Structural and Resting State Functional Connectivity of the Subthalamic Nucleus: Identification of Motor STN Parts and the Hyperdirect Pathway.

Deep brain stimulation (DBS) for Parkinson's disease often alleviates the motor symptoms, but causes cognitive and emotional side effects in a substantial number of cases. Identification of the motor part of the subthalamic nucleus (STN) as part of the presurgical workup could minimize these adverse effects. In this study, we assessed the STN's connectivity to motor, associative, and limbic brain areas, based on structural and functional connectivity analysis of volunteer data. For the structural connectivity, we used streamline counts derived from HARDI fiber tracking. The resulting tracks supported the existence of the so-called "hyperdirect" pathway in humans. Furthermore, we determined the connectivity of each STN voxel with the motor cortical areas. Functional connectivity was calculated based on functional MRI, as the correlation of the signal within a given brain voxel with the signal in the STN. Also, the signal per STN voxel was explained in terms of the correlation with motor or limbic brain seed ROI areas. Both right and left STN ROIs appeared to be structurally and functionally connected to brain areas that are part of the motor, associative, and limbic circuit. Furthermore, this study enabled us to assess the level of segregation of the STN motor part, which is relevant for the planning of STN DBS procedures.

Therapy modifications in response to poorly controlled hypertension, dyslipidemia, and diabetes mellitus.

BACKGROUND: Poorly controlled cardiovascular risk factors are common. Evaluating whether physicians respond appropriately to poor risk factor control in patients may better reflect quality of care than measuring proportions of patients whose conditions are controlled. OBJECTIVES: To evaluate therapy modifications in response to poor control of hypertension, dyslipidemia, or diabetes in a large clinical population. DESIGN: Retrospective cohort study within an 18-month period in 2002 to 2003. SETTING: Kaiser Permanente of Northern California. PATIENTS: 253,238 adult members with poor control of 1 or more of these conditions. MEASUREMENTS: The authors assessed the proportion of patients with poor control who experienced a change in pharmacotherapy within 6 months, and they defined "appropriate care" as a therapy modification or return to control without therapy modification within 6 months. RESULTS: A total of 64% of patients experienced modifications in therapy for poorly controlled systolic blood pressure, 71% for poorly controlled diastolic blood pressure, 56% for poorly controlled low-density lipoprotein cholesterol level, and 66% for poorly controlled hemoglobin A1c level. Most frequent modifications were increases in number of drug classes (from 70% to 84%) and increased dosage (from 15% to 40%). An additional 7% to 11% of those with poorly controlled blood pressure, but only 3% to 4% of those with elevated low-density lipoprotein cholesterol level or hemoglobin A1c level, returned to control without therapy modification. Patients with more than 1 of the 3 conditions, higher baseline values, and target organ damage were more likely to receive "appropriate care." LIMITATIONS: Patient preferences and suboptimal adherence to therapy were not measured and may explain some failures to act. CONCLUSIONS: As an additional measure of the quality of care, measuring therapy modifications in response to poor control in a large population is feasible. Many patients with poorly controlled hypertension, dyslipidemia, or diabetes had their therapy modified and, thus, seemed to receive clinically "appropriate care" with this new quality measure.

Examining the Agreement of Structural Loss Measured With Heidelberg Retinal Tomograhy and Functional Loss With Standard Automated Perimetry (SAP; Octopus), Pulsar Perimetry (PP), and Moorfields Motion Displacement Test (MDT) Perimetry

