Incorporation of PbF2 into Heavy Metal Oxide Borate Glasses. Structural Studies by Solid State NMR

A series of heavy metal oxide (HMO) glasses with composition 26.66B(2)O(3)-16GeO(2)-4 Bi2O3-(53.33-x)PbO-xPbF2 (0 <= x <= 40) were prepared and characterized with respect to their bulk (glass transition and crystallization temperatures, densities, molar volumes) and spectroscopic properties. Homogeneous glasses are formed up to x = 30, while crystallization of beta-PbF2 takes place at higher contents. Substitution of PbO by PbF2 shifts the optical band gap toward higher energies, thereby extending the UV transmission window significantly toward higher frequencies. Raman and infrared absorption spectra can be interpreted in conjunction with published reference data. Using B-11 and F-19 high-resolution solid state NMR as well as B-11/F-19 double resonance methodologies, we develop a quantitative structural description of this material. The fraction of four-coordinate boron is found to be moderately higher compared to that in glasses with the same PbO/B2O3 ratios, suggesting some participation of PbF2 in the network transformation process. This suggestion is confirmed by the F-19 NMR spectra. While the majority of the fluoride ions is present as ionic fluoride, similar to 20% of the fluorine inventory acts as a network modifier, resulting in the formation of four-coordinate BO3/2F- units. These units can be identified by F-19{B-11} rotational echo double resonance and B-11{F-19} cross-polarization magic angle spinning (CPMAS) data. These results provide the first unambiguous evidence of B-F bonding in a PbF2-modified glass system. The majority of the fluoride ions are found in a lead-dominated environment. F-19-F-19 homonuclear dipolar second moments measured by spin echo decay spectroscopy are quantitatively consistent with a model in which these ions are randomly distributed within the network modifier subdomain consisting of PbO, Bi2O3, and PbF2. This model, which implies both the features of atomic scale mixing with the network former borate species and some degree of fluoride ion clustering is consistent with all of the experimental data obtained on these glasses.

Cellular Infiltrates and NF kappa B Subunit c-Rel Signaling in Kidney Allografts of Patients With Clinical Operational Tolerance

Background. Nuclear factor kappa B (NF kappa B) plays a potential role in tolerance by orchestrating onset and resolution of inflammation and regulatory T cell differentiation through subunit c-Rel. We characterized cellular infiltrates and expression of NF kappa B1, c-Rel and its upstream regulators phosphatidylinositol 3-kinase/RAC-alpha serine/threonine kinase, in allograft biopsies from patients with spontaneous clinical operational tolerance (COT). Methods. Paraffin-fixed kidney allograft biopsies from 40 patients with COT (n=4), interstitial rejection (IR; n=12), borderline changes (BC; n=12), and long-term allograft function without rejection (NR; n=12) were used in the study. Cellular infiltrates and immunohistochemical expression of key proteins of the NF kappa B pathway were evaluated in the cortical tubulointerstitium and in cellular infiltrates using digital image analysis software. Results were given as mean +/- SEM. Results. Biopsies from patients with COT exhibited a comparable amount of cellular infiltrate to IR, BC, and NR (COT, 191 +/- 81; IR, 291 +/- 62; BC, 178 +/- 45; and NR, 210 +/- 42 cells/mm(2)) but a significantly higher proportion of forkhead box P3-positive cells (COT, 11%+/- 1.7%; IR, 3.5%+/- 0.70%; BC, 3.4%+/- 0.57%; and NR, 3.7%+/- 0.78% of infiltrating cells; P=0.02). c-Rel expression in cellular infiltrates was significantly elevated in IR, BC, and NR when analyzing the number of positive cells per mm(2) (P=0.02) and positive cells per infiltrating cells (P=0.04). In contrast, tubular PI3K and c-Rel expression were significantly higher in IR and BC but not in NR compared with COT (P=0.03 and P=0.006, respectively). With RAC-alpha serine-threonine kinase, similar tendencies were observed (P=0.2). Conclusions. Allografts from COT patients show significant cellular infiltrates but a distinct expression of proteins involved in the NF kappa B pathway and a higher proportion of forkhead box P3-positive cells.

