Variabilidade espacial na produção da alface em ambiente protegido

Este artigo mostra a dinâmica da água após ser aplicada sobre a superfície de um solo cultivado com alface, num sistema fechado de um ambiente protegido. A aplicação de água se deu por meio de um sistema de irrigação por gotejamento, com o CUD ( Coeficiente de Uniformidade de Distribuição ) igual a 97,06 %, o que garantiu uma ótima uniformidade de distribuição, desconsiderando como possíveis causas das variações de umidade do solo, a aplicação de lâminas variadas. Fazendo uso de técnicas de geoestatística, interpolando sessenta pontos amostrais de evaporação, umidade do solo e produtividade da alface, com as mesmas sessenta coordenadas para os três atributos, verificou-se que a umidade do solo, mesmo momentos após a irrigação, não permanece uniforme ao longo do sistema de irrigação, constatando-se que a evaporação local exerce influência de forma predominante sobre a dinâmica da água na superfície do solo. Concluiu-se que as regiões no interior da estufa de maiores evaporações, foram as de maiores variações de umidade do solo e na produção de massa verde da alface.

Optimal moment to change pressure regulator and sprayer kit on center pivot irrigation machines: a theoretical proposal

A theoretical model was developed in order to determine the optimal moment for substituting the sprayer and pressure regulator kit on a center pivot irrigation machine. The model is based on the hypothesis that pressure regulator and sprayer deterioration decrease irrigation uniformity. To compensate the deficit that happens at under irrigated areas, an increase on irrigation depth is required. The model considers: additional water consumption and energy costs, maintenance and labor costs, as well as yield losses associated with under or over irrigated areas. The sum of all these components is compared to buying and installing a new spray kit cost, allowing the farmer to decide the best moment to renovate the sprayer and pressure regulator kits on a center pivot irrigation machine based on economic criteria.

Optimal moment to change pressure regulator and sprayer kit on center pivot irrigation machines: application to a study case

A theoretical model developed by the authors for determining the optimal moment to substitute sprayer and pressure regulator kit on a center pivot irrigating potatoes and beans has been applied. The methodology compares the sum of the costs due to additional consumption of water and energy, maintenance and labor, as well as yield losses associated to areas with deficit or over irrigation to the costs due to buy and install a new sprinkling set on the pivot. The results showed that for a reduction of 3.07% of the Hermann and Hein’s Uniformity Coefficient (UCh), the substitution of the sprinkling module on the pivot is justified when potatoes and beans are cultivated.

Comparative embryology and taxonomic considerations in Eriocaulaceae (Poales)

The genus concept within Eriocaulaceae is widely discussed because it is mainly based on a small number of floral characteristics of unknown functional and evolutionary significance. The aim of the present work is to comparatively study the embryology of representatives of most genera of Eriocaulaceae to identify relevant features that might aid in circumscribing them. In Eriocaulaceae, the uniformity of the embryological characteristics makes it difficult to interpret the existing relationships among the genera. Some embryological characteristics, especially those related to the number of microsporangia, are shown to be unstable and restricted to Paepalanthoideae. The unique pollen morphology may be related to mechanical processes to accommodate the increase in volume after early formation of the pollen wall and may indicate a relationship to an inaperturate ancestor. The placentation, formerly stated to be axile, is more likely to be central due to protusions of the locular base. The shape of the proximal region of the megagametophyte may be responsible for the formation of the antipodal cyst. The seed coat structure is uniform in origin and is a consistent taxonomic characteristic of the family. A review of Eriocaulaceae is necessary, in which additional morphological and anatomical characteristics should be considered and combined. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Uso de Dois Espaçamentos Entre Gotejadores na Mesma Linha Lateral e Seus Efeitos Sobre a Formação do Bulbo Molhado no Solo e Parâmetros Físicos de Rabanete

