997 resultados para Tropical cut flower
Resumo:
Calcium chloride is widely used in industries as a firming agent, and also to extend shelf-life of vegetables. The aim of this study was to determine, the effect of different doses of calcium chloride on biochemical and color properties of fresh-cut green bean. Fresh-cut green beans were dipped for 90 seconds in 0.5%, 1%, 2% and 3% solution of calcium chloride at 25°C. The fresh-cut green bean samples were packaged in polystyrene foam dishes, wrapped with stretch film and stored in a cold room at 5±1°C temperature and 85-90% RH. Calcium chloride treatments did not retain the green color of samples. Whiteness index, browning index and total color difference (ΔE) values of CaCl2 treated samples were high. Saturation index and hue angle were low compared to the control, especially at higher doses of CaCl2. Polyphenol oxidase (PPO) enzyme activity in samples treated with CaCl2 at 3% doses, was low at the 7th days of storage than with other treatments. Fructose and sucrose content of samples increased in all treatment groups whereas glucose level decreased during the first 4th days of storage.
Resumo:
Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.
Resumo:
Programas, proyectos y red de portales
Resumo:
Desarrollo empresarial y creación de empresa
Resumo:
Catharanthlls rosellS (L.) G Don is a commercially significant flower species and in addition is the only source of the monoterpenoid indole alkaloids (MIA) vinblastine and vincristine, which are key pharmaceutical compounds that are used to combat a number of different cancers. Therefore, procurement of the antineoplastic agents is difficult but essential procedure. Alternatively, CatharanthllS tissue cultures have been investigated as a source of these agents; however they do not produce vindoline, which is an obligate precursor to vinblastine and vincristine. The interest in developing high MIA cultivars of Catharantlws rosellS has prompted metabolic profiling studies to determine the variability of MIA accumulation of existing flowering cultivars, with particular focus on the vindoline component ofthe pathway. Metabolic profiling studies that used high performance liquid chromatography of MIAs from seedlings and young leaf extracts from 50 different flowering cultivars showed that, except for a single low vindoline cultivar (Vinca Mediterranean DP Orchid), they all accumulate similar levels of MIAs. Further enzymatic studies with extracts from young leaves and from developing seedlings showed that the low vindoline cultivar has a IO-fold lower tabersonine-16-hydroxylase activity than those of CatharanthllS rosellS cv Little Delicata. Additionally, studies aimed at metabolic engineering ofvindoline bios}l1thesis in Catharanthus rosellS hairy root cultures have been performed by expressing the last step in vindoline biosynthesis [Dcacetylvindoline-4-0- acetyltransferase (DAT)]. Enzymatic profiling studies with transformed hairy roots have confirmed that over-expressing DAT leads to lines with high levels of O-acetyltransferase activity when compared to non-expressing hairy roots. One particular DA T over111 expressing hairy root culture (line 7) contained 200 times the OAT activity than leaves of control lines. Additional MIA analyses revealed that DAT over-expressing hairy roots have an altered alkaloid profile with significant variation in the accumulation of h6rhammericine. Further analysis of transformed hairy root line 7 suggests a correlation between the expression of OAT activity and h6rhammericine accumulation with root maturation. These studies show that metabolic and selective enzymatic profiling can enhance our ability to search for relevant MIA pathway mutants and that genetic engineering with appropriate pathway genes shows promise as a tool to modify the MIA profile of Catharanthus roseus.
Resumo:
Survey map of the Second Welland Canal created by the Welland Canal Company showing the canal in Thorold South. Identified structures associated with the Canal include the Little Deep Cut and the towing path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks are also identified and include streets and roads (ex. Road to Beaverdams and Road to Allanburgh), two unnamed bridges, the Spoil Bank, a pond, and the Back Water. Properties and property owners of note are: Lots 29 and 30, Jacob Keefer, John Brown, William Bouck, C. Gisso, and a property reserved for Bridge Tender.
Resumo:
Survey map of the Second Welland Canal created by the Welland Canal Company showing the canal in the Thorold Township just south of Allanburgh. Identified structures and features associated with the Canal include the Deep Cut and the towing path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks are also identified and include streets and roads (ex. Road to Port Robinson), and the Spoil Bank. Properties and property owners of note are: Lots 142 and 143, John J. Church, Henry Vanderburgh, and Martin Delamatter and G. Coulter.
