Formation of a direct arterial blood supply to the anterior pituitary gland following complete or partial interruption of the hypophyseal portal vessels

If regions of the anterior pituitary gland received systemic blood via a direct arterial blood supply these regions would escape hypothalamic regulation and thus be a sequela in endocrine disorders. Since, in the untreated rat, all of the blood supply to the anterior pituitary gland is via the hypophyseal portal vessels, we hypothesized that partial interruption of the portal vessels could provoke the establishment of a direct arterial blood supply (arteriogenesis). We utilized the injection of polystyrene microspheres (15 or 9 micron diameter) into the left ventricle of the heart to test this hypothesis. Microspheres are trapped in the first capillary plexus they reach since they are too large to traverse the capillaries. No microspheres reached the anterior pituitary gland of control rats, a finding consistent with the fact that the anterior pituitary gland receives all of its blood supply via the hypophyseal portal blood vessels. Microspheres were observed in the primary portal capillary plexus in the infundibulum (median eminence), infundibular stalk (pituitary stalk), and infundibular process (pars nervosa), the first capillary plexus which they reached. A lesion of the medial basal hypothalamus (MBH) which destroyed the long portal vessels did not result in arteriogenesis since few, if any, microspheres were observed in the anterior pituitary gland. We confirmed, using vascular casts, that these lesions resulted in the long-term destruction of the primary portal capillaries in the infundibulum and of the long portal vessels. In MBH-lesioned animals it appears that all of the blood supply of the anterior pituitary gland is via short portal vessels arising from the infundibular stem and process.(ABSTRACT TRUNCATED AT 250 WORDS)

Six of 12 Relapsed or Refractory Indolent Lymphoma Patients Treated 10 Years Ago with 131I-Tositumomab Remain in Complete Remission.

The purpose of our study was to update the safety and efficacy results of radioimmunotherapy in relapsed or resistant indolent or transformed non-Hodgkin lymphoma. Methods: More than 9 y ago, we treated 12 indolent and 4 transformed, relapsed or refractory lymphoma patients with a single administration of nonmyeloablative therapy with tositumomab and I-131-tositumomab. The 16 patients had a mean of 3.1 (range, 1-6) previous chemotherapy and antibody treatments. Results: Six of 12 relapsed indolent lymphoma patients remain disease-free a mean of 9.8 y (range, 8.6-10.7 y) after radioimmunotherapy. Three of 4 transformed lymphoma patients progressed after radioimmunotherapy, and 1 patient had a partial response of 10 mo. Conclusion: Optimal patient benefit might be obtained in indolent lymphoma when administering radioimmunotherapy up-front in combination with chemotherapy and rituximab treatment. However, these results show that radioimmunotherapy alone achieved long-lasting remissions in 6 of 12 (50%) indolent lymphoma patients in relapse after 1 or multiple chemotherapies.

Design, synthesis, and biological and crystallographic evaluation of novel inhibitors of Plasmodium falciparum enoyl-ACP-reductase (PfFabI).

Malaria, a disease of worldwide significance, is responsible for over one million deaths annually. The liver-stage of Plasmodium's life cycle is the first, obligatory, but clinically silent step in malaria infection. The P. falciparum type II fatty acid biosynthesis pathway (PfFAS-II) has been found to be essential for complete liver-stage development and has been regarded as a potential antimalarial target for the development of drugs for malaria prophylaxis and liver-stage eradication. In this paper, new coumarin-based triclosan analogues are reported and their biological profile is explored in terms of inhibitory potency against enzymes of the PfFAS-II pathway. Among the tested compounds, 7 and 8 showed the highest inhibitory potency against Pf enoyl-ACP-reductase (PfFabI), followed by 15 and 3. Finally, we determined the crystal structures of compounds 7 and 11 in complex with PfFabI to identify their mode of binding and to confirm outcomes of docking simulations.

