3D dose reconstruction for narrow beams using ion chamber array measurements.

3D dose reconstruction is a verification of the delivered absorbed dose. Our aim was to describe and evaluate a 3D dose reconstruction method applied to phantoms in the context of narrow beams. A solid water phantom and a phantom containing a bone-equivalent material were irradiated on a 6 MV linac. The transmitted dose was measured by using one array of a 2D ion chamber detector. The dose reconstruction was obtained by an iterative algorithm. A phantom set-up error and organ interfraction motion were simulated to test the algorithm sensitivity. In all configurations convergence was obtained within three iterations. A local reconstructed dose agreement of at least 3% / 3mm with respect to the planned dose was obtained, except in a few points of the penumbra. The reconstructed primary fluences were consistent with the planned ones, which validates the whole reconstruction process. The results validate our method in a simple geometry and for narrow beams. The method is sensitive to a set-up error of a heterogeneous phantom and interfraction heterogeneous organ motion.

MEPDG Work Plan Task No. 8: Validation of Pavement Performance Curves for the Mechanistic-Empirical Pavement Design Guide, 2009

The objective of this research is to determine whether the nationally calibrated performance models used in the Mechanistic-Empirical Pavement Design Guide (MEPDG) provide a reasonable prediction of actual field performance, and if the desired accuracy or correspondence exists between predicted and monitored performance for Iowa conditions. A comprehensive literature review was conducted to identify the MEPDG input parameters and the MEPDG verification/calibration process. Sensitivities of MEPDG input parameters to predictions were studied using different versions of the MEPDG software. Based on literature review and sensitivity analysis, a detailed verification procedure was developed. A total of sixteen different types of pavement sections across Iowa, not used for national calibration in NCHRP 1-47A, were selected. A database of MEPDG inputs and the actual pavement performance measures for the selected pavement sites were prepared for verification. The accuracy of the MEPDG performance models for Iowa conditions was statistically evaluated. The verification testing showed promising results in terms of MEPDG’s performance prediction accuracy for Iowa conditions. Recalibrating the MEPDG performance models for Iowa conditions is recommended to improve the accuracy of predictions. ****************** Large File**************************

A Monte Carlo-based procedure for independent monitor unit calculation in IMRT treatment plans.

Intensity-modulated radiotherapy (IMRT) treatment plan verification by comparison with measured data requires having access to the linear accelerator and is time consuming. In this paper, we propose a method for monitor unit (MU) calculation and plan comparison for step and shoot IMRT based on the Monte Carlo code EGSnrc/BEAMnrc. The beamlets of an IMRT treatment plan are individually simulated using Monte Carlo and converted into absorbed dose to water per MU. The dose of the whole treatment can be expressed through a linear matrix equation of the MU and dose per MU of every beamlet. Due to the positivity of the absorbed dose and MU values, this equation is solved for the MU values using a non-negative least-squares fit optimization algorithm (NNLS). The Monte Carlo plan is formed by multiplying the Monte Carlo absorbed dose to water per MU with the Monte Carlo/NNLS MU. Several treatment plan localizations calculated with a commercial treatment planning system (TPS) are compared with the proposed method for validation. The Monte Carlo/NNLS MUs are close to the ones calculated by the TPS and lead to a treatment dose distribution which is clinically equivalent to the one calculated by the TPS. This procedure can be used as an IMRT QA and further development could allow this technique to be used for other radiotherapy techniques like tomotherapy or volumetric modulated arc therapy.

Pieces of Iowa’s Past, January 11, 2012

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. January 11, 2012 THIS WEEK: PROFESSORSHIPS AND STUDENT ENROLLMENT AT THE STATE UNIVERSITY BACKGROUND: The Ninth General Assembly convened January 13, 1862, and adjourned April 8, 1862—an 86-day session. The Brick Capitol in Des Moines had been the seat of government for four years. John R. Needham was the Lt. Governor presiding in the Senate, and Rush Clark was the Speaker of the House of Representatives. The Republican Party had the majority in both the House of Representatives and the Senate. The legislature had 140 members. Samuel Kirkwood was the governor, serving his second term. Governor Kirkwood was the first governor of Iowa to be re-elected to a second term and the first governor to serve nonconsecutive terms. He was 46 at the time of his first Inaugural on January 11, 1860. The 1860 census showed Iowa’s population at 674,913.

