The nature of anterior knee pain following injection of hypertonic saline into the infrapatellar fat pad

The infrapatellar fat pad has been implicated as a possible source of anterior knee pain. This study examined the nature, distribution and time-course of experimentally induced pain in the infrapatellar fat pad. Hypertonic saline (5%) was injected into the medial fat pad of 11 healthy individuals with no history of knee pain. Severity of pain was assessed at rest and during activity using an 11 point numerical rating scale (NRS) at regular intervals over 15-30 min following injection. Participants described the size of the pain region from a series of different sized circles while the area and type of pain was established from a body chart and the McGill pain questionnaire. The effect of pain on temperature-pain threshold and sensory thresholds of the anterior knee was assessed. Participants generally reported a deep aching pain that peaked in severity around 3 min and gradually declined over 15 min. Pain levels were not altered by clinical manoeuvres designed to impinge the fat pad. The size of the pain region was related to pain intensity. Pain was most commonly felt in the region of the fat pad medial to the patella, although some individuals reported proximal referred pain as far as the groin region. Thermal and sensory thresholds were not altered at a region close to the injection site during the experimental pain. These results suggest that nociceptive stimulation of the infrapatellar fat pad may cause anterior knee pain that is not necessarily confined locally particularly if pain is severe. This has implications for the investigation of pathological structures in patients presenting clinically with anterior knee pain and provides an experimental model of anterior knee pain. (C) 2003 Orthopaedic Research Society. Published by Elsevier Ltd. All rights reserved.

The relationship of adult attachment to emotion, catastrophizing, control, threshold and tolerance, in experimentally-induced pain

Although insecure attachment has been associated with a range of variables linked with problematic adjustment to chronic pain, the causal direction of these relationships remains unclear. Adult attachment style is, theoretically, developmentally antecedent to cognitions, emotions and behaviours (and might therefore be expected to contribute to maladjustment). It can also be argued, however, that the experience of chronic pain increases attachment insecurity. This project examined this issue by determining associations between adult attachment characteristics, collected prior to an acute (coldpressor) pain experience, and a range of emotional, cognitive, pain tolerance, intensity and threshold variables collected during and after the coldpressor task. A convenience sample of 58 participants with no history of chronic pain was recruited. Results demonstrated that attachment anxiety was associated with lower pain thresholds; more stress, depression, and catastrophizing; diminished perceptions of control over pain; and diminished ability to decrease pain. Conversely, secure attachment was linked with lower levels of depression and catastrophizing, and more control over pain. Of particular interest were findings that attachment style moderated the effects of pain intensity on the tendency to catastrophize, such that insecurely attached individuals were more likely to catastrophize when reporting high pain intensity. This is the first study to link attachment with perceptions of pain in a pain-free sample. These findings cast anxious attachment as a vulnerability factor for chronic pain following acute episodes of pain, while secure attachment may provide more resilience. (c) 2006 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

The impact of neurodynamic testing on the perception of experimentally induced muscle pain

Neurodynamic tests such as the straight leg raising (SLR) and slump test are frequently used for assessment of mechanosensitivity of neural tissues. However, there is ongoing debate in the literature regarding the contributions of neural and non-neural tissues to the elicited symptoms because many structures are affected by these tests. Sensitizing manoeuvres are limb or spinal movements added to neurodynamic tests, which aim to identify the origin of the symptoms by preferentially loading or unloading neural structures. A prerequisite for the use of sensitizing manoeuvres to identify neural involvement is that the addition of sensitizing manoeuvres has no impact on pain perception when the origin of the pain is non-neural. In this study, experimental muscle pain was induced by injection of hypertonic saline in tibialis anterior or soleus in 25 asymptomatic, naive volunteers. A first experiment investigated the impact of hip adduction, abduction, medial and lateral rotation in the SLR position. In a second experiment, the different stages of the slump test were examined. The intensity and area of experimentally induced muscle pain did not increase when sensitizing manoeuvres were added to the SLR or throughout the successive stages of the slump test. The findings of this study lend support to the validity of the use of sensitizing manoeuvres during neurodynamic testing. (C) 2004 Elsevier Ltd. All rights reserved.