Prediction of direct and indirect genetic gains and genotypic correlations in rubber tree progenies

The objective of this work was to estimate the genetic parameters, genotypic and phenotypic correlations, and direct and indirect genetic gains among and within rubber tree (Hevea brasiliensis) progenies. The experiment was set up at the Municipality of Jaú, SP, Brazil. A randomized complete block design was used, with 22 treatments (progenies), 6 replicates, and 10 plants per plot at a spacing of 3x3 m. Three‑year‑old progenies were assessed for girth, rubber yield, and bark thickness by direct and indirect gains and genotypic correlations. The number of latex vessel rings showed the best correlations, correlating positively and significantly with girth and bark thickness. Selection gains among progenies were greater than within progeny for all the variables analyzed. Total gains obtained were high, especially for girth increase and rubber yield, which were 93.38 and 105.95%, respectively. Young progeny selection can maximize the expected genetic gains, reducing the rubber tree selection cycle.

A spatially explicit life cycle inventory of the global textile chain

Life cycle analyses (LCA) approaches require adaptation to reflect the increasing delocalization of production to emerging countries. This work addresses this challenge by establishing a country-level, spatially explicit life cycle inventory (LCI). This study comprises three separate dimensions. The first dimension is spatial: processes and emissions are allocated to the country in which they take place and modeled to take into account local factors. Emerging economies China and India are the location of production, the consumption occurs in Germany, an Organisation for Economic Cooperation and Development country. The second dimension is the product level: we consider two distinct textile garments, a cotton T-shirt and a polyester jacket, in order to highlight potential differences in the production and use phases. The third dimension is the inventory composition: we track CO2, SO2, NO (x), and particulates, four major atmospheric pollutants, as well as energy use. This third dimension enriches the analysis of the spatial differentiation (first dimension) and distinct products (second dimension). We describe the textile production and use processes and define a functional unit for a garment. We then model important processes using a hierarchy of preferential data sources. We place special emphasis on the modeling of the principal local energy processes: electricity and transport in emerging countries. The spatially explicit inventory is disaggregated by country of location of the emissions and analyzed according to the dimensions of the study: location, product, and pollutant. The inventory shows striking differences between the two products considered as well as between the different pollutants considered. For the T-shirt, over 70% of the energy use and CO2 emissions occur in the consuming country, whereas for the jacket, more than 70% occur in the producing country. This reversal of proportions is due to differences in the use phase of the garments. For SO2, in contrast, over two thirds of the emissions occur in the country of production for both T-shirt and jacket. The difference in emission patterns between CO2 and SO2 is due to local electricity processes, justifying our emphasis on local energy infrastructure. The complexity of considering differences in location, product, and pollutant is rewarded by a much richer understanding of a global production-consumption chain. The inclusion of two different products in the LCI highlights the importance of the definition of a product's functional unit in the analysis and implications of results. Several use-phase scenarios demonstrate the importance of consumer behavior over equipment efficiency. The spatial emission patterns of the different pollutants allow us to understand the role of various energy infrastructure elements. The emission patterns furthermore inform the debate on the Environmental Kuznets Curve, which applies only to pollutants which can be easily filtered and does not take into account the effects of production displacement. We also discuss the appropriateness and limitations of applying the LCA methodology in a global context, especially in developing countries. Our spatial LCI method yields important insights in the quantity and pattern of emissions due to different product life cycle stages, dependent on the local technology, emphasizing the importance of consumer behavior. From a life cycle perspective, consumer education promoting air-drying and cool washing is more important than efficient appliances. Spatial LCI with country-specific data is a promising method, necessary for the challenges of globalized production-consumption chains. We recommend inventory reporting of final energy forms, such as electricity, and modular LCA databases, which would allow the easy modification of underlying energy infrastructure.

Integrating life cycle costs and environmental impacts of composite rail car-bodies for a Korean train

