Working paper on the eLAC 2018 Digital Agenda in consideration of Caribbean priorities for technology-supported development

eLAC 2018 will coordinate the implementation of programmes to support the use of information and communications technologies (ICTs) in achieving social and economic development goals for Latin America in the Caribbean during the 2015-2018 timeframe. The conceptual framework for this programme of work is described by the eLAC 2018 Digital Agenda, which is anticipated to be ratified by the fifth Ministerial Conference on the Information Society in Latin America and the Caribbean, to be held in August 2015 in Mexico City. There is a need for broader input from Caribbean countries to the eLAC 2018 Digital Agenda. Accordingly, this working paper reviews the document’s current draft, considering each of its objectives in the context of Caribbean development needs. Amendments are recommended to 12 of the objectives. Two additional objectives are also proposed, in the areas of regional coordination on universal service funds, and the establishment of a spatial data infrastructure to support the use of geographic information systems. Representatives of Caribbean countries are invited to use the contents of this document as an input to the development of their own proposed amendments for inclusion in the final version of the eLAC 2018 Digital Agenda.

Análise experimental de copolímero na estabilidade primária de implantes osseointegráveis: avaliação microscópica em ratos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comportamento mecânico de sistemas prótese/implante em região dos elementos finitos e interferometria holográfica

Pós-graduação em Odontologia - FOAR

Avaliação da inclinação dentária compensatória em indivíduos portadores de má oclusão do padrão III não tratados ortodonticamente

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Comparação entre o periodontal screening and recording e parâmetros clínicos e radiográficos associados às doenças periodontais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo do desajuste angular e vertical em próteses fixas implantossuportadas por meio do MEF-3D

Pós-graduação em Odontologia - FOA

Estudo in vitro das micro deformações ao redor de implantes suportes de próteses parciais fixas submetidos à cargas axiais e não axiais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Quality of life in patients with Charcot-Marie-Tooth disease type 1A

Avaliou-se o comprometimento funcional de pacientes com Charcot-Marie-Tooth provenientes da duplicação 17p11.2-p12 (CMT1A), utilizando o SF-36, que é um questionário para medir a qualidade de vida. Vinte e cinco pacientes de ambos os sexos com idades ≥10 anos e diagnóstico molecular de CMT1A foram selecionados. Idade, sexo, condições sociodemográficas e profissionais foram pareados com o Grupo Controle (sem histórico familiar de neuropatia). Os resultados mostraram que o maior impacto da CMT1A na qualidade de vida ocorreu nos domínios social e emocional dos pacientes avaliados. A capacidade funcional também tende a ser significativamente afetada, enquanto outros indicadores de deficiência física foram preservados. Por fim, os aspectos sociais e emocionais dos pacientes acometidos por CMT1A costumam ser negligenciados na assistência médica prestada aos pacientes brasileiros, e devem ser melhor compreendidos a fim de oferecer uma assistência global à saúde, resultando em adequada qualidade de vida.

Resistência à fratura entre a resina acrílica e a resina composta em coroas provisórias implanto-suportadas unitárias imediatas anteriores: estudo in vitro

Pós-graduação em Reabilitação Oral - FOAR

Effects of Light Activation, Agent Concentration, and Tooth Thickness on Dental Sensitivity After Bleaching

Examining three bleaching systems, this in vivo clinical trial evaluated the relationship among tooth sensitivity, light activation, and agent concentration, and it correlated dental sensitivity with tooth thickness.Materials and Methods: Eighty-seven volunteer patients were included. Inclusion criteria were the presence of anterior teeth without restorations as well as the absence of a previous bleaching experience and absence of non-carious cervical lesions or dental pain. Exclusion criteria included pregnancy or breastfeeding, a maximum of TF3 hypoplasia, tetracycline-fluorosis stains, malpositioned teeth, orthodontic treatment, periodontal disease, and/or analgesic/anti-inflammatory intake. Patients were randomly assigned to three bleaching groups: Group A (n=25) was treated with 15% H2O2 and nitrogenous-titanium-dioxide and was light activated (Lase Peroxide Lite, DMC, SaoCarlos, Sao Paulo, Brazil); Group B (n=27) was treated with 35% H2O2 and was light activated (Lase Peroxide Sensy, DMC); and Group C (n=35) was treated with 35% H2O2 (White Gold Office, Dentsply, 38West Clark Ave., Milford, USA) without light activation. Tooth sensitivity (TS) was self-reported by the patients using the visual analog scale (VAS) at baseline (TSO), immediately after treatment (TSI), and at seven days after treatment (TS7). In 46 patients, tooth thickness was determined by computed tomography. TSO, TSI, and TS7 were compared between the A and B groups to determine the effect of concentration and between the B and C groups to determine the effect of light using analysis of covariance. The correlation between tooth thickness and TSI was determined by Spearman Rho test (SPSS 15).Results: Eighty-seven patients were evaluated at baseline, and 61 were evaluated at seven days. Separated by groups, tooth sensitivity, expressed as VAS value at the time points TS0, TS1, and TS7, respectively, were as follows: Group A: 13.76 +/- 13.53, 24.40 +/- 25.24, and 5.94 +/- 5.5; Group B: 15.07 +/- 18.14, 42.4 +/- 31.78, and 8.68 +/- 17.99; and Group C: 10.80 +/- 14.83, 31.51 +/- 29.34, and 7.24 +/- 9.2. Group A showed significantly lower tooth sensitivity than group B at TSI (p=0.032). No differences were observed in the tooth sensitivities between groups B and C. No correlation was encountered between tooth thickness and tooth sensitivity immediately after treatment (Rho=-0.088,p=0.563). The median tooth thickness was 2.78 +/- 0.21 mm.Conclusions: Increases in the concentration of bleaching agents directly affect tooth sensitivity, and LED/laser activation and tooth thickness are not correlated with tooth sensitivity after dental bleaching.

