Constraints on Miocene oceanography and climate in the Western and Central Paratethys: O-, Sr-, and Nd-isotope compositions of marine fish and mammal remains

The Paratethys evolved as a marginal sea during the Alpine-Himalayan orogeny in the Oligo-Miocene. Sediments from the northern Alpine Molasse Basin, the Vienna, and the Pannonian Basins located in the western and central part of the Paratethys thus provide unique information on regional changes in climate and oceanography during a period of active Alpine uplift Oxygen isotope compositions of well-preserved phosphatic fossils recovered from the sediments support deposition under sub-tropical to warm-temperate climate with water temperatures of 14 to 28 degrees C for the Miocene. delta(18)O values of fossil shark teeth are similar to those reported for other Miocene marine sections and, using the best available estimates of their biostratigraphic age, show a variation until the end of the Badenian similar to that reported for composite global record. The (87)Sr/(86)Sr isotope ratios of the fossils follow the global Miocene seawater trend, albeit with a much larger scatter. The deviations of (87)Sr/(86)Sr in the samples from the well-constrained seawater curve are interpreted as due to local input of terrestrially-derived Sr. Contribution of local sources is also reflected in the epsilon(Nd) values, consistent with input from ancient crystalline rocks (e.g., Bohemian Massif and/or Mesozoic sediments with epsilon(Nd) < -9. On the other hand, there is evidence for input from areas with Neogene volcanism as suggested by samples with elevated epsilon(Nd) values >-7. Excluding samples showing local influence on the water column, an average epsilon(Nd) value of -7.9 +/- 0.5 may be inferred for the Miocene Paratethys. This value is indistinguishable from the epsilon(Nd) value of the contemporaneous Indian Ocean, supporting a dominant role of this ocean in the Western and Central Paratethys. (C) 2008 Elsevier B.V. All rights reserved.

Minerais, métaux, isotopes : recherches archéométriques sur les mines de plomb et d'argent en Valais, Suisse

