A low-cost solution for the restoration of femoral head centre during total hip arthroplasty

Restoration of joint centre during total hip arthroplasty is critical. While computer-aided navigation can improve accuracy during total hip arthroplasty, its expense makes it inaccessible to the majority of surgeons. This article evaluates the use, in the laboratory, of a calliper with a simple computer application to measure changes in femoral head centres during total hip arthroplasty. The computer application was designed using Microsoft Excel and used calliper measurements taken pre- and post-femoral head resection to predict the change in head centre in terms of offset and vertical height between the femoral head and newly inserted prosthesis. Its accuracy was assessed using a coordinate measuring machine to compare changes in preoperative and post-operative head centre when simulating stem insertion on 10 sawbone femurs. A femoral stem with a modular neck was used, which meant nine possible head centre configurations were available for each femur, giving 90 results. The results show that using this technique during a simulated total hip arthroplasty, it was possible to restore femoral head centre to within 6?mm for offset (mean 1.67?±?1.16?mm) and vertical height (mean 2.14?±?1.51?mm). It is intended that this low-cost technique be extended to inform the surgeon of a best-fit solution in terms of neck length and neck type for a specific prosthesis.

The lived experience of patients receiving radiotherapy for head and neck cancer: A literature review

It is estimated that 60% of patients diagnosed with head and neck cancer will receive radiotherapy at some stage in their disease trajectory. The aim of this literature review was to find and analyse papers pertaining to the lived experiences of patients with head and neck cancer receiving radiotherapy. The review identified a limited number of high-quality research papers focusing on this topic, with only 10 papers fitting the inclusion/exclusion criteria. The majority of the investigative studies were not generalisable owing to small sample sizes and many of them being conducted in only one centre. However, the findings do highlight and contribute to the understanding of the lived experiences of this patient group and provide some insight into the unique physical, social, and psychological difficulties they encounter as a result of their treatment. There appears to be a need for further high-level research into these patients, particularly focusing on the provision of support and information prior to, during, and following radiotherapy. Further attention needs to be paid to preparing patients for the slow recovery following radiotherapy. Interventional studies are also required to develop clinical guidelines and protocols that can assist health professionals in meeting the holistic needs of this patient group.

An efficient Cu(II)-bis(oxazoline)-based polymer immobilised ionic liquid phase catalyst for asymmetric carbon–carbon bond formation

The asymmetric Diels-Alder reaction between N-acryloyloxazolidinone and cyclopentadiene and the Mukaiyama-aldol reaction between methylpyruvate and 1-phenyl-1-trimethylsilyloxyethene have been catalysed by heterogeneous copper(II)-bis(oxazoline)-based polymer immobilised ionic liquid phase (PIILP) systems generated from a range of linear and cross linked ionic polymers. In both reactions selectivity and ee were strongly influenced by the choice of polymer. A comparison of the performance of a range of Cu(II)-bis(oxazoline)-PIILP catalyst systems against analogous supported ionic liquid phase (SILP) heterogeneous catalysts as well as their homogeneous counterparts has been undertaken and their relative merits evaluated.

Influence of concrete composition on anchorage bond behavior of prestressing reinforcement

An experimental research addressing the effects of concrete composition and strength on anchorage bond behavior of prestressing reinforcement is presented to clarify the effect of material properties that have appeared contradictory in previous literature. Bond stresses and anchorage lengths have been obtained in twelve concrete mixes made up of different cement contents (C) – 350 to 500 kg/m3 – and water/cement (w/c) ratios – 0.3 to 0.5 – with compressive strength at 24 h ranging from 24 to 55 MPa. A testing technique based on measuring the prestressing force in specimens with different embedment lengths has been used. The results show that anchorage length increases when w/c increases, more significantly when C is higher; the effect of C reveals different trends based on w/c. The obtained anchorage bond stresses are greater for higher concrete compressive strength, and their average ratio of 1.45 with respect to transmission bond stresses implies a potential bond capacity.

Prevalence and Causes of Prescribing ErrorsL The PRescribing Outcomes for Trainee Doctors Engaged in Clinical Training (PROTECT) Study

Objectives: Study objectives were to investigate the prevalence and causes of prescribing errors amongst foundation doctors (i.e. junior doctors in their first (F1) or second (F2) year of post-graduate training), describe their knowledge and experience of prescribing errors, and explore their self-efficacy (i.e. confidence) in prescribing.