Background, aim, and scope A coupled Life Cycle Costing and life cycle assessment has been performed for car-bodies of the Korean Tilting Train eXpress (TTX) project using European and Korean databases, with the objective of assessing environmental and cost performance to aid materials and process selection. More specifically, the potential of polymer composite car-body structures for the Korean Tilting Train eXpress (TTX) has been investigated. Materials and methods This assessment includes the cost of both carriage manufacturing and use phases, coupled with the life cycle environmental impacts of all stages from raw material production, through carriage manufacture and use, to end-of-life scenarios. Metallic carriages were compared with two composite options: hybrid steel-composite and full-composite carriages. The total planned production for this regional Korean train was 440 cars, with an annual production volume of 80 cars. Results and discussion The coupled analyses were used to generate plots of cost versus energy consumption and environmental impacts. The results show that the raw material and manufacturing phase costs are approximately half of the total life cycle costs, whilst their environmental impact is relatively insignificant (3-8%). The use phase of the car-body has the largest environmental impact for all scenarios, with near negligible contributions from the other phases. Since steel rail carriages weigh more (27-51%), the use phase cost is correspondingly higher, resulting in both the greatest environmental impact and the highest life cycle cost. Compared to the steel scenario, the hybrid composite variant has a lower life cycle cost (16%) and a lower environmental impact (26%). Though the full composite rail carriage may have the highest manufacturing cost, it results in the lowest total life cycle costs and lowest environmental impacts. Conclusions and recommendations This coupled cost and life cycle assessment showed that the full composite variant was the optimum solution. This case study showed that coupling of technical cost models with life cycle assessment offers an efficient route to accurately evaluate economic and environmental performance in a consistent way.

Dissection of hormone-responsive plasma membrane to nucleus signaling of Bravis Radix : its role in vascular differentiation and root meristem growth

AbstractPlants continuously grow during their complete life span and understanding the mechanisms that qualitatively regulate their traits remains a challenging topic in biology. The hormone auxin has been identified as a crucial molecule for shaping plant growth, as it has a role in most developmental processes. In the root, the directional, so-called polar transport of auxin generates a peak of concentration that specifies and maintains the stem cell niche and a subsequent gradient of decreasing concentration that also regulates cell proliferation and differentiation. For these reasons, auxin is considered the main morphogen of the root, as it is fundamental for its organization and maintenance. Recently, in Arabidopsis thaliana, a natural variation screen allowed the discovery of BREVIS RADIX (BRX) gene as a limiting factor for auxin responsive gene expression and thus for root growth.In this study, we discovered that BRX is a direct target of auxin that positively feeds back on auxin signaling, as a transcriptional co-regulator, through interaction with the Auxin Response Factor (ARF) MONOPTEROS (MP), modulating the auxin gene response magnitude during the transition between division and differentiation in the root meristem. Moreover, we provide evidence that BRX is activated at the plasma membrane level as an associated protein before moving into the nucleus to modulate cellular growth.To investigate the discrepancy between the auxin concentration and the expression pattern of its downstream targets, we combined experimental and computational approaches. Expression profiles deviating from the auxin gradient could only be modeled after intersection of auxin activity with the observed differential endocytosis pattern and with positive auto- regulatory feedback through plasma- membrane-to-nucleus transfer of BRX. Because BRX is required for expression of certain auxin response factor targets, our data suggest a cell-type-specific endocytosis-dependent input into transcriptional auxin perception. This input sustains expression of a subset of auxin-responsive genes across the root meristem's division and transition zones and is essential for meristem growth. Thus, the endocytosis pattern provides specific positional information to modulate auxin response. RésuméLes plantes croissent continuellement tout au long de leur cycle de vie. Comprendre et expliquer les mécanismes impliqués dans ce phénomène reste à l'heure actuelle, un défi. L'hormone auxine a été identifiée comme une molécule essentielle à la régulation de la croissance des plantes, car impliquée dans la plupart des processus développementaux. Dans la racine, le transport polaire de l'auxine, par la génération d'un pic de concentration, spécifie et maintient la niche de cellules souches, et par la génération d'un gradient de concentration, contrôle la prolifération et la différentiation cellulaire. Puisque l'auxine est essentielle pour l'organisation et la maintenance du système racinaire, il est considéré comme son principal morphogène. Récemment, dans la plante modèle, Arabidopsis thalinana, un criblage des variations génétique a permis d'identifier le gène Brevis radix (BRX) comme facteur limitant l'expression des gènes de réponse à l'auxine et par là même, la croissance de la racine.Dans ce travail, nous avons découvert que BRX est une cible direct de l'auxine qui rétroactive positivement le signalement de l'hormone, agissant ainsi comme un régulateur transcriptionnel à travers l'interaction avec la protéine Monopteros (MP) de la famille des facteurs de réponse à l'auxine (Auxin Responsive Factor, ARF), et modulant ainsi la magnitude de la réponse des gènes reliés à l'auxine durant la division et la différentiation cellulaire dans le méristème de la racine. De plus, nous fournissons des preuves que BRX est activées au niveau de la membrane plasmique, tel une protéine associée se déplaçant à l'intérieur du noyau et modulant la croissance cellulaire.Pour mener à bien l'investigation des divergences entre la concentration de l'auxine et les schémas d'expression de ses propres gènes cibles, nous avons combiné les approches expérimentales et computationnelles. Les profiles d'expressions déviant du gradient d'auxine pourraient seulement être modéliser après intersection de l'activité de l'auxine avec les schémas différentiels d'endocytose observés et les boucles de rétroaction positives et autorégulatrices par le transfert de BRX de la membrane plasmique au noyau. Puisque BRX est requis pour l'expression de certains gènes cibles des facteurs de réponse à l'auxine, nos données suggèrent une contribution dépendante d'une endocytose spécifique au type de cellule dans la perception transcriptionnelle à l'auxine Cette contribution soutient l'expression d'un sous-set de gène de réponse à l'auxine dans la division du méristème racinaire et la zone de transition, et par conséquent, est essentielle pour la croissance méristematique. Ainsi, le schéma d'endocytose fournit des informations positionnelles spécifiques à la modulation de la réponse à l'auxine.