A programme of static positional stretches does not reduce hemiplegic shoulder pain or maintain shoulder range of motion - a randomized controlled trial

Objective: To evaluate the effectiveness of a programme of static positional stretches and positioning of the stroke-affected shoulder for maintaining shoulder external rotation and decreasing hemiplegic shoulder pain. Design: Randomized controlled trial with pretest and posttest design. Setting: Inpatient rehabilitation unit. Subjects: Thirty-two participants ( 17 treatment, 15 comparison) with a first time stroke who were admitted for rehabilitation. Interventions: Treatment participants completed a programme of static positional stretches of the stroke-affected shoulder twice daily and positioned the stroke-affected upper limb in an armrest support at all other times when seated. Main measures: The main outcome measures were pain-free range of motion into external rotation, pain in the stroke-affected shoulder at rest and with movement, motor recovery and functional independence. Results: All participants demonstrated a significant loss of external rotation ( P = 0.005) with no significant group differences. All participants demonstrated a significant improvement in motor recovery ( P < 0.01) and functional independence ( P < 0.01) with no significant group differences. There were no significant effects for pain. The comparison group recorded a decrease in mean pain reported with movement from admission to discharge, and the treatment group recorded an increase. Conclusions: Participation in the management programme did not result in improved outcomes. The results of this study do not support the application of the programme of static positional stretches to maintain range of motion in the shoulder. The effect of increasing pain for the treatment group requires further investigation.

Adult attachment, anxiety, and pain self-efficacy as predictors of pain intensity and disability

Pain self-efficacy and anxiety have each been shown to contribute substantially to pain intensity and pain-related disability. Although adult attachment theory has been related separately to chronic pain, anxiety, and self-efficacy, it has not before been investigated with either pain self-efficacy or anxiety in the context of chronic pain. This study investigated the interrelations between these aspects of the chronic pain experience and their relative contributions towards pain intensity and disability. A clinical sample of 152 chronic pain patients participated in this study, completing self-report measures of attachment, self-efficacy, pain intensity, and disability, prior to attending a multidisciplinary pain clinic. Results revealed that fearful and preoccupied (anxious) attachment categories were associated with low pain self-efficacy, while high scores on the attachment dimension of comfort with closeness were linked with high pain self-efficacy, particularly for males. Insecure attachment (whether defined in terms of categories or dimensions) was related to higher levels of anxiety. Pain self-efficacy proved a stronger predictor of pain intensity than did anxiety and was a stronger predictor of disability than pain intensity or anxiety. In addition, comfort with closeness moderated the associations between pain self-efficacy and disability, pain self-efficacy and pain intensity, and anxiety and disability. Together, these findings support the value of adopting an attachment theoretical approach in the context of chronic pain. Treatment considerations and future research directions are considered. (c) 2006 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.

An endurance-strength training regime is effective in reducing myoelectric manifestations of cervical flexor muscle fatigue in females with chronic neck pain

Objective: The purpose of this study was to investigate whether an endurance-strength training program is effective in reducing myoelectric manifestations of sternocleidomastoid (SCM) and anterior scalene (AS) muscle fatigue which have been found to be greater in people with chronic neck pain. Methods: Fifty-eight female patients with chronic non-severe neck pain were randomized into one of two 6-week exercise intervention groups: an endurance-strength training regime for the cervical flexor muscles or a referent exercise intervention involving low load retraining of the cranio-cervical flexor muscles. The primary outcomes were a change in maximum voluntary contraction (MVC) force and change of the initial value and rate of change of the mean frequency, average rectified value and conduction velocity detected from the SCM and AS muscles during sub-maximal isometric cervical flexion contractions at 50, 25 and 10% MVC. Results: At the 7th week follow-up assessment, the endurance-strength training group revealed a significant increase in MVC force and a reduction in the estimates of the initial value and rate of change of the mean frequency for both the SCM and AS muscles (P < 0.05). Both exercise groups reported a reduced average intensity of neck pain and reduced neck disability index score (P < 0.05). Conclusions: An endurance-strength exercise regime for the cervical flexor muscles is effective in reducing myoelectric manifestations of superficial cervical flexor muscle fatigue as well as increasing cervical flexion strength in a group of patients with chronic non-severe neck pain. Significance: Provision of load to challenge the neck flexor muscles is required to reduce the fatigability of the SCM and AS muscles in people with neck pain. Improvements in cervical muscle strength and reduced fatigability may be responsible for the reported efficacy with this type of exercise program. (c) 2006 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All fights reserved.

