901 resultados para Washington State Liquor Control Board.
Resumo:
O presente estudo realiza uma análise sobre as funções de trabalho do Professor Coordenador Pedagógico da Rede Pública Estadual de Ensino, considerando os desafios e as contribuições da ação coordenadora e, principalmente, como esse profissional do ensino articula a formação continuada dos docentes e a sua própria formação como educador. As questões norteadoras da pesquisa são: 1. De que forma o Professor Coordenador Pedagógico consegue dar conta da formação dos docentes, durante as reuniões de HTPC Horário de Trabalho Pedagógico e Coletivo? 2.Como consegue cuidar de sua própria formação continuada, diante dos inúmeros entraves e obstáculos, das múltiplas resistências, dos conflitos, das emergências, dos imediatismos e da sobrecarga de trabalho, tendo em vista as relações interpessoais no seio da Escola? O trabalho analisa os pontos comuns e os diferenciais da ação coordenadora e a forma como ela interfere na construção de um ensino de melhor qualidade, bem como o papel do Professor Coordenador Pedagógico como mediador e articulador desse processo. Os referenciais teóricos que fundamentam esta pesquisa encontram-se no legado de Paulo Freire (1982a/1982b/1983/1991/1997/2000), com a reintegração das dimensões do homem que o fazem humano, pessoal e social, o compromisso do profissional com a Sociedade, a formação continuada; a conscientização e a mudança necessária em Educação; e de outros autores que tratam das temáticas que envolvem a Coordenação Pedagógica, formação de docentes, HTPC e relações interpessoais, como: Placco (2008), Vasconcellos (2010ª/2010b/2010c), Bruno (2008), Libâneo (1993), Rios (2001), Thurler (2002), Sergiovanni (1976), Teixeira (1977), Perrenoud (1999)/ Perrenoud et al. (2002), Nidelcoff (1983), Araújo(2002), entre outros. A pesquisa de campo, de cunho qualitativo e que pretende contribuir para o debate das questões da Educação Pública, foi realizada com Professores Coordenadores Pedagógicos de escolas estaduais da Diretoria de Ensino de Miracatu, região do Vale do Ribeira/SP, especificamente no município de Itariri, com a aplicação de questionário e realização de entrevistas de aprofundamento e os resultados apontam para o fato de que o Professor Coordenador Pedagógico consegue (ou não) exercer as atribuições que lhe são conferidas conforme forem as relações interpessoais estabelecidas no cotidiano escolar.
Resumo:
A method has been constructed for the solution of a wide range of chemical plant simulation models including differential equations and optimization. Double orthogonal collocation on finite elements is applied to convert the model into an NLP problem that is solved either by the VF 13AD package based on successive quadratic programming, or by the GRG2 package, based on the generalized reduced gradient method. This approach is termed simultaneous optimization and solution strategy. The objective functional can contain integral terms. The state and control variables can have time delays. Equalities and inequalities containing state and control variables can be included into the model as well as algebraic equations and inequalities. The maximum number of independent variables is 2. Problems containing 3 independent variables can be transformed into problems having 2 independent variables using finite differencing. The maximum number of NLP variables and constraints is 1500. The method is also suitable for solving ordinary and partial differential equations. The state functions are approximated by a linear combination of Lagrange interpolation polynomials. The control function can either be approximated by a linear combination of Lagrange interpolation polynomials or by a piecewise constant function over finite elements. The number of internal collocation points can vary by finite elements. The residual error is evaluated at arbitrarily chosen equidistant grid-points, thus enabling the user to check the accuracy of the solution between collocation points, where the solution is exact. The solution functions can be tabulated. There is an option to use control vector parameterization to solve optimization problems containing initial value ordinary differential equations. When there are many differential equations or the upper integration limit should be selected optimally then this approach should be used. The portability of the package has been addressed converting the package from V AX FORTRAN 77 into IBM PC FORTRAN 77 and into SUN SPARC 2000 FORTRAN 77. Computer runs have shown that the method can reproduce optimization problems published in the literature. The GRG2 and the VF I 3AD packages, integrated into the optimization package, proved to be robust and reliable. The package contains an executive module, a module performing control vector parameterization and 2 nonlinear problem solver modules, GRG2 and VF I 3AD. There is a stand-alone module that converts the differential-algebraic optimization problem into a nonlinear programming problem.
