Uroradiological screening for upper and lower urinary tract anomalies in patients with hypospadias: a systematic literature review.

INTRODUCTION: Hypospadias is associated with anomalies of the urinary tract, but the exact prevalence and significance of these anomalies are still controversial. OBJECTIVES: To assess the percentage of patients with hypospadias and associated urological anomalies, either requiring or not requiring medical or surgical attention. MATERIAL AND METHODS: We searched several databases using the following Mesh terms: hypospadias AND urination, ultrasonography, urinary tract/abnormalities, urinary bladder/radiography, ureteral obstruction, hydronephrosis or vesico-ureteral reflux. Type of uroradiological studies performed, type of urological anomalies, medical or surgical interventions, number of patients available, enrolled and undergoing uroradiological studies and number of patients with abnormal uroradiological exams were recorded. RESULTS: We found 24 studies. Four studies included 100% of available patients. In the other ones, the percentage of patients undergoing uroradiological screening varied from 12 to 82%. Frequency of anomalies varied from 0 to 56%. The most common anomalies were kidney position anomalies, vesico-ureteral reflux and hydronephrosis. CONCLUSIONS: The data published about screening patients with hypospadias for associated anomalies of their urinary tract are of poor quality. The clinical significance of the anomalies found is difficult to evaluate. We found no relationship between the severity of the hypospadias and associated anomalies of the upper or lower urinary tract.

Efficacy, safety and tolerability of linezolid containing regimens in treating MDR-TB and XDR-TB: systematic review and meta-analysis.

Linezolid is used off-label to treat multidrug-resistant tuberculosis (MDR-TB) in absence of systematic evidence. We performed a systematic review and meta-analysis on efficacy, safety and tolerability of linezolid-containing regimes based on individual data analysis. 12 studies (11 countries from three continents) reporting complete information on safety, tolerability, efficacy of linezolid-containing regimes in treating MDR-TB cases were identified based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Meta-analysis was performed using the individual data of 121 patients with a definite treatment outcome (cure, completion, death or failure). Most MDR-TB cases achieved sputum smear (86 (92.5%) out of 93) and culture (100 (93.5%) out of 107) conversion after treatment with individualised regimens containing linezolid (median (inter-quartile range) times for smear and culture conversions were 43.5 (21-90) and 61 (29-119) days, respectively) and 99 (81.8%) out of 121 patients were successfully treated. No significant differences were detected in the subgroup efficacy analysis (daily linezolid dosage ≤600 mg versus >600 mg). Adverse events were observed in 63 (58.9%) out of 107 patients, of which 54 (68.4%) out of 79 were major adverse events that included anaemia (38.1%), peripheral neuropathy (47.1%), gastro-intestinal disorders (16.7%), optic neuritis (13.2%) and thrombocytopenia (11.8%). The proportion of adverse events was significantly higher when the linezolid daily dosage exceeded 600 mg. The study results suggest an excellent efficacy but also the necessity of caution in the prescription of linezolid.

Toward a novel forensic intelligence model: systematic profiling of false identity documents

False identity documents represent a serious threat through their production and use in organized crime and by terrorist organizations. The present-day fight against this criminal problem and threats to national security does not appropriately address the organized nature of this criminal activity, treating each fraudulent document on its own during investigation and the judicial process, which causes linkage blindness and restrains the analysis capacity. Given the drawbacks of this case-by-case approach, this article proposes an original model in which false identity documents are used to inform a systematic forensic intelligence process. The process aims to detect links, patterns, and tendencies among false identity documents in order to support strategic and tactical decision making, thus sustaining a proactive intelligence-led approach to fighting identity document fraud and the associated organized criminality. This article formalizes both the model and the process, using practical applications to illustrate its powerful capabilities. This model has a general application and can be transposed to other fields of forensic science facing similar difficulties.

Defining publication bias: protocol for a systematic review of highly cited articles and proposal for a new framework.

BACKGROUND: Selective publication of studies, which is commonly called publication bias, is widely recognized. Over the years a new nomenclature for other types of bias related to non-publication or distortion related to the dissemination of research findings has been developed. However, several of these different biases are often still summarized by the term 'publication bias'. METHODS/DESIGN: As part of the OPEN Project (To Overcome failure to Publish nEgative fiNdings) we will conduct a systematic review with the following objectives:- To systematically review highly cited articles that focus on non-publication of studies and to present the various definitions of biases related to the dissemination of research findings contained in the articles identified.- To develop and discuss a new framework on nomenclature of various aspects of distortion in the dissemination process that leads to public availability of research findings in an international group of experts in the context of the OPEN Project.We will systematically search Web of Knowledge for highly cited articles that provide a definition of biases related to the dissemination of research findings. A specifically designed data extraction form will be developed and pilot-tested. Working in teams of two, we will independently extract relevant information from each eligible article.For the development of a new framework we will construct an initial table listing different levels and different hazards en route to making research findings public. An international group of experts will iteratively review the table and reflect on its content until no new insights emerge and consensus has been reached. DISCUSSION: Results are expected to be publicly available in mid-2013. This systematic review together with the results of other systematic reviews of the OPEN project will serve as a basis for the development of future policies and guidelines regarding the assessment and prevention of publication bias.