RESUME Les nombreuses mines de plomb et d'argent du Valais témoignent d'une activité minière importante par le passé, sans toutefois dévoiler ni l'importance des minéralisations, ni l'ancienneté de l'exploitation. La présente recherche a pour but de comprendre pourquoi les grandes mines sont concentrées dans une région, et de déterminer la chronologie de leur exploitation. L'originalité de ce travail réside dans son interdisciplinarité, plus précisément dans l'application des méthodes minéralogiques pour résoudre une problématique historique. Afin d'évaluer les ressources minières en plomb et en argent du Valais, 57 mines et indices ont été repérés et échantillonnés. Les signatures isotopiques du Pb (74 analyses) et les compositions chimiques élémentaires (45 analyses) ont été déterminées. Les plus grandes exploitations se situent dans la nappe de Siviez-Mischabel, au Sud d'une ligne Vallée du Rhône / Val de Bagnes ainsi que dans le Lötschental. Elles sont liées, d'après leur signature isotopique de plomb, à des minéralisations d'âge calédonien (408 à 387 Ma) ou tardi-hercynien (333 à 286 Ma). À ces périodes, l'ancien continent est très lourd et subit une subsidence thermique. Des premières fractures d'extrême importance se forment. Comme il s'agit d'accidents tectoniques majeurs, des gisements de grande extension peuvent se former dans ce contexte. D'autres minéralisations se situent dans les domaines helvétiques (Massif des Aiguilles Rouges, Massif du Mont Blanc et couverture sédimentaire), couvrant une région au Nord de la Vallée du Rhône et du Val d'Entremont. D'âge post-hercynien à tardi-alpin (notons qu'il n'y a pas de minéralisations d'âge tertiaire), elles sont pour la plupart liées à des intrusions granitiques, sources de plomb juvénile. Les mines situées dans ces unités tectoniques sont nettement moins étendues que celles de la nappe de Siviez-Mischabel, ce qui permet de penser que les minéralisations correspondantes le sont également. Les périodes d'exploitation des mines peuvent être déterminées par quatre approches différentes l'archéologie minière, la lecture des textes historiques, l'étude des déchets métallurgiques et la comparaison de la signature isotopique du plomb, que l'on mesure dans un objet archéologique bien daté (monnaie, bijoux etc.), avec celles des minerais. Cette dernière méthode a été appliquée et développée dans le cadre de la présente recherche. Pour ce faire, 221 échantillons d'objet en plomb ou en argent datés entre l'Âge du Fer et le Moyen Age ont été analysés par la méthode des isotopes de plomb et comparés à environ 1800 signatures isotopiques de minerais des gisements les plus importants en Suisse et en Europe. Avant l'époque romaine et jusqu'au 1 er siècle de cette époque, le plomb provient principalement des mines de la péninsule ibérique alors en pleine activité. Un apport des mines d'Europe tempérée, notamment des Vosges, reste à confirmer. A partir du 1" siècle de notre ère, le plomb a principalement été importé en Suisse occidentale de grands centres de productions situées en Allemagne du Nord (région d'Eifel). Les mines de plomb valaisannes, notamment celles de Siviez, débutent leur exploitation en même temps, principalement pour couvrir les besoins locaux, mais également pour l'exportation jusque dans l'arc lémanique et, dans une moindre importance, au-delà. À partir du 4ème siècle, le besoin en plomb a été couvert par un apport des mines locales et par la refonte d'objets anciens. Ce changement d'approvisionnement est probablement lié aux tensions créées par les invasions germaniques durant la seconde moitié du 3' siècle ; le marché suisse n'est dès lors plus approvisionné par le nord, c'est-à-dire par la vallée du Rhin. Quant à l'argent, l'exploitation de ce métal est attestée à partir de la fin du La Tène, peu après l'apparition de ce métal dans la région valaisanne. L'échantillonnage ne couvrant pas l'époque romaine, rien n'est connu pour cette période. A partir du 5" siècle, une exploitation d'argent est de nouveau attestée. Cependant, l'exploitation d'argent des mines locales ne gagne en importance qu'à partir du Moyen Âge avec les frappes monétaires, notamment les frappes carolingiennes et épiscopales valaisannes. Les sources d'argent sont différentes selon leur utilisation : à part quelques exceptions notamment vers la fin du La Tène et au tardo-antique, les bijoux et objets de cultes ont été souvent créés à partir d'argent refondu, contrairement aux monnaies pour lesquelles l'argent provient des mines locales. On note un approvisionnement différent de ce métal pour les objets, notamment les monnaies, selon leur lieu de fabrication : on peut clairement distinguer les objets valaisans de ceux du Plateau Suisse. SUMMARY The many lead and silver mines of the Valais testify of an important mining activity in the past, without however revealing neither the importance of the mineralizations, nor the era of the exploitation. The purpose of this research is to understand why the large mines are concentrated in one region, and to determine the history of their exploitation. The uniqueness of this work lies in its interdisciplinarity, more precisely in the application of mineralogical methods to solve historical problems. In order to evaluate the lead and silver mining resources of the Valais region, 57 mines and ore deposits were located and sampled. The isotope signatures of Pb (74 analyses) and the compositions of the chemical elements (45 analyses) were determined. The largest activities are in the Siviez-Mischabel area, located in the South of the boundary formed by the Rhone, Bagnes and Lotschental valleys. According to their lead isotope signatures, they are linked to mineralizations of the Caledonian (408 to 387 my) or tardi-Hercynian (333 to 286 my) orogenies. In those times, the old continent was very heavy and underwent a thermal subsidence. First fractures of great significance were formed. Through these major tectonic events, large extended ore deposits can be formed. Other mineralizations are found in the helvetic regions situated north of the Rhone and the Entremont valley (the Aiguilles Rouges basement, Mount Blanc basement and the covering sediment). Because they are from post-hercynien to tardi-alpine age (there are no mineralizations of tertiary age), they are mainly linked to granite intrusions, the sources of juvenile lead. The mines found in these tectonic units are significantly less extensive than those of the Siviez-Mischabel area, leading to the assumption that the respective mineralizations extend accordingly. The history of exploitation of the mines can be determined by four different sources: mining archaeology, historical texts, metallurgical waste, and the comparison of the isotope signature of the lead from accurately dated archaeological objects (currency, jewels etc), with those of the ores. This last approach was applied and developed within the framework of this research. The lead isotope signatures of 221 lead or silver objects from the Iron Age to the Middle Age were compared with approximately 1800 samples of ore of the most important ore deposits in Switzerland and Europe. Before the Roman time up to the 1st century, lead comes mainly from the mines of the Iberian Peninsula then in full activity. A contribution of the mines of Central Europe, in particular of the Vosges, remains to be confirmed. From the 1st century on, lead was mainly imported into Western Switzerland from Northern Germany (Eiffel region). The lead mines in the Valais region, in particular those of Siviez, begin their exploitation at the same time, mainly to meet the local needs, but also for export to the lemanic basin and of lesser importance, beyond. As from the 4th century, the need of lead was met by the production from local mines and the recycling of old objects. This change of supply is probably related to the tensions created by the Germanic invasions during second half of the 3rd century; as a consequence, the Swiss market is not supplied any more by the north, i.e. the Rhine valley. Silver production is confirmed starting from the end of La Tene, shortly after the appearance of this metal in the Valais region. Since no objects of Roman origin were analyzed, nothing is known for this period. From the 5th century on, silver production is again confirmed. However, significant silver production from local mines starts only in the Middle Age with the coinage, in particular Carolingian and Episcopal minting from the Valais region. The sources of silver differ according to their use: besides some exceptions in particular towards the end of La Tene and the tardi-Roman, the jewels and objects of worships were often created from recycled silver, contrary to the coins the silver for which comes from the local mines. A different source of silver is observed according to the location of coin manufacture: Objects originating from the Valais region are clearly distinguished from those from the Plateau Suisse. ZUSAMMENFASSUNG Die grosse Zahl von Blei- und Silberminen im Wallis ist Zeugnis einer bedeutenden Bergbautätigkeit, es fehlen aber Hinweise über ihren Umfang und den Zeitraum ihrer Ausbeutung. Die vorliegende Arbeit sucht zu ergründen, warum grosse Minen sich in einer eng begrenzten Region häufen und in welchem Zeitraum sie genutzt wurden. Die Besonderheit der Studie liegt in ihrer Interdisziplinarität, genauer in der Anwendung von mineralogischen Methoden zur Beantwortung historischer Fragestellungen. Zur Beurteilung der Lagerstätten wurden von 57 Minen und Aufschlüssen Proben entnommen oder Nachweise erbracht und mittels 74 Isotopen-Analysen von Blei und 45 chemischen Gesamtanalysen ausgewertet. Die wichtigsten Vorkommen liegen in der Siviez- Mischabel- Decke südlich der Linie Rhonetal- Val de Bagnes, sowie im Lötschental. Die Bleiisotopen- Alter weisen ihre Entstehung der kaledonischen (408 - 387 Mio. J.) oder der spät- herzynischen (333 - 286 Mio. J.) Gebirgsbildungsphase zu. In dieser Periode ist die kompakte Landmasse sehr schwer und erfairt eine thermische Absenkung. Es bilden sich tektonische Brüche von kontinentaler Ausdehnung. Die grossen tektonischen Bewegungen ermöglichen die Bildung von ausgedehnten Lagerstätten. Andere Vorkommen finden sich im Bereich der Helvetischen Alpen (Aiguilles Rouges Massiv, Mont-Blanc-Massiv und Sediment-Decken) im Gebiet nördlich des Rhonetales bis zum Val d'Entremont. Altersmässig sind sie der nach-hercynischen bis zur spät-alpidischen Orogenese zuzuweisen (auffällig ist das Fehlen von Vorkommen im Tertiär) und haben sich meist in der Folge von Granit- Intrusion, dem Ursprung von primärem Blei ausgebildet. Die Bergwerke in diesem Bereich sind deutlich weniger ausgedehnt als jene in der Siviez-Mischabel-Decke und entsprechen wahrscheinlich dem geringen Umfang der zugehörigen Vorkommen. Die Nutzungsperioden der Minen können mit vier verschiedenen Methoden bestimmt werden: Minenarchäologie, Historische Quellen, Auswertung von metallischen Abfällen (Schlacken) und Vergleich der Bleiisotopen-Zusammensetzung von Erzen mit jener von zeitlich gut datierbaren archäologischen Gegenständen (Münzen, Schmuckstücke). Die letztere Methode wurde im Rahmen der vorliegenden Forschungsarbeit entwickelt und angewendet. Zu diesem Zweck wurden an 221 Proben von Blei- oder Silberobjekten, die in die Periode zwischen Eisenzeit und Mittelalter eingestuft werden können, Bleiisotopen- Analysen durchgeführt und mit ca. 1800 Proben aus den wichtigsten Lagerstätten der Schweiz und Europas verglichen. Vor der Römerzeit und bis ins 1. Jahrh. stammt das Blei vornehmlich aus den in jener Zeit in voller Ausbeutung begriffenen Minen der Iberischen Halbinsel. Der Beitrag von Mitteleuropa, besonders der Vogesen, muss noch bestätigt werden. Ab dem 1. Jahrh. nach Chr. wurde die Westschweiz hauptschlich mit Blei aus den grossen Produktionszentren Norddeutschlands, vorwiegend der Eifel, versorgt. In dieser Periode setzt die Ausbeutung der Bleiminen des Wallis, besonders von Siviez, ein. Sie dienen der Deckung des örtlichen Bedarfs aber auch der Ausfuhr in das Gebiet des Genfersees und in einem bescheidenen Rahmen sogar darüber hinaus. Ab dem 4. Jahrhundert wurden vermehrt alte Objekte eingeschmolzen. Dieser Wechsel der Versorgungsquellen war vermutlich eine Folge der Wölkerwanderung in der zweiten Hälfte des 3. Jahrhunderts. Ab diesem Zeitpunkt war Helvetien der Zugang zu den Versorgungsquellen des Nordens, besonders des Rheinlandes, verwehrt. Der Abbau von Silber ist ab dem Ende des La Tène nachgewiesen, nur wenig nach dem Auftreten dieses Metalls im Wallis. Über die Römerzeit können wegen dem Fehlen entsprechender Proben keine Aussagen gemacht werden. Eine erneute Abbauperiode ist ab dem 5. Jahrhundert nachgewiesen. Die Produktion der örtlichen Minen erreicht aber erst im Mittelalter eine gewisse Bedeutung mit der Prägung von Mnzen durch die Karolinger und die Walliser Bischöfe. Die Herkunft des Silbers ist abhängig von dessen Verwendung. Mit wenigen Ausnahmen in der Zeit des La Tène und der späteren Römerzeit wurde für Kunst- und Kult- Gegenstände rezykliertes Silber verwendet, für Münzprägungen neues Silber aus den örtlichen Minen. Von Einfluss auf die Herkunft war auch der Produktionsstandort: Die Objekte aus dem Wallis unterscheiden sich deutlich von jenen des Mittellandes.

