Working in the Australian suburbs: Creative industries workers’ adaptation of traditional work spaces

The cultural and creative industries contribution to the economic and social sustainability of cities is a well acknowledged phenomenon which has accelerated in the era of urban renewal since the late twentieth century. The second-tier city of Brisbane, Australia was for many years considered a cultural backwater in the national context, yet its recent urban development within a short period of time has produced a city that now has all the hallmarks of a ‘creative city’. Brisbane’s transformation has been shaped by urban and cultural policies that are largely focussed around its inner-metropolitan localities, producing a growth in cultural infrastructure and the aestheticisation of inner-city precincts. However, like most Australian cities, the majority of Brisbane’s population live, and increasingly work in the suburbs. This article is based on a large research project that shows that creative industries workers are well represented across suburban localities. The article examines the policy and planning implications for creative industries located in Australian outer suburbs and the communities in which they are located.

Evaluation of the iPhone with an acrylic sleeve versus the Scoliometer for rib hump measurement in scoliosis

Background. Vertebral rotation found in structural scoliosis contributes to trunkal asymmetry which is commonly measured with a simple Scoliometer device on a patient's thorax in the forward flexed position. The new generation of mobile 'smartphones' have an integrated accelerometer, making accurate angle measurement possible, which provides a potentially useful clinical tool for assessing rib hump deformity. This study aimed to compare rib hump angle measurements performed using a Smartphone and traditional Scoliometer on a set of plaster torsos representing the range of torsional deformities seen in clinical practice. Methods. Nine observers measured the rib hump found on eight plaster torsos moulded from scoliosis patients with both a Scoliometer and an Apple iPhone on separate occasions. Each observer repeated the measurements at least a week after the original measurements, and were blinded to previous results. Intra-observer reliability and inter-observer reliability were analysed using the method of Bland and Altman and 95% confidence intervals were calculated. The Intra-Class Correlation Coefficients (ICC) were calculated for repeated measurements of each of the eight plaster torso moulds by the nine observers. Results. Mean absolute difference between pairs of iPhone/Scoliometer measurements was 2.1 degrees, with a small (1 degrees) bias toward higher rib hump angles with the iPhone. 95% confidence intervals for intra-observer variability were +/- 1.8 degrees (Scoliometer) and +/- 3.2 degrees (iPhone). 95% confidence intervals for inter-observer variability were +/- 4.9 degrees (iPhone) and +/- 3.8 degrees (Scoliometer). The measurement errors and confidence intervals found were similar to or better than the range of previously published thoracic rib hump measurement studies. Conclusions. The iPhone is a clinically equivalent rib hump measurement tool to the Scoliometer in spinal deformity patients. The novel use of plaster torsos as rib hump models avoids the variables of patient fatigue and discomfort, inconsistent positioning and deformity progression using human subjects in a single or multiple measurement sessions.

Pragmatics, perceptions and strategies in Chinese college English learning

This study investigated Chinese College English students. perceptions of pragmatics, their pragmatic competence in selected speech acts, strategies they employed in acquiring pragmatic knowledge, as well as their general approach to learning English as a foreign language. The research was triggered by a national curriculum initiative that prioritizes the need for College English students to enhance their ability to use English effectively in different social interactions (Chinese College English Education and Supervisory Committee, 2007). The traditional "grammar-translation" and "examination-oriented" method is believed to have reduced Chinese College English students to what is dubbed "mute" and "deaf" language learners (Zhang, 2008; Zhao, 2009). Many students lack pragmatic knowledge on how to interpret discourse by relating utterances to their meanings, understanding the intention of language users, and how language is used in specific settings (Bachman & Palmer, 1996, 2010). There is an increasing body of literature on awareness-raising of the importance of pragmatic knowledge and strategies for classroom instruction. However, to date, researchers have tended to focus largely on the teaching of pragmatics, rather than on how students acquire pragmatic competence (Bardovi-Harlig & Dornyei, 1998; Du, 2004; Hou, 2007; Ruan, 2007; Schauer, 2009). It is this gap in the research that this study fills, with a focus on different types of pragmatic knowledge, learner perceptions of such knowledge, and learning strategies that College English students employ in the process of learning English in general, and pragmatics in particular. Three strands of theories of second language acquisition (Ellis, 1985, 1994): pragmatics (Levinson, 1983; Mey, 2001; Yule, 1996), intercultural communications (Kramsch, 1998; Samovar & Porter, 1997; Samovar, Porter & McDaniel, 2009) and English as a lingua franca (ELF) (Canagarajah, 2006; Firth, 1996; Pennycook, 2010) were employed to establish a conceptual framework for data collection and analyses. Key constructs derived from the three related theories helped to form a typology for a detailed examination and theorization of the empirical evidence gathered from different sources. Four research instruments: a questionnaire (N=237), Discourse Completion Tasks (DCTs) (N=55), focus group interviews (N=18), and a textbook tasks analysis were employed to collect data for this systematic inquiry. Data collected by different instruments were analyzed and compared by way of a triangulation to enhance its validity and reliability. Major findings derived from different sources highlighted that, although College English students were grammatically advanced language learners, they displayed limited pragmatic knowledge and a highly restricted repertoire of language learning strategies. The majority of the respondents, however, believed that pragmatic knowledge was as important as linguistic knowledge in the process of developing communicative competence for interaction in different contexts. It was argued that a combination of a less than sufficient English proficiency, limited knowledge of pragmatics, inadequate language materials and tasks, and a small stock of language learning strategies, were a major hindrance to effective learning and communication, resulting in pragmatic failures in many intercultural communication situations. As the first systematic study of how Chinese College English students learned pragmatics, the research provided a solid empirical base for developing a tentative model for the learning of pragmatics in a College English classroom in China and similar educational contexts. The model was strengthened by a unique combination of theories of pragmatics, intercultural communication and ELF. Findings from this research provided insights into how Chinese College English students perceived pragmatics in the English as foreign language (EFL) curriculum, the processes of learning, as well as strategies they utilized in developing linguistic and pragmatic knowledge and competence.