Pieces of Iowa’s Past, January 18, 2012

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. January 18, 2012 THIS WEEK: Report by Annie Wittenmyer, State Sanitary Agent BACKGROUND: The 10th General Assembly convened on January 11, 1864, and adjourned on March 29—a 79-day session. There were 138 members in the legislature. The members included 42 Republicans in the Senate and 87 Republicans in the House of Representatives. Democrats numbered four in the Senate and five in the House. Jacob Butler was the Speaker of the House, and Enoch W. Eastman was the Lt. Governor presiding in the Senate. William Stone was Iowa’s governor. Stone was inaugurated on January 14, 1864. He was 36 years old. Governor Stone, a friend of President Abraham Lincoln, rode Lincoln’s funeral train to Springfield, Illinois

Pieces of Iowa’s Past, January 16, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. January 16, 2013 THIS WEEK: Iowa Senator James Harlan Becomes U.S. Senator BACKGROUND: Fifth Iowa General Assembly The Fifth Iowa General Assembly convened December 4, 1854, and adjourned January 26, 1855, a 54-day session. The Democrats numbered 17 members in the Senate and 31 members in the House. The Whigs held 14 seats in the Senate and 40 seats in the House—a total of 102 members. Iowa’s population at the 1850 census was 192,214. Iowa’s President of the Senate was Maturin Fisher and the Speaker of the House of Representatives was Rueben Noble. During the Fifth General Assembly, Stephen P. Hempstead finished his term as Governor and James W. Grimes was sworn in as Iowa’s third governor.

Pieces of Iowa’s Past, January 23, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. January 23, 2013 THIS WEEK: Iowa’s Grasshopper Plague of 1873 BACKGROUND: Fifteen General Assembly The 15th General Assembly convened January 12 and adjourned March 19, 1874—a 67-day session. The Senate had six Democratic members, 34 Republican members, and 10 Independent members. The House of Representatives had six Democratic members, 50 Republican members, and 44 Independent members. There were a total of 150 legislators in Iowa. By 1874, the Capital had been relocated to Des Moines. The legislature had occupied the old Brick Capitol since 1858. Joseph Dysart was the Lieutenant Governor presiding in the Senate, and John Gear was Speaker of the House of Representatives. Iowa’s population at the 1870 federal census had grown to 1,194,020. Both House and Senate journals from the 15th Iowa General Assembly include several references to assisting the destitution brought on by the 1874 plague of grasshoppers in Northwestern Iowa. Senator Perkins, from the Special Committee appointed to inquire into the reports of destitution in the northwestern counties of Iowa, submitted the following report, in part: “We have examined such evidence as is attainable here, and made such inquiries of parties interested in affording temporary relief as were to be met, and are pieces satisfied in our own minds that the case is one of sufficient importance to command the attention of the State.”

Pieces of Iowa’s Past, February 6, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. THIS WEEK: Women’s and Children’s Building BACKGROUND: 35TH IOWA GENERAL ASSEMBLY The Thirty-fifth General Assembly convened January 13 and adjourned April 19, 1913—a 97-day session. Edward Cunningham was Speaker of the House and William Harding was the Lieutenant Governor presiding over the Senate. The Senate had 18 Democratic members and 32 Republican members. The House of Representatives had 66 Republican members and 42 Democratic members. There were a total of 158 members in the General Assembly. Governor Beryl Carroll finished his term in January 1913 and Governor George Clarke was sworn in on January 16, 1913. He was 60 years old. The 1910 federal census showed Iowa’s population at 2,224,771.

Pieces of Iowa’s Past, February 13, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. THIS WEEK: Repealing the Iowa State Census: Looking Back at the 1858 Census BACKGROUND: 45TH IOWA GENERAL ASSEMBLY The Forty-fifth Iowa General Assembly convened January 9 and adjourned April 20, 1933—a 102-day session. Nelson G. Kraschel was the Lieutenant Governor presiding in the Senate. The Senate was evenly divided with 25 Democrats and 25 Republican members. George E. Miller was Speaker of the House. The House of Representatives had 76 Democratic members and 32 Republican members. Daniel Turner finished out his term as Governor and Clyde Herring was inaugurated January 12, 1933, at the age of 53. The federal census of 1930 showed Iowa’s population at 2,470,939.