Acute Cardiorespiratory and Metabolic Responses During Resistance Exercise in the Lactate Threshold Intensity

The aims were both to determine lactate and ventilatory threshold during incremental resistance training and to analyze the acute cardiorespiratory and metabolic responses during constant-load resistance exercise at lactate threshold (LT) intensity. Ten healthy men performed 2 protocols on leg press machine. The incremental test was performed to determine the lactate and ventilatory thresholds through an algorithmic adjustment method. After 48 h, a constant-load exercise at LT intensity was executed. The intensity of LT and ventilatory threshold was 27.1 +/- 3.7 and 30.3 +/- 7.9% of 1RM, respectively (P=0.142). During the constant-load resistance exercise, no significant variation was observed between set 9 and set 15 for blood lactate concentration (3.3 +/- 0.9 and 4.1 +/- 1.4 mmol.L-1, respectively. P=0.166) and BORG scale (11.5 +/- 2.9 and 13.0 +/- 3.5, respectively. P=0.783). No significant variation was observed between set 6 and set 15 for minute ventilation (19.4 +/- 4.9 and 22.4 +/- 5.5L. min(-1), respectively. P=0.091) and between S3 and S15 for VO2 (0.77 +/- 0.18 and 0.83 +/- 0.16L. min(-1), respectively. P=1.0). Constant-load resistance exercise at LT intensity corresponds to a steady state of ventilatory, cardio-metabolic parameters and ratings of perceived exertion.

Measurement of the Cross Section for Electromagnetic Dissociation with Neutron Emission in Pb-Pb Collisions at root s(NN)=2.76 TeV

The first measurement of neutron emission in electromagnetic dissociation of Pb-208 nuclei at the LHC is presented. The measurement is performed using the neutron zero degree calorimeters of the ALICE experiment, which detect neutral particles close to beam rapidity. The measured cross sections of single and mutual electromagnetic dissociation of Pb nuclei at root s(NN) = 2.76 TeV with neutron emission are sigma(singleEMD) = 187.4 +/- 0.2(stat)(-11.2)(+13.2) (syst) b and sigma(mutualEMD) = 5. 7 +/- 0.1(stat) +/- 0.4(syst) b, respectively. The experimental results are compared to the predictions from a relativistic electromagnetic dissociation model. DOI: 10.1103/PhysRevLett.109.252302

Epidemiological, parasitological and molecular aspects of Giardia duodenalis infection in children attending public daycare centers in southeastern Brazil

The purpose of this study was to determine the prevalence, associated risk factors and genotype of Giardia duodenalis infection in children attending public daycare centers in the city of Araguari, state of Minas Gerais, Brazil. Fecal samples were collected from 245 children aged 0-5 years, and questionnaires were asked about sociodemographic and hygiene-related characteristics. At the daycare centers where children tested positive, fecal samples were collected from the staff handling food, and from family members and domestic animals. Positive samples were analyzed at the dehydrogenase glutamate (gdh) locus to determine the genotype. The prevalence of G. duodenalis was 51.8%, and drinking unfiltered and unboiled water (OR 2.12, CI 1.26-3.69, p<0.001) and washing hands only with water (OR 2.14, Cl 1.19-4.04, p<0.001) were related risk factors. No association was found between test-positive children anti their family members, domestic animals and food handlers. An analysis of the sequences of 30 samples revealed that they all belonged to genotype B. (C) 2012 Royal Society of Tropical Medicine and Hygiene. Published by Elsevier Ltd. All rights reserved.