Resumo:
Certain aspects of advertising–especially on television–are not easily explained with conventional economic models. In particular, much of the imagery and repetitive thematic content seen in advertisements suggests it is "psychological" in nature, as opposed to "informative". To understand the economic rationale for incorporating such material, we develop a theory of preferences in which information about threshold payoffs induces sudden shifts in demand. These threshold payoffs are best understood in the context of human evolutionary history. Furthermore, the presence of threshold payoffs in consumer preferences gives firms incentive for providing threshold-type information. To examine the use of threshold-related content in television advertisements, we look for this con- tent in a sample of 370 television advertisements. We find considerable evidence that advertisers make strategic use of threshold-type content in television advertisements. Specifically, threshold-related content occurred in 83% of food and beverage advertisements for children and in 71% of advertisements for general audiences. Furthermore, the threshold-related content in children’s food and beverage advertisements occurred with statistically greater frequency than factual content, which isn’t true for food and beverage advertisements for general audiences.
Resumo:
During the remediation of burial grounds at the US Department of Energy's (DOE's) Hanford Site in Washington State, the dispersion of contaminated soil particles and dust is an issue that is faced by site workers on a daily basis. This contamination problem is even more of a concern when one takes into account the semi-arid characteristics of the region where the site is located. To mitigate this problem, workers at the site use a variety of engineered methods to minimize the dispersion of contaminated soil and dust (i.e. use of water and/or suppression agents that stabilizes the soil prior to soil excavation, segregation, and removal activities). A primary contributor to the dispersion of contaminated soil and dust is wind soil erosion. The erosion process occurs when the wind speed exceeds a certain threshold value which depends on a number of factors including wind force loading, particle size, surface soil moisture, and the geometry of the soil. Thus under these circumstances, the mobility of contaminated soil and generation and dispersion of particulate matter are significantly influenced by these parameters. This dependence of soil and dust movement on threshold shear velocity, fixative dilution and/or application rates, soil moisture content, and soil geometry were studied for Hanford's sandy soil through a series of wind tunnel experiments, laboratory experiments and theoretical analysis. In addition, the behavior of plutonium (Pu) powder contamination in the soil was studied by introducing a Pu simulant (cerium oxide). The results showed that soil dispersion and PM10 concentrations decreased with increasing soil moisture. Also, it was shown that the mobility of the soil was affected by increasing wind velocity. It was demonstrated that the use of fixative products greatly decreased the amount of soil and PM10 concentrations when exposed to varying wind conditions. In addition, it was shown that geometry of the soil sample affected the velocity profile and calculation of roughness surface coefficient when comparing round and flat soil samples. Finally, threshold shear velocities were calculated for soil with flat surface and their dependency on surface soil moisture was demonstrated. A theoretical framework was developed to explain these dependencies.
Resumo:
The humanity reached a time of unprecedented technological development. Science has achieved and continues to achieve technologies that allowed increasingly to understand the universe and the laws which govern it, and also try to coexist without destroying the planet we live on. One of the main challenges of the XXI century is to seek and increase new sources of clean energy, renewable and able to sustain our growth and lifestyle. It is the duty of every researcher engage and contribute in this race of energy. In this context, wind power presents itself as one of the great promises for the future of electricity generation . Despite being a bit older than other sources of renewable energy, wind power still presents a wide field for improvement. The development of new techniques for control of the generator along with the development of research laboratories specializing in wind generation are one of the key points to improve the performance, efficiency and reliability of the system. Appropriate control of back-to-back converter scheme allows wind turbines based on the doubly-fed induction generator to operate in the variable-speed mode, whose benefits include maximum power extraction, reactive power injection and mechanical stress reduction. The generator-side converter provides control of active and reactive power injected into the grid, whereas the grid-side converter provides control of the DC link voltage and bi-directional power flow. The conventional control structure uses PI controllers with feed-forward compensation of cross-coupling dq terms. This control technique is sensitive to model uncertainties and the compensation of dynamic dq terms results on a competing control strategy. Therefore, to overcome these problems, it is proposed in this thesis a robust internal model based state-feedback control structure in order to eliminate the cross-coupling terms and thereby improve the generator drive as well as its dynamic behavior during sudden changes in wind speed. It is compared the conventional control approach with the proposed control technique for DFIG wind turbine control under both steady and gust wind conditions. Moreover, it is also proposed in this thesis an wind turbine emulator, which was developed to recreate in laboratory a realistic condition and to submit the generator to several wind speed conditions.