Histone H1 expression varies during the Leishmania major life cycle.

The deduced amino acid sequence of Leishmania major sw3 cDNA reveals the presence of characteristic histone H1 amino acid motifs. However, the open reading frame is of an unusually small size for histone H1 (105 amino acids) because it lacks the coding potential for the central hydrophobic globular domain of linker histones present in other eukaryotes. Here, we provide biochemical evidence that the SW3 protein is indeed a L. major nuclear histone H1, and that it is differentially expressed during the life cycle of the parasite. Due to its high lysine content, the SW3 protein can be purified to a high degree from L. major nuclear lysates with 5% perchloric acid, a histone H1 preparative method. Using an anti-SW3 antibody, this protein is detected as a 17 kDa or as a 17/19 kDa doublet in the nuclear subfraction in different L. major strains. The nuclear localization of the SW3 protein is further supported by immunofluorescence studies. During in vitro promastigote growth, both the sw3 cytoplasmic mRNA and its protein progressively accumulate within parasites from early log phase to stationary phase. Within amastigotes, the high level of H1 expression is maintained but decreases when amastigotes differentiate into promastigotes. Together, these observations suggest that the different levels of this histone H1 protein could influence the varying degrees of chromatin condensation during the life-cycle of the parasite, and provide us with tools to study this mechanism.

Regulation of the activity of DnaA and its role during the cell cycle of caulobacter crescentus

