948 resultados para Synthetic Hybrids
Resumo:
Two experiments with 25 maize commercial hybrids were carried out in a direct sowing system in Southern Brazil in the harvests of 2009/2010 and 2010/2011. Quantitative descriptors were used with the objective of determining the genetic divergence and the relative contributions of traits among hybrids for extraction of inbred lines. This study was carried out in Oxisol soil using a randomized block design with four replicates. Data were subjected to combined analysis of variance, and based on the multivariate analyses, Tocher and average linkage (UPGMA) cluster analyses, based on generalized distance of Mahalanobis, to quantify divergence in addition to Singh criterion to validate trait with the most contribution. The multivariate methods were consistent with each other, and the weight of 100 grains was the trait that contributed most to the divergence and had similar behavior in grain yield between hybrids in both years. Furthermore, this descriptor representing significant genetic variability for crossings and lines extraction to hybridization between BM 3061, ATL 200 and P 30B39 Y.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The steady-state average run length is used to measure the performance of the recently proposed synthetic double sampling (X) over bar chart (synthetic DS chart). The overall performance of the DS X chart in signaling process mean shifts of different magnitudes does not improve when it is integrated with the conforming run length chart, except when the integrated charts are designed to offer very high protection against false alarms, and the use of large samples is prohibitive. The synthetic chart signals when a second point falls beyond the control limits, no matter whether one of them falls above the centerline and the other falls below it; with the side-sensitive feature, the synthetic chart does not signal when they fall on opposite sides of the centerline. We also investigated the steady-state average run length of the side-sensitive synthetic DS X chart. With the side-sensitive feature, the overall performance of the synthetic DS X chart improves, but not enough to outperform the non-synthetic DS X chart. Copyright (C) 2014 John Wiley &Sons, Ltd.
Resumo:
Synthetic-heterodyne demodulation is a useful technique for dynamic displacement and velocity detection in interferometric sensors, as it can provide an output signal that is immune to interferometric drift. With the advent of cost-effective, high-speed real-time signal-processing systems and software, processing of the complex signals encountered in interferometry has become more feasible. In synthetic heterodyne, to obtain the actual dynamic displacement or vibration of the object under test requires knowledge of the interferometer visibility and also the argument of two Bessel functions. In this paper, a method is described for determining the former and setting the Bessel function argument to a set value, which ensures maximum sensitivity. Conventional synthetic-heterodyne demodulation requires the use of two in-phase local oscillators; however, the relative phase of these oscillators relative to the interferometric signal is unknown. It is shown that, by using two additional quadrature local oscillators, a demodulated signal can be obtained that is independent of this phase difference. The experimental interferometer is aMichelson configuration using a visible single-mode laser, whose current is sinusoidally modulated at a frequency of 20 kHz. The detected interferometer output is acquired using a 250 kHz analog-to-digital converter and processed in real time. The system is used to measure the displacement sensitivity frequency response and linearity of a piezoelectric mirror shifter over a range of 500 Hz to 10 kHz. The experimental results show good agreement with two data-obtained independent techniques: the signal coincidence and denominated n-commuted Pernick method.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Objectives: The aim of this study is to report on the treatment of mandibular Class II furcation defects with enamel matrix protein derivative (EMD) combined with a beta TCP/HA (beta-tricalcium phosphate/hydroxyapatite) alloplastic material. Method and Materials: Thirteen patients were selected. All patients were nonsmokers, systemically healthy, and diagnosed with chronic periodontitis; had not taken medications known to interfere with periodontal tissue health and healing; presented one Class II mandibular furcation defect with horizontal probing equal to or greater than 4 mm at buccal site. The clinical parameters evaluated were probing depth (PD), relative gingival margin position (RGMP), relative vertical clinical attachment level (RVCAL), and relative horizontal clinical attachment level (RHCAL). A paired Student t test was used to detect differences between the baseline and 6-month measurements, with the level of significance of .05. Results: After 6 months, the treatment produced a statistically significant reduction in PD and a significant gain in RVCAL and RHCAL, but no observable change in RGMP. RVCAL ranged from 13.77 (+/- 1.31) at baseline to 12.15 (+/- 1.29) after 6 months, with a mean change of -1.62 +/- 1.00 mm (P<.05). RHCAL ranged from 5.54 (+/- 0.75) to 2.92 (+/- 0.92), with a mean change of -2.62 +/- 0.63 mm (P<.05). After 6 months, 76.92% of the patients improved their diagnosis to Class I furcation defects while 23.08% remained as Class II. Conclusion: The present study has shown that positive clinical results may be expected from the combined treatment of Class II furcation defects with EMD and beta TCP/HA, especially considering the gain of horizontal attachment level. Despite this result, controlled clinical studies are needed to confirm our outcomes.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The objective of this work was to evaluate the performance of three Japanese group cucumber hybrids, which were cultivated in two cultivation systems. The experiment was designed in a split-plot randomized block design with two cultivation systems (coconut fiber and soil) for commercial Japanese cucumber hybrids ('Tsuyataro', 'Yoshinari' and 'Nankyoku'). After harvesting the cucumbers, we evaluated the number of marketable fruits per plant, the average fruit length, the mean fruit diameter, the bottom fruit diameter, the marketable production of fruits per plant and the marketable yield per hectare. There were significant interactions between the cultivation system and the hybrid, as indicated by the number of marketable fruits. The Nankyoku hybrid had the highest average (14.54 fruits pl(-1)), although it did not differ from the Yoshinari hybrid when grown in coconut fiber. In soil culture, the Yoshinari hybrid had the highest average number of fruits per plant (10.12 fruits pl(-1)) and did not differ from the Tsuyataro hybrid. Cultivation in coconut fiber provided better results for production traits and plant productivity. 'Yoshinari' and 'Nankyoku' were the most productive hybrids. Based on the cucumber cultivation results from a protected environment, the cultivation of hybrid Japanese cucumbers and Yoshinari and Nankyoku hybrids in coconut fiber is recommended.
