Identifying factors that promote consumer behaviours causing expired domestic food waste

Many commentators argue that domestic food waste is strongly influenced by consumer behaviours. This article reports on a study using mixed-methods to identify key factors responsible for promoting consumer behaviours that lead to domestic food waste through the lens of the Value-Belief-Norm (VBN) theory. Based on the study’s findings, three factors are proposed that cause behaviours that lead to food waste: supply knowledge – does a consumer know what food they have available; location knowledge – does a consumer know where to locate food items, and; food literacy – to what degree do past experience and acquired knowledge impact on a consumer’s food consumption and wastage practices. We analyse the study’s findings in light of a review of literature about consumer food wastage behaviours and in turn, present new insights into consumer behaviour, food waste, and the use of technology to reduce food waste.

Reflections on tomorrow’s menu : evidence for inpatient meal preferences at a large tertiary public hospital

There are limited studies that describe patient meal preferences in hospital; however this data is critical to develop menus that address satisfaction and nutrition whilst balancing resources. This quality study aimed to determine preferences for meals and snacks to inform a comprehensive menu revision in a large (929 bed) tertiary public hospital. The method was based on Vivanti et al. (2008) with data collected by two final year dietetic students. The first survey comprised 72 questions, achieved a response rate of 68% (n = 192), with the second more focused at 47 questions achieving a higher response rate of 93% (n = 212). Findings showed over half the patients reporting poor or less than normal appetite, 20% describing taste issues, over a third with a LOS >7 days, a third with a MST _ 2 and less than half eating only from the general menu. Soup then toast was most frequently reported as eaten at home when unwell, and whilst most reported not missing any foods when in hospital (25%), steak was most commonly missed. Hot breakfasts were desired by the majority (63%), with over half preferring toast (even if cold). In relation to snacks, nearly half (48%) wanted something more substantial than tea/coffee/biscuits, with sandwiches (54%) and soup (33%) being suggested. Sandwiches at the evening meal were not popular (6%). Difficulties with using cutlery and meal size selection were identified as issues. Findings from this study had high utility and supported a collaborative and evidenced based approach to a successful major menu change for the hospital.

Let them eat steak : food preferences of patients in a tertiary public hospital

Information on foods patients like and dislike is the essential basis for planning menus which are acceptable to patients and promote adequate consumption. The aim of this study was to obtain quantitative data on the food preferences of inpatients at a large metropolitan public hospital for use in menu planning. Methodology was based on a study by Williams et al (1988), and included additional questions about appetite and taste changes. The survey used a 9 point hedonic scale to rate foods listed in random order and was modified to incorporate more contemporary foods than those used in the originalWilliams study. Surveys were conducted by final year University of Queensland dietetics students on Food Service Practicum at the Royal Brisbane and Women’s Hospital (929 beds) in 2012. The first survey (220 questions, n = 157) had a response rate of 61%. The second included more sandwich fillings and salads (231 questions, n = 219, response rate 67%). Total number surveyed was 376. Results showed the most preferred foods were roast potato, grilled steak, ice cream, fresh strawberries, roast lamb, roast beef, grapes and banana. The least preferred foods were grapefruit, soybeans, lentils, sardines, prune juice and grapefruit juice. Patients who reported taste changes (10%) had similar food preferences to those who didn’t report taste changes. Patients who reported poor/very poor appetite (10%) generally scored foods lower than those who reported OK (22%), good/very good appetite (65%). The results of this study informed planning for a new patient menu at the RBWH in December 2012.

A Triple Bottom Line Planning Tool for Measuring Sustainability : A Systems Approach to Sustainability Using the Australian Dairy Industry as a Case Study

Sustainability is a key driver for decisions in the management and future development of organisations and industries. However, quantifying and comparing sustainability across the triple bottom line (TBL) of economy, environment and social impact, has been problematic. There is a need for a tool which can measure the complex interactions within and between the environmental, economic and social systems which affect the sustainability of an industry in a transparent, consistent and comparable way. The authors acknowledge that there are currently numerous ways in which sustainability is measured and multiple methodologies in how these measurement tools were designed. The purpose of this book is to showcase how Bayesian network modelling can be used to identify and measure environmental, economic and social sustainability variables and to understand their impact on and interaction with each other. This book introduces the Sustainability Scorecard, and describes it through a case study on sustainability of the Australian dairy industry. This study was conducted in collaboration with the Australian dairy industry.

