Green logistics: key elements for a well-functioning sustainable logistics system

A growing awareness of the modern society about the direct relationship between a growing global community with increasing total industrial activities on one hand and various environmental problems and a natural limitation of natural resources on the other hand set the base for sustainable or “green” approaches within the supply chain. This paper therefore will look at the issue of “Green Logistics” which seeks to reduce the environmental impact of logistics activities by taking into account functions such as recycling, waste and carbon emission reduction and the use of alternative sources of energy. In order to analyze how these approaches and ideas are being perceived by the system as a whole two models from the area of prospective and scenario planning are being used and described to identify the main drivers and tendencies within the system in order to create feasible hypothesis. Using the URCA/CHIVAS model allows us to identify the driver variables out of a high number of variables that best describe the system “Green Logistics”. Followed by the analysis of the actor’s strategies in the system with the Mactor model it is possible to reduce the complexity of a completely holistic system to a few key drivers that can be analyzed further on. Here the implications of URCA/CHIVAS and Mactor are being used to formulate hypotheses about the perception of Green Logistics and its successful implementation among logistics decision makers by an online survey. This research seeks to demonstrate the usefulness of scenario planning to a highly complex system observing it from all angles and extracting information about the relevant factors of it. The results of this demonstration indicate that there are drivers much beyond the factory walls that need to be considered when implementing successfully a system such as Green Logistics.

Extinction, pollution, and the sustainable use of exhaustible and renewable resources

Single ownership of natural resources is conunon in many developing countries and socialist economies. The sole owner is usually the .state or society at large, and governments are responsible for either distributing exploitation rights or engaging in exploitation through their own corporations. • Under this circumstance, the notion of externality may not fully explain pollution problems existent in these nations. This paper studies the case where a single agent owns both exhaustible and renewable resources, and attempts to maximize its welfare. The resources are either perfect or imperfect substitutes. Initially, exhaustible resource extraction does not affect the renewable resource, and sustainable growth is attainable. A lactor of pollution flowing from the extraction of the nc.nrenewable resource into the growth of the renewable resource is introduced. The continuous exploitation of the exhaustible resource leads to the " optimal " extinction of the renewable resource, and sustainable growth is no longer reached. Regulation from a supra governmental agency such as an multinational institution may prove to be of utmost importance, if sustainability is to be achieved. The paper is divided into five sections. Section two provides a brief survey of the relevant literature. Section three presents the model without pollution. This factor is introduced in section four. The final section discusses some possible approaches for attaining sustainable growth, and contains the concluding remarks .

Sustainable miracles : protection and competition in the Brazilian oil industry

It is often suggested that competition improves productivity, however, the underlying support for this idea is surprisingly thin. This paper presents a case study examining the e ects of a change in the competitive environment on productivity at the Petrobras, Brazil's state-owned oil company. Petrobras had a legal monopoly on production, re ning, transportation and importation of oil in Brazil until it was removed in 1995. Even though Petrobras continues to have a de facto monopoly, the end of legal monopoly labor productivity growth rate more than doubled. A growth accounting of the industry shows that between 1977 and 1993 output growth rate (and productivity growth rate) is explained by the accumulation of capital, while Total Factor Productivity (TFP) decreased. Between 1994 and 2000 labor productivity growth rate is completely explained by the growth rate of TFP. The results suggest that the threat of competition alone is su cient to improve productivity. They also provide evidence that restricting competition help cause Brazil's depression of the 1980s.