Pieces of Iowa’s Past, February 20, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. THIS WEEK: Walnut Street Extension, Des Moines, Iowa BACKGROUND: 55TH IOWA GENERAL ASSEMBLY The Fifty-fifth Iowa General Assembly convened January 12 and adjourned April 29, 1953—a 108-day session. The Senate had 46 Republican and four Democratic members. In the House of Representatives, there were 105 Republican and seven Democratic members. Leo Elthon was the Lieutenant Governor presiding over the Senate. William Lynes was Speaker of the House. William Beardsley was Governor. Beardsley was inaugurated for his first term at the age of 47 on January 13, 1949. Iowa’s population at the 1950 census was 2,621,073.

Pieces of Iowa’s Past, February 27, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. THIS WEEK: 1973 Iowa Spring Snow Storm Hits the First Quarter of the Year; the U.S. Energy Crisis Hits the Last Quarter of the Year BACKGROUND: 65TH IOWA GENERAL ASSEMBLY The Sixty-fifth General Assembly was the third General Assembly to meet annually. Prior to the Sixty-third General Assembly, the Iowa Legislature met biennially. The first year of the Sixty-fifth General Assembly convened January 8 and adjourned June 24, 1973—a 168-day session. The second year of the Sixty-fifth General Assembly convened January 14 and adjourned May 4, 1974—a 111-day session. There were 22 Democratic members in the Senate and 44 Democratic members in the House of Representatives. There were 28 Republican members in the Senate and 56 Republican members in the House—a total of 150 legislators. Lieutenant Governor Arthur Neu was presiding in the Senate and Andrew Varley was the Speaker of the House of Representatives. Robert Ray was Iowa’s Governor, having been inaugurated for his first term January 16, 1969, at the age of 40. The 1970 federal census showed Iowa’s population at 2,825,368.

Pieces of Iowa’s Past, March 6, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. THIS WEEK: The Sudden Death of an Iowa Athlete and a Midwest Natural Disaster Marred the 75th Iowa General Assembly BACKGROUND: 75TH IOWA GENERAL ASSEMBLY The first year of the Seventy-fifth Iowa General Assembly convened January 11, 1993, and adjourned May 2, 1993—a 112-day session. The second year of the Seventy-fifth Iowa General Assembly convened January 10, 1994, and adjourned April 20, 1994—a 101-day session. The Senate had 27 Democratic members and 23 Republican members. The House of Representatives had 49 Democratic members and 51 Republican members. The President of the Senate was Leonard Boswell and the Speaker of the House of Representatives was Harold Van Maanen. Terry Branstad was the governor having been inaugurated for his first term on January 14, 1983, at the age of 36. The Federal census of 1990 showed Iowa’s population at 2,776,755.

Pieces of Iowa’s Past, March 13, 2013

Pieces of Iowa’s Past, published by the Iowa State Capitol Tour Guides weekly during the legislative session, features historical facts about Iowa, the Capitol, and the early workings of state government. All historical publications are reproduced here with the actual spelling, punctuation, and grammar retained. THIS WEEK: Judge Reuben Noble Praises the Iowa State Building at the 1893 World’s Columbian Exposition BACKGROUND: REUBEN NOBLE REUBEN NOBLE was born on the 14th of April, 1821, in Ada County, Mississippi, where his father was a farmer. When he was eighteen years of age, Noble began to study law and was admitted to the bar at twenty-one. In 1843, he came to Iowa, making his home at Garnavillo, in Clayton County. In 1854, Noble was elected to the legislature as a free soil Whig and upon the organization of the House was chosen Speaker, serving in the regular session of 1854 and extraordinary session of 1855. At the first Republican State Convention of 1856, he was placed at the head of the ticket for presidential elector. Four years later, he was a delegate to the National Convention that nominated Abraham Lincoln for president. Up to the time of the attempt of the Republicans to remove President Johnson by impeachment, Noble had been a prominent leader of that party. But approving of the policies of the President, he left the Republicans and from that time became a Democrat. In 1866, Noble was nominated by the Democrats for Representative in Congress but was defeated by William B. Allison. In 1886, he was one of the organizers of the Pioneer Lawmakers’ Association and was its first president, never missing a session during the remainder of his life. Noble was the leader of the bar of northeastern Iowa beginning in 1850. As a compliment to his high standing and eminent qualifications as a jurist, the citizens of the Tenth Judicial District elected him to tthe office of district judge in the fall of 1874. (History of Iowa from the Earliest Times to the Beginning of the Twentieth Century/Volume 4)