The initiation of chromosomal replication must be tightly regulated so that the genome is replicated only once per cell cycle. In most bacteria, DnaA binds to the origin of replication and initiates chromosomal replication. DnaA is a dual-function protein that also acts as an important transcription factor that regulates the expression of many genes in bacteria. Thus, understanding how this protein is regulated during the bacterial cell cycle is of major importance. The α-proteobacterium Caulobacter crescentus is an excellent model to study the bacterial cell cycle, mainly because it is possible to isolate synchronized cell cultures and because it initiates the replication of its chromosome once per cell cycle and at a specific time of the cell cycle. This latest feature is of special interest for the major aim of my thesis work, which focused on the temporal and spatial regulation of the activity of the essential DnaA protein in C. crescentus. In Escherichia coli, the Hda protein converts ATP-DnaA into ADP- DnaA by stimulating the ATPase activity of DnaA, to prevent over-initiation of chromosome replication. We propose that there exists a similar mechanism in C. crescentus, which is not only involved in the temporal control of chromosome replication, but also in the control of gene expression. First, we provided evidences indicating that the hydrolysis of the ATP bound to DnaA is essential for the viability of C. crescentus. Our results suggest that ATP-DnaA promotes the initiation of chromosome replication, since we found that cells over-expressing a DnaA protein with a mutated ATPase domain, DnaA(R357A), over-initiated chromosome replication, unlike cells expressing the wild-type DnaA protein at similar levels. By contrast, the DnaA(R357A) protein was less active than DnaA in promoting the transcription of three essential genes, suggesting that these may be more efficiently activated by ADP-DnaA than ATP-DnaA. We propose that the ATP-DnaA to ADP-DnaA switch down-regulates the initiation of DNA replication while activating the transcription of several essential genes involved in subsequent cell cycle events. Second, we studied the role of the HdaA protein, homologous to Hda, in promoting the ATP- DnaA to ADP-DnaA switch in C. crescentus. HdaA is essential for viability and its depletion in the cell leads to an over-replication of the chromosome, indicating that HdaA is a negative regulator of DNA replication. HdaA dynamically co-localizes with the replisome. In this work, we identified DnaN, the β-clamp of the DNA polymerase, as the replisome component that interacts directly with HdaA and that recruits HdaA to the replisome in live C. crescentus cells. We also showed that a mutant HdaA protein that cannot interact or co-localize with DnaN is not functional, indicating that HdaA is probably activated by DnaN. However, we found that another non-functional HdaA protein, mutated in the conserved Arginine finger of its AAA+ domain, was able to localize at the replisome, suggesting that the AAA+ domain of HdaA exerts its essential function after the recruitment of HdaA to the replisome. We propose that HdaA stimulates the ATPase activity of DnaA once DNA replication is ongoing, via its interaction with DnaN and the activity of the two conserved R fingers of DnaA and HdaA. Finally, we created different strains in which HdaA, DnaN or DnaA were over-produced. We observed that the over-production of HdaA seems to lead to a delay in chromosome replication, while the over-production of DnaN had an opposite effect. Our results also indicate that the over-production of DnaA may intensify the over-initiation phenotype of cells depleted for HdaA. We conclude that the dynamic interplay of HdaA and DnaN in the cell contributes to regulating the ATP-DnaA/ADP-DnaA ratio in the cell, to ensure once per cell cycle initiation of chromosomal replication in C. crescentus. Altogether, our work provided important information on the regulation of the activity of DnaA in C. crescentus. Since DnaA, HdaA and DnaN are well-conserved proteins, most of our findings are useful to understand how chromosome replication and gene expression are controlled by DnaA in many other bacterial species. - L'initiation de la réplication des chromosomes doit être précisément régulée de telle sorte que le génome ne soit répliqué qu'une seule fois par cycle cellulaire. Chez la plupart des bactéries, DnaA se lie à l'origine de réplication du