Resumo:
Survey map of the Second Welland Canal created by the Welland Canal Company showing the canal in the Thorold Township between Allanburg and Port Robinson. Identified structures and features associated with the Canal include the Deep Cut and the towing path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks are also identified and include streets and roads (ex. Road to Port Allanburg), and the Spoil Bank. Properties and property owners of note are: Lots 185, 186, and 187, J. J. Church and H. Vanderburgh. Four properties adjacent to the canal are outlined in blue and labeled J through M, with L and K belonging to John Beatty, M belonging to John Coulter, and J belonging to G. Jordan (formerly belonging to John Coleman Jordan).
Resumo:
Survey map of the Second Welland Canal created by the Welland Canal Company showing the canal at Port Robinson. Identified structures and features associated with the Canal include the Deep Cut, Old Channel of Canal, and the towing path. The surveyors' measurements and notes can be seen in red and black ink and pencil. Local area landmarks are also identified and include streets and roads (ex. Road to Port Allanburg), the Spoil Bank, an island, several bridges, and a church. Several unidentified structures are present but not labeled. Properties and property owners of note are: Lots 202, 203, and 204. Lot 203 is divided into several properties labeled A - J. Owners of these properties include James McCoppen, John Coulter, James Griffith, John C. Jordan, W. Hendershot, John Greer, Charles Richards, C. Stuart, and S. D. Woodruff. Other property owners include D. McFarland.
Resumo:
Survey map and description of the land at the cut of the Chippewa or Welland River. Created by The Welland Canal Company. Included is a drawing of the land along with brief surveyors notes. Noteable features include; bridge, Welland River, road, Stone house, J. Cummings Esq. house, military line, military land, Old Fort, old military draw bridge. Surveyor notes are seen in pencil on the map.
Resumo:
Glutaredoxins are oxidoreductases capable of reducing protein disulfide bridges and glutathione mixed disulfides through the process of deglutathionylation and glutathionylation. Lately, redox-mediated modifications of functional cysteine residues of TGA1 and TGA8 transcription factors have been postulated. Namely, GRX480 and ROXY1 glutaredoxins have been previously shown to interact with TGA proteins and have been suggested to regulate redox state of these proteins. TGA1, together with TGA2, is involved in systemic acquired resistance (SAR) establishment in the plant Arabidopsis thaliana through PR1 (Pathogenesis related 1) gene activation. They both form an enhanceosome complex with the NPR1 protein (non-expressor of pathogenesis related gene 1) which leads to PR1 transcription. Although TGA1 is capable of activating PR1 transcription, the ability of the TGA1 NPR1 enhanceosome complex to assembly is based on the redox status of TGA1. We identified GRX480 as a glutathionylating enzyme that catalyzes the TGA1 glutathione disulfide transferase reaction with a Km of around 20μM GSSG (oxidized glutathione). Out of four cysteine residues found within TGA1, C172 and C266 were found to be glutathionylated by this enzyme. We also confirmed TGA1 glutathionylation in vivo and showed that this modification takes place while TGA1 is associated with the PR1 promoter enzymatically via GRX480. Furthermore, we show that glutathionylation via GRX480 abolishes TGA1's interaction with NPR1 and consequently prevents the TGA1-NPR1 transcription activation of PR1. When glutathionylated, TGA1 is recruited to the PR1 promoter and acts as a repressor. Therefore, glutathionylation is a mechanism that prevents TGA1 NPR1 interaction, allowing TGA1 to function as a repressor of PR1 transcription. Surprisingly, GRX480 was not able to deglutathionylate proteins demonstrating the irreversible nature of the reaction. Moreover, we demonstrate that other members of CC-class glutaredoxins, namely ROXY1 and ROXY2, can also catalyze protein glutathionylation. The TGA8 protein was previously shown to interact with NPR1 analogs, BOP1 and BOP2 proteins. However, unlike the case of TGA1 NPR1 interaction, here we demonstrate that TGA8-BOP1 interaction is not redox regulated and that TGA8 glutathionylation by ROXY1 and ROXY2 enzymes does not abolish this interaction in vitro. However, TGA8 glutathionylation results in TGA8 oligomer disassembly into smaller complexes and monomers. Our results suggest that CC-Grxs are unable to reduce mixed disulfides, instead they efficiently catalyze the opposite reaction which distinguishes them from traditional glutaredoxins. Therefore, they should not be classified as glutaredoxins but as protein glutathione disulfide transferases.
Resumo:
A place card with an illustration of a girl in a blue dress and red flowers.
Resumo:
A place card with an illustration of a girl in a green dress and red flowers.
Resumo:
Pay roll voucher #27 from the Engineer Department of the Welland Railway for sundries for the month of August, 1857. A section of the list has been cut from the page, Aug. 31, 1857.