Systematic review protocol to define classical IgE-associated diseases from birth to adolescence: the MeDALL study

BACKGROUND: Classical disease phenotypes are mainly based on descriptions of symptoms and the hypothesis that a given pattern of symptoms provides a diagnosis. With refined technologies there is growing evidence that disease expression in patients is much more diverse and subtypes need to be defined to allow a better targeted treatment. One of the aims of the Mechanisms of the Development of Allergy Project (MeDALL,FP7) is to re-define the classical phenotypes of IgE-associated allergic diseases from birth to adolescence, by consensus among experts using a systematic review of the literature and identify possible gaps in research for new disease markers. This paper describes the methods to be used for the systematic review of the classical IgE-associated phenotypes applicable in general to other systematic reviews also addressing phenotype definitions based on evidence. METHODS/DESIGN: Eligible papers were identified by PubMed search (complete database through April 2011). This search yielded 12,043 citations. The review includes intervention studies (randomized and clinical controlled trials) and observational studies (cohort studies including birth cohorts, case-control studies) as well as case series. Systematic and non-systematic reviews, guidelines, position papers and editorials are not excluded but dealt with separately. Two independent reviewers in parallel conducted consecutive title and abstract filtering scans. For publications where title and abstract fulfilled the inclusion criteria the full text was assessed. In the final step, two independent reviewers abstracted data using a pre-designed data extraction form with disagreements resolved by discussion among investigators. DISCUSSION: The systematic review protocol described here allows to generate broad,multi-phenotype reviews and consensus phenotype definitions. The in-depth analysis of the existing literature on the classification of IgE-associated allergic diseases through such a systematic review will 1) provide relevant information on the current epidemiologic definitions of allergic diseases, 2) address heterogeneity and interrelationships and 3) identify gaps in knowledge.

Early diagnosis of osteoporosis by means of orthopantomograms and oral x-rays: a systematic review

Osteoporosis is a systemic bone disease that is characterized by a generalized reduction of the bone mass. It is the main cause of fractures in elderly women. Bone densitometry is used in the lumbar spine and hip in order to detect osteoporosis in its early stages. Different studies have observed a correlation between the bone mineral density of the jaw (BMD) and that of the lumbar spine and/or hip. On the other hand, there are studies that evaluate the findings in the orthopantomograms and perapical X-rays, correlating them with the early diagnosis of osteoporosis and highlighting the role of the dentist in the early diagnosis of this disease. Materials and methods: A search was carried out in the Medline-Pubmed database in order to identify those articles that deal with the association between the X-ray findings observed in the orthopantomograms and the diagnosis of the osteoporosis, as well as those that deal with the bone mineral density of the jaw. Results: There were 406 articles, and with the limits established, this number was reduced to 21. Almost all of the articles indicate that when examining oral X-rays, it is possible to detect signs indicative of osteoporosis. Discussion: The radiomorphometric indices use measurements in orthopantomograms and evaluate possible loss of bone mineral density. They can be analyzed alone or along with the visual indices. In the periapical X-rays, the photodensimetric analyses and the trabecular pattern appear to be the most useful. There are seven studies that analyze the densitometry of the jaw, but only three do so independently of the photodensitometric analysis. Conclusions: The combination of mandibular indices, along with surveys on the risk of fracture, can be useful as indicators of early diagnosis of osteoporosis. Visual and morphometric indices appear to be especially important in the orthopantomograms. Photodensitometry indices and the trabecular pattern are used in periapical X-rays. Studies on mandibular dual-energy X-ray absorptiometry are inconclusive