chromosome et en initie sa réplication. DnaA est aussi un facteur de transcription qui régule l'expression de nombreux gènes bactériens. De ce fait, il est très important de comprendre comment DnaA est régulée au cours du cycle cellulaire bactérien. L'a-protéobactérie Caulobacter crescentus est un excellent modèle pour étudier le cycle cellulaire bactérien, essentiellement parce qu'il est aisé d'isoler des populations de cellules synchronisées à la même étape du cycle cellulaire et parce que cette bactérie n'initie la réplication de son chromosome qu'une seule fois et à un moment précis de son cycle. Cette dernière caractéristique est particulièrement pertinente pour l'objectif de mon travail doctoral, qui consistait à comprendre comment l'activité de la protéine essentielle DnaA est régulée dans l'espace et dans le temps chez C. crescentus. Chez Escherichia coli, la protéine Hda convertie DnaA-ATP en DnaA-ADP en stimulant l'activité ATPasique de DnaA, ce qui empêche la sur-initiation de la réplication du chromosome. Nous proposons qu'un mécanisme similaire existe chez C. crescentus. Il serait non seulement nécessaire au contrôle de la réplication du chromosome, mais aussi au contrôle de l'expression de certains gènes. Dans un premier temps, nous avons mis en évidence le fait que l'hydrolyse de l'ATP lié à DnaA est un processus essentiel à la viabilité de C. crescentus. Nos résultats suggèrent que DnaA-ATP initie la réplication du chromosome, comme nous avons observé que des cellules qui sur-expriment une protéine DnaA(R357A) mutée sans domaine ATPasique fonctionnel, sur-initie la réplication de leur chromosome, contrairement aux cellules qui sur-expriment la protéine DnaA sauvage à des niveaux équivalents. Au contraire, la protéine DnaA(R357A) était moins active que la protéine DnaA sauvage pour promouvoir la transcription de trois gènes essentiels, ce qui suggère que ces derniers sont peut-être plus efficacement activés par DnaA-ADP que DnaA-ATP. Nous proposons que la conversion de DnaA-ATP en DnaA-ADP réprime l'initiation de la réplication, tandis qu'elle active la transcription de plusieurs gènes impliqués dans des étapes plus tardives du cycle cellulaire. Dans un deuxième temps, nous avons étudié le rôle de la protéine HdaA, homologue à Hda, dans la conversion de DnaA-ATP en DnaA-ADP chez C. crescentus. Cette protéine est essentielle à la viabilité de C. crescentus et sa déplétion donne des cellules qui sur-initient la réplication de leur chromosome, suggérant que HdaA est un répresseur de la réplication du chromosome. HdaA co-localise de manière dynamique avec le réplisome. Lors de mon travail doctoral, nous avons démontré que DnaN, le β-clamp de l'ADN polymérase, est l'élément qui recrute HdaA au réplisome in vivo. Nous avons aussi montré qu'une protéine HdaA mutante qui ne peut pas interagir ou co-localiser avec DnaN, n'est pas fonctionnelle, ce qui suggère que HdaA est activée par DnaN. Nous avons néanmoins aussi isolé une autre protéine HdaA non fonctionnelle, dont une arginine conservée de son domaine AAA+ était mutée, mais qui pouvait toujours co-localiser avec le réplisome, ce qui suggère que le domaine AAA+ de HdaA est nécessaire après le recrutement de HdaA au réplisome. Nous proposons que HdaA stimule l'activité ATPasique de DnaA qu'une fois que la réplication a commencé, grâce à son interaction avec DnaN et aux deux arginines conservées des protéines HdaA et DnaA. Finalement, nous avons construit différentes souches sur-exprimant HdaA, DnaN ou DnaA. Nous avons observé que la sur-production de HdaA retarde la réplication du chromosome, tandis que la sur-production de DnaN a un effet opposé. Nos observations suggèrent aussi que la sur-expression de DnaA dans des cellules déplétées pour HdaA aggrave leur phénotype de sur-initiation. Nous en concluons que HdaA et DnaN collaborent étroitement et de manière dynamique pour réguler le rapport DnaA-ATP/DnaA-ADP dans la cellule, pour s'assurer que la réplication du chromosome ne soit initiée qu'une seule fois par cycle cellulaire chez C. crescentus. Globalement, notre travail a mis en évidence des informations importantes sur la régulation de l'activité de DnaA chez C. crescentus. Comme DnaA, HdaA et DnaN sont des protéines très conservées, la plupart de nos découvertes sont utiles pour mieux comprendre comment la réplication du chromosome bactérien et l'expression des gènes sont contrôlées par DnaA chez de nombreuses autres espèces bactériennes.