The use of irrigation systems that consume lower water and energy in agriculture is important to supply the growing global demand for food. In this way, it's important to develop techniques that will increase the uniformity of water application on drip irrigation systems. The aim of the work was to compare the provision of lateral lines in drip irrigation, through the formation of wet bulbs in soil and physical parameters of radish, composed of single spacing between drippers in relation to lateral lines composed of two segments, each one composed by different spacing between emitters. Two distributions of evaluation were carried out: 1) conventional drip lateral lines with 20 cm emitter spacing were compared to proposed drip lines, with 24 emitter spacing in the initial section and 20 cm emitter spacing in the final section; 2) conventional drip lateral lines with 30 cm emitter spacing were compared to proposed drip lines, with 36 emitter spacing in the initial section and 30 cm emitter spacing in the final section. The experiment was carried out in a greenhouse of the Sao Manuel Experimental Farm, located at Sao Manuel, SP. The experimental design was entirely randomized, with six treatments and four replications. Results showed no difference among treatments for the most of the evaluated variables. So it is possible to conclude that the use of different spacing between emitters in the same lateral line can be used to increase the line length.

Desiccation tolerance in seeds of Annona emarginata (Schldtl.) H. Rainer and action of plant growth regulators on germination

Annona emarginata (Schldtl.) H. Rainer (araticum-de-terra-fria) is used as a rootstock for several species of Annonaceae. It is suggested that these seeds should be sown immediately after extraction and, therefore, they could be intolerant to desiccation. There are several mechanisms involved with desiccation tolerance. Soluble sugars, for example, can accumulate and act as osmoprotectants for the membrane system during desiccation. The aim of this study is to assess desiccation tolerance in A. emarginata seeds. In addition, we examined the soluble sugars involved in desiccation tolerance. Finally, we determined the effect of gibberellic acid (GA4+7) and N-(phenylmethyl)-aminopurine in promoting the germination of seeds with different water contents. The experiment consisted of a randomized 4×5 factorial design (desiccation levels × concentration of growth regulators). After drying, seeds containing 31 (control), 19, 12 and 5% water were incubated in different concentrations of GA4+7 N-(phenylmethyl)-aminopurine (0, 250, 500, 750 and 1000 mg L-1) for 60 hours. The experiment was conducted in a germination chamber with alternating temperature and photoperiod of 20oC for 18 hours of darkness and 30oC for 6 hours of light. We analyzed electrical conductivity, germination rate, mean germination time, germination speed, frequency and uniformity of germination, percentage of dormant seeds and soluble sugar profile in intact seeds through high-performance liquid chromatography (HPLC). The data were subjected to analysis of variance, and the means were compared using Tukey's test at a threshold of p<0.05. The results showed that seeds of A. emarginata appears to be desiccation tolerant and, also, that sucrose increases when seed water content is reduced to values as low as 12%, exogenous GA4+7+N-(phenylmethyl)-aminopurine improves its germinability.

Water productivity assessment by using MODIS images and agrometeorological data in the Petrolina municipality, Brazil

The municipality of Petrolina, located in the semi-arid region of Brazil, is highlighted as an important agricultural growing region, however the irrigated areas have cleared natural vegetation inducing a loss of biodiversity. To analyze the contrast between these two ecosystems the large scale values of biomass production (BIO), evapotranspiration (ET) and water productivity (WP) were quantified. Monteithś equation was applied for estimating the absorbed photosynthetically active radiation (APAR), while the new SAFER (Simple Algorithm For Evapotranspiration Retrieving) algorithm was used to retrieve ET. The water productivity (WP) was analysed by the ratio of BIO by ET at monthly time scale with four bands of MODIS satellite images together with agrometeorological data for the year of 2011. The period with the highest water productivity values were from March to April in the rainy period for both irrigated and not irrigated conditions. However the largest ET rates were in November for irrigated crops and April for natural vegetation. More uniformity of the vegetation and water variables occurs in natural vegetation, evidenced by the lower values of standard deviation when comparing to irrigated crops, due to the different crop stages, cultural and irrigation managements. The models applied with MODIS satellite images on a large scale are considered to be suitable for water productivity assessments and for quantifying the effects of increasing irrigated areas over natural vegetation on regional water consumption in situations of quick changing land use pattern. © 2012 SPIE.