Purpose: To examine the relationship of functional measurements with structural measures. Methods: 146 eyes of 83 test subjects underwent Heidelberg Retinal Tomography (HRTIII) (disc area<2.43, mphsd<40), and perimetry testing with Octopus (SAP; Dynamic), Pulsar (PP; TOP) and Moorfields MDT (ESTA). Glaucoma was defined as progressive structural or functional loss (20 eyes). Perimetry test points were grouped into 6 sectors based on the estimated optic nerve head angle into which the associated nerve fiber bundle enters (Garway-Heath map). Perimetry summary measures (PSM) (MD SAP/ MD PP/ PTD MDT) were calculated from the average total deviation of each measured threshold from the normal for each sector. We calculated the 95% significance level of the sectorial PSM from the respective normative data. We calculated the percentage agreement with group1 (G1), healthy on HRT and within normal perimetric limits, and group 2 (G2), abnormal on HRT and outside normal perimetric limits. We also examined the relationship of PSM and rim area (RA) in those sectors classified as abnormal by MRA (Moorfields Regression Analysis) of HRT. Results: The mean age was 65 (range= [37, 89]). The global sensitivity versus specificity of each instrument in detecting glaucomatous eyes was: MDT 80% vs. 88%, SAP 80% vs. 80%, PP 70% vs. 89% and HRT 80% vs. 79%. Highest percentage agreement of HRT (respectively G1, G2, sector) with PSM were MDT (89%, 57%, nasal superior), SAP (83%, 74%, temporal superior), PP (74%, 63%, nasal superior). Globally percentage agreement (respectively G1, G2) was MDT (92%, 28%), SAP (87%, 40%) and PP (77%, 49%). Linear regression showed there was no significant trend globally associating RA and PSM. However, sectorally the supero-nasal sector had a statistically significant (p<0.001) trend with each instrument, the associated r2 coefficients are (MDT 0.38 SAP 0.56 and PP 0.39). Conclusions: There were no significant differences in global sensitivity or specificity between instruments. Structure-function relationships varied significantly between instruments and were consistently strongest supero-nasally. Further studies are required to investigate these relationships in detail.

Structural development of the Tso Morari ultra-high pressure nappe of the Ladakh Himalaya

A continental subduction-related and multistage exhumation process for the Tso Morari ultra-high pressure nappe is proposed. The model is constrained by published thermo-barometry and age data, combined with new geological and tectonic maps. Additionally, observations on the structural and metamorphic evolution of the Tso Morari area and the North Himalayan nappes are presented. The northern margin of the Indian continental crust was subducted to a depth of >90 km below Asia after continental collision some 55 Ma ago. The underthrusting was accompanied by the detachment and accretion of Late Proterozoic to Early Eocene sediments, creating the North Himalayan accretionary wedge, in front of the active Asian margin and the 103-50 Ma Ladakh arc batholith. The basic dikes in the Ordovician Tso Morari granite were transformed to eclogites with crystallization of coesite, some 53 Ma ago at a depth of >90 kin (>27 kbar) and temperatures of 500 to 600 degrees C. The detachment and extrusion of the low density Tso Morari nappe, composed of 70% of the Tso Morari granite and 30% of graywackes with some eclogitic dikes, occurred by ductile pure and simple shear deformation. It was pushed by buoyancy forces and by squeezing between the underthrusted Indian lithosphere and the Asian mantle wedge. The extruding Tso Morari nappe reached a depth of 35 km at the base of the North Himalayan accretionary wedge some 48 Ma ago. There the whole nappe stack recrystallized under amphibolite facies conditions of a Barrovian regional metamorphism with a metamorphic field gradient of 20 degrees C/km. An intense schistosity with a W-E oriented stretching lineation L, and top-to-the E shear criteria and crystallization of oriented sillimanite needles after kyanite, testify to the Tso Morari nappe extrusion and pressure drop. The whole nappe stack, comprising from the base to top the Tso Morari, Tetraogal, Karzok and Mata-Nyimaling-Tsarap nappes, was overprinted by new schistosities with a first N-directed and a second NE-directed stretching lineation L-2 and L-3 reaching the base of the North Himalayan accretionary wedge. They are characterized by top-to-the S and SW shear criteria. This structural overprint was related to an early N- and a younger NE-directed underthrusting of the Indian plate below Asia that was accompanied by anticlockwise rotation of India. The warping of the Tso Morari dome started already some 48 Ma ago with the formation of an extruding nappe at depth. The Tso Morari dome reached a depth of 15 km about 40 Ma ago in the eastern Kiagar La region and 30 Ma ago in the western Nuruchan region. The extrusion rate was of about 3 cm/yr between 53 and 48 Ma, followed by an uplift rate of 1.2 mm/yr between 48 and 30 Ma and of only 0.5 mm/yr after 30 Ma. Geomorphology observations show that the Tso Morari dome is still affected by faults, open regional dome, and basin and pull-apart structures, in a zone of active dextral transpression parallel to the Indus Suture zone.

