Estudo de simulação de reservatórios para o desenvolvimento de um campo do nordeste brasileiro

In the last 16 years emerged in Brazil a segment of independent producers with focus on onshore basins and shallow waters. Among the challenges of these companies is the development of fields with projects with a low net present value (NPV). The objective of this work was to study the technical-economical best option to develop an oil field in the Brazilian Northeast using reservoir simulation. Real geology, reservoir and production data was used to build the geological and simulation model. Due to not having PVT analysis, distillation method test data known as the true boiling points (TBP) were used to create a fluids model generating the PVT data. After execution of the history match, four development scenarios were simulated: the extrapolation of production without new investments, the conversion of a producing well for immiscible gas injection, the drilling of a vertical well and the drilling of a horizontal well. As a result, from the financial point of view, the gas injection is the alternative with lower added value, but it may be viable if there are environmental or regulatory restrictions to flaring or venting the produced gas into the atmosphere from this field or neighboring accumulations. The recovery factor achieved with the drilling of vertical and horizontal wells is similar, but the horizontal well is a project of production acceleration; therefore, the present incremental cumulative production with a minimum rate of company's attractiveness is higher. Depending on the crude oil Brent price and the drilling cost, this option can be technically and financially viable.

Qualidade da água de um reservatório e do solo da zona ripária sob diferentes usos na região semiárida do Rio Grande do Norte

Reservoirs are artificial ecosystems intermediate between rivers and lakes widely used in the Brazilian semiarid region as a way to provide water supply due to the said region’s water scarcity. The use of water from these supply sources for multiple uses, along with occupation and utilization of its riparian zone without proper management, directly influences the increased nutrient flow into aquatic environments, there with contributing to the acceleration of eutrophication. The semi-arid region is characterized by peculiar weather conditions, such as severe evaporation, high temperatures with little variation throughout the year and long water residence time, making it susceptible to prolonged drought occurrence, which tends to concentrate the nutrients in reservoirs, which favors the development of eutrophic conditions. Moreover, it is common soil use and occupation by carrying out activities with potential environmental impact on natural resources such as agriculture, livestock farming and lack of sanitation. The aim of this study is both to evaluate the water quality of the Cruzeta Reservoir, located in the semiarid region of Rio Grande do Norte, during a prolonged drought period, and assess the quality of its riparian zone soil under different uses, by monitoring physical-chemical variables. Along the prolonged drought, high levels of turbidity, suspended solids, nutrients and chlorophyll a were verified as present, therefore featuring low water quality. In the riparian zone of Cruzeta Reservoir, the areas under use of agriculture and livestock farming appeared as one of the main diffuse sources of nutrients to the said reservoir, featuring the highest levels of phosphorus and nitrogen in the soil, originated from decomposition of animal excreta and from the use of fertilizers, creating a tendency to increased eutrophication of such water supply source. The indicators of water and soil quality are useful for monitoring and evaluating the conservation status of natural resources, allowing the control and mitigation of the reservoir eutrophication process. This study confirmed the hypothesis that the reduction of water level, resulting from prolonged drought event, aggravates the symptoms of eutrophication; and also that using the soil under severalways modifies the physic chemical properties of the soil, having livestock farming and agriculture as the usages with greatest potential towards yielding P and N to the aquatic environment.

A simulação como método de ensino de habilidades no curso de medicina: relato de uma experiência com punção lombar

The teaching of the lumbar puncture (LP) technique with simulator is not well systematized in the curricula of medical schools. Studies show that training in the simulator provides learning technical skills, acquisition and retention of knowledge, improve self-confidence of the learner and enables the transfer to clinical practice. We intend this study to introduce simulated training in LP in medical course at the Universidade Federal do Rio Grande do Norte evaluating the experience taking into account quantitative aspects (performance on standardized tests) and qualitative (perception of the students regarding the method and the teaching process learning). The study was conducted in two phases. In the first phase practical training in PL was introduced in the 3rd year of medical school. Seventy-seven students were trained in small groups, guided by a checklist developed in the model Objective Structured Assessment of Technical Skill (OSATS), at this moment they knew they were not under performance evaluation. They were also asked whether they had prior chances to make an LP in patients. At the end of the first phase the students evaluated training in the following areas: teaching technique, simulator realism, time available per group, number of participants per group and relevance to medical practice. In the second phase, two years later, 18 students trained in first stage performed a new LP on the mannequin simulator, and its performance was evaluated through the same checklist of training in order to verify the technical retention. In addition, they answered a multiple choice test about practical aspects of the LP technique. Each participant received individual feedback on their performance at the end of their participation in the study. In the first phase of the study we found that only 4% of students had performed a lumbar puncture in patients until the 3rd year. The training of LP technique with simulator mannequin was considered relevant and the teaching methods was thoroughly evaluated. In the second phase, all participants were successful in implementing the lumbar puncture on the mannequin simulator, compliance with the most steps in a reasonable time, suggesting that would be able to perform the procedure in a patient.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Análise comparativa de diferentes configurações de poços no processo de combustão in-situ