Method: A three-part mixed-methods design was used, comprising: prospective observational study; semi-structured interviews and cross-sectional survey. All doctors prescribing in eight purposively selected hospitals in Scotland participated. All foundation doctors throughout Scotland participated in the survey. The number of prescribing errors per patient, doctor, ward and hospital, perceived causes of errors and a measure of doctors’ self-efficacy were established.

Results: 4710 patient charts and 44,726 prescribed medicines were reviewed. There were 3364 errors, affecting 1700 (36.1%) charts (overall error rate: 7.5%; F1:7.4%; F2:8.6%; consultants:6.3%). Higher error rates were associated with : teaching hospitals (p,0.001), surgical (p = ,0.001) or mixed wards (0.008) rather thanmedical ward, higher patient turnover wards (p,0.001), a greater number of prescribed medicines (p,0.001) and the months December and June (p,0.001). One hundred errors were discussed in 40 interviews. Error causation was multi-factorial; work environment and team factors were particularly noted. Of 548 completed questionnaires (national response rate of 35.4%), 508 (92.7% of respondents) reported errors, most of which (328 (64.6%) did not reach the patient. Pressure from other staff, workload and interruptions were cited as the main causes of errors. Foundation year 2 doctors reported greater confidence than year 1 doctors in deciding the most appropriate medication regimen.

Conclusions: Prescribing errors are frequent and of complex causation. Foundation doctors made more errors than other doctors, but undertook the majority of prescribing, making them a key target for intervention. Contributing causes included work environment, team, task, individual and patient factors. Further work is needed to develop and assess interventions that address these.

Evaluation of sources of uncertainties in microtensile bond strength of dental adhesive system for different specimen geometries

Objective: The aim of this research is to use finite element analysis (FEA) to quantify the effect of the sample shape and the imperfections induced during the manufacturing process of samples on the bond strength and modes of failure of dental adhesive systems through microtensile test. Using the FEA prediction for individual parameters effect, estimation of expected variation and spread of the microtensile bond strength results for different sample geometries is made. Methods: The estimated stress distributions for three different sample shapes, hourglass, stick and dumbbell predicted by FEA are used to predict the strength for different fracture modes. Parameters such as the adhesive thickness, uneven interface of the adhesive and composite and dentin, misalignment of axis of loading, the existence of flaws such as induced cracks during shaping the samples or bubbles created during application of the adhesive are considered. Microtensile experiments are performed simultaneously to measure bond strength and modes of failure. These are compared with the FEA results. Results: The relative bonding strength and its standard deviation for the specimens with different geometries measured through the microtensile tests confirm the findings of the FEA. The hourglass shape samples show lower tensile bond strength and standard deviation compared to the stick and dumbbell shape samples. ANOVA analysis confirms no significant difference between dumbbell and stick geometry results, and major differences of these two geometries compared to hourglass shape measured values. Induced flaws in the adhesive and misalignment of the angle of application of load have significant effect on the microtensile bond strength. Using adhesive with higher modulus the differences between the bond strength of the three sample geometries increase. Significance: The result of the research clarifies the importance of the sample geometry chosen in measuring the bond strength. It quantifies the effect of the imperfections on the bond strength for each of the sample geometries through a systematic and all embracing study. The results explain the reasons of the large spread of the microtensile test results reported by various researchers working in different labs and the need for standardization of the test method and sample shape used in evaluation of the dentin-adhesive bonding system. © 2007 Academy of Dental Materials.

Effective cutting of a quantum spin chain by bond impurities

Spin chains are promising media for short-haul quantum communication. Their usefulness is manifested in all those situations where stationary information carriers are involved. In the majority of the communication schemes relying on quantum spin chains, the latter are assumed to be finite in length, with well-addressable end-chain spins. In this paper we propose that such a configuration could actually be achieved by a mechanism that is able to effectively cut a spin ring through the insertion of bond defects. We then show how suitable physical quantities can be identified as figures of merit for the effectiveness of the cut. We find that, even for modest strengths of the bond defect, a ring is effectively cut at the defect site. In turn, this has important effects on the amount of correlations shared by the spins across the resulting chain, which we study by means of a scattering-based mechanism of a clear physical interpretation. © 2013 American Physical Society.