An improved method to detect damage using modal strain energy based damage index

This paper presents two novel concepts to enhance the accuracy of damage detection using the Modal Strain Energy based Damage Index (MSEDI) with the presence of noise in the mode shape data. Firstly, the paper presents a sequential curve fitting technique that reduces the effect of noise on the calculation process of the MSEDI, more effectively than the two commonly used curve fitting techniques; namely, polynomial and Fourier’s series. Secondly, a probability based Generalized Damage Localization Index (GDLI) is proposed as a viable improvement to the damage detection process. The study uses a validated ABAQUS finite-element model of a reinforced concrete beam to obtain mode shape data in the undamaged and damaged states. Noise is simulated by adding three levels of random noise (1%, 3%, and 5%) to the mode shape data. Results show that damage detection is enhanced with increased number of modes and samples used with the GDLI.

A new analytic approach for power system fault diagnosis employing the temporal information of alarm messages

Traditional analytic models for power system fault diagnosis are usually formulated as an unconstrained 0–1 integer programming problem. The key issue of the models is to seek the fault hypothesis that minimizes the discrepancy between the actual and the expected states of the concerned protective relays and circuit breakers. The temporal information of alarm messages has not been well utilized in these methods, and as a result, the diagnosis results may be not unique and hence indefinite, especially when complicated and multiple faults occur. In order to solve this problem, this paper presents a novel analytic model employing the temporal information of alarm messages along with the concept of related path. The temporal relationship among the actions of protective relays and circuit breakers, and the different protection configurations in a modern power system can be reasonably represented by the developed model, and therefore, the diagnosed results will be more definite under different circumstances of faults. Finally, an actual power system fault was served to verify the proposed method.

A general method to determine sampling windows for nonlinear mixed effects models with an application to population pharmacokinetic studies

Optimal design methods have been proposed to determine the best sampling times when sparse blood sampling is required in clinical pharmacokinetic studies. However, the optimal blood sampling time points may not be feasible in clinical practice. Sampling windows, a time interval for blood sample collection, have been proposed to provide flexibility in blood sampling times while preserving efficient parameter estimation. Because of the complexity of the population pharmacokinetic models, which are generally nonlinear mixed effects models, there is no analytical solution available to determine sampling windows. We propose a method for determination of sampling windows based on MCMC sampling techniques. The proposed method attains a stationary distribution rapidly and provides time-sensitive windows around the optimal design points. The proposed method is applicable to determine sampling windows for any nonlinear mixed effects model although our work focuses on an application to population pharmacokinetic models.

Why the construction quality of design-build projects is not satisfactory : a Queensland study

Design-build (DB) system is well-known to be a popular and effective delivery method of construction work worldwide. It has been demonstrated as superior to the traditional delivery system in regards to time and cost performance. However, it suffers a major flaw, in that the performance of project quality cannot be guaranteed. This paper aims to investigate the underlying factors attributing to the poor quality performance of design-build projects in Queensland. Five major factors were first identified through a comprehensive literature review, which relate to (1) project briefing and scope definition, (2) client’s role and responsibility, (3) procurement selection, (4) contractor’s incentive, and (5) design document quality. A questionnaire survey with 127 DB professionals was conducted to determine how these factors affect various quality criteria, i.e. functional quality, architectural quality, technical quality, workmanship quality, client satisfaction and overall quality. With the architectural quality reduced greatly, the research findings reveal that the DB projects in Queensland have the reduced overall quality compared with traditional projects. The impacts of different factors on the quality performance of DB projects have been closely examined and summarized. The research findings will facilitate project stakeholder’s better understanding of the delivery process of the DB system and provide guidelines to improve the quality performance.