Iowa Fen Rapid Assessment Method for Wetlands v. 1 Quantitative Rating, 2016

Rapid assessment methods are valuable tools for collecting information about the quality and status of natural systems. However, they are not a substitute for detailed surveys of those systems. Users of this method should consider that the method may under-score or over-score the site that’s assessed, especially when the site is not a typical fen (i.e. a sedge meadow could score lower than fens, but in-fact be a relatively high quality sedge meadow). This assessment can be used throughout most of the spring, summer and fall period, however the ideal “index period” would be from late May through early October when native plant communities, as well as invasive species, are most apparent.

The Impact of Housing Market Segmentation between Tourists and Residents on the Hedonic Price for Landscape Quality

Market segmentation is an important issue when estimating the implicit price for an environmental amenity from a surrogate market like property. This paper tests the hypothesis of a segmentation of the housing market between tourists and residents and computes the implicit price for natural landscape quality in Swiss alpine resorts. The results show a clear segmentation between both groups of consumers, although tests also show that the estimated coefficient for landscape is similar in the tourists' model and in the residents'. However, since the functional form is non linear, the nominal - rather than relative - value of a change in natural landscape quality is higher in the tourist housing market than in the residents'. Hence, considering the segmentation of the market between tourists and residents is essential in order to provide valid estimates of the nominal implicit price of natural landscape quality.

Oxidation of methane at the CH4/H2O-(CO2) transition zone in the external part of the Central Alps, Switzerland: Evidence from stable isotope investigations

With the aim of understanding the mechanisms that control the metamorphic transition from the CH4- to the H2O-(CO2)-dominated fluid zone in the Helvetic domain of the Central Alps of Switzerland, fluid inclusions in quartz, illite ``crystallinity'' index, vitrinite reflectance, and the stable isotope compositions of vein and whole rock minerals and fluids trapped in quartz were investigated along four cross-sections. Increasing temperature during prograde metamorphism led to the formation of dry gas by hydrocarbon cracking in the CH4-zone. Fluid immiscibility in the H2O-CH4-(CO2)-NaCl system resulted in cogenetic, CH4- and H2O-dominated fluid inclusions. In the CH4-zone, fluids were trapped at temperatures <= 270 +/- 5 degrees C. The end of the CH4-zone is markedby a sudden increase of CO2 content in the gas phase of fluid inclusions. At temperatures > 270 +/- 5 degrees C, in the H2O-zone, the total amount of volatiles within the fluid decreased below 1 mol% with no immiscibility. This resulted m total homogenization temperatures of H2O-(CO2-CH4)-NaCl inclusions below 180 degrees C. Hydrogen isotope compositions of methane in fluid inclusion have delta D values of less than -100 parts per thousand in the CH4-zone, typical for an origin through cracking of higher hydrocarbons, but where the methane has not equilibrated with the pore water. delta D values of fluid inclusion water are around -40 parts per thousand., in isotopic equilibrium with phyllosilicates of the whole rocks. Within the CH4 to H2O(CO2) transition zone, delta D(H2O) values in fluid inclusions decrease to -130 parts per thousand interpreted to reflect the contribution of deuterium depleted water from methane oxidation. In the H2O-zone, delta D(H2O) values increase again towards an average of -30 parts per thousand which is again consistent with isotopic equilibrium with host-rock phyllosilicates. delta C-13 values of methane in fluid inclusions from the CH4-zone are around -27 parts per thousand in isotopic equilibrium with calcite in veins and whole rocks. The delta C-13(CH4) values decrease to less than -35 parts per thousand at the transition to the H2O-zone and are no longer in equilibrium with the carbonates in the whole rocks. delta C-13 values of CO, are variable but too low to be in equilibrium with the wall rock fluids, compatible with a contribution of CO2 from closed system oxidation of methane. Differences in isotopic composition between host-rock and Alpine fissure carbonate are generally small, suggesting that the amount of CO2 produced by oxidation of methane was small compared to the C-budget in the rocks and local pore fluids were buffered by the wall rocks during precipitation of calcite within the fissures. (c) 2006 Elsevier B.V. All rights reserved.