With an increasing number of mature fields, heavy oil recovery has performed one of the great challenges of the oil industry. The Brazilian Northeast, for example, has numerous heavy oil reservoirs are explored with the use of thermal methods. Among the types of methods used for heavy oil, there is the method of in-situ combustion, a technique in which heat is produced within the container, unlike the injection of heated fluid when the heat is generated at the surface and transported to the reservoir. In this type of process, it is common to use vertical wells as injectors and producers. However, methods which use horizontal wells like oil producers are increasingly studied because of greater contact area between the formation and combustion front. Thus, the main objective of this work was to study the different configurations of wells (CIS THAITM and CAGD) in the process of in-situ combustion in oil recovery using a semi-synthetic tank with Brazilian Northeast features. The method "toe-to-heel air injection" (THAITM) is a process of enhanced oil recovery, which is the integration of in-situ combustion with technological advances in drilling horizontal wells. This method uses horizontal wells such as oil producers, keeping vertical injection wells for injecting air. The oil drain process by differential gravitational assisted with combustion (CAGD) is an integrated, in this configuration the horizontal injector well is drilled at the top formation with a horizontal production well in the lower section. The simulations were performed in a commercial program of thermal processes, called "STARS" (Steam, Thermal, and Advanced Processes Reservoir Simulator), the company CMG (Computer Modelling Group). An analysis of the air flow injection was performed and it was found that each method had a maximum injection to the base model, a show that through this air injection limit was reduced cumulative production of oil. Analyses of operating parameters were used: injection flow, configuration and completion of wells. In the sensitivity analysis we found that the air injection flow showed greater influence on THAI method, since the CIS method the completion of the wells was the most influential parameter and CAGD configuration wells showed the greatest influence in the recovered fraction. The economic results have shown that the best case obtained in CAGD method because, despite having higher initial cost showed the best financial return compared to the best cases the CIS and THAI.

Projeto iterativo, simulação, análise e otimização de máquina a relutância variável monofásica

Variable reluctance motors have been increasingly used as an alternative for variable speed and high speed drives in many industrial applications, due to many advantages like the simplicity of construction, robustness, and low cost. The most common applications in recent years are related to aeronautics, electric and hybrid vehicles and wind power generation. This paper explores the theory, operation, design procedures and analysis of a variable reluctance machine. An iterative design methodology is introduced and used to design a 1.25 kW prototype. For the analysis of the machine two methods are used, an analytical method and the finite element simulation. The results obtained by both methods are compared. The results of finite element simulation are used to determine the inductance profiles and torque of the prototype. The magnetic saturation is examined visually and numerically in four critical points of the machine. The data collected in the simulation allow the verification of design and operating limits for the prototype. Moreover, the behavior of the output quantities is analyzed (inductance, torque and magnetic saturation) by variation of physical dimensions of the motor. Finally, a multiobjective optimization using Differential Evolution algorithms and Genetic Algorithms for switched reluctance machine design is proposed. The optimized variables are rotor and stator polar arcs, and the goals are to maximize the average torque, the average torque per copper losses and the average torque per core volume. Finally, the initial design and optimized design are compared.

Simulação computacional de materiais bidimensionais: funcionalização de defeitos extensos no grafeno e retenção de contaminantes por argilominerais

