965 resultados para Used, Oil, Sludge, Engine, Volatile


Relevância:

30.00% 30.00%

Publicador:

Resumo:

Mentha x villosa Huds (Labiatae) is an aromatic herb widely used in folk medicine. Since the essential oil of the herb has many pharmacological activities, including antispasmodic effects, we determined whether the oil and its major constituent, piperitenone oxide (PO), have antinociceptive activity. The essential oil of M. x villosa (EOMV) and PO administered orally at 200 mg/kg (vehicle: 0.1% Tween 80 in water) significantly reduced the writhings induced by acetic acid from control values of 59.5 ± 3.1 s (N = 10) to 31.9 ± 2.8 s (N = 10) and 23.8 ± 3.4 s (N = 10), respectively. When administered at 100 and 200 mg/kg, EOMV reduced the paw licking time for the second phase of the formalin test from the control value of 20.6 ± 2.1 s (N = 13) to 5.3 ± 2.2 s (N = 12) and 2.7 ± 1.2 s (N = 18), respectively. At 100 and 200 mg/kg, PO reduced this second phase to 8.3 ± 2.7 s (N = 12) and 3.0 ± 1.2 s (N = 10), respectively. This effect of EOMV and PO was not reversed by naloxone. EOMV and PO had no significant effect on the first phase of the formalin test. As evaluated by the hot-plate and tail immersion test, EOMV and PO, at doses up to 200 mg/kg, showed no analgesic activity. These results show that EOMV and PO have antinociceptive activity and suggest that this effect is probably an indirect anti-inflammatory effect, which does not involve the central nervous system.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Because the agricultural use of tannery sludge may cause increased risks to soils, composting is recognized as one of the most suitable alternative for tannery sludge recycling. Experiments were conducted under field conditions to evaluate the effects of composted tannery sludge (CTS) on the soil microbial biomass and trace elements after two years of consecutive applications. The following five treatments were used: 0 (without CTS application), 5, 10, 20 and 40 ton ha-1 of CTS (dry basis). Soil samples were collected at 60 days after the CTS application at 0-20 cm depth. The CTS application promoted changes in the soil microbial biomass C (SMB-C) and N (SMB-N). In the first year, significant increases in the SMB-C and SMB-N were observed with the application of 10 ton ha-1. Furthermore, CTS application increased the Cr content in the soil after two years of application.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Azide-alkyne Huisgen click chemistry provides new synthetic routes for making thermoplastic polytriazole polymers-without solvent or catalyst. This method was used to polymerize three diester dialkyne monomers with a lipid derived 18 carbon diazide to produce a series of polymers (labelled C18C18, C18C9, and C18C4 based on monomer chain lengths) free of residual solvent and catalyst. Three diester dialkyne monomers were synthesized with ester chain lengths of 4, 9, and 18 carbons from renewable sources. Significant differences in thermal and mechanical properties were observed between C18C9 and the two other polymers. C18C9 presented a lower melting temperature, higher elongation at break, and reduced Young's modulus compared to C18C4 and C18C18. This was due to the odd-even effect induced by the number of carbon atoms in the monomers which resulted in orientation of the ester linkages of C18C9 in the same direction, thereby reducing hydrogen bonding. The thermoplastic polytriazoles presented are novel polymers derived from vegetable oil with favourable mechanical and thermal properties suitable for a large range of applications where no residual solvent or catalyst can be tolerated. Their added potential biocompatibility and biodegradability make them ideal for applications in the medical and pharmaceutical industries.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

This study focuses on the presence of radon (Rn-222) and volatile organic compounds (VOCs) in soil gases at a gas station located in the city of Rio Claro, Sao Paulo, Brazil, where a fossil fuel leak occurred. The spatial distribution results show a correlation between Rn-222 and VOCs, consistent with the fact that radon gas has a greater chemical affinity with organic phases than with water. This finding demonstrates that the presence of a residual hydrocarbon phase in an aquifer can retain radon, leading to a reduced radon content in the soil gas. The data in this study confirm the results of previous investigations, in which the method used in this study provided a preliminary fingerprint of a contaminated area. Furthermore, the data analysis time is brief, and only simple equipment is required. (C) 2014 Published by Elsevier Ltd.

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEIS

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Neste trabalho são apresentados os resultados de caracterização das principais argilas usadas pela indústria cerâmica vermelha regional e, também, de alguns resíduos sólidos produzidos na região de Presidente Prudente - SP. Os resultados da incorporação destes resíduos em massas cerâmicas são avaliados através do estudo de suas propriedades tecnológicas. Para a caracterização dos materiais foram utilizadas as seguintes técnicas: análise textural (concentração das frações areia, silte e argila), difratometria de raios X e análise térmica. As propriedades tecnológicas de corpos de prova cerâmicos foram avaliadas através dos seguintes parâmetros: retração linear (RL), perda de massa ao fogo (PF), massa específica aparente (MEA), porosidade aparente (PA), absorção de água (AA) e resistência mecânica à flexão (RMF). Corpos de prova, com diferentes concentrações de resíduos, foram prensados (prensa uniaxial manual) e queimados em temperaturas que variaram de 800 a 1200 oC, usando um forno tipo mufla com controle de temperatura. As argilas sedimentares foram coletadas nas margens do rio Paraná e em áreas de várzea, próximas as cerâmicas. As amostras estudadas, coletadas nos depósitos das cerâmicas, são usadas para produção de tijolos maciços, blocos furados e telhas. Quatro tipos diferentes de resíduos foram estudados: (1) lodo de estação de tratamento de água ETA, (2) torta de filtro de indústria de re-refino de óleo lubrificante, (3) pó de vidro (soda-cal) de garrafa tipo long neck descartável, e (4) cinza de bagaço de cana. Estes resíduos foram incorporados em massas cerâmicas coletadas nas indústrias... (Resumo completo, clicar acesso eletrônico abaixo)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Relevância:

30.00% 30.00%

Publicador:

Resumo:

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)