Resumo:
Generation systems, using renewable sources, are becoming increasingly popular due to the need for increased use of electricity. Currently, renewables sources have a role to cooperate with conventional generation, due to the system limitation in delivering the required power, the need for reduction of unwanted effects from sources that use fossil fuels (pollution) and the difficulty of building new transmission and/or distribution lines. This cooperation takes place through distributed generation. Therefore, this work proposes a control strategy for the interconnection of a PV (Photovoltaic) system generation distributed with a three-phase power grid through a connection filter the type LCL. The compensation of power quality at point of common coupling (PCC) is performed ensuring that the mains supply or consume only active power and that his currents have low distorcion. Unlike traditional techniques which require schemes for harmonic detection, the technique performs the harmonic compensation without the use of this schemes, controlling the output currents of the system in an indirect way. So that there is effective control of the DC (Direct Current) bus voltage is used the robust controller mode dual DSMPI (Dual-Sliding Mode-Proportional Integral), that behaves as a sliding mode controller SM-PI (Sliding Mode-Proportional Integral) during the transition and like a conventional PI (Proportional Integral) in the steady-state. For control of current is used to repetitive control strategy, which are used double sequence controllers (DSC) tuned to the fundamental component, the fifth and seventh harmonic. The output phase current are aligned with the phase angle of the utility voltage vector obtained from the use of a SRF-PLL (Synchronous Reference Frame Phase-Locked-Loop). In order to obtain the maximum power from the PV array is used a MPPT (Maximum Power Point Tracking) algorithm without the need for adding sensors. Experimental results are presented to demonstrate the effectiveness of the proposed control system.
Resumo:
The delegation of public tasks to arm’s-length bodies remains a central feature of contemporary reform agendas within both developed and developing countries. The role and capacity of political and administrative principals (i.e. ministers and departments of state) to control the vast network of arm’s-length bodies for which they are formally responsible is therefore a critical issue within and beyond academe. In the run-up to the 2010 General Election in the United Kingdom, the ‘quango conundrum’ emerged as an important theme and all three major parties committed themselves to shift the balance of power back towards ministers and sponsor departments. This article presents the results of the first major research project to track and examine the subsequent reform process. It reveals a stark shift in internal control relationships from the pre-election ‘poor parenting’ model to a far tighter internal situation that is now the focus of complaints by arm’s-length bodies of micro-management. This shift in the balance of power and how it was achieved offers new insights into the interplay between different forms of governance and has significant theoretical and comparative relevance. Points for practitioners: For professionals working in the field of arm’s-length governance, the article offers three key insights. First, that a well-resourced core executive is critical to directing reform given the challenges of implementing reform in a context of austerity. Second, that those implementing reform will also need to take into account the diverse consequences of centrally imposed reform likely to result in different departments with different approaches to arm’s-length governance. Third, that reforming arm’s-length governance can affect the quality of relationships, and those working in the field will need to mitigate these less tangible challenges to ensure success.
Resumo:
In this report, I present trace element data for basement samples at Ocean Drilling Program (ODP) Site 1256. The samples analyzed represent a subset of the group ("pool") samples from ODP Leg 206, and these trace element data are part of a more comprehensive data suite for the same samples, with analyses of stable and radiogenic isotopes (e.g., Sr, Li, and O) in progress or recently completed that will be presented elsewhere. The trace element analyses were performed in the GeoAnalytical Lab at Washington State University. The following elements were analyzed: La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Ba, Th, Nb, Y, Hf, Ta, U, Pb, Rb, Cs, Sr, Sc, and Zr. Trace element data indicate that the igneous basement at Site 1256 is geochemically normal mid-ocean-ridge basalt. A massive ponded flow sampled in both Holes 1256C and 1256D is distinguished by higher abundances of rare earth elements (REE) and most of the other trace elements analyzed. One interval of highly altered basalt has significantly higher concentrations of Cs, Rb, and Ba and lower concentrations of Sr, Pb, Zr, Hf, Sc, and most REE than the samples of background alteration or halos. No correlation is obvious between trace element abundance and macroscopic type of alteration within the background alteration or halos.
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-07
Resumo:
Thesis (Master's)--University of Washington, 2016-06
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-08
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-08
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-08
Resumo:
Thesis (Master's)--University of Washington, 2016-08
Resumo:
Mode of access: Internet.