Ohjelmistotuotteen asiakasversioiden tuotannon ja hallinnan tehostaminen

Työssä tutkittiin menetelmiätehostaa ohjelmistotuotteen asiakasversioiden tuotantoa ja hallintaa. Työ toteutettiin ohjelmistoyrityksessä ja sen ohjelmistotuotteet olivat tutkimuksen ensisijaisena kohteena. Päätavoitteena työssä oli luoda järjestelmällinen menetelmä hallita tuotteisiin ja niiden asiakasversioihin liittyviä tietoja. Toissijaisena tavoitteena oli etsiä ratkaisuja haasteisiin, joita tuotteesta tehtävien asiakasversioiden tuottaminen ja ylläpitäminen aiheuttavat. Työssä todettiin, että tuotteen hallittavuuden ja laadun kannalta on äärimmäisen tärkeääkäyttää mahdollisimman paljon yhteisiä komponentteja tuotteen asiakasversioissa. Useissa tapauksissa asiakasversioiden väliset erot voidaan toteuttaa tekemällätuotteen komponenteista konfiguroitavia. Eri konfigurointitapoja ja -kohteita on esitelty. Työssä havaittiin muutostenhallintaprosessin tärkeyden kasvavan tuotteen asiakkaiden määrän kasvaessa. Ylläpidonaikaisten, usein toistuvien toimenpiteiden automatisointi ja ohjeistava dokumentointi huomattiin tärkeäksi tehostamiskeinoksi. Tuotteen asiakasversioiden välisten eroavaisuuksien dokumentoinnin havaittiin parantavan tuotteen hallittavuutta. Työssä toteutettiin järjestelmä tuotteisiin ja asiakkaisiin liittyvien tietojen ylläpitoa varten. Järjestelmän todettiin vähentävän hallintatoimenpiteisiin kuluvaa aikaa. Järjestelmän tarjoaman keskitetyn tiedonhallinnan havaittiin yhtenäistävän eri tuotteiden tiedonhallintaa ja parantavan tuotteiden laatua. Järjestelmä tukee toiminnallisuuksillaan asiakasversioiden toimitusten tekemistä vähentäen niiden aikana tapahtuvia virheitä. Tämä nostaa tuotteiden laatua. Järjestelmään toteutettiin tuotteiden konfigurointia tehostavia toiminnallisuuksia. Kyseisten toiminnallisuuksien todettiin vähentävän konfigurointiin kuluvaa aikaa ja parantavan tuotteidenlaatua.

Systematic review of evidence and consensus on diverticulitis: an analysis of national and international guidelines.

AIM: The study aimed to analyse the currently available national and international guidelines for areas of consensus and contrasting recommendations in the treatment of diverticulitis and thereby to design questions for future research. METHOD: MEDLINE, EMBASE and PubMed were systematically searched for guidelines on diverticular disease and diverticulitis. Inclusion was confined to papers in English and those < 10 years old. The included topics were classified as consensus or controversy between guidelines, and the highest level of evidence was scored as sufficient (Oxford Centre of Evidence-Based Medicine Level of Evidence of 3a or higher) or insufficient. RESULTS: Six guidelines were included and all topics with recommendations were compared. Overall, in 13 topics consensus was reached and 10 topics were regarded as controversial. In five topics, consensus was reached without sufficient evidence and in three topics there was no evidence and no consensus. Clinical staging, the need for intraluminal imaging, dietary restriction, duration of antibiotic treatment, the protocol for abscess treatment, the need for elective surgery in subgroups of patients, the need for surgery after abscess treatment and the level of the proximal resection margin all lack consensus or evidence. CONCLUSION: Evidence on the diagnosis and treatment of diverticular disease and diverticulitis ranged from nonexistent to strong, regardless of consensus. The most relevant research questions were identified and proposed as topics for future research.

The Effect of Tax Revenue Budgeting Errors on Fiscal Balance : Evidence from Swiss cantons

This study is an empirical analysis of the impact of direct tax revenue budgeting errors on fiscal deficits. Using panel data from 26 Swiss cantons between 1980 and 2002, we estimate a single equation model on the fiscal balance, as well as a simultaneous equation model on revenue and expenditure. We use new data on budgeted and actual tax revenue to show that underestimating tax revenue significantly reduces fiscal deficits. Furthermore, we show that this effect is channeled through decreased expenditure. The effects of over and underestimation turn out to be symmetric.

Practical applications of a systematic approach to the chemical abatement of pollutants in water and air