PtSnIr/C anode electrocatalysts: promoting effect in direct ethanol fuel cells

This study investigates the promoting effect of PtSnIr/C (1:1:1) electrocatalyst anode, prepared by polymeric precursor method, on the ethanol oxidation reaction in a direct ethanol fuel cell (DEFC). All of the materials used were 20% metal m/m on carbon. X-ray photoelectron spectroscopy (XPS) analysis showed the presence of Pt, PtOH2, PtO2, SnO2 and IrO2 at the electrocatalyst surface, indicating a possible decorated particle structure. X-ray diffractometry (XRD) analysis indicated metallic Pt and Ir as well as the formation of an alloy with Sn. Using the PtSnIr/C electrocatalyst prepared here with two times lower loading of Pt than PtSn/C E-tek electrocatalyst, it was possible to obtain the same maximum power density found for the commercial material. The main reaction product was acetic acid probably due to the presence of oxides, in this point the bifunctional mechanism is predominant, but an electronic effect should not be discarded.

Indagine delle proprietà statistiche di serie temporali di posizione applicata al caso della stazione permanente GPS della base Mario Zucchelli in Terra Vittoria (Antartide)

Da ormai sette anni la stazione permanente GPS di Baia Terranova acquisisce dati giornalieri che opportunamente elaborati consentono di contribuire alla comprensione della dinamica antartica e a verificare se modelli globali di natura geofisica siano aderenti all’area di interesse della stazione GPS permanente. Da ricerche bibliografiche condotte si è dedotto che una serie GPS presenta molteplici possibili perturbazioni principalmente dovute a errori nella modellizzazione di alcuni dati ancillari necessari al processamento. Non solo, da alcune analisi svolte, è emerso come tali serie temporali ricavate da rilievi geodetici, siano afflitte da differenti tipologie di rumore che possono alterare, se non opportunamente considerate, i parametri di interesse per le interpretazioni geofisiche del dato. Il lavoro di tesi consiste nel comprendere in che misura tali errori, possano incidere sui parametri dinamici che caratterizzano il moto della stazione permanente, facendo particolare riferimento alla velocità del punto sul quale la stazione è installata e sugli eventuali segnali periodici che possono essere individuati.

Longitudinal bar buckling behavior

Reinforced concrete columns might fail because of buckling of the longitudinal reinforcing bar when exposed to earthquake motions. Depending on the hoop stiffness and the length-over-diameter ratio, the instability can be local (in between two subsequent hoops) or global (the buckling length comprises several hoop spacings). To get insight into the topic, an extensive literary research of 19 existing models has been carried out including different approaches and assumptions which yield different results. Finite element fiberanalysis was carried out to study the local buckling behavior with varying length-over-diameter and initial imperfection-over-diameter ratios. The comparison of the analytical results with some experimental results shows good agreement before the post buckling behavior undergoes large deformation. Furthermore, different global buckling analysis cases were run considering the influence of different parameters; for certain hoop stiffnesses and length-over-diameter ratios local buckling was encountered. A parametric study yields an adimensional critical stress in function of a stiffness ratio characterized by the reinforcement configuration. Colonne in cemento armato possono collassare per via dell’instabilità dell’armatura longitudinale se sottoposte all’azione di un sisma. In funzione della rigidezza dei ferri trasversali e del rapporto lunghezza d���inflessione-diametro, l’instabilità può essere locale (fra due staffe adiacenti) o globale (la lunghezza d���instabilità comprende alcune staffe). Per introdurre alla materia, è proposta un’esauriente ricerca bibliografica di 19 modelli esistenti che include approcci e ipotesi differenti che portano a risultati distinti. Tramite un’analisi a fibre e elementi finiti si è studiata l’instabilità locale con vari rapporti lunghezza d���inflessione-diametro e imperfezione iniziale-diametro. Il confronto dei risultati analitici con quelli sperimentali mostra una buona coincidenza fino al raggiungimento di grandi spostamenti. Inoltre, il caso d’instabilità globale è stato simulato valutando l’influenza di vari parametri; per certe configurazioni di rigidezza delle staffe e lunghezza d���inflessione-diametro si hanno ottenuto casi di instabilità locale. Uno studio parametrico ha permesso di ottenere un carico critico adimensionale in funzione del rapporto di rigidezza dato dalle caratteristiche dell’armatura.

