Climate change, sustainability and science education

The world and its peoples are facing multiple, complex challenges and we cannot continue as we are (Moss, 2010). Earth���s ���natural capital��� - nature���s ability to provide essential ecosystem services to stabilize world climate systems, maintain water quality, support secure food production, supply energy needs, moderate environmental impacts, and ensure social harmony and equity ��� is seriously compromised (Gough, 2005; Hawkins, Lovins & Lovins, 1999). To further summarize, current rates of resource consumption by the global human population are unsustainable (Kitzes, Peller, Goldfinger & Wackernagel, 2007) for human and non-human species, and for future generations. Further, continuing growth in world population and global political commitment to growth economics compounds these demands. Despite growing recognition of the serious consequences for people and planet, little consideration is given, within most nations, to the social and environmental issues that economic growth brings. For example, Australia is recognised as one of the developed countries most vulnerable to the impacts of climate change. Yet, to date, responses (such as carbon pricing) have been small-scale, fragmented, and their worth disputed, even ridiculed. This is at a time referred to as ���the critical decade��� (Hughes & McMichael, 2011) when the world���s peoples must make strong choices if we are to avert the worst impacts of climate change.

Art and science as creative catalysts

Science, Art and Science Art collaborations are generally presented and understood in terms of their products. We argue that the process of Science art can be a significant, even principal benefit of these collaborations, even though it may be largely invisible to anyone other than the collaborators. Hosting the Centenary of Canberra Science Art Commission at the Commonwealth Scientific and Industrial Research Organisation (CSIRO) has shown us that while Science and Art pursue orthogonal dimensions of creativity and innovation, collaborators can combine these directions to access new areas of imagination and ideas.

Toward the multilevel older person's transportation and road safety model: A new perspective on the role of demographic, functional, and psychosocial factors

Objectives Self-regulation refers to the practice of using self-imposed restrictions to protect oneself from situations that are, or are perceived to be, unsafe. Within the driving context, self-regulation refers the compensatory practices that some older adults adopt to restrict their driving to situations in which they feel safe. However, the way in which demographic, functional, and psychosocial factors, and the interactions between these factors, influence older adults��� driving self-regulation is not well understood. Improving this understanding could lead to new ways of considering the mobility concerns faced by older drivers. Method A systematic review of the current literature was conducted to explore this issue. Twenty-nine empirical studies investigating the factors associated with older adults��� self-regulatory driving behaviors were examined. Results The review findings were used to construct the Multilevel Older Persons Transportation and Road Safety (MOTRS) model. The MOTRS model proposes that individual and environmental factors such as age, gender, and the availability of alternative transportation predict older adults��� practice of driving-related self-regulation. However, these variables influence self-regulation through psychosocial variables such as driving confidence, affective attitude, and instrumental attitude toward driving. Discussions The MOTRS model extends previous attempts to model older adults��� driving by focusing on a novel target, driving self-regulation, and by including a wider range of predictors identified on the basis of the systematic literature review. This focus enables consideration of broader mobility issues and may inform new strategies to support the mobility of older adults.

Performance-Based Quality Assurance/Quality Control (QA/QC) Acceptance Procedures for In-Place Soil Testing Phase 3