Strengthening of Existing Single Span Steel Beam and Concrete Deck Bridges, HR-238, Part 1, 1983

The Phase I research, Iowa Department of Transportation (IDOT) Project HR-214, "Feasibility Study of Strengthening Existing Single Span Steel Beam Concrete Deck Bridges," verified that post-tensioning can be used to provide strengthening of the composite bridges under investigation. Phase II research, reported here, involved the strengthening of two full-scale prototype bridges - one a prototype of the model bridge tested during Phase I and the other larger and skewed. In addition to the field work, Phase II also involved a considerable amount of laboratory work. A literature search revealed that only minimal data existed on the angle-plus-bar shear connectors. Thus, several specimens utilizing angle-plus-bar, as well as channels, studs and high strength bolts as shear connectors were fabricated and tested. To obtain additional shear connector information, the bridge model of Phase I was sawed into four composite concrete slab and steel beam specimens. Two of the resulting specimens were tested with the original shear connection, while the other two specimens had additional shear connectors added before testing. Although orthotropic plate theory was shown in Phase I to predict vertical load distribution in bridge decks and to predict approximate distribution of post-tensioning for right-angle bridges, it was questioned whether the theory could also be used on skewed bridges. Thus, a small plexiglas model was constructed and used in vertical load distribution tests and post-tensioning force distribution tests for verification of the theory. Conclusions of this research are as follows: (1) The capacity of existing shear connectors must be checked as part of a bridge strengthening program. Determination of the concrete deck strength in advance of bridge strengthening is also recommended. (2) The ultimate capacity of angle-plus-bar shear connectors can be computed on the basis of a modified AASHTO channel connector formula and an angle-to-beam weld capacity check. (3) Existing shear connector capacity can be augmented by means of double-nut high strength bolt connectors. (4) Post-tensioning did not significantly affect truck load distribution for right angle or skewed bridges. (5) Approximate post-tensioning and truck load distribution for actual bridges can be predicted by orthotropic plate theory for vertical load; however, the agreement between actual distribution and theoretical distribution is not as close as that measured for the laboratory model in Phase I. (6) The right angle bridge exhibited considerable end restraint at what would be assumed to be simple support. The construction details at bridge abutments seem to be the reason for the restraint. (7) The skewed bridge exhibited more end restraint than the right angle bridge. Both skew effects and construction details at the abutments accounted for the restraint. (8) End restraint in the right angle and skewed bridges reduced tension strains in the steel bridge beams due to truck loading, but also reduced the compression strains caused by post-tensioning.

Test result-based sampling: an efficient design for estimating the accuracy of patient safety indicators.

OBJECTIVE: Accuracy studies of Patient Safety Indicators (PSIs) are critical but limited by the large samples required due to low occurrence of most events. We tested a sampling design based on test results (verification-biased sampling [VBS]) that minimizes the number of subjects to be verified. METHODS: We considered 3 real PSIs, whose rates were calculated using 3 years of discharge data from a university hospital and a hypothetical screen of very rare events. Sample size estimates, based on the expected sensitivity and precision, were compared across 4 study designs: random and VBS, with and without constraints on the size of the population to be screened. RESULTS: Over sensitivities ranging from 0.3 to 0.7 and PSI prevalence levels ranging from 0.02 to 0.2, the optimal VBS strategy makes it possible to reduce sample size by up to 60% in comparison with simple random sampling. For PSI prevalence levels below 1%, the minimal sample size required was still over 5000. CONCLUSIONS: Verification-biased sampling permits substantial savings in the required sample size for PSI validation studies. However, sample sizes still need to be very large for many of the rarer PSIs.