Assessment of “change in flexibility method” in structural health monitoring systems

The modern structural diagnosis process is rely on vibration characteristics to assess safer serviceability level of the structure. This paper examines the potential of change in flexibility method to use in damage detection process and two main practical constraints associated with it. The first constraint addressed in this paper is reduction in number of data acquisition points due to limited number of sensors. Results conclude that accuracy of the change in flexibility method is influenced by the number of data acquisition points/sensor locations in real structures. Secondly, the effect of higher modes on damage detection process has been studied. This addresses the difficulty of extracting higher order modal data with available sensors. Four damage indices have been presented to identify their potential of damage detection with respect to different locations and severity of damage. A simply supported beam with two degrees of freedom at each node is considered only for a single damage cases throughout the paper.

Spelling instruction through Etymology : a method of developing spelling lists for older students

The purpose of this study was to investigate whether an approach to developing word lists centred on etymological roots would improve the spelling performance of older primary school students. Participants were 46 students in the last year of primary school in south-east Queensland (31 girls and 15 boys) across three classes, with two classes being assigned to control conditions. Students were evaluated pre- and post-intervention on three dependent measures: British Spelling Test Series spelling, spelling in writing and writing. The results of this intervention revealed improvements in spelling for girls but not for boys. The implications for improved teaching methods are discussed.

Using process models to support design of airport terminals

The complex design process of airport terminal needs to support a wide range of changes in operational facilities for both usual and unusual/emergency events. Process model describes how activities within a process are connected and also states logical information flow of the various activities. The traditional design process overlooks the necessity of information flow from the process model to the actual building design, which needs to be considered as a integral part of building design. The current research introduced a generic method to obtain design related information from process model to incorporate with the design process. Appropriate integration of the process model prior to the design process uncovers the relationship exist between spaces and their relevant functions, which could be missed in the traditional design approach. The current paper examines the available Business Process Model (BPM) and generates modified Business Process Model(mBPM) of check-in facilities of Brisbane International airport. The information adopted from mBPM then transform into possible physical layout utilizing graph theory.

Removal of toxic metals in a multi metal system using sorbents for potential application to urban stormwater treatment

In the context of increasing demand for potable water and the depletion of water resources, stormwater is a logical alternative. However, stormwater contains pollutants, among which metals are of particular interest due to their toxicity and persistence in the environment. Hence, it is imperative to remove toxic metals in stormwater to the levels prescribed by drinking water guidelines for potable use. Consequently, various techniques have been proposed, among which sorption using low cost sorbents is economically viable and environmentally benign in comparison to other techniques. However, sorbents show affinity towards certain toxic metals, which results in poor removal of other toxic metals. It was hypothesised in this study that a mixture of sorbents that have different metal affinity patterns can be used for the efficient removal of a range of toxic metals commonly found in stormwater. The performance of six sorbents in the sorption of Al, Cr, Cu, Pb, Ni, Zn and Cd, which are the toxic metals commonly found in urban stormwater, was investigated to select suitable sorbents for creating the mixtures. For this purpose, a multi criteria analytical protocol was developed using the decision making methods: PROMETHEE (Preference Ranking Organisation METHod for Enrichment Evaluations) and GAIA (Graphical Analysis for Interactive Assistance). Zeolite and seaweed were selected for the creation of trial mixtures based on their metal affinity pattern and the performance on predetermined selection criteria. The metal sorption mechanisms employed by seaweed and zeolite were defined using kinetics, isotherm and thermodynamics parameters, which were determined using the batch sorption experiments. Additionally, the kinetics rate-limiting steps were identified using an innovative approach using GAIA and Spearman correlation techniques developed as part of the study, to overcome the limitation in conventional graphical methods in predicting the degree of contribution of each kinetics step in limiting the overall metal removal rate. The sorption kinetics of zeolite was found to be primarily limited by intraparticle diffusion followed by the sorption reaction steps, which were governed mainly by the hydrated ionic diameter of metals. The isotherm study indicated that the metal sorption mechanism of zeolite was primarily of a physical nature. The thermodynamics study confirmed that the energetically favourable nature of sorption increased in the order of Zn < Cu < Cd < Ni < Pb < Cr < Al, which is in agreement with metal sorption affinity of zeolite. Hence, sorption thermodynamics has an influence on the metal sorption affinity of zeolite. On the other hand, the primary kinetics rate-limiting step of seaweed was the sorption reaction process followed by intraparticle diffusion. The boundary layer diffusion was also found to limit the metal sorption kinetics at low concentration. According to the sorption isotherm study, Cd, Pb, Cr and Al were sorbed by seaweed via ion exchange, whilst sorption of Ni occurred via physisorption. Furthermore, ionic bonding is responsible for the sorption of Zn. The thermodynamics study confirmed that sorption by seaweed was energetically favourable in the order of Zn < Cu < Cd < Cr . Al < Pb < Ni. However, this did not agree with the affinity series derived for seaweed suggesting a limited influence of sorption thermodynamics on metal affinity for seaweed. The investigation of zeolite-seaweed mixtures indicated that mixing sorbents have an effect on the kinetics rates and the sorption affinity. Additionally, the theoretical relationships were derived to predict the boundary layer diffusion rate, intraparticle diffusion rate, the sorption reaction rate and the enthalpy of mixtures based on that of individual sorbents. In general, low coefficient of determination (R2) for the relationships between theoretical and experimental data indicated that the relationships were not statistically significant. This was attributed to the heterogeneity of the properties of sorbents. Nevertheless, in relative terms, the intraparticle diffusion rate, sorption reaction rate and enthalpy of sorption had higher R2 values than the boundary layer diffusion rate suggesting that there was some relationship between the former set of parameters of mixtures and that of sorbents. The mixture, which contained 80% of zeolite and 20% of seaweed, showed similar affinity for the sorption of Cu, Ni, Cd, Cr and Al, which was attributed to approximately similar sorption enthalpy of the metal ions. Therefore, it was concluded that the seaweed-zeolite mixture can be used to obtain the same affinity for various metals present in a multi metal system provided the metal ions have similar enthalpy during sorption by the mixture.