Oxygen-isotope thermometry of quartz-calcite veins - Unraveling the thermal-tectonic history of the subgreenschist facies Morcles nappe (Swiss Alps)

Combined structural analysis and oxygen isotope thermometry of syntectonic quartz-calcite fibrous veins can be used to correlate the thermal history of deformed rocks,vith specific structural and tectonic events. Results are presented for the Mercies nappe in the western Helvetic Alps, Switzerland, where mineral parageneses, illite `'crystallinity,'' and fluid inclusion chemistry record an apparent peak metamorphic temperature gradient that increased across the Morcles nappe from anchizonal conditions in the foreland to epizonal conditions in its hinterland root zone. Twenty-seven quartz-calcite veins were analyzed in this study in order to determine the temperatures of veining during formation and deformation of the nappe, Peak metamorphic temperatures ranged from approximate to 260 to 290 degrees C in the shallower, foreland localities and to approximate to 330 to 350 degrees C in the deeper, more hinterland localities at the end of S1-foliation formation, related to large-scale folding. Temperatures gradually decreased throughout the nappe during subsequent development of the S2 foliation and S3 crenulation cleavage, Uplift and erosion of the overlying nappe pile resulted in slow cooling of the Morcles nappe during the waning stages of the Alpine Orogeny. The dominant foliation-forming deformation of the Morcles nappe occurred at elevated temperatures over the course of 10 to 15 Ma. Combined structure-oxygen isotope analyses of quartz-calcite veins yield better temperature and temporal constraints on the thermal histories of subgreenschist vein-bearing tectonites than do other geothermometers.

Rift-related inheritance in orogens: a case study from the Austroalpine nappes in Central Alps (SE-Switzerland and N-Italy)

The Austroalpine nappe systems in SE-Switzerland and N-Italy preserve remnants of the Adriatic rifted margin. Based on new maps and cross-sections, we suggest that the complex structure of the Campo, Grosina/Languard, and Bernina nappes is inherited largely from Jurassic rifting. We propose a classification of the Austroalpine domain into Upper, Middle and Lower Austroalpine nappes that is new because it is based primarily on the rift-related Jurassic structure and paleogeography of these nappes. Based on the Alpine structures and pre-Alpine, rift-related geometry of the Lower (Bernina) and Middle (Campo, Grosina/Languard) Austroalpine nappes, we restore these nappes to their original positions along the former margin, as a means of understanding the formation and emplacement of the nappes during initial reactivation of the Alpine Tethyan margin. The Campo and Grosina/Languard nappes can be interpreted as remnants of a former necking zone that comprised pre-rift upper and middle crust. These nappes were juxtaposed with the Mesozoic cover of the Bernina nappe during Jurassic rifting. We find evidence for low-angle detachment faults and extensional allochthons in the Bernina nappe similar to those previously described in the Err nappe and explain their role during subsequent reactivation. Our observations reveal a strong control of rift-related structures during the subsequent Alpine reactivation on all scales of the former distal margin. Two zones of intense deformation, referred to as the Albula-Zebru and Lunghin-Mortirolo movement zones, have been reactivated during Alpine deformation and cannot be described as simple monophase faults or shear zones. We propose a tectonic model for the Austroalpine nappe systems that link inherited, rift-related structures with present-day Alpine structures. In conclusion, we believe that apart from the direct regional implications, the results of this paper are of general interest in understanding the control of rift structures during reactivation of distal-rifted margins.