UbiOpticon : participatory sousveillance with urban screens and mobile phone cameras

In many cities around the world, surveillance by a pervasive net of CCTV cameras is a common phenomenon in an attempt to uphold safety and security across the urban environment. Video footage is being recorded and stored, sometimes live feeds are being watched in control rooms hidden from public access and view. In this study, we were inspired by Steve Mann’s original work on sousveillance (surveillance from below) to examine how a network of camera equipped urban screens could allow the residents of Oulu in Finland to collaborate on the safekeeping of their city. An agile, rapid prototyping process led to the design, implementation and ‘in the wild’ deployment of the UbiOpticon screen application. Live video streams captured by web cams integrated at the top of 12 distributed urban screens were broadcast and displayed in a matrix arrangement on all screens. The matrix also included live video streams of two roaming mobile phone cameras. In our field study we explored the reactions of passers-by and users of this screen application that seeks to inverse Bentham’s original panopticon by allowing the watched to be watchers at the same time. In addition to the original goal of participatory sousveillance, the system’s live video feature sparked fun and novel user-led apprlopriations.

Vote with your feet : local community polling on urban screens

Falling prices have led to an ongoing spread of public displays in urban areas. Still, they mostly show passive content such as commercials and digital signage. At the same time, technological advances have enabled the creation of interactive displays potentially increasing their attractiveness for the audience, e.g. through providing a platform for civic discourse. This poses considerable challenges, since displays need to communicate the opportunity to engage, motivate the audience to do so, and be easy to use. In this paper we present Vote With Your Feet, a hyperlocal public polling tool for urban screens allowing users to express their opinions. Similar to vox populi interviews on TV or polls on news websites, the tool is meant to reflect the mindset of the community on topics such as current affairs, cultural identity and local matters. It is novel in that it focuses on a situated civic discourse and provides a tangible user interface, tackling the mentioned challenges. It shows one Yes/No question at a time and enables users to vote by stepping on one of two tangible buttons on the ground. This user interface was introduced to attract people’s attention and to lower participation barriers. Our field study showed that Vote With Your Feet is perceived as inviting and that it can spark discussions among co-located people.

Enhancing student learning in the workplace through developing the leadership capabilities of clinical supervisors in the nursing discipline

The purpose of this project was to build the leadership capacity of clinical supervisors in the nursing discipline by developing, implementing and systematically embedding a leadership model into the structure and practice of student supervision. The University worked in partnership with three major metropolitan hospitals in Queensland to develop a framework and professional development program incorporating leadership and clinical supervision. The Leadership and Clinical Education (LaCE) program consisted of two structured workshops complemented by individual personal development projects undertaken by participants. Participants were supported in these activities with a purpose-built website that provides access to a wide variety of information and other learning resources. Quantitative and qualitative evaluations indicated that the approach was highly valued by participants, as it promoted useful peer dialogue, sharing of experiences and personal development in relation to assisting leadership development and student learning in the workplace. The LaCE program provides an ideal springboard for introducing the development of welltrained leaders into the clinical workplace. The resources developed have the potential to provide ongoing support for clinical supervisors to improve the learning of undergraduate nursing student. The challenge will be to achieve continued innovation within clinical education through sustainable leadership programs.

Racial differences in physical activity among breast cancer survivors : implications for breast cancer care

Background: Physical activity after breast cancer diagnosis is associated with improved survival. This study examines levels of and changes in physical activity following breast cancer diagnosis, overall and by race. Methods: The Carolina Breast Cancer Study, Phase III, assessed pre