Sustainable silvopastoral systems: theory and a practical case

Muitas transformações são esperadas por causa das mudanças do clima, especialmente das atividades agrícolas realizadas nos trópicos. Esta tese centra-se em dois aspectos. O primeiro deles é o de reunir o conhecimento de sistemas silvipastoris; este ponto de vista estabelece a importância de solos tropicais e sua gestão adequada de acordo com as normas ambientais e sustentáveis. A segunda parte da tese é a aplicação desses princípios em um caso específico: a fazenda "El Paraíso". O objetivo central ou problema a resolver da segunda parte é propor um projeto para melhorar as atividades de produção de carne e, ao mesmo tempo, ajudar a preservar e melhorar o meio ambiente e especialmente os ecossistemas tropicais. A metodologia utilizada na tese foi buscar e analisar informações sobre o assunto. Depois disso, a investigação experimental e de campo foi realizada para levantar o projeto que combinaria as duas partes da obra. No final, com a informação recolhida uma proposta de projeto foi feita. O objetivo era propor a transformação dos processos de produção na fazenda selecionada. Logo de desenvolver e apresentar o projeto, foram analisadas as possibilidades de implementação do projeto. A conclusão do estudo foi o de apresentar e discutir três cenários possíveis após a implementação. Finalmente, a conclusão geral apresenta as realizações, as oportunidades e possíveis expansões futuras do projeto.

The Brazilian financial system and the green economy : alignment with sustainable development

Three studies were prepared and are presented in this document. The first, The Brazilian Financial Sector Institutional Context in the Transition to Sustainable Development looks at the legislation, regulation, and public policies aimed at socio-environmental themes related to the financial sector. The second study, Current Financing for the Green Economy in Brazil, provides an initial estimate of the financial assets already allocated to the green economy, as well as a methodological proposal for the survey and monitoring of the respective flow of assets. The third and final study looks at two important segments of the Brazilian economy and their process of transition to a greener economy: renewable energy and agriculture.

Impact assessment and quality analysis of corporate social responsability (CSR) programs of mining companies and their contribution to sustainable development in the communities they operate: case study Tenke Fungurume Mining SA in the Democratic Republic of Congo (DRC)

Purpose – This case study presents an impact assessment of Corporate Social Responsibility (CSR) programs of the TFM Company in order to understand how they contribute to the sustainable development of communities in areas in which they operate. Design/Methodology/Approach - Data for this study was collected using qualitative data methods that included semi-structured interviews and Focus Group Discussions most of them audio and video recorded. Documentary analysis and a field visit were also undertaken for the purpose of quality analysis of the CSR programs on the terrain. Data collected was analyzed using the Seven Questions to sustainability (7Qs) framework, an evaluation tool developed by the Mining, Minerals and Sustainable Development (MMSD) North America chapter. Content analysis method was on the other hand used to examine the interviews and FGDs of the study participants. Findings - Results shows that CSR programs of TFM SA do contribute to community development, as there have been notable changes in the communities’ living conditions. But whether they have contributed to sustainable development is not yet the case as programs that enhance the capacity of communities and other stakeholders to support these projects development beyond the implementation stage and the mines operation lifetime need to be considered and implemented. Originality/Value – In DRC, there is paucity of information of research studies that focus on impact assessment of CSR programs in general and specifically those of mining companies and their contribution to sustainable development of local communities. Many of the available studies cover issues of minerals and conflict or conflict minerals as mostly referred to. This study addressees this gap.

Motivating sustainable goal choices and providing effective feedback

Overconsumption of natural resources and the associated environmental hazards are one of today’s most pressing global issues. In the western world, individual consumption in homes and workplaces is a key contributor to this problem. Reflecting the importance of individual action in this domain, this thesis focuses on studying and influencing choices related to sustainability and energy consumption made by people in their daily lives. There are three main components to this work. Firstly, this thesis asserts that people frequently make ineffective consumption reduction goal choices and attempts to understand the rationale for these poor choices by fitting them to goalsetting theory, an established theoretical model of behavior change. Secondly, it presents two approaches that attempt to influence goal choice towards more effective targets, one of which deals with mechanisms for goal priming and the other of which explores the idea that carefully designed toys can exert influence on children’s long term consumption behavior patterns. The final section of this thesis deals with the design of feedback to support the performance of environmentally sound activities. Key contributions surrounding goals include the finding that people choose easy sustainable goals despite immediate feedback as to their ineffectiveness and the discussion and study of goal priming mechanisms that can influence this choice process. Contributions within the design of value instilling toys include a theoretically grounded framework for the design of such toys and a completed and tested prototype toy. Finally, contributions in designing effective and engaging energy consumption feedback include the finding that negative feedback is best presented verbally compared with visually and this is exemplified and presented within a working feedback system. The discussions, concepts, prototypes and empirical findings presented in this work will be useful for both environmental psychologists and for HCI researchers studying eco-feedback.