Structure and kinematics of the Siviez-Mischabel nappe in the Mattertal (western Alps of Switzerland) = Structure et cinématique de la nappe de Siviez-Mischabel le long de la vallée de Zermatt (Alpes de Suisse occidentale)

Résumé Cette étude porte sur le flanc inverse de la nappe de Siviez-Mischabel et sur les unités tectoniques sous jacentes (zone de Stalden supérieur et zone Houillère) dans la vallée menant à Zermatt. L'étude structurale du granite permien de Randa (orthogneiss oeillé) permet de mieux comprendre les effets de la déformation alpine sur les roches de socle. La cartographie détaillée de l'orthogneiss et de son encaissant, ainsi que l'étude lithostratigraphique des terrains sédimentaires associés permettent de proposer un schéma structural et cinématique du flanc inverse de la nappe de Siviez-Mischabel et de mieux comprendre ses relations avec les unités tectoniques sous-jacentes. L'analyse structurale de l'orthogneiss de Randa et de son encaissant révèle la superposition de plusieurs phases de déformation ductile. Cet orthogneiss formé sous des conditions métamorphiques du faciès schiste vert possède une forte schistosité alpine avec au moins deux linéations d'extension. La première, L1, orientée NW-SE est associée à la mise en place de la nappe. La seconde, L2, orientée SW-NE, se corrèle au cisaillement ductile du Simplon. La quantification de la déformation au moyen de la méthode de Fry sur les faciès porphyriques donne des ellipses à rapports axiaux compris entre 1.9 et 5.3, en accord avec les valeurs obtenues par d'autres marqueurs {tourmalines étirées, fibres). Les valeurs mesurées parallèlement à L1 ou L2 sont très semblables. La méthode de Fry a nécessité une étude théorique préalable afin de vérifier son applicabilité aux orthogneiss oeillés. La méthode requiert une distribution spatiale homogène et isotrope des marqueurs utilisés. Les tests statistiques effectués ont révélé que les phénocristaux de feldspath alcalin satisfont à cette condition et qu'ils peuvent être utilisés comme marqueur de la déformation au moyen de la méthode de Fry. Les valeurs obtenues révèlent l'importance du cisaillement ductile du Simplon sur la géométrie de la nappe dans la région d'étude. Le levé cartographique a permis d'améliorer la lithostratigraphie de la base de la nappe de Siviez-Mischabel. Trois formations en position renversée peuvent être observées sous les gneiss formant le coeur de la nappe. Ces trois formations forment le coeur du synclinal de St-Niklaus qui connecte la nappe de Siviez-Mischabel à la zone de Stalden supérieur. La datation par U-Pb de zircons détritiques et magmatiques par LA-ICP-MS permet de contraindre l'âge des formations observées (probablement Carbonifère à Trias précoce). Ces données ont des répercussions importantes sur la structure de la nappe dans la région, prouvant l'existence de plusieurs plis avec des séries normales et renversées bien préservées. La définition et la datation de ces formations, ainsi que leur identification dans la-Zone- Houillère avoisinante permettent de mieux comprendre la géométrie initiale et les relations tectoniques des nappes du Pennique moyen dans la vallée de Zermatt. Summary This study investigates the overturned limb of the Siviez-Mischabel nappe and underlying tectonic units (Upper Stalden zone and Houillère zone) in the Mattertal area. Detailed structural analysis in the Permian Randa granite (augen orthogneiss) allows a better understanding of the Alpine deformation effects on basement rocks. Detailed mapping of this orthogneiss and surrounding rocks, and the study of the lithostratigraphy in the related sedimentary horizons allow the proposition of a structural and kinematic model for the overturned limb of the Siviez-Mischabel and to better understand the relations with the underlying tectonic units. The structural analysis of the Randa orthogneiss and surrounding rocks revealed the superposition of several phases of ductile deformation. This orthogneiss formed under greenschist facies metamorphic conditions displays a strong Alpine foliation with at least two stretching lineations. The first lineation, L1, is oriented NW-SE and is related to the nappe emplacement northward. The second one, L2, is related to the Simplon ductile shear zone. Strain estimation using the Fry method has been performed on porphyritic facies of the Randa orthogneiss. The obtained ellipses have axial ratios varying between 1.9 and 5.3, in agreement with strain estimation obtained from other markers (stretched turmalines, fringes). The strain values are very similar if measured parallel to L1 or to L2. A theoretical approach was necessary to verify the relevant application of the Fry method to augen orthogneiss. This method requires that the distribution of the used markers has to be homogeneous and isotropic. Statistical tests have been done and revealed that K-feldspar phenocrysts satisfy these conditions and can be used as strain markers with the Fry method. The obtained strain measurements revealed the importance of the Simplon ductile shear zone on the geometry of the nappe in the studied area. Mapping has improved the lithostratigraphy at the base of the Siviez-Mischabel nappe. Three overturned formations can be observed below the gneisses forming the core of the nappe. These three formations form the St-Niklaus syncline, which connects the Siviez-Mischabel nappe to the underlying Upper Stalden zone. U-Pb dating of detrital and magmatic zircons by LA-ICPMS allowed the age of the observed formations to be constrained (presumably Carboniferous to Early Triassic). This data has critical implications for nappe structure in the region, composed of few recumbent folds with well preserved normal and overturned limbs. The definition and dating of these formations, as well as their identification in the adjacent "Houillère Zone" improve the understanding of the geometry and tectonic relations of the Middle Penninic nappes in the Mattertal.