Structural unemployment

Structural unemployment is due to mismatch between available jobs and workers.We formalize this concept in a simple model of a segmented labor market with searchfrictions within segments. Worker mobility, job mobility and wage bargaining costsacross segments generate structural unemployment. We estimate the contribution ofthese costs to fluctuations in US unemployment, operationalizing segments as statesor industries. Most structural unemployment is due to wage bargaining costs, whichare large but nevertheless contribute little to unemployment fluctuations. Structuralunemployment is as cyclical as overall unemployment and no more persistent, bothin the current and in previous recessions.

Slow recoveries: A structural interpretation

An analysis of the performance of GDP, employment and otherlabor market variables following the troughs in postwar U.S. businesscycles points to much slower recoveries in the three most recentepisodes, but does not reveal any significant change over time in therelation between GDP and employment. This leads us to characterizethe last three episodes as slow recoveries, as opposed to jobless recoveries.We use the estimated New Keynesian model in Galí-Smets-Wouters (2011) to provide a structural interpretation for the slowerrecoveries since the early nineties.

Estimating overidentified, nonrecursive, time-varying coefficients structural VARs

This paper provides a method to estimate time varying coefficients structuralVARs which are non-recursive and potentially overidentified. The procedureallows for linear and non-linear restrictions on the parameters, maintainsthe multi-move structure of standard algorithms and can be used toestimate structural models with different identification restrictions. We studythe transmission of monetary policy shocks and compare the results with thoseobtained with traditional methods.

The effects of structural reforms on productivity and profitability enhancing reallocation: Evidence from Colombia

Estimates for the U.S. suggest that at least in some sectors productivity enhancing reallocationis the dominant factor in accounting for producitivity growth. An open question, particularlyrelevant for developing countries, is whether reallocation is always productivity enhancing. Itmay be that imperfect competition or other barriers to competitive environments imply that thereallocation process is not fully e?cient in these countries. Using a unique plant-levellongitudinal dataset for Colombia for the period 1982-1998, we explore these issues byexamining the interaction between market allocation, and productivity and profitability.Moreover, given the important trade, labor and financial market reforms in Colombia during theearly 1990's, we explore whether and how the contribution of reallocation changed over theperiod of study. Our data permit measurement of plant-level quantities and prices. Takingadvantage of the rich structure of our price data, we propose a sequential mehodology to estimateproductivity and demand shocks at the plant level. First, we estimate total factor productivity(TFP) with plant-level physical output data, where we use downstream demand to instrumentinputs. We then turn to estimating demand shocks and mark-ups with plant-level price data, usingTFP to instrument for output in the inversedemand equation. We examine the evolution of thedistributions of TFP and demand shocks in response to the market reforms in the 1990's. We findthat market reforms are associated with rising overall productivity that is largely driven byreallocation away from low- and towards highproductivity businesses. In addition, we find thatthe allocation of activity across businesses is less driven by demand factors after reforms. Wefind that the increase in aggregate productivity post-reform is entirely accounted for by theimproved allocation of activity.

Asymptotic robust inferences in the analysis of mean and covariance structures

Structural equation models are widely used in economic, socialand behavioral studies to analyze linear interrelationships amongvariables, some of which may be unobservable or subject to measurementerror. Alternative estimation methods that exploit different distributionalassumptions are now available. The present paper deals with issues ofasymptotic statistical inferences, such as the evaluation of standarderrors of estimates and chi--square goodness--of--fit statistics,in the general context of mean and covariance structures. The emphasisis on drawing correct statistical inferences regardless of thedistribution of the data and the method of estimation employed. A(distribution--free) consistent estimate of $\Gamma$, the matrix ofasymptotic variances of the vector of sample second--order moments,will be used to compute robust standard errors and a robust chi--squaregoodness--of--fit squares. Simple modifications of the usual estimateof $\Gamma$ will also permit correct inferences in the case of multi--stage complex samples. We will also discuss the conditions under which,regardless of the distribution of the data, one can rely on the usual(non--robust) inferential statistics. Finally, a multivariate regressionmodel with errors--in--variables will be used to illustrate, by meansof simulated data, various theoretical aspects of the paper.