One of the objectives of this study was to evaluate soil testing equipment based on its capability of measuring in-place stiffness or modulus values. As design criteria transition from empirical to mechanistic-empirical, soil test methods and equipment that measure properties such as stiffness and modulus and how they relate to Florida materials are needed. Requirements for the selected equipment are that they be portable, cost effective, reliable, a ccurate, and repeatable. A second objective is that the selected equipment measures soil properties without the use of nuclear materials.The current device used to measure soil compaction is the nuclear density gauge (NDG). Equipment evaluated in this research included lightweight deflectometers (LWD) from different manufacturers, a dynamic cone penetrometer (DCP), a GeoGauge, a Clegg impact soil tester (CIST), a Briaud compaction device (BCD), and a seismic pavement analyzer (SPA). Evaluations were conducted over ranges of measured densities and moistures.Testing (Phases I and II) was conducted in a test box and test pits. Phase III testing was conducted on materials found on five construction projects located in the Jacksonville, Florida, area. Phase I analyses determined that the GeoGauge had the lowest overall coefficient of variance (COV). In ascending order of COV were the accelerometer-type LWD, the geophone-type LWD, the DCP, the BCD, and the SPA which had the highest overall COV. As a result, the BCD and the SPA were excluded from Phase II testing.In Phase II, measurements obtained from the selected equipment were compared to the modulus values obtained by the static plate load test (PLT), the resilient modulus (MR) from laboratory testing, and the NDG measurements. To minimize soil and moisture content variability, the single spot testing sequence was developed. At each location, test results obtained from the portable equipment under evaluation were compared to the values from adjacent NDG, PLT, and laboratory MR measurements. Correlations were developed through statistical analysis. Target values were developed for various soils for verification on similar soils that were field tested in Phase III. The single spot testing sequence also was employed in Phase III, field testing performed on A-3 and A-2-4 embankments, limerock-stabilized subgrade, limerock base, and graded aggregate base found on Florida Department of Transportation construction projects. The Phase II and Phase III results provided potential trend information for future research���specifically, data collection for in-depth statistical analysis for correlations with the laboratory MR for specific soil types under specific moisture conditions. With the collection of enough data, stronger relationships could be expected between measurements from the portable equipment and the MR values. Based on the statistical analyses and the experience gained from extensive use of the equipment, the combination of the DCP and the LWD was selected for in-place soil testing for compaction control acceptance. Test methods and developmental specifications were written for the DCP and the LWD. The developmental specifications include target values for the compaction control of embankment, subgrade, and base materials.

Evolution of self-reporting methods for identifying discrete emotions in science classrooms

Emotion researchers have grappled with challenging methodological issues in capturing emotions of participants in naturalistic settings such as school or university classrooms. Self-reporting methods have been used frequently, yet these methods are inadequate when used alone. We argue that the self-reporting methods of emotion diaries and cogenerative dialogues can be helpful in identifying in-the-moment emotions when used in conjunction with the microanalysis of video recordings of classroom events. We trace the evolution of our use of innovative self-reporting methods through three cases from our research projects, and propose new directions for our ongoing development and application of these methods in both school and university classrooms.

Ultrafine particle emission of waste incinerators and comparison to the exposure of urban citizens

On the basis of the growing interest on the impact of airborne particles on human exposure as well as the strong debate in Western countries on the emissions of waste incinerators, this work reviewed existing literature to: (i) show the emission factors of ultrafine particles (particles with a diameter less than 100 nm) of waste incinerators, and; (ii) assess the contribution of waste incinerators in terms of ultrafine particles to exposure and dose of people living in the surrounding areas of the plants in order to estimate eventual risks. The review identified only a limited number of studies measuring ultrafine particle emissions, and in general they report low particle number concentrations at the stack (the median value was equal to 5.5��103 part cm-3), in most cases higher than the outdoor background value. The lowest emissions were achieved by utilization of the bag-house filter which has an overall number-based filtration efficiency higher than 99%. Referring to reference case, the corresponding emission factor is equal to 9.1��1012 part min-1, that is lower than one single high-duty vehicle. Since the higher particle number concentrations found in the most contributing microenvironments to the exposure (indoor home, transportation, urban outdoor), the contribution of the waste incinerators to the daily dose can be considered as negligible.

A simulator evaluation of effects of assistive technologies on driver cognitive load at railway level crossings

Intelligent Transport Systems (ITS) have the potential to substantially reduce the number of crashes caused by human errors at railway levels crossings. However, such systems could overwhelm drivers, generate different types of driver errors and have negative effects on safety at level crossing. The literature shows an increasing interest for new ITS for increasing driver situational awareness at level crossings, as well as evaluations of such new systems on compliance. To our knowledge, the potential negative effects of such technologies have not been comprehensively evaluated yet. This study aimed at assessing the effect of different ITS interventions, designed to enhance driver behaviour at railway crossings, on driver���s cognitive loads. Fifty eight participants took part in a driving simulator study in which three ITS devices were tested: an in-vehicle visual ITS, an in-vehicle audio ITS, and an on-road valet system. Driver cognitive load was objectively and subjectively assessed for each ITS intervention. Objective data were collected from a heart rate monitor and an eye tracker, while subjective data was collected with the NASA-TLX questionnaire. Overall, results indicated that the three trialled technologies did not result in significant changes in cognitive load while approaching crossings.

Where is spatial information and science in your world?