Molecular dating of caprines using ancient DNA sequences of Myotragus balearicus, an extinct endemic Balearic mammal

Background: Myotragus balearicus was an endemic bovid from the Balearic Islands (Western Mediterranean) that became extinct around 6,000-4,000 years ago. The Myotragus evolutionary lineage became isolated in the islands most probably at the end of the Messinian crisis, when the desiccation of the Mediterranean ended, in a geological date established at 5.35 Mya. Thus, the sequences of Myotragus could be very valuable for calibrating the mammalian mitochondrial DNA clock and, in particular, the tree of the Caprinae subfamily, to which Myotragus belongs. Results: We have retrieved the complete mitochondrial cytochrome b gene (1,143 base pairs), plus fragments of the mitochondrial 12S gene and the nuclear 28S rDNA multi-copy gene from a well preserved Myotragus subfossil bone. The best resolved phylogenetic trees, obtained with the cytochrome b gene, placed Myotragus in a position basal to the Ovis group. Using the calibration provided by the isolation of Balearic Islands, we calculated that the initial radiation of caprines can be dated at 6.2 ± 0.4 Mya. In addition, alpine and southern chamois, considered until recently the same species, split around 1.6 ± 0.3 Mya, indicating that the two chamois species have been separated much longer than previously thought. Conclusion: Since there are almost no extant endemic mammals in Mediterranean islands, the sequence of the extinct Balearic endemic Myotragus has been crucial for allowing us to use the Messinian crisis calibration point for dating the caprines phylogenetic tree.

Spatial prediction of monthly wind speeds in complex terrain with adaptive general regression neural networks

This paper presents the general regression neural networks (GRNN) as a nonlinear regression method for the interpolation of monthly wind speeds in complex Alpine orography. GRNN is trained using data coming from Swiss meteorological networks to learn the statistical relationship between topographic features and wind speed. The terrain convexity, slope and exposure are considered by extracting features from the digital elevation model at different spatial scales using specialised convolution filters. A database of gridded monthly wind speeds is then constructed by applying GRNN in prediction mode during the period 1968-2008. This study demonstrates that using topographic features as inputs in GRNN significantly reduces cross-validation errors with respect to low-dimensional models integrating only geographical coordinates and terrain height for the interpolation of wind speed. The spatial predictability of wind speed is found to be lower in summer than in winter due to more complex and weaker wind-topography relationships. The relevance of these relationships is studied using an adaptive version of the GRNN algorithm which allows to select the useful terrain features by eliminating the noisy ones. This research provides a framework for extending the low-dimensional interpolation models to high-dimensional spaces by integrating additional features accounting for the topographic conditions at multiple spatial scales. Copyright (c) 2012 Royal Meteorological Society.

Ecological-niche factor analysis: how to compute habitat-suitability maps without absence data?

We propose a multivariate approach to the study of geographic species distribution which does not require absence data. Building on Hutchinson's concept of the ecological niche, this factor analysis compares, in the multidimensional space of ecological variables, the distribution of the localities where the focal species was observed to a reference set describing the whole study area. The first factor extracted maximizes the marginality of the focal species, defined as the ecological distance between the species optimum and the mean habitat within the reference area. The other factors maximize the specialization of this focal species, defined as the ratio of the ecological variance in mean habitat to that observed for the focal species. Eigenvectors and eigenvalues are readily interpreted and can be used to build habitat-suitability maps. This approach is recommended in Situations where absence data are not available (many data banks), unreliable (most cryptic or rare species), or meaningless (invaders). We provide an illustration and validation of the method for the alpine ibex, a species reintroduced in Switzerland which presumably has not yet recolonized its entire range.