Resumo:
The synaptonemal complex (SC) was analyzed in four F1 hybrids of Bos taurus taurus and B. taurus indicus including Gyr-Simmental (G-S), Nelore Simmental (N-S), Gyr-Holstein-Friesian (G-H) and Nelore-Piemontese (N-P). We analysed the frequency of various types of SC abnormalities and the frequency of cells with SC abnormalities. The results were compared with similar observations made on purebred animals. All the animals studied possessed 29 autosomal and one sex bivalent. The frequency of cells with abnormalities in the hybrids were 28.0% in the N-P, 29.1% in the G-S, 33.3% in the N-S and 40.0% in the G-H. The frequency of cells with abnormalities in the four hybrids was 31.5%; 57.9% of these abnormalities occurred in zygotene and 42.0% occurred in pachytene. The comparisons among the hybrids and among the hybrids and their parental breeds showed that the only significant difference was between Gyr and Gyr-Holstein-Friesian animals. Some aspects of the relationship between the frequency of cells with anomalies and the fertility of hybrids are discussed.
Resumo:
Assuming massive constituent gluons the mass spectroscopy of glueballs and hybrids is analysed in the framework of the potential model. Only pairwise potentials are considered.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Results of photoluminescence measurements for natural and synthetic alexandrite (BeAl2O4:Cr3+) are presented, where the samples are excited by the 488 nm line of an Ar+ laser, at different temperatures. The main issue is the analysis of the Cr3+ transition in the chrysoberyl matrix (BeAl2O4), with major technological application as active media for laser action. Results indicate anomalous behavior of Cr3+ transition depending on the measurement temperature. A simple model to explain the phenomena is suggested.
Resumo:
Tambaqui (Colossoma macropomum) is the fish species most commonly raised in the Brazilian fish farms. The species is highly adaptable to captive conditions, and is both fast-growing and relatively fecund. In recent years, artificial breeding has produced hybrids with Characiform species, known as “Tambacu” and “Tambatinga”. Identifying hybrids is a difficult process, given their morphological similarities with the parent species. This study presents an innovative molecular approach to the identification of hybrids based primarily on Multiplex PCR of a nuclear gene (a-Tropomyosin), which was tested on 93 specimens obtained from fish farms in northern Brazil. The sequencing of a 505-bp fragment of the Control Region (CR) permitted the identification of the maternal lineage of the specimen, all of which corresponded to C. macropomum. Unexpectedly, only two CR haplotype were found in 93 samples, a very low genetic diversity for the pisciculture of Tambaqui. Multiplex PCR identified 42 hybrids, in contrast with 23 identified by the supplier on the basis of external morphology. This innovative tool has considerable potential for the development of the Brazilian aquaculture, given the possibility of the systematic identification of the genetic traits of both fry-producing stocks, and the fry and juveniles raised in farms.
Resumo:
This study examined the effectiveness of leuprolide, a gonadotrophin-releasing hormone agonist, in suppressing rut-associated events in farmed male red deer. In mid-January (~6 weeks before the rut period in the southern hemisphere) adult red deer (Cervus elaphus scoticus) stags that had been allocated to three groups (n = 10 per group) received leuprolide, administered subcutaneously in a 90-day release formulation, at zero (control), low (22.5 mg) or high (45 mg) doses. Following treatment with leuprolide there was evidence of suppression of mean plasma luteinising hormone concentration that was significant (P < 0.05) at 9 weeks. Mean plasma testosterone concentration of all three groups rose following treatment, then declined prematurely in the low- and high-dose leuprolide-treated groups, so that it was significantly (P < 0.05) suppressed (0.66 ± 0.29 and 2.0 ± 0.88 ng mL–1, low and high dose respectively) in early April when the peak value (9.0 ± 1.94 ng mL–1) was recorded from control stags. A reduction in mean liveweight occurred in all three groups through February–April and this did not differ among treatments. However, a corresponding reduction in mean body condition score was greater in the control stags (P < 0.05). There was little effect of leuprolide treatment on aggressive behaviours, but it lowered roaring frequency in the latter period of the rut. The results indicate that this gonadotrophin-releasing hormone agonist has potential for application in the deer farming industry to suppress undesirable effects of the rut.