Spanish monetary policy: A structural VAR analysis

Some past studies analyzed Spanish monetary policy with the standard VAR. Their problem is that this method obliges researchers to impose a certain extreme form of the short run policy rule on their models. Hence, it does not allow researchers to study the possibility of structural changes in this rule, either. This paper overcomes these problems by using the structural VAR. I find that the rule has always been that of partial accommodation. Prior to 1984, it was quite close to money targeting. After 1984, it became closer to the interest rate targeting, with more emphasis on the exchange rate.

Further insights on the French WISC-IV factor structure through Bayesian structural equation modeling

The interpretation of the Wechsler Intelligence Scale for Children-Fourth Edition (WISC-IV) is based on a 4-factor model, which is only partially compatible with the mainstream Cattell-Horn-Carroll (CHC) model of intelligence measurement. The structure of cognitive batteries is frequently analyzed via exploratory factor analysis and/or confirmatory factor analysis. With classical confirmatory factor analysis, almost all crossloadings between latent variables and measures are fixed to zero in order to allow the model to be identified. However, inappropriate zero cross-loadings can contribute to poor model fit, distorted factors, and biased factor correlations; most important, they do not necessarily faithfully reflect theory. To deal with these methodological and theoretical limitations, we used a new statistical approach, Bayesian structural equation modeling (BSEM), among a sample of 249 French-speaking Swiss children (8-12 years). With BSEM, zero-fixed cross-loadings between latent variables and measures are replaced by approximate zeros, based on informative, small-variance priors. Results indicated that a direct hierarchical CHC-based model with 5 factors plus a general intelligence factor better represented the structure of the WISC-IV than did the 4-factor structure and the higher order models. Because a direct hierarchical CHC model was more adequate, it was concluded that the general factor should be considered as a breadth rather than a superordinate factor. Because it was possible for us to estimate the influence of each of the latent variables on the 15 subtest scores, BSEM allowed improvement of the understanding of the structure of intelligence tests and the clinical interpretation of the subtest scores.

Robust T1-Weighted Structural Brain Imaging and Morphometry at 7T Using MP2RAGE.

PURPOSE: To suppress the noise, by sacrificing some of the signal homogeneity for numerical stability, in uniform T1 weighted (T1w) images obtained with the magnetization prepared 2 rapid gradient echoes sequence (MP2RAGE) and to compare the clinical utility of these robust T1w images against the uniform T1w images. MATERIALS AND METHODS: 8 healthy subjects (29.0±4.1 years; 6 Male), who provided written consent, underwent two scan sessions within a 24 hour period on a 7T head-only scanner. The uniform and robust T1w image volumes were calculated inline on the scanner. Two experienced radiologists qualitatively rated the images for: general image quality; 7T specific artefacts; and, local structure definition. Voxel-based and volume-based morphometry packages were used to compare the segmentation quality between the uniform and robust images. Statistical differences were evaluated by using a positive sided Wilcoxon rank test. RESULTS: The robust image suppresses background noise inside and outside the skull. The inhomogeneity introduced was ranked as mild. The robust image was significantly ranked higher than the uniform image for both observers (observer 1/2, p-value = 0.0006/0.0004). In particular, an improved delineation of the pituitary gland, cerebellar lobes was observed in the robust versus uniform T1w image. The reproducibility of the segmentation results between repeat scans improved (p-value = 0.0004) from an average volumetric difference across structures of ≈6.6% to ≈2.4% for the uniform image and robust T1w image respectively. CONCLUSIONS: The robust T1w image enables MP2RAGE to produce, clinically familiar T1w images, in addition to T1 maps, which can be readily used in uniform morphometry packages.