâmetros (p.ex.: freqüência da borda spectral, freqüência mediana e o burst supression ou surto de supressão) que foram avaliados através de análise estatística. CONCLUSÕES: A experiência clínica tem mostrado que o BIS pode predizer uma resposta à incisão da pele durante a anestesia. Entretanto, o BIS não é independente da técnica anestésica usada. Há diferentes respostas, a depender do hipnótico e analgésico empregado.

Insuficiência cardíaca com fração de ejeção normal

A insuficiência cardíaca com fração de ejeção normal (ICFEN) é uma síndrome complexa que vem sendo largamente estudada, desde a última década. É causada por disfunção ventricular diastólica evidenciada por métodos complementares, como estudo hemodinâmico ou ecocardiograma, na presença de fração de ejeção preservada. Acomete preferencialmente indivíduos mais idosos e com comorbidades, como hipertensão arterial sistêmica, insuficiência coronariana e obesidade. Os mecanismos fisiopatológicos são complexos e multifatoriais, envolvendo a rigidez passiva do miocárdio, a geometria ventricular, a força de contenção do pericárdio e a interação entre os ventrículos. Os objetivos principais do tratamento são reduzir a congestão venosa pulmonar, a frequência cardíaca e controlar as comorbidades. Ainda não há evidências fortes de que o uso de medicações específicas, como inibidores de enzima de conversão ou betabloqueadores, interfiram na mortalidade. Os fatores de pior prognóstico incluem a idade avançada, presença de disfunção renal, diabete, classe funcional III e IV (NYHA) e estágio avançado de disfunção diastólica, com padrão restritivo ao enchimento ventricular. Outro aspecto que vem ganhando espaço na literatura é o questionamento do papel da disfunção sistólica nos quadros de ICFEN. Todos esses aspectos são abordados detalhadamente na presente revisão.

Sustentabilidade ambiental do cultivo intensivo de Tilápias (Oreochromis niloticus) em tanques-rede e a capacidade de suporte de quatro reservatórios em uma região semi-árida tropical

Intensive production of tilápias, in cages or net tanks, has been proposed as an alternative to increase fish production, that would generate income and offer animal protein in different tropical and subtropical countries. However, this system of production enriches the aquatic environment with nutrients, principally nitrogen and phosphor derived from the dejections of the metabolism of food and eventual food surpluses consumed by the fishes; the alimentation of the fishes in this production modality is dependent on fish food. The emission of these nutritions in levels above the limit that the system is capable metabolize can provoke a phenomenon called eutrofization, putting in risk the quality of water for public and for fish production activities. In this context the work had as a goal to evaluate the trófico state of the four reservoirs for intensive production of tilapias in net-tanks, in other words, he maximum fish production that the reservoirs are able to hold, keeping the desired quantity of nutrient concentrations in water for public use. The results of the four ecosystems in the Boqueirão de Parelhas reservoir showed that it s possible to have an intensive production of tilapias in net tanks, in this environment the annual average concentration of phosphor, was below the considered critical limits to deflagrate the process of eutrofization in semi-arid regions. The carrying capacity of the Boqueirão de Parelhas reservoir depends on the conversion of the feeding facts and phosphor content in the food but it should vary between 100 and 300 tons per year over a variation in the conversion feeding factor of 1,7 to 2,0:1 and a variation in the P in the food of 0,7 to 0,9%