Model to increase the lateral line length of drip irrigation systems

Non-pressure compensating drip hose is widely used for irrigation of vegetables and orchards. One limitation is that the lateral line length must be short to maintain uniformity due to head loss and slope. Any procedure to increase the length is appropriate because it represents low initial cost of the irrigation system. The hypothesis of this research is that it is possible to increase the lateral line length combining two points: using a larger spacing between emitters at the beginning of the lateral line and a smaller one after a certain distance; and allowing a higher pressure variation along the lateral line under an acceptable value of distribution uniformity. To evaluate this hypothesis, a nonlinear programming model (NLP) was developed. The input data are: diameter, roughness coefficient, pressure variation, emitter operational pressure, relationship between emitter discharge and pressure. The output data are: line length, discharge and length of the each section with different spacing between drippers, total discharge in the lateral line, multiple outlet adjustment coefficient, head losses, localized head loss, pressure variation, number of emitters, spacing between emitters, discharge in each emitter, and discharge per linear meter. The mathematical model developed was compared with the lateral line length obtained with the algebraic solution generated by the Darcy-Weisbach equation. The NLP model showed the best results since it generated the greater gain in the lateral line length, maintaining the uniformity and the flow variation under acceptable standards. It had also the lower flow variation, so its adoption is feasible and recommended.

Model to design drip hose lateral line using two spacing between emitters

The use of non-pressure compensating drip hose in horticultural and annual cycle fruits is growing in Brazil. In this case, the challenge for designers is getting longer lateral lines with high values of uniformity. The objective of this study was to develop a model to design longer lateral lines using non-pressure compensating drip hose. Using the developed model, the hypotheses to be evaluated were: a) the use of two different spacing between emitters in the same lateral line allows longer length; b) it is possible to get longer lateral lines using high values of pressure variation in the lateral lines since the distribution uniformity stays below allowable limits. A computer program was developed in Delphi based on the model developed and it is able to design lateral lines in level using non-pressure compensating drip hose. The input data are: desired distribution uniformity (DU); initial and final pressure in the lateral line; coefficients of relationship between emitter discharge and pressure head; hose internal diameter; pipe cross-sectional area with the dripper; and roughness coefficient for the Hazen-Williams equation. The program allows calculate the lateral line length with three possibilities: selecting two spacing between emitters and defining the exchange point; using two pre-established spacing between emitters and calculating the length of each section with different spacing; using one emitter spacing. Results showed that the use of two sections with different spacing between drippers in the lateral line didn't allow longer length but got better uniformity when compared with lateral line with one spacing between emitters. The adoption of two spacing increased the flow rate per meter in the final section which represented approximately 80% of the lateral line total length and this justifies their use. The software allowed DU above 90% with pressure head variation of 40% and the use of two spacing between emitters. The developed model/software showed to be accurate, easy to handle and useful for lateral line design using non-pressure compensating drip hose.

Anatomia radicial de Mormodes sinuata Rchb. f. & Warm.; (Catasetinae, Cymbidieae: Orchidaceae)

Since there is a lack of information on the root organization of the sub-tribe Catasetinae, current research describes the anatomy of Mormodes sinuata roots and indicate adaptations related to water provision and other taxonomical traits. Five roots of three plants, cut at the median region with a blade, were fixed and preserved in alcohol 5%. Cuts were stained by saffron blue 0.05% and mounted in glycerin. Although the roots have structural characteristics adapted to epiphytism, some anatomic characteristics demonstrate that the species requires more watering or wetter environments when compared with other types of Catasetinae. Root anatomic characteristics foreground results by authors who include the sub-tribe Catasetinae within the tribe Cymbidieae. Further, anatomic characteristics have a generic uniformity and are a tool for the genus's systematics.