The present dissertation is devoted to the systematic approach to the development of organic toxic and refractory pollutants abatement by chemical decomposition methods in aqueous and gaseous phases. The systematic approach outlines the basic scenario of chemical decomposition process applications with a step-by-step approximation to the most effective result with a predictable outcome for the full-scale application, confirmed by successful experience. The strategy includes the following steps: chemistry studies, reaction kinetic studies in interaction with the mass transfer processes under conditions of different control parameters, contact equipment design and studies, mathematical description of the process for its modelling and simulation, processes integration into treatment technology and its optimisation, and the treatment plant design. The main idea of the systematic approach for oxidation process introduction consists of a search for the most effective combination between the chemical reaction and the treatment device, in which the reaction is supposed to take place. Under this strategy,a knowledge of the reaction pathways, its products, stoichiometry and kinetics is fundamental and, unfortunately, often unavailable from the preliminary knowledge. Therefore, research made in chemistry on novel treatment methods, comprisesnowadays a substantial part of the efforts. Chemical decomposition methods in the aqueous phase include oxidation by ozonation, ozone-associated methods (O3/H2O2, O3/UV, O3/TiO2), Fenton reagent (H2O2/Fe2+/3+) and photocatalytic oxidation (PCO). In the gaseous phase, PCO and catalytic hydrolysis over zero valent ironsare developed. The experimental studies within the described methodology involve aqueous phase oxidation of natural organic matter (NOM) of potable water, phenolic and aromatic amino compounds, ethylene glycol and its derivatives as de-icing agents, and oxygenated motor fuel additives ¿ methyl tert-butyl ether (MTBE) ¿ in leachates and polluted groundwater. Gas-phase chemical decomposition includes PCO of volatile organic compounds and dechlorination of chlorinated methane derivatives. The results of the research summarised here are presented in fifteenattachments (publications and papers submitted for publication and under preparation).

Introducing Basic Systematic Requirements Engineering Practices in Small Organizations with an Easy to Adopt Method

Requirements-relatedissues have been found the third most important risk factor in software projects and as the biggest reason for software project failures. This is not a surprise since; requirements engineering (RE) practices have been reported deficient inmore than 75% of all; enterprises. A problem analysis on small and low maturitysoftware organizations revealed two; central reasons for not starting process improvement efforts: lack of resources and uncertainty; about process improvementeffort paybacks.; In the constructive part of the study a basic RE method, BaRE, was developed to provide an; easy to adopt way to introduce basic systematic RE practices in small and low maturity; organizations. Based on diffusion of innovations literature, thirteen desirable characteristics; were identified for the solution and the method was implemented in five key components:; requirements document template, requirements development practices, requirements; management practices, tool support for requirements management, and training.; The empirical evaluation of the BaRE method was conducted in three industrial case studies. In; this evaluation, two companies established a completely new RE infrastructure following the; suggested practices while the third company conducted continued requirements document; template development based on the provided template and used it extensively in practice. The; real benefits of the adoption of the method were visible in the companies in four to six months; from the start of the evaluation project, and the two small companies in the project completed; their improvement efforts with an input equal to about one person month. The collected dataon; the case studies indicates that the companies implemented new practices with little adaptations; and little effort. Thus it can be concluded that the constructed BaRE method is indeed easy to; adopt and it can help introduce basic systematic RE practices in small organizations.

Origins of production errors and significance of employee empowerment in reducing production error amount in sheet metal fabricating industry

The market place of the twenty-first century will demand that manufacturing assumes a crucial role in a new competitive field. Two potential resources in the area of manufacturing are advanced manufacturing technology (AMT) and empowered employees. Surveys in Finland have shown the need to invest in the new AMT in the Finnish sheet metal industry in the 1990's. In this run the focus has been on hard technology and less attention is paid to the utilization of human resources. In manymanufacturing companies an appreciable portion of the profit within reach is wasted due to poor quality of planning and workmanship. The production flow production error distribution of the sheet metal part based constructions is inspectedin this thesis. The objective of the thesis is to analyze the origins of production errors in the production flow of sheet metal based constructions. Also the employee empowerment is investigated in theory and the meaning of the employee empowerment in reducing the overall production error amount is discussed in this thesis. This study is most relevant to the sheet metal part fabricating industrywhich produces sheet metal part based constructions for electronics and telecommunication industry. This study concentrates on the manufacturing function of a company and is based on a field study carried out in five Finnish case factories. In each studied case factory the most delicate work phases for production errors were detected. It can be assumed that most of the production errors are caused in manually operated work phases and in mass production work phases. However, no common theme in collected production error data for production error distribution in the production flow can be found. Most important finding was still that most of the production errors in each case factory studied belong to the 'human activity based errors-category'. This result indicates that most of the problemsin the production flow are related to employees or work organization. Development activities must therefore be focused to the development of employee skills orto the development of work organization. Employee empowerment gives the right tools and methods to achieve this.