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Interazioni tra le glicoproteine D, B, H ed L critiche per la fusione indotta dal virus Herpes simplex

Four glycoproteins (gD, gB, gH, and gL) are required for herpes simplex virus (HSV) entry into the cell and for cell-cell fusion in transfected cells. gD serves as the receptor-binding glycoprotein and as the trigger of fusion; the other three glycoproteins execute fusion between the viral envelope and the plasma or endocytic membranes. Little is known on the interaction of gD with gB, gH, and gL. Here, the interactions between herpes simplex virus gD and its nectin1 receptor or between gD, gB, and gH were analyzed by complementation of the N and C portions of split enhanced green fluorescent protein (EGFP) fused to the glycoproteins. Split EGFP complementation was detected between proteins designated gDN + gHC, gDN + gBC, and gHN + gBC + wtgD, both in cells transfected with two or tree glycoproteins and in cells transfected with the four glycoproteins, commited to form syncytia. The in situ assay provides evidence that gD interacts with gH and gB independently one of the other. We further document the interaction between gH and gB. To elucidate which portions of the glycoproteins interact with each other we generated mutants of gD and gB. gD triggers fusion through a specialised domain, named pro-fusion domain (PFD), located C-terminally in the ectodomain. Here, we show that PFD is made of subdomains 1 and 2 (amino acids 260–285 and 285–310) and that each one partially contributed to herpes simplex virus infectivity. Chimeric gB molecules composed of HSV and human herpesvirus 8 (HHV8) sequences failed to reach the cell surface and to complement a gB defective virus. By means of pull down experiments we analyzed the interactions of HSV-HHV8 gB chimeras with gH or gD fused to the strep-tag. The gB sequence between aa residues 219-360 was identified as putative region of interaction with gH or critical to the interaction.

Experimentelle Untersuchungen zur embryonalen Entwicklung identifizierter Vorläuferzellen des zentralen Nervensystems von Drosophila melanogaster