Skills in spatial sciences are fundamental to understanding our world in context. Increasing digital presence and the availability of data with accurate spatial components has allowed almost everything researchers and students do to be represented in a spatial context. Representing outcomes and disseminating information has moved from 2D to 4D with time series animation. In the next 5 years industry will not only demand QUT graduates have spatial skills along with analytical skills, graduates will be required to present their findings in spatial visualizations that show spatial, spectral and temporal contexts. Domains such as engineering and science will no longer be the leaders in spatial skills as social sciences, health, arts and the business community gain momentum from place-based research including human interactions. A university that can offer students a pathway to advanced spatial investigation will be ahead of the game.

Translating Management Storylines: developing a visual strategy to communicate science to stakeholder community, a case for Mackay, QLD

This project developed a visual strategy and graphic outcomes to communicate the results of a scientific collaborative project to the Mackay community. During 2013 and 2014 a team from CSIRO engaged with the community in Mackay to collaboratively develop a set of strategies to improve the management of the Great Barrier Reef. The result of this work was a 300+ page scientific report that needed to be translated and summarised to the general community. The aim of this project was to strategically synthesise information contained in the report and to design and produce an outcome to be distributed to the participant community. By working with the CISRO researchers, an action toolkit was developed, with twelve cards and a booklet. Each card represented the story behind a certain local management issue and the actions that the participants suggested should be taken in order to improve management of The Reef. During the design synthesis it was identified that for all management issues there was a reference to the need to develop some sort of "educational campaign" to the area. That was then translated as an underlying action to support all other actions proposed in the toolkit.

Predicting people���s intention to donate their body to medical science and research

Predictors of people���s intention to register with a body bequest program for donating their deceased body to medical science and research were examined using standard theory of planned behavior (TPB) predictors (attitude, subjective norm, perceived behavioral control) and adding moral norm, altruism, and knowledge. Australian students (N = 221) at a university with a recently established body bequest program completed measures of the TPB���s underlying beliefs (behavioral, normative, and control beliefs) and standard and extended TPB predictors, with a sub-sample reporting their registration-related behavior 2 months later. The standard TPB accounted for 43.6%, and the extended predictors an additional 15.1% of variance in intention. The significant predictors were attitude, subjective norm, and moral norm, partially supporting an extended TPB in understanding people���s body donation intentions. Further, important underlying beliefs can inform strategies to target prospective donors.

Cognitive neuroimaging: Cognitive science out of the armchair

Cognitive scientists were not quick to embrace the functional neuroimaging technologies that emerged during the late 20th century. In this new century, cognitive scientists continue to question, not unreasonably, the relevance of functional neuroimaging investigations that fail to address questions of interest to cognitive science. However, some ultra-cognitive scientists assert that these experiments can never be of relevance to the study of cognition. Their reasoning reflects an adherence to a functionalist philosophy that arbitrarily and purposefully distinguishes mental information-processing systems from brain or brain-like operations. This article addresses whether data from properly conducted functional neuroimaging studies can inform and subsequently constrain the assumptions of theoretical cognitive models. The article commences with a focus upon the functionalist philosophy espoused by the ultra-cognitive scientists, contrasting it with the materialist philosophy that motivates both cognitive neuroimaging investigations and connectionist modelling of cognitive systems. Connectionism and cognitive neuroimaging share many features, including an emphasis on unified cognitive and neural models of systems that combine localist and distributed representations. The utility of designing cognitive neuroimaging studies to test (primarily) connectionist models of cognitive phenomena is illustrated using data from functional magnetic resonance imaging (fMRI) investigations of language production and episodic memory.

Emotionally intense science activities

Science activities that evoke positive emotional responses make a difference to students��� emotional experience of science. In this study, we explored 8th Grade students��� discrete emotions expressed during science activities in a unit on Energy. Multiple data sources including classroom videos, interviews and emotion diaries completed at the end of each lesson were analysed to identify individual student's emotions. Results from two representative students are presented as case studies. Using a theoretical perspective drawn from theories of emotions founded in sociology, two assertions emerged. First, during the demonstration activity, students experienced the emotions of wonder and surprise; second, during a laboratory activity, students experienced the intense positive emotions of happiness/joy. Characteristics of these activities that contributed to students��� positive experiences are highlighted. The study found that choosing activities that evoked strong positive emotional experiences, focused students��� attention on the phenomenon they were learning, and the activities were recalled positively. Furthermore, such positive experiences may contribute to students��� interest and engagement in science and longer term memorability. Finally, implications for science teachers and pre-service teacher education are suggested.