Disorders of breathing and continence have a stronger association with back pain than obesity and physical activity

Although obesity and physical activity have been argued to predict back pain, these factors are also related to incontinence and breathing difficulties. Breathing and continence mechanisms may interfere with the physiology of spinal control, and may provide a link to back pain. The aim of this study was to establish the association between back pain and disorders of continence and respiration in women. We conducted a cross-sectional analysis of self-report, postal survey data from the Australian Longitudinal Study on Women's Health. We used multinomial logistic regression to model four levels of back pain in relation to both the traditional risk factors of body mass index and activity level, and the potential risk factors of incontinence, breathing difficulties, and allergy. A total of 38 050 women were included from three age-cohorts. When incontinence and breathing difficulties were considered, obesity and physical activity were not consistently associated with back pain. In contrast, odds ratios (OR) for often having back pain were higher for women often having incontinence compared to women without incontinence (OR were 2.5, 2.3 and 2.3 for young, mid-age! and older women, respectively). Similarly, mid-aged and older women had higher odds of having back pain often when they experienced breathing difficulties often compared to women with no breathing problems (OR of 2.0 and 1.9, respectively). Unlike obesity and physical activity, disorders of continence and respiration were strongly related to frequent back pain. This relationship may be explained by physiological limitations of co-ordination of postural, respiratory and continence functions of trunk muscles.

N-type calcium channel blockers: Novel therapeutics for the treatment of pain

Highly selective Cav2.2 voltage-gated calcium channel (VGCC) inhibitors have emerged as a new class of therapeutics for the treatment of chronic and neuropathic pain. Cone snail venoms provided the first drug in class with FDA approval granted in 2005 to Prialt (ω-conotoxin MVIIA, Elan) for the treatment of neuropathic pain. Since this pioneering work, major efforts underway to develop alternative small molecule inhibitors of Cav2.2 calcium channel have met with varied success. This review focuses on the properties of the Cav2.2 calcium channel in different pain states, the action of ω-conotoxins GVIA, MVIIA and CVID, describing their structure-activity relationships and potential as leads for the design of improved Cav2.2 calcium channel therapeutics, and finally the development of small molecules for the treatment of chronic pain.

My system of career influences: Responding to challenges facing career education

The present article explores major challenges facing career psychology, specifically within the field of career education. Several issues are identified including the need for more effective links between theory and practice, the movement towards constructivist theories and the related challenges of applying such theories. These issues are explored within the context of the reformulation of career education and through the lens of the constructivist Systems Theory Framework of career development and its applied activity, the My Systems of Career Influences.

Prevalence of patient with low intensity pain symptom severity states during treatment with Rofecoxib and Ibuprofen for osteoarthritis

Aim of study: To examine the prevalence of low intensity symptom severity states in patients taking placebo, rofecoxib 12.5 mg once daily, rofecoxib 25 mg once daily, or ibuprofen 800 mg three times daily using a post-hoc definition of low pain intensity states (BLISS Index) based on the WOMAC Index. Methods: Two 6-week, double-blind, parallel-group, placebocontrolled, ibuprofen-comparator studies were conducted to measure the efficacy of rofecoxib in patients with knee or hip osteoarthritis. These studies employed a flare design requiring a minimum level of symptoms at entry following discontinuation of prior analgesics. The WOMAC Pain subscale (100 mm visual analog scale) was used as the pain measure. In separate analyses, WOMAC pain subscale scores from each patient were compared to five thresholds of pain:%5 mm, %10 mm, %15 mm, %20 mm, and %25 mm. The percent of patients with BLISS states (1) on average over 6 weeks, (2) at any time during the study, and (3) at week 6 was computed for each treatment group and threshold. The treatment group percentages were compared using Fisher’s exact test. Results: During the study, patients received placebo (N Z 143), rofecoxib 12.5 mg (N Z 461), rofecoxib 25 mg (N Z 459), or ibuprofen (N Z 465). For each pain threshold and treatment group, the percent of patients with BLISS states at any time (e.g., 50% for rofecoxib 25 mg) exceeded the percentage at week 6 (e.g., 40% for rofecoxib 25 mg) which, in turn, exceeded the percentage with BLISS states on average (e.g., 32% for rofecoxib 25 mg). The percentages of patients in the active treatment groups with BLISS states on average were significantly different than observed in the placebo group at the%15 mm threshold (8–11% points vs placebo, P ! 0.01), %20 mm level (10–15% points, P ! 0.01), and %25 mm level (14–17% points, P ! 0.001). Significant differences between the active treatments and placebo were also observed at the %10 mm threshold (8–9% points, P ! 0.05) for measurements at week 6 and at the%10 (12–14% points, P !0.001) and%5 mm thresholds (5–7% points, P ! 0.05) for patients with BLISS states at any time. Conclusion: These measures of BLISS states differentiate all three active treatment groups from placebo and further confirm, at an individual patient level, the clinical benefit of rofecoxib in the treatment of osteoarthritis. Furthermore, they provide information on the prevalence of patients achieving low (%15 mm, %20 mm, %25 mm), and very low (%5 mm, %10 mm) pain severity states.