Zusammenfassung Das ventrale Nervensystem (vNS) von Drosophila melanogaster entsteht aus zwei verschiedenen Populationen von Vorläufern, den mesektodermalen oder Mittellinien (ML)-Vorläufern und den neuroektodermalen Vorläufern oder Neuroblasten (NBs). Beide Populationen unterscheiden sich in vielen Aspekten, wie z.B. Genexpression, Teilungsverhalten und Zellstammbaum. Die ca. 30 NBs pro Hemisegment delaminieren als Einzelzellen aus dem Neuroektoderm und bilden ein invariantes subepidermales Muster in der neu entstandenen neuralen Zellschicht aus. Sie sind dort aufgrund ihrer Lage und der Expression spezifischer molekularer Marker individuell identifizierbar. Um die Mechanismen zu verstehen, die zur Determination und Differenzierung von ZNS Zellen führen, ist es eine Grundvoraussetzung, die Zellstammbäume aller Vorläufer zu kennen. Unter Verwendung des lipophilen in vivo Fluoreszenzfarbstoffs DiI wurden in früheren Arbeiten die Zellstammbäume der ML-Vorläufer und von 17 NBs, die aus der ventralen Hälfte des Neuroektoderms stammten, beschrieben. In der hier vorgelegten Arbeit wurden die Zellstammbäume von 13 NBs, die aus dem dorsalen Teil des Neuroektoderms delaminierten, beschrieben und 12 davon identifizierten Vorläufern zugeordnet. Darüber hinaus wurde ein bisher nicht beschriebener NB (NB 1-3) identifiziert und anhand morphologischer und molekularer Kriterien charakterisiert. Insgesamt produzierten die NBs ca. 120 Neurone und 22 bis 27 Gliazellen pro Hemineuromer, die in eine systematische Terminologie eingefügt wurden. Insgesamt besteht damit ein Neuromer des embryonalen vNS von Drosophila aus ca. 700 Neuronen (350 pro Hemineuromer) und 60 Gliazellen (30 pro Hemineuromer), die von NBs abstammen. Hinzu kommen ca. 12 ML-Neurone und 2 bis 4 ML-Glia pro Neuromer. Damit stammten die meisten Gliazellen im embryonalen vNS von Drosophila von NBs ab, die aus dem dorsalen Neuroektoderm hervorgingen. Zwei dieser NBs hatten ausschließlich gliale Nachkommen (NB 6-4A, GP) und fünf generierten sowohl Glia als auch Neurone (NBs 1-3, 2-5, 5-6, 6-4T, 7-4). Die übrigen sieben Zellstammbäume (NBs 2-4, 3-3, 3-5, 4-3, 4-4, 5-4, Klon y) waren rein neuronal. Es war ferner möglich, das bereits bekannte laterale Cluster von even-skipped exprimierenden Zellen (EL) dem Stammbaum von NB 3-3 zuzuordnen. Zusammen mit den zuvor beschriebenen Klonen sind damit mehr als 90% der thorakalen und abdominalen Zellstammbäume im embryonalen vNS von Drosophila bekannt. Darüber hinaus sind zuvor identifizierte Neurone und die meisten Gliazellen einem bestimmten Stammbaum zugeordnet und damit mit einer ontogenetischen Geschichte versehen. Dieser komplette Datensatz liefert eine Grundlage für die Interpretation mutanter Phänotypen und für zukünftige Untersuchungen über die Festlegung von Zellschicksalen und die Differenzierung von Zellen. Dies könnte dazu beitragen, das Verhältnis zwischen Herkunft der Zelle, Genexpression und Zellfunktion besser zu verstehen. Die wesentliche Funktion neuronaler Zellen ist die Integration und Weiterleitung von elektrischen Signalen. Mithin ist die Ausbildung elektrischer Eigenschaften (Elektrogenese) ein wesentlicher Aspekt der neuronalen Entwicklung. Um dabei zelltypspezifische Unterschiede zu finden, ist die Arbeit an definierten Zellpopulationen eine zwingende Voraussetzung. Es wurde daher hier ein in vitro System verwendet, das die selektive Kultivierung identifizierter embryonaler Vorläufer unter verschiedenen Bedingungen erlaubt. Da die Zellstammbäume der ML-Vorläufer besonders einfach sind und die ML-Zellen zudem in vielen Aspekten von den neuroektodermalen Zellen verschieden sind (s.o.), wurden die ML-Neurone als erstes Modellsystem ausgewählt. Unter Verwendung der Patch-clamp Technik wurden die in dieser definierten Zellpopulation auftretenden Ionenströme detailliert beschrieben. ML-Neurone exprimierten zumindest zwei verschiedene Typen von spannungsgesteuerten K+-Strömen (IA und IK), einen spannungsabhängigen Na+-Strom und zwei spannungsgesteuerte Ca(Ba)2+-Ströme. Darüber hinaus reagierten sie auf die Neurotransmitter ACh und GABA. Die meisten Ionenströme in den ML-Neuronen waren, trotz ihrer ontogenetischen Besonderheit, annähernd identisch mit denen, die in anderen Drosophila-Neuronen gefunden wurden. Ihnen fehlte allerdings eine anhaltende Komponente des Na+-Stroms, und sie waren homogen in ihrer Aktivität. Selbst bei anhaltender elektrischer Stimulation generierten sie immer nur ein Aktionspotential. Sie sind daher möglicherweise spezifisch hinsichtlich ihrer Signalleitungseigenschaften. Interessanterweise zeigte sich durch Verwendung verschiedener Kulturbedingungen, daß die Expression der spannungsgesteuerten K+-Kanäle weitgehend zellautonom erfolgte, während die Expression der anderen Ströme stark durch das Vohandensein von Neuritenkontakten beeinflußt wurde. Vorläufige Untersuchungen lassen darauf schließen, daß der involvierte molekulare Mechanismus unabhängig von synaptischer Transmission ist. In einer Art 'Ausblick' wurde schließlich die Validität von in vitro Ableitungen durch Analyse spannungsgesteuerter K+-Ströme in einer neuen in situ Präparation geprüft, die verschiedene Bereiche des Drosophila-ZNS für elektrophysiologische Untersuchungen zugänglich macht. Damit ist ein experimentelles System etabliert, daß den direkten Vergleich von in vitro und in situ Daten an definierten Zellpopulationen ermöglichen sollte.