An empirical study of business method patent applications filed in Australia 2000-2009

This article sets out the results of an empirical research study into the uses to which the Australian patent system is being put in the early 21st century. The focus of the study is business method patents, which are of interest because they are a controversial class of patent that are thought to differ significantly from the mechanical, chemical and industrial inventions that have traditionally been the mainstay of the patent system. The purpose of the study is to understand what sort of business method patent applications have been lodged in Australia in the first decade of this century and how the patent office is responding to those applications.

A least squares based finite volume method for the Cahn-Hilliard and Cahn-Hilliard-reaction equations

A vertex-centred finite volume method (FVM) for the Cahn-Hilliard (CH) and recently proposed Cahn-Hilliard-reaction (CHR) equations is presented. Information at control volume faces is computed using a high-order least-squares approach based on Taylor series approximations. This least-squares problem explicitly includes the variational boundary condition (VBC) that ensures that the discrete equations satisfy all of the boundary conditions. We use this approach to solve the CH and CHR equations in one and two dimensions and show that our scheme satisfies the VBC to at least second order. For the CH equation we show evidence of conservative, gradient stable solutions, however for the CHR equation, strict gradient-stability is more challenging to achieve.

Heterosexual and nonheterosexual young university students’ involvement in traditional and cyber forms of bullying

Research has consistently found that school students who do not identify as self-declared completely heterosexual are at increased risk of victimization by bullying from peers. This study examined heterosexual and nonheterosexual university students’ involvement in both traditional and cyber forms of bullying, as either bullies or victims. Five hundred twenty-eight first-year university students (M= 19.52 years old) were surveyed about their sexual orientation and their bullying experiences over the previous 12 months. The results showed that nonheterosexual young people reported higher levels of involvement in traditional bullying, both as victims and perpetrators, in comparison to heterosexual students. In contrast, cyberbullying trends were generally found to be similar for heterosexual and nonheterosexual young people. Gender differences were also found. The implications of these results are discussed in terms of intervention and prevention of the victimization of nonheterosexual university students.

Victims’ perceptions of traditional and cyberbullying, and the psychosocial correlates of their victimisation

It is well recognised that there are serious correlates for victims of traditional bullying. These have been shown to include increased levels of depression, anxiety and psychosomatic symptoms, in addition to often severe physical harm and even suicide. Bullied students also feel more socially ineffective; have greater interpersonal difficulties, together with higher absenteeism from school and lower academic competence. In the emerging field of cyberbullying many researchers have hypothesised a greater impact and more severe consequences for victims because of the 24/7 nature and the possibility of the wider audience with this form of bullying. However, to date there is scarce empirical evidence to support this. This study sought to compare victims’ perceptions of the harshness and impact of bullying by traditional and cyber means. The major findings showed that although students who had been victimised by traditional bullying reported that they felt their bullying was harsher, crueller and had more impact on their lives than those students who had been cyberbullied, the correlates of their mental health revealed that cyber victims reported significantly more social difficulties, higher anxiety levels and depression than traditional victims. The implications for school counsellors and mental health workers are discussed.