The complete genome sequence of the gram-positive bacterium Bacillus subtilis.

Bacillus subtilis is the best-characterized member of the Gram-positive bacteria. Its genome of 4,214,810 base pairs comprises 4,100 protein-coding genes. Of these protein-coding genes, 53% are represented once, while a quarter of the genome corresponds to several gene families that have been greatly expanded by gene duplication, the largest family containing 77 putative ATP-binding transport proteins. In addition, a large proportion of the genetic capacity is devoted to the utilization of a variety of carbon sources, including many plant-derived molecules. The identification of five signal peptidase genes, as well as several genes for components of the secretion apparatus, is important given the capacity of Bacillus strains to secrete large amounts of industrially important enzymes. Many of the genes are involved in the synthesis of secondary metabolites, including antibiotics, that are more typically associated with Streptomyces species. The genome contains at least ten prophages or remnants of prophages, indicating that bacteriophage infection has played an important evolutionary role in horizontal gene transfer, in particular in the propagation of bacterial pathogenesis.

Results of An International Study of Quantitative BCR/ABL Assays Using Defined RNA Samples

Molecular monitoring of BCR/ABL transcripts by real time quantitative reverse transcription PCR (qRT-PCR) is an essential technique for clinical management of patients with BCR/ABL-positive CML and ALL. Though quantitative BCR/ABL assays are performed in hundreds of laboratories worldwide, results among these laboratories cannot be reliably compared due to heterogeneity in test methods, data analysis, reporting, and lack of quantitative standards. Recent efforts towards standardization have been limited in scope. Aliquots of RNA were sent to clinical test centers worldwide in order to evaluate methods and reporting for e1a2, b2a2, and b3a2 transcript levels using their own qRT-PCR assays. Total RNA was isolated from tissue culture cells that expressed each of the different BCR/ABL transcripts. Serial log dilutions were prepared, ranging from 100 to 10-5, in RNA isolated from HL60 cells. Laboratories performed 5 independent qRT-PCR reactions for each sample type at each dilution. In addition, 15 qRT-PCR reactions of the 10-3 b3a2 RNA dilution were run to assess reproducibility within and between laboratories. Participants were asked to run the samples following their standard protocols and to report cycle threshold (Ct), quantitative values for BCR/ABL and housekeeping genes, and ratios of BCR/ABL to housekeeping genes for each sample RNA. Thirty-seven (n=37) participants have submitted qRT-PCR results for analysis (36, 37, and 34 labs generated data for b2a2, b3a2, and e1a2, respectively). The limit of detection for this study was defined as the lowest dilution that a Ct value could be detected for all 5 replicates. For b2a2, 15, 16, 4, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. For b3a2, 20, 13, and 4 labs showed a limit of detection at the 10-5, 10-4, and 10-3 dilutions, respectively. For e1a2, 10, 21, 2, and 1 lab(s) showed a limit of detection at the 10-5, 10-4, 10-3, and 10-2 dilutions, respectively. Log %BCR/ABL ratio values provided a method for comparing results between the different laboratories for each BCR/ABL dilution series. Linear regression analysis revealed concordance among the majority of participant data over the 10-1 to 10-4 dilutions. The overall slope values showed comparable results among the majority of b2a2 (mean=0.939; median=0.9627; range (0.399 - 1.1872)), b3a2 (mean=0.925; median=0.922; range (0.625 - 1.140)), and e1a2 (mean=0.897; median=0.909; range (0.5174 - 1.138)) laboratory results (Fig. 1-3)). Thirty-four (n=34) out of the 37 laboratories reported Ct values for all 15 replicates and only those with a complete data set were included in the inter-lab calculations. Eleven laboratories either did not report their copy number data or used other reporting units such as nanograms or cell numbers; therefore, only 26 laboratories were included in the overall analysis of copy numbers. The median copy number was 348.4, with a range from 15.6 to 547,000 copies (approximately a 4.5 log difference); the median intra-lab %CV was 19.2% with a range from 4.2% to 82.6%. While our international performance evaluation using serially diluted RNA samples has reinforced the fact that heterogeneity exists among clinical laboratories, it has also demonstrated that performance within a laboratory is overall very consistent. Accordingly, the availability of defined BCR/ABL RNAs may facilitate the validation of all phases of quantitative BCR/ABL analysis and may be extremely useful as a tool for monitoring assay performance. Ongoing analyses of these materials, along with the development of additional control materials, may solidify consensus around their application in routine laboratory testing and possible integration in worldwide efforts to standardize quantitative BCR/ABL testing.

Early selection in open-pollinated Eucalyptus families based on competition covariates

The objetive of this work was to evaluate the influence of intergenotypic competition in open-pollinated families of Eucalyptus and its effects on early selection efficiency. Two experiments were carried out, in which the timber volume was evaluated at three ages, in a randomized complete block design. Data from the three years of evaluation (experiment 1, at 2, 4, and 7 years; and experiment 2, at 2, 5, and 7 years) were analyzed using mixed models. The following were estimated: variance components, genetic parameters, selection gains, effective number, early selection efficiency, selection gain per unit time, and coincidence of selection with and without the use of competition covariates. Competition effect was nonsignificant for ages under three years, and adjustment using competition covariates was unnecessary. Early selection for families is effective; families that have a late growth spurt are more vulnerable to competition, which markedly impairs ranking at the end of the cycle. Early selection is efficient according to all adopted criteria, and the age of around three years is the most recommended, given the high efficiency and accuracy rate in the indication of trees and families. The addition of competition covariates at the end of the cycle improves early selection efficiency for almost all studied criteria.