Electrode Materials for Ionic Liquid Based-Supercapacitors

The development of safe, high energy and power electrochemical energy-conversion systems can be a response to the worldwide demand for a clean and low-fuel-consuming transport. This thesis work, starting from a basic studies on the ionic liquid (IL) electrolytes and carbon electrodes and concluding with tests on large-size IL-based supercapacitor prototypes demonstrated that the IL-based asymmetric configuration (AEDLCs) is a powerful strategy to develop safe, high-energy supercapacitors that might compete with lithium-ion batteries in power assist-hybrid electric vehicles (HEVs). The increase of specific energy in EDLCs was achieved following three routes: i) the use of hydrophobic ionic liquids (ILs) as electrolytes; ii) the design and preparation of carbon electrode materials of tailored morphology and surface chemistry to feature high capacitance response in IL and iii) the asymmetric double-layer carbon supercapacitor configuration (AEDLC) which consists of assembling the supercapacitor with different carbon loadings at the two electrodes in order to exploit the wide electrochemical stability window (ESW) of IL and to reach high maximum cell voltage (Vmax). Among the various ILs investigated the N-methoxyethyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR1(2O1)TFSI) was selected because of its hydrophobicity and high thermal stability up to 350 °C together with good conductivity and wide ESW, exploitable in a wide temperature range, below 0°C. For such exceptional properties PYR1(2O1)TFSI was used for the whole study to develop large size IL-based carbon supercapacitor prototype. This work also highlights that the use of ILs determines different chemical-physical properties at the interface electrode/electrolyte with respect to that formed by conventional electrolytes. Indeed, the absence of solvent in ILs makes the properties of the interface not mediated by the solvent and, thus, the dielectric constant and double-layer thickness strictly depend on the chemistry of the IL ions. The study of carbon electrode materials evidences several factors that have to be taken into account for designing performing carbon electrodes in IL. The heat-treatment in inert atmosphere of the activated carbon AC which gave ACT carbon featuring ca. 100 F/g in IL demonstrated the importance of surface chemistry in the capacitive response of the carbons in hydrophobic ILs. The tailored mesoporosity of the xerogel carbons is a key parameter to achieve high capacitance response. The CO2-treated xerogel carbon X3a featured a high specific capacitance of 120 F/g in PYR14TFSI, however, exhibiting high pore volume, an excess of IL is required to fill the pores with respect to that necessary for the charge-discharge process. Further advances were achieved with electrodes based on the disordered template carbon DTC7 with pore size distribution centred at 2.7 nm which featured a notably high specific capacitance of 140 F/g in PYR14TFSI and a moderate pore volume, V>1.5 nm of 0.70 cm3/g. This thesis work demonstrated that by means of the asymmetric configuration (AEDLC) it was possible to reach high cell voltage up to 3.9 V. Indeed, IL-based AEDLCs with the X3a or ACT carbon electrodes exhibited specific energy and power of ca. 30 Wh/kg and 10 kW/kg, respectively. The DTC7 carbon electrodes, featuring a capacitance response higher of 20%-40% than those of X3a and ACT, respectively, enabled the development of a PYR14TFSI-based AEDLC with specific energy and power of 47 Wh/kg and 13 kW/kg at 60°C with Vmax of 3.9 V. Given the availability of the ACT carbon (obtained from a commercial material), the PYR1(2O1)TFSI-based AEDLCs assembled with ACT carbon electrodes were selected within the EU ILHYPOS project for the development of large-size prototypes. This study demonstrated that PYR1(2O1)TFSI-based AEDLC can operate between -30°C and +60°C and its cycling stability was proved at 60°C up to 27,000 cycles with high Vmax up to 3.8 V. Such AEDLC was further investigated following USABC and DOE FreedomCAR reference protocols for HEV to evaluate its dynamic pulse-power and energy features. It was demonstrated that with Vmax of 3.7 V at T> 30 °C the challenging energy and power targets stated by DOE for power-assist HEVs, and at T> 0 °C the standards for the 12V-TSS and 42V-FSS and TPA 2s-pulse applications are satisfied, if the ratio wmodule/wSC = 2 is accomplished, which, however, is a very demanding condition. Finally, suggestions for further advances in IL-based AEDLC performance were found. Particularly, given that the main contribution to the ESR is the electrode charging resistance, which in turn is affected by the ionic resistance in the pores that is also modulated by pore length, the pore geometry is a key parameter in carbon design not only because it defines the carbon surface but also because it can differentially “amplify” the effect of IL conductivity on the electrode charging-discharging process and, thus, supercapacitor time constant.