Natureza morta...edifício com vida: uma arquitetura sustentável para o Serviço de Verificação de Óbitos

Sustainability in buildings, while reducing the impact on the environment, contributes to the promotion of social welfare, to increase the health and productivity of occupants. The search for a way of build that meets the aspirations and development of humanity without, however, represent degradation of the environment, has become the great challenge of contemporary architecture. It is considered that the incorporation of principles that provide a sustainable building with careful choices of design solutions contribute to a better economic and thermal performance of the building, as well as functional and psychological comfort to its users. Based on this general understanding, this paper presents an architecture project aimed to health care whose the solutions adopted follow carefully the relevant legislation and sets his sights on the theme of sustainability. The methodology began with studies on the themes of verification service of deaths, sustainability and those application in construction developed through research in academic studies and analysis of architectural projects, using them like reference for the solutions adopted. Within the project analysis was performed a visit to the verification service of deaths in the city of Palmas in Tocantins, subsidizing information that, plus the relevant legislation, led to functional programming and pre-dimensional of the building to be designed. The result of this programming environments were individual records with information from environmental restrictions, space required for the development of activities, desirable flow and sustainability strategies, that can be considered as the first product of relevance of the professional master's degree. Finally we have outlined the basic design architecture of a Verification Service of Death SVO/RN (in portuguese), whose process of projecting defined as a guiding line of work four points: the use of bioclimatic architecture as the main feature projectual, the use of resources would provide minimal harm to the environment, the use of modulation and structure to the building as a form of rationalization and finally the search for solutions that ensure environmental and psychological comfort to users. Importantly to highlight that, besides owning a rare theme in literature that refers to architectural projects, the whole project was drawn up with foundations in projective criteria that contribute to environmental sustainability, with emphasis on thermal performance, energy efficiency and reuse of rainwater

Sistema de gestão ambiental na produção de água mineral

It s more and more evident the subject of the shortage of water, worsened by the accelerated urbanization, growth of the population, increase of the demand and of the costs of its treatment, factors that are also tied up to the increase of the consumption of mineral waters, whose chemical composition or physical-chemistries characteristics do with that are considered beneficial to the health. The growth accelerated all over the world in its consumption aims the concern with the waters quality, the health and the incentive to the consumption of natural products. However, in spite of quite valuable, that resource is explored, most of the time, without optimization of production or actions that avoid wastefulness. This research is justified for the need of minimizing the negative environmental impacts caused by the mineral water s production, mainly in what it say about the generation of effluents and wastes in the productive process, through the study, development and application of cleaner production tools for the environmental management, pertinent for that section. The applicability of Environmental Management System was determined by means of the characterization of the environmental aspects of productive process in a company of the section, in the state of Rio Grande do Norte and of the discussion of the panoramas that demonstrate the tendency for a sustainable development. Actions as a reforestation, optimization of energy and water uses, recycle of solid residues and water reuse were applied during the research, resulting in the considerable reduction of wastes of raw materials and inputs and consequent environmental and economic won. A specific methodology was proposed with concepts of Environmental Management, integrating with Quality Management. As foundations for the elaboration of the methodology, it was realized a similarity analysis among the systems and, mainly, an analysis of the experiences observed in the case study, including specificities, needs and difficulties of the company. With these results, the implantation of a EMS as a company strategy has environmental, economic and social benefits, and this research can be applied and adequate to others companies and sectors

Análise do desempenho térmico de sistema constutivo de concreto com EPS como agregado graúdo