Analysis of the electrical characteristics and surge protection of EHV transmission lines supported by tall towers

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rehabilitation of the Maxillary Arch After Bone Graft Using Immediate Loading With Implant-Supported Fixed Restoration

Moderate and controlled loading environments support or enhance osteogenesis, and, consequently, a high degree of bone-to-implant contact can be acquired. This is because when osteoprogenitor cells are exposed to limited physical deformation, their differentiation into osteoblasts is enhanced. Then, some range of microstrain is considered advantageous for bone ingrowth and osseointegration. The primary stability has been considered one of the main clinical means of controlling micromotion between the implant and the forming interfacial tissue, which helps to establish the proper mechanical environment for osteogenesis. Based on the biological aspects of immediate loading (IL), the objective of this study is to present a clinical case of maxillary arch rehabilitation using immediate loading with implant-supported fixed restoration after bone graft. Ten dental implants were placed in the maxilla 6 months after the autogenous bone graft, removed from the mandible (bilateral oblique line and chin), followed by the installation of an immediate-load fixed cross-arch implant-supported restoration because primary stability was reached for 8 implants. In addition, instructions about masticatory function and how it is related to interfacial micromotion were addressed and emphasized to the patient. The reasons for the IL were further avoidance of an interim healing phase, a potential reduction in the number of clinical interventions for the patient, and aesthetic reasons. After monitoring the rehabilitation for 8 years, the authors can conclude that maxillary IL can be performed followed by a well-established treatment planning based on computed tomography, providing immediate esthetics and function to the patient even when autogenous bone graft was previously performed in the maxilla.

Stress analysis in oral obturator prostheses over parallel and tilted implants: photoelastic imaging

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Abutment Screw Surface Treatment on Reliability of Implant-Supported Crowns

Purpose: To evaluate and compare the reliability of implant-supported single crowns cemented onto abutments retained with coated (C) or noncoated (NC) screws and onto platform-switched abutments with coated screws. Materials and Methods: Fifty-four implants (DT Implant 4-mm Standard Platform, Intra-Lock International) were divided into three groups (n = 18 each) as follows: matching-platform abutments secured with noncoated abutment screws (MNC); matching-platform abutments tightened with coated abutment screws (MC); and switched-platform abutments secured with coated abutment screws (SC). Screws were characterized by scanning electron microscopy and x-ray photoelectron spectroscopy (XPS). The specimens were subjected to step-stress accelerated life testing. Use-level probability Weibull curves and reliability for 100,000 cycles at 200 N and 300 N (90% two-sided confidence intervals) were calculated. Polarized light and scanning electron microscopes were used for fractographic analysis. Results: Scanning electron microscopy revealed differences in surface texture; noncoated screws presented the typical machining grooves texture, whereas coated screws presented a plastically deformed surface layer. XPS revealed the same base components for both screws, with the exception of higher degrees of silicon in the SiO2 form for the coated samples. For 100,000 cycles at 300 N, reliability values were 0.06 (0.01 to 0.16), 0.25 (0.09 to 0.45), and 0.25 (0.08 to 0.45), for MNC, MC, and SC, respectively. The most common failure mechanism for MNC was fracture of the abutment screw, followed by bending, or its fracture, along with fracture of the abutment or implant. Coated abutment screws most commonly fractured along with the abutment, irrespective of abutment type. Conclusion: Reliability was higher for both groups with the coated screw than with the uncoated screw. Failure modes differed between coated and uncoated groups.

Non-linear 3D finite element analysis of full-arch implant-supported fixed dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)