Funktionelle und strukturelle Charakterisierung des Ovastacins in vivo und in vitro

Die Metalloprotease Ovastacin, ein Vertreter der Astacin-Familie, wurde erstmals 2004 beschrieben. Im Ovar von Säugetieren ist Ovastacin-mRNA im Zeitfenster vom Stadium der Sekundärfollikel bis kurz nach der Befruchtung der Eizelle zu finden. Der Expressionsort und -zeitpunkt sowie die Sequenzähnlichkeit von über 60% mit sogenannten „Schlüpfenzymen“ (engl. hatching enzymes), die man in den Eizellen und Zygoten niederer Wirbeltiere und Wirbelloser gefunden hatte, ließen die Vermutung aufkommen, es könnte sich hier um das Säugerhomolog dieser Proteasen handeln. Generell lösen hatching Enzyme die derben embryonalen Hüllstrukturen (bei Säugern die Zona pellucida, ZP) beim Schlüpfvorgang auf. Die essentielle Bedeutung des Ovastacins für die Befruchtung wird durch die um ca. 30% reduzierte Fruchtbarkeit von Ovastacin defizienten Mäusen belegt. Hochinteressant war in diesem Zusammenhang die Entdeckung des Ovastacins in den Cortikalgranula der Oocyten sowie seine Fähigkeit, das Zona pellucida Protein 2 zu schneiden. Die dadurch bewirkte Verhärtung der Zona pellucida verhindert das Eindringen weiterer Spermien, das heißt sie baut eine Barriere gegen Polyspermie auf. Ziel dieser Arbeit war es, Belege für die physiologische Funktion des Ovastacins zu finden. Vor allem galt es, potentielle Aktivatoren zu identifizieren, da das Enzym wie alle Astacine als inaktive Vorstufe gebildet wird, die proteolytisch aktiviert werden muss. Zu diesem Zweck exprimierte ich rekombinantes Pro-Ovastacin in Insektenzellen. Aktivierungsstudien in vitro zeigten, dass ein saures Milieu zu einer Aktivierung führt, ohne die Abspaltung des Propeptids zu bewirken. Sequenzalignments und ein homologes Strukturmodell des Ovastacins wiesen auf Trypsin- oder Elastase-ähnliche Serinproteasen als potentielle Aktivierungsenzyme hin. Tatsächlich konnte mit diesen beiden Proteasetypen zum ersten Mal aktives Ovastacin aus Pro-Ovastacin erzeugt werden. Trypsin kommt als physiologischer Aktivator allerdings nicht in Betracht, da es bisher in keinem der Gewebe nachgewiesen werden konnte, in dem Ovastacin exprimiert wird. Die neutrophile Elastase dagegen konnte in der Leber, im Herz sowie im Blutplasma nachgewiesen werden. Mit Hilfe spezifischer Antikörper konnte das Herz als Expressionsort für Ovastacin bestätigt werden. Somit wäre Elastase ein potentieller physiologischer Aktivator von Ovastacin. Die Identifikation des Ovastacins in Geweben wie Leber, Herz, Nabelschnur und im Blutplasma weist auf eine Rolle der Protease in proteolytischen Netzwerken außerhalb der Spermien-Ei-Interaktion hin. Die Bedeutung der biologischen Kontrolle des Ovastacins bei der Befruchtung der Säugereizelle wird durch die Beobachtung untermauert, dass das Leberprotein Fetuin B als physiologischer Ovastacininhibitor fungiert und dadurch eine vorzeitige Verhärtung der Zona pellucida verhindert, die andernfalls die Penetration von Spermien prinzipiell verhindern würde.