Real-time quantitative PCR assay for measurement of bird telomeres

We present the application of a real-time quantitative PCR assay, previously developed to measure relative telomere length in humans and mice, to two bird species, the zebra finch Taeniopygia guttata and the Alpine swift Apus melba. This technique is based on the PCR amplification of telomeric (TTAGGG)(n) sequences using specific oligonucleotide primers. Relative telomere length is expressed as the ratio (T/S) of telomere repeat copy number (T) to control single gene copy number (S). This method is particularly useful for comparisons of individuals within species, or where the same individuals are followed longitudinally. We used glyceraldehyde-3-phosphate dehydrogenase (GAPDH) as a single control gene. In both species, we validated our PCR measurements of relative telomere length against absolute measurements of telomere length determined by the conventional method of quantifying telomere terminal restriction fragment (TRF) lengths using both the traditional Southern blot analysis (Alpine swifts) and in gel hybridization (zebra finches). As found in humans and mice, telomere lengths in the same sample measured by TRF and PCR were well correlated in both the Alpine swift and the zebra finch.. Hence, this PCR assay for measurement of bird telomeres, which is fast and requires only small amounts of genomic DNA, should open new avenues in the study of environmental factors influencing variation in telomere length, and how this variation translates into variation in cellular and whole organism senescence.

Tracing of the Rhône River, wastewater, and mixing within Lake Geneva : stable isotope compositions of water and dissolved inorganic carbon

This study presents an evaluation of the stable isotopic composition of water (hydrogen and oxygen) and dissolved inorganic carbon (DIC) of Lake Geneva, a deep, peri-alpine lake situated at the border between Switzerland and France. The research goal is to apply vertical and seasonal variations of the isotope compositions to evaluate mixing processes of pollutants, nutrients and oxygen. Depth profiles were sampled at different locations throughout Lake Geneva on a monthly and seasonal basis over the course of three years (2009-2011). The results of the oxygen isotopic composition indicate a Rhône River interflow, which can be traced for about 55 km throughout the lake during summer. The Rhône River interflow is 7 to 15 m thick and the molar fraction of Rhône water is estimated to amount up to 37 %. Calculated density of the water and measured isotopic compositions demonstrate that the interflow depth changes in conjunction with the density gradient in the water column during fall. Partial pressure of CO2 indicates that the epilimnion is taking up CO2 from the atmosphere between spring and fall. The epilimnion is most enriched in 13CDIC in September and a progressive depletion of 13CDIC can be observed in the metalimnion from spring to late fall. This stratification is dependent on the local density stratification and the results demonstrate that parameters, which are indicating photosynthesis, are not necessarily linked to δ13CDIC values. In addition, the amount of primary production shows a strong discrepancy between summer 2009 and 2010, but δ13CDIC values of the epilimnion and metalimnion do not indicate variations. In the hypolimnion of the deep lake δ13CDIC values are constant and the progressive depletion allows tracing remineralization processes. The combination of stable carbon and oxygen isotopic compositions allows furthermore tracing Rhône River water fractions, as well as wastewater, stormwater and anthropogenic induced carbon in the water column of the shallow Bay of Vidy. In combination with the results of measured micropollutants, the study underlines that concentrations of certain substances may be related to the Rhône River interflow and/or remineralization of particulate organic carbon. Water quality monitoring and research should therefore be extended to the metalimnion as well as sediment water interface.

Affections pulmonaires et altitude

De nos jours, un nombre croissant de personnes souffrant occasionnellement de pathologies pulmonaires désirent se rendre dans des régions d'altitude, et il n'est parfois pas aisé pour le médecin de prodiguer les conseils quant aux conséquences potentielles et à la conduite à tenir dans ces circonstances. Basé sur les connaissances physiopathologiques et quelques études cliniques, cet article aborde l'effet de l'altitude chez les patients souffrant de maladies pulmonaires et renseigne sur l'attitude à adopter, afin qu'un séjour sur les hauts plateaux ou simplement dans une station alpine se passe dans les meilleures conditions possibles.

Nappe geometry in the Western Swiss Alps

Detailed geological mapping during the last 20 years in the Western Swiss Alps has shown clearly that most of the lower basement nappes are fold nappes possessing normal and inverted limbs. Moreover their cores are made of strongly deformed gneisses indicating that important ductile strain took place during the formation of the fold nappes. It is therefore probably wrong to imagine deep basement nappes as rigid slices as often actually claimed, especially when interpreting seismic profiles. True `brittle type' thrust nappes involving basement rocks only occur in the internal and upper parts of the belt. Cover nappes, on the contrary, are in most parts of the Alpine belt thrust sheets following more or less the rules of thin-skinned tectonics. Many basement fold nappes lost part of their sedimentary cover during or just before their formation, by decollement along ductile horizons. The result is that many cover thrust nappes in the external part of the Alps are directly related to their original basement fold nappes.