The future of manufacturing

Anyone who looks at the title of this special issue will agree that the intent behind the preparation of this volume was ambitious: to predict and discuss “The Future of Manufacturing”. Will manufacturing be important in the future? Even though some sceptics might say not, and put on the table some old familiar arguments, we would strongly disagree. To bring subsidies for the argument we issued the call-for-papers for this special issue of Journal of Manufacturing Technology Management, fully aware of the size of the challenge in our hands. But we strongly believed that the enterprise would be worthwhile. The point of departure is the ongoing debate concerning the meaning and content of manufacturing. The easily visualised internal activity of using tangible resources to make physical products in factories is no longer a viable way to characterise manufacturing. It is now a more loosely defined concept concerning the organisation and management of open, interdependent, systems for delivering goods and services, tangible and intangible, to diverse types of markets. Interestingly, Wickham Skinner is the most cited author in this special issue of JMTM. He provides the departure point of several articles because his vision and insights have guided and inspired researchers in production and operations management from the late 1960s until today. However, the picture that we draw after looking at the contributions in this special issue is intrinsically distinct, much more dynamic, and complex. Seven articles address the following research themes: 1.new patterns of organisation, where the boundaries of firms become blurred and the role of the firm in the production system as well as that of manufacturing within the firm become contingent; 2.new approaches to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface; 3.new challenges in strategic and operational decisions due to changes in the profile of the workforce; 4.new global players, especially China, modifying the manufacturing landscape; and 5.new techniques, methods and tools that are being made feasible through progress in new technological domains. Of course, many other important dimensions could be studied, but these themes are representative of current changes and future challenges. Three articles look at the first theme: organisational evolution of production and operations in firms and networks. Karlsson's and Skold's article represent one further step in their efforts to characterise “the extraprise”. In the article, they advance the construction of a new framework, based on “the network perspective” by defining the formal elements which compose it and exploring the meaning of different types of relationships. The way in which “actors, resources and activities” are conceptualised extends the existing boundaries of analytical thinking in operations management and open new avenues for research, teaching and practice. The higher level of abstraction, an intrinsic feature of the framework, is associated to the increasing degree of complexity that characterises decisions related to strategy and implementation in the manufacturing and operations area, a feature that is expected to become more and more pervasive as time proceeds. Riis, Johansen, Englyst and Sorensen have also based their article on their previous work, which in this case is on “the interactive firm”. They advance new propositions on strategic roles of manufacturing and discuss why the configuration of strategic manufacturing roles, at the level of the network, will become a key issue and how the indirect strategic roles of manufacturing will become increasingly important. Additionally, by considering that value chains will become value webs, they predict that shifts in strategic manufacturing roles will look like a sequence of moves similar to a game of chess. Then, lastly under the first theme, Fleury and Fleury develop a conceptual framework for the study of production systems in general derived from field research in the telecommunications industry, here considered a prototype of the coming information society and knowledge economy. They propose a new typology of firms which, on certain dimensions, complements the propositions found in the other two articles. Their telecoms-based framework (TbF) comprises six types of companies characterised by distinct profiles of organisational competences, which interact according to specific patterns of relationships, thus creating distinct configurations of production networks. The second theme is addressed by Kyläheiko and SandstroÍm in their article “Strategic options based framework for management of dynamic capabilities in manufacturing firms”. They propose a new approach to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface. Their framework for a manufacturing firm in the digital age leads to active asset selection (strategic investments in both tangible and intangible assets) and efficient orchestrating of the global value net in “thin” intangible asset markets. The framework consists of five steps based on Porter's five-forces model, the resources-based view, complemented by means of the concepts of strategic options and related flexibility issues. Thun, GroÍssler and Miczka's contribution to the third theme brings the human dimension to the debate regarding the future of manufacturing. Their article focuses on the challenges brought to management by the ageing of workers in Germany but, in the arguments that are raised, the future challenges associated to workers and work organisation in every production system become visible and relevant. An interesting point in the approach adopted by the authors is that not only the factual problems and solutions are taken into account but the perception of the managers is brought into the picture. China cannot be absent in the discussion of the future of manufacturing. Therefore, within the fourth theme, Vaidya, Bennett and Liu provide the evidence of the gradual improvement of Chinese companies in the medium and high-tech sectors, by using the revealed comparative advantage (RCA) analysis. The Chinese evolution is shown to be based on capabilities developed through combining international technology transfer and indigenous learning. The main implication for the Western companies is the need to take account of the accelerated rhythm of capability development in China. For other developing countries China's case provides lessons of great importance. Finally, under the fifth theme, Kuehnle's article: “Post mass production paradigm (PMPP) trajectories” provides a futuristic scenario of what is already around us and might become prevalent in the future. It takes a very intensive look at a whole set of dimensions that are affecting manufacturing now, and will influence manufacturing in the future, ranging from the application of ICT to the need for social transparency. In summary, this special issue of JMTM presents a brief, but undisputable, demonstration of the possible richness of manufacturing in the future. Indeed, we could even say that manufacturing has no future if we only stick to the past perspectives. Embracing the new is not easy. The new configurations of production systems, the distributed and complementary roles to be performed by distinct types of companies in diversified networked structures, leveraged by the new emergent technologies and associated the new challenges for managing people, are all themes that are carriers of the future. The Guest Editors of this special issue on the future of manufacturing are strongly convinced that their undertaking has been worthwhile.