In the last decades there was a concentrate effort of researchers in the search for options to the problem of the continuity of city development and environmental preservation. The recycling and reuse of materials in industry have been considerate as the best option to sustainable development. One of the relevant aspects in this case refers to the rational use of electrical energy. At this point, the role of engineering is to conceive new processes and materials, with the objective of reducing energy consumption and maintaining, at the same time the benefits of the technology. In this context, the objective of the present research is to analyze quantitatively the thermal behavior of walls constructed with concrete blocks which composition aggregates the expanded polystyrene (EPS) reused in the shape of flakes and in the shape of a board, resulting in a “light concrete”. Experiments were conducted, systematically, with a wall (considerate as a standard) constructed with blocks of ordinary concrete; two walls constructed with blocks of light concrete, distinct by the proportion of EPS/sand; a wall of ceramic bricks (“eight holes” type) and a wall with ordinary blocks of cement, in a way to obtain a comparative analysis of the thermal behavior of the systems. Others tests conducted with the blocks were: stress analysis and thermal properties analysis (ρ, cp e k). Based on the results, it was possible to establish quantitative relationship between the concentration (density) of EPS in the constructive elements and the decreasing of the heat transfer rate, that also changes the others thermal properties of the material, as was proved. It was observed that the walls of light concrete presents better thermal behavior compared with the other two constructive systems world wide used. Based in the results of the investigation, there was shown the viability of the use of EPS as aggregate (raw material) in the composition of the concrete, with the objective of the fabrication of blocks to non-structural masonry that works as a thermal insulation in buildings. A direct consequence of this result is the possibility of reduction of the consume of the electrical energy used to climatization of buildings. Other aspect of the investigation that must be pointed was the reuse of the EPS as a raw material to civil construction, with a clear benefit to reducing of environmental problems

Utilização de membranas no pós-tratamento de esgotos para reuso do permeado e aproveitamento do concentrado

The use of membrane filters in the post-treatment of sewage has been increasingly employed to obtain water quality, applicable to various forms of reuse. Despite the advantages presented using the permeate membranes, such as saving water and reducing water pollution, the concentrate generated in the process ends up being an inconvenience to the deployment of this technology due to lack of sustainable solutions for their management. Thus, the main objective of this research was to evaluate the use of membranes for microfiltration, ultrafiltration, nanofiltration and reverse osmosis concentrated in agriculture, using it as liquid fertilizer. The permeated membranes were also assessed in order to identify activities in which they could be reused. Five configurations were established from four types of membranes, so that each configuration represents a different system. The tests were conducted in batch mode, with triplicate for each configuration. The results indicated that permeated the microfiltration and ultrafiltration can be used in urban areas, in non-potable uses. Have the nanofiltration permeate can be reused in the industry, replacement cooling towers, and other non -potable uses required in the manufacturing unit. The permeate obtained in reverse osmosis met the intended uses for nanofiltration as well as the standards required for boiler feed, adding alkalizing being required to raise the pH to the recommended value. Concentrates generated in nanofiltration and reverse osmosis can be availed as liquid fertilizer in agriculture, but they must be diluted in the irrigation water, in order to adjust the salt concentration allowed for the least tolerant crops patterns

Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials

Sugarcane bagasse ash (SCBA) is a residue resulting from the burning of bagasse in boilers in the sugarcane/alcohol industry. SCBA has a very high silica concentration and contains aluminum, iron, alkalis and alkaline earth oxides in smaller amounts. In this work, the properties of sintered ceramic bodies were evaluated based on the concentration of SCBA, which replaced non-plastic material. The ash was mixed (up to 60 wt%) with a clayed raw material that is used to produce roof tiles. Prismatic probes were pressed and sintered at different temperatures (up to 1200 degrees C). Technological tests of ceramic probes showed that the addition of ash has little influence on the ceramic properties up to 1000 C. X-ray diffraction and thermal analysis data showed that, above this temperature the ash participates in the sintering process and in the formation of new important phases. The results reported show that the reuse of SCBA in the ceramic industry is feasible. (C) 2011 Elsevier Ltd. All rights reserved.