Ringier (Familie)

Famille de pasteurs, politiciens et entrepreneurs de Zofingue, attestée pour la première fois en 1527, lorsque leur aïeul Jean, tonnelier originaire de Nîmes, obtint la bourgeoisie de Zofingue. Michael (1521-1605), avoyer, l'un de ses cinq fils, est l'ancêtre de la branche des imprimeurs et éditeurs. Après lui, de nombreux R. consolidèrent durablement l'influence de la famille. A partir du XVIIIe s., divers membres firent des carrières politiques, tels Samuel (1706-1786), avoyer, et Rudolf Friedrich (1805-1886), président de la ville. Les R. furent aussi très liés à l'Eglise. Le fils de Michael, Moritz (1557-1615), fut pasteur et doyen à Zofingue. Jusqu'au XIXe s., la famille compta une trentaine d'ecclésiastiques, essentiellement des pasteurs officiant sur le territoire bernois, tels Johann Heinrich ( -> 3) et Michael ( -> 8). Les conseillers Beat (1712-1778) et Niklaus (1734-1766) furent les premiers R. actifs dans la production protoindustrielle de drap. D'autres négociants suivirent jusqu'au milieu du XIXe s. L'architecte Niklaus Emanuel (1744-1815) construisit l'hôtel de ville de Zofingue (1792-1795) de style baroque tardif. Johann Rudolf ( -> 4) se distingua sous la République helvétique (1798-1803). Samuel (1767-1826), conseiller municipal de Zofingue, créa les armoiries du canton d'Argovie en 1803. Les R. s'affirmèrent sur le plan cantonal avec Karl Ludwig ( -> 6), chancelier, et Arnold ( -> 1), conseiller d'Etat et plusieurs fois landamman, et sur le plan fédéral avec Johann Rudolf ( -> 5), conseiller national, et Gottlieb ( -> 2), conseiller aux Etats et chancelier de la Confédération. Johann Rudolf (1803-1874) fonda, en 1833, l'imprimerie Ringier à Zofingue, reprise par son fils Franz Emil (1837-1898). A partir de 1898, Paul August ( -> 9), représentant de la troisième génération d'imprimeurs, agrandit l'entreprise dont il fit la principale imprimerie et maison d'édition de Suisse. Cette expansion se poursuivit après 1960 sous son fils Hans (1906-2003). Avec les fils de celui-ci, Christoph (naissance1941, dans la firme jusqu'en 1991) et Michael (naissance1949), Ringier devint, à partir de 1985, une entreprise multinationale et multimédia. Bibliographie – F. Schoder, Ortsbürger von Zofingen, 1962 – P. Meier, T. Häussler, Zwischen Masse, Markt und Macht, 2009