In this work are considered two bidimensional systems, with distints chacacteristcs and applicabilitys. Is studied the adsorption of transition metals (MT) Fe, Co, Mn and Ru in extended defects, formed by graphene grain boundaries. First in pristine graphene The hollow site of carbon hexagon, in pristine graphene, are the most stable for MT adsorption. The Dirac cone in eletronic structure of graphene was manteined with the presence of MT. For the considered grain boundaries the MT has a greater stability for absorption in the grain boundaries sites in comparison with pristine graphene. Through the energy barrier values, are observed diffusion chanels for MT localized on the grain boundaries. This diffusion chanels indicate a possible formation of nanolines of MT in graphene. For the first stage of the nanolines, ate observed a better stability for the system with greater MT concentration, due to MT-MT interactions. Also, due to the magnetic moment of the MT, the nanolines show a magnetization. For the most stable configurations the system are metallics, particularly for Fe the band structure indicates an anisotropic spin current. In a second study, are considereted the retention capacity for metallic contaminants Cd and Hg in clayminerals, kaolinite (KAO) and montmorillonite (MMT). Through the adsorption energies of contaminantes in the clayminerals, was observed a increase in stability with the increase of contaminants concentration, due to the interaction Cd-Cd and Hg-Hg. Also, was observed that KAO has a strong interaction beteween monolayers than MMT. In this sence, for the adsoption process of contaminantes in the natural form of KAO and MMT, the latter has a better retention capacity, due to the small net work for contaminant intercalation. However, when the modification of clayminerals, with molecules that increase the spacing between monolayers, exist a optimal condition, which the contaminant absorption are more stable in KAO system than in MMT. In the Langmuir adsorption model for the clayminerals in the optimal monolayer spacing, the retention capacity for Cd and Hg in KAO system are 21% greater than in MMT system. Also, for the X-ray Absorption Near Edge Spectroscopy (XANES) for the K edge of Cd and Hg, are found a positive shift of absorption edge with the decreasing of monolayer spacing. This result indicates a possible way to determine the concentration of adsorbed contaminats in relation to unabsorbed ones, from the decomposition of experimental XANES in the obteined spectras.

Ajustes de coeficientes integrantes de processos físicos e bioquímicos na autedepuração em curso de água de médio porte

The mathematical modeling in the simulation of self-purification capacity in lotic environment is an important tool in the planning and management of hydric resources in hydrographic basin scale. It satisfactorily deals with the self-purification process when the coefficients of physical and biochemical processes are calibrated from monitorated water quality data, which was the main focus of this study. The present study was conducted to simulate the behavior of the parameters OD, BOD5, total phosphorus, E. coli, ammonia, nitrite, nitrate and the total metals cadmium, chromium, copper, lead and zinc in the Uberabinha’s lower course (with an approximate annual growth flow between 4-35 m3/s), in a stretch of 19 km downstream of the treated effluent release by the WWTP of the city. The modelings, on the present study, show the importance of constant water quality parameters monitoration over the water course, based on the comparison of the simulations from calibrated coefficients and coefficients obtained in the literature for the period of June until November 2015. After coefficients calibration, there were good adjustments between simulated and measured data for the parameters OD, BOD, Ptotal, ammonia and nitrate and unsatisfactory adjust for the parameters nitrite and E. coli. About the total metals, the adjustments were not satisfactory on the reservoir’s vicinity of the Small Hydropower Plant Martins, due the considerable increase of the bottom sediment in lentic region. The greatest scientific contribution of this study was to calibrate the decay coefficient K and the quantification of the release by the fund S of total metals in watercourse midsize WWTP pollutant load receptor, justified by the lack of studies in the literature about the subject. For the metals cadmium, chromium, copper, lead and zinc, the borderline for K and S calibrated were: 0.0 to 13.0 day-1 and 0.0 to 1.7 g/m3.day; 0.0 to 0.9 day-1 and 0.0 to 7.3 g/m3.day; 0.0 to 25.0 day-1 and 0.0 to 1.8 g/m3.day; 0.0 to 7.0 day-1 and 0.0 to 40.3 g/m3.day; 0.0 to 30.0 day-1 and 0.0 to 70.1 g/m3.day.

Análises clínicas compostas: um estudo crítico via simulação

Análises clínicas compostas podem ser aplicadas com o objetivo de economizar recursos quando se pretende classificar uma população (identificar todos os indivíduos infetados) na qual a taxa de prevalência é diminuta, apesar de reduzir a fiabilidade da classificação. Neste sentido, o presente trabalho tem como objetivo comparar o desempenho de várias metodologias de classificação (ensaios individuais, metodologia de Dorfman, algoritmos hierárquicos e testes baseados em arrays com e sem master pool), nomeadamente o custo relativo (número esperado de testes para a classificação de cada indivíduo) e a probabilidade de existência de erros de classificação (medida pela especificidade e pela sensibilidade de cada metodologia). Assim, as usuais técnicas de simulação (realizadas recorrendo ao software estatístico R) foram aplicadas a populações com distintos cenários, usando diferentes taxas de prevalência, várias dimensões do grupo, bem como diversos níveis de sensibilidade e de especificidade. Ao longo deste trabalho foi assumido que o agrupamento dos sangues (criação do sangue composto) não afeta a probabilidade de má classificação (ausência do efeito de diluição), como é comprovado por muitas análises qualitativas (presença ou ausência da infeção). As simulações realizadas mostram que os testes compostos só podem ser recomendados em casos com baixas taxas de prevalência e baixas probabilidades de erros de classificação, sendo possível identificar a metodologia mais adequada para cada caso em função da sua taxa de prevalência, sensibilidade e especificidade. Além disso, sempre que a taxa de prevalência, a sensibilidade e a especificidade são conhecidos (ou, pelo menos, estimativas razoáveis estão disponíveis), simulações podem ser realizadas para identificar a metodologia mais adequada, e, deste modo, encontrar um ponto de equilíbrio entre o custo e a fiabilidade da classificação.

Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico

LINS, Filipe C. A. et al. Modelagem dinâmica e simulação computacional de poços de petróleo verticais e direcionais com elevação por bombeio mecânico. In: CONGRESSO BRASILEIRO DE PESQUISA E DESENVOLVIMENTO EM PETRÓLEO E GÁS, 5. 2009, Fortaleza, CE. Anais... Fortaleza: CBPDPetro, 2009.

Deteção da simulação em indivíduos com e sem diagnóstico de depressão

A simulação consiste na produção voluntária de sintomas físicos e psicológicos para obter compensações externas. O presente estudo tem como objetivo avaliar a eficácia de um conjunto de instrumentos utilizados na identificação de situações de simulação, bem como averiguar se esses instrumentos são sensíveis a sintomas psicopatológicos. Deste modo, espera-se que os resultados obtidos pelos grupos com depressão e sem depressão honestos difiram significativamente dos resultados obtidos pelo grupo sem depressão simulador. Para tal, foi recolhida uma amostra de 59 sujeitos, todos do sexo feminino, divididos por três grupos: com diagnóstico de depressão (n=19), sem diagnóstico de depressão simuladores (n=20) e sem diagnóstico de depressão honestos (n=20). O protocolo de avaliação incluiu o Test of Memory Malingering (TOMM: Tombaugh, 1996), o Structured Inventory Malingered Symptomatology (SIMS: Widows & Smith), os subtestes de Memória de Dígitos e dos Cubos da WAIS-III, (Wechsler, 1997) e a Figura Complexa de Rey (FCR: Rey, 1988). Os resultados não sugerem diferenças significativas no primeiro e segundo ensaios de aprendizagem do TOMM entre os grupos em estudo. No ensaio de retenção, o grupo sem diagnóstico de depressão simulador difere significativamente do grupo sem diagnóstico de depressão honesto. No SIMS, apenas a subescala Psicose (P) difere significativamente entre os grupos com diagnóstico de depressão e sem diagnóstico de depressão simulador. As subescalas Défices Neurológicos (NI), Perturbações Afetivas (AF), P e Perturbações Mnésicas (AM), com exceção da escala Capacidade Intelectual Reduzida (LI) diferem significativamente entre os grupos com diagnóstico de depressão e sem diagnóstico de depressão honesto e entre este e o grupo sem diagnóstico de depressão simulador. No subteste de Memória de Dígitos verifica-se diferenças significativas entre os grupos sem diagnóstico de depressão simulador e honesto. No subteste dos Cubos não foram encontradas diferenças significativas entre os grupos estudados e na cópia da FCR foram encontradas diferenças significativas entre os grupos com diagnóstico de depressão e sem diagnóstico de depressão simulador. Este estudo contribui para o enriquecimento da literatura nacional e internacional, uma vez que inclui um grupo clínico e alguns instrumentos que não são habitualmente utilizados numa avaliação de simulação. Para além disso, estes resultados têm implicações no contexto clínico e forense, no sentido preventivo e de conhecimento da doença mental.

Simulação de sistemas solares passivos usando materiais de mudança de fase (PCMs)

O gradual consumo de energia primária a nível mundial deu origem a uma crise não só ambiental como também económica, proveniente das limitações das reservas energéticas e do fornecimento. Estas inquietações têm levado a um estudo cada vez mais aprofundado no que concerne à eficiência energética de edifícios. É neste contexto que surge o estudo da aplicação dos materiais de mudança de fase (PCM) na térmica dos edifícios. O presente trabalho consiste no estudo da influência da introdução de materiais de mudança de fase no comportamento térmico de um edifício. Foi analisada uma simulação numérica para um sistema solar passivo de ganho direto, por um programa de simulação designado EXTEND™. Efetuou-se, também, o estudo paramétrico de determinadas propriedades associadas aos materiais de mudança de fase. Após a análise, foi testado o impacto, em termos de conforto, da utilização de materiais de mudança de fase em sistemas solares passivos de ganho direto.