Identifying quantitative operation principles in metabolic pathways: a systematic method for searching feasible enzyme activity patterns leading to cellular adaptive responses

Background: Optimization methods allow designing changes in a system so that specific goals are attained. These techniques are fundamental for metabolic engineering. However, they are not directly applicable for investigating the evolution of metabolic adaptation to environmental changes. Although biological systems have evolved by natural selection and result in well-adapted systems, we can hardly expect that actual metabolic processes are at the theoretical optimum that could result from an optimization analysis. More likely, natural systems are to be found in a feasible region compatible with global physiological requirements. Results: We first present a new method for globally optimizing nonlinear models of metabolic pathways that are based on the Generalized Mass Action (GMA) representation. The optimization task is posed as a nonconvex nonlinear programming (NLP) problem that is solved by an outer- approximation algorithm. This method relies on solving iteratively reduced NLP slave subproblems and mixed-integer linear programming (MILP) master problems that provide valid upper and lower bounds, respectively, on the global solution to the original NLP. The capabilities of this method are illustrated through its application to the anaerobic fermentation pathway in Saccharomyces cerevisiae. We next introduce a method to identify the feasibility parametric regions that allow a system to meet a set of physiological constraints that can be represented in mathematical terms through algebraic equations. This technique is based on applying the outer-approximation based algorithm iteratively over a reduced search space in order to identify regions that contain feasible solutions to the problem and discard others in which no feasible solution exists. As an example, we characterize the feasible enzyme activity changes that are compatible with an appropriate adaptive response of yeast Saccharomyces cerevisiae to heat shock Conclusion: Our results show the utility of the suggested approach for investigating the evolution of adaptive responses to environmental changes. The proposed method can be used in other important applications such as the evaluation of parameter changes that are compatible with health and disease states.

First systematic chemical profiling of cocaine police seizures in Finland in the framework of an intelligence-led approach

For the first time in Finland, the chemical profiling of cocaine specimens was performed at the National Bureau of Investigation (NBI). The main goals were to determine the chemical composition of cocaine specimens sold in the Finnish market and to study the distribution networks of cocaine in order to provide intelligence related to its trafficking. An analytical methodology enabling through one single GC-MS injection the determination of the added cutting agents (adulterants and diluents), the cocaine purity and the chemical profile (based on the major and minor alkaloids) for each specimen was thus implemented and validated. The methodology was found to be efficient for the discrimination between specimens coming from the same source and specimens coming from different sources. The results highlighted the practical utility of the chemical profiling, especially for supporting the investigation through operational intelligence and improving the knowledge related to the cocaine trafficking through strategic intelligence.

Clinical features for diagnosis of pneumonia in children younger than 5 years: a systematic review and meta-analysis.

BACKGROUND: Pneumonia is the biggest cause of deaths in young children in developing countries, but early diagnosis and intervention can effectively reduce mortality. We aimed to assess the diagnostic value of clinical signs and symptoms to identify radiological pneumonia in children younger than 5 years and to review the accuracy of WHO criteria for diagnosis of clinical pneumonia. METHODS: We searched Medline (PubMed), Embase (Ovid), the Cochrane Database of Systematic Reviews, and reference lists of relevant studies, without date restrictions, to identify articles assessing clinical predictors of radiological pneumonia in children. Selection was based on: design (diagnostic accuracy studies), target disease (pneumonia), participants (children aged <5 years), setting (ambulatory or hospital care), index test (clinical features), and reference standard (chest radiography). Quality assessment was based on the 2011 Quality Assessment of Diagnostic Accuracy Studies (QUADAS-2) criteria. For each index test, we calculated sensitivity and specificity and, when the tests were assessed in four or more studies, calculated pooled estimates with use of bivariate model and hierarchical summary receiver operation characteristics plots for meta-analysis. FINDINGS: We included 18 articles in our analysis. WHO-approved signs age-related fast breathing (six studies; pooled sensitivity 0·62, 95% CI 0·26-0·89; specificity 0·59, 0·29-0·84) and lower chest wall indrawing (four studies; 0·48, 0·16-0·82; 0·72, 0·47-0·89) showed poor diagnostic performance in the meta-analysis. Features with the highest pooled positive likelihood ratios were respiratory rate higher than 50 breaths per min (1·90, 1·45-2·48), grunting (1·78, 1·10-2·88), chest indrawing (1·76, 0·86-3·58), and nasal flaring (1·75, 1·20-2·56). Features with the lowest pooled negative likelihood ratio were cough (0·30, 0·09-0·96), history of fever (0·53, 0·41-0·69), and respiratory rate higher than 40 breaths per min (0·43, 0·23-0·83). INTERPRETATION: Not one clinical feature was sufficient to diagnose pneumonia definitively. Combination of clinical features in a decision tree might improve diagnostic performance, but the addition of new point-of-care tests for diagnosis of bacterial pneumonia would help to attain an acceptable level of accuracy. FUNDING: Swiss National Science Foundation.