Scotland, Renewable Energy and the Independence Debate: Will Head or Heart Rule the Roost?

Political support for renewable energy development, especially offshore renewables, is particularly conspicuous in Scotland and is a centrepiece of SNP policy. However, this is built on something of a paradox because, put simply, without the subsidies paid by electricity consumers in the rest of the UK, the Scottish Government's ambitious targets for renewable energy would be politically unachievable. We argue in this paper that if Scotland does move towards independence, then there could be little reason for the UK to continue paying (much) of the subsidies since the resulting renewable generation would no longer contribute towards UK renewable energy targets. We suggest that the potential scenarios, and their implications, needs to be far better considered in the arguments around the Scottish constitutional position and the broader aims of UK energy policy.

The Routledge Guide to Interviewing: Oral History, Social Enquiry & Investigation

The Routledge Guide to Interviewing sets out a well-tested and practical approach and methodology: what works, difficulties and dangers to avoid and key questions which must be answered before you set out. Background methodological issues and arguments are considered and drawn upon but the focus is on what is ethical, legally acceptable and productive:
-Rationale (why, what for, where, how)
-Ethics and Legalities (informed consent, data protection, risks, embargoes)
-Resources (organisational, technical, intellectual)
-Preparation (selecting and approaching interviewees, background and biographical research, establishing credentials, identifying topics)
-Technique (developing expertise and confidence)
-Audio-visual interviews
-Analysis (modes, methods, difficulties)
-Storage (archiving and long-term preservation)
-Sharing Resources (dissemination and development)

From death row to the mansion of a head of state, small kitchens and front parlours, to legislatures and presbyteries, Anna Bryson and Seán McConville’s wide interviewing experience has been condensed into this book. The material set out here has been acquired by trial, error and reflection over a period of more than four decades. The interviewees have ranged from the delightfully straightforward to the painfully difficult to the near impossible – with a sprinkling of those that were impossible.
Successful interviewing draws on the survival skills of everyday life. This guide will help you to adapt, develop and apply these innate skills. Including a range of useful information such as sample waivers, internet resources, useful hints and checklists, it provides sound and plain-speaking support for the oral historian, social scientist and investigator.

A Prospective Cohort Study of Body Size and Risk of Head and Neck Cancers in the NIH-AARP Diet and Health Study

Background: The association between body size and head and neck cancers (HNCA) is unclear, partly because of the biases in case–control studies. Methods: In the prospective NIH–AARP cohort study, 218,854 participants (132,288 men and 86,566 women), aged 50 to 71 years, were cancer free at baseline (1995 and 1996), and had valid anthropometric data. Cox proportional hazards regression was used to examine the associations between body size and HNCA, adjusted for current and past smoking habits, alcohol intake, education, race, and fruit and vegetable consumption, and reported as HR and 95% confidence intervals (CI). Results: Until December 31, 2006, 779 incident HNCAs occurred: 342 in the oral cavity, 120 in the oro- and hypopharynx, 265 in the larynx, 12 in the nasopharynx, and 40 at overlapping sites. There was an inverse association between HNCA and body mass index, which was almost exclusively among current smokers (HR = 0.76 per each 5 U increase; 95% CI, 0.63–0.93), and diminished as initial years of follow-up were excluded. We observed a direct association with waist-to-hip ratio (HR = 1.16 per 0.1 U increase; 95% CI, 1.03–1.31), particularly for cancers of the oral cavity (HR, 1.40; 95% CI, 1.17–1.67). Height was also directly associated with total HNCAs (P = 0.02), and oro- and hypopharyngeal cancers (P < 0.01). Conclusions: The risk of HNCAs was associated inversely with leanness among current smokers, and directly with abdominal obesity and height. Impact: Our study provides evidence that the association between leanness and risk of HNCAs may be due to effect modification by smoking. Cancer Epidemiol Biomarkers Prev; 23(11); 2422–9. ©2014 AACR.