Variação entre a lâmina de irrigação aplicada e armazenada no solo sob condições de irrigação com baixa uniformidade de distribuição de água

In sprinkler irrigation is important to have a good uniformity of application so that the water in the root zone does not show areas with little available water while others have percolating beyond the plant roots, even though the soil allows a lateral redistribution of water. A usual way to obtain the uniformity of irrigation is by measures of dispersion. The aim of this work was to evaluate the uniformity of water stored in a sand soil before and after non uniformity depth irrigation applied from one sprinkler, as well the variation of storage in a 0-0,45 m layer soil using a neutron probe. The statistical design was completely randomized, and for the variable Christiansen uniformity coefficient modified (CUCHH) were 10 treatments (the irrigation depth, 8 intervals of readings storage, more the existing one before irrigation added to the irrigation depth). For the variable soil water, the treatments were the same, excepting the irrigation depth. Despite the low surface uniformity (16.3%), there was not significantly difference between the storage uniformity before, after irrigation and the potential, however there was from these to the surface uniformity. From de irrigation depth, 15.3 mm, only 6.1 mm remained in the layer from 0 to 0.45 m. There was not significantly difference between the water stored in the soil before and after irrigation within a period of up to 134 hours, being the increase in storage due to irrigation was just 11.7%.

Aggregate shape and tensile strength measurement

Tensile strength (TS) of soil aggregates is an important indicator of soil quality. However, TS varies with aggregate shape. Thus, the objective of this study was to quantify the influence of aggregate shape on TS and propose a shape standardization protocol to increase accuracy in the measurement of TS. The latter was determined on 7,560 aggregates divided into three shapes, (i) irregular shape (IS), (ii) spherical shape (SS), and (iii) flat surface (FS), while preserving the inherent structure of the aggregate. The aggregates with IS had a larger range in the TS (306 kPa) because of the shape variability when compared with SS (238 kPa) and FS (129 kPa). The TS determined in aggregates with FS had smaller coefficient of variation (46%) in comparison with those of IS (70%) and SS (66%), indicating that the aggregate uniformity reduced the influence of shape on the TS. A smaller force (42.12 kPa) was needed to rupture aggregates with FS than IS (58.43 kPa) and SS (56.89 kPa) because of better force distribution in causing the tensile stress. The use of aggregates with the FS enables an accurate assessment of TS in relation to a wide range of management treatments. Copyright © 2013 by Lippincott Williams & Wilkins.

Stocking density of Nile tilapia in cages placed in a hydroelectric reservoir

The Brazilian government has been encouraging fish farming in cages in federal water bodies, including hydroelectric reservoirs. Despite the government support, it is a new activity and the production model still needs some adjustment to reduce the production costs and achieve sustainability. The aims of this study were to determine the appropriate stocking density of Nile tilapia in cages in a hydroelectric reservoir and to evaluate to what extent fish size selection could improve their uniformity. Twelve cages (6m3) were placed at the Fish Farmers' Cooperative of Santa Fé do Sul and Region, Ilha Solteira reservoir, São Paulo, Brazil (20°12'10″S, 50°58'31.15″W). In stage I (initial fish weight, 78g), four stocking densities were tested: D1-800, D2-2000, D3-2500 and D4-3000 fish/cage, with three replicates. At the end of this stage (average fish weight, 255g), the fish were selected into three sizes, except for D1. In stage II, four stocking densities were tested, designed to obtain the following final production: D1-100kg/m3 (800 non-selected fish/cage), D2-80kg/m3 (600 fish/cage), D3-100kg/m3 (800 fish/cage) and D4-120kg/m3 (900 fish/cage). The trial ended when the fish weighed 800g. By reducing the initial stocking density from 2500 to 800 tilapia juveniles per cage, there was no need for selection. The growth performance was higher, the feed conversion rate was better and the time taken to reach harvesting was shorter. Consequently, the production cost reduced and the operating profit increased. Using the lowest initial stocking density, the risk of disease outbreak was also lower, and there was no need to use drugs for disease control since the mortality rate and occurrences of disease and deformity decreased and the dissolved oxygen level inside the cages was higher. © 2013 Elsevier B.V.

Avaliação qualitativa e quantitativa na deposição de calda de pulverização em quatro espécies do gênero commelina

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uso de fitorreguladores e efeitos no florescimento de plantas de pinhão-manso e na maturidade fisiológica das sementes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)