Oscillatory dynamics in the perception of pain investigated using magnetoencephalography

This thesis investigates changes in the oscillatory dynamics in key areas of the pain matrix during different modalities of pain. Gamma oscillations were seen in the primary somatosensory cortex in response to somatic electrical stimulation at painful and non-painful intensities. The strength of the gamma oscillations was found to relate to the intensity of the stimulus. Gamma oscillations were not seen during distal oesophageal electrical stimulation or the cold pressor test. Gamma oscillations were not seen in all participants during somatic electrical stimulation, however clear evoked responses from SI were seen in everyone. During a train of electrical pulses to the median nerve and the digit, a decrease in the frequency of the gamma oscillations was seen across the duration of the train. During a train of electrical stimuli to the median nerve and the digit, gamma oscillations were seen at ~20-100ms following stimulus onset and at frequencies between 30-100Hz. This gamma response was found to have a strong evoked component. Following a single electrical pulse to the digit, gamma oscillations were seen at 100-250ms and between 60-95Hz and were not temporally coincident with the main components of the evoked response. These results suggest that gamma oscillations may have an important role in encoding different aspects of sensory stimuli within their characteristics such as strength and frequency. These findings help to elucidate how somatic stimuli are processed within the cortex which in turn may be used to understand abnormal cases of somatosensory processing.

Living together with age related macular degeneration:an interpretative phenomenological analysis of sense-making within a dyadic relationship

In this article, we present an idiographic analysis of a couple's experience of living and coming to terms with age-related macular degeneration. Interpretative phenomenological analysis was used to explore three joint interviews, conducted over an 18-month period, with a married couple (aged 82 and 77 years) both living with age-related macular degeneration. Three themes are discussed: the disruption of vision impairment, managing mutual deterioration and resilience through togetherness. We discuss the existential challenges of vision impairment and consider the applicability of Galvin and Todres' typology of well-being as a means of understanding well-being in older adults.

Challenges and emerging solutions in the development of compressed orally disintegrating tablets

Areas covered: The review discusses the main challenges of ODT manufacturing process and the emerging solutions featured at early drug development stages. The research specifically describes the methods reported for taste masking/assessment and solubilisation of unpalatable and poorly soluble drugs, respectively. Furthermore, this review highlights the techniques used for developing modified-release ODTs, an emerging area in the field. In addition, it also discusses the poor flowability and segregation problems of directly compressed powders. Moreover, the review describes the tests reported in the literature for ODT disintegration time assessment since a universal technique is still non-existent. Expert opinion: The approaches used to overcome the manufacturing challenges often have a bearing on the price of the end product. However, despite the technical and regulatory challenges, ODTs can offer many advantages over the conventional dosage forms if accompanied by suitable adjuvant technologies and in vitro analytical tools. © 2014 Informa UK, Ltd. Introduction: Orally disintegrating tablets (ODTs) provide several advantages over conventional tablets such as suitability for patients with swallowing difficulties and faster onset of action. The manufacture of ODTs by compression/tableting offers a practical and cost-effective strategy over the freeze drying (lyophilisation) method. Nonetheless, the FDA recommends a disintegration time of 30 s and a maximum weight of 500 mg for a tablet to be labelled as an ODT. These requirements, alongside other desirable product properties, have created a number of challenges for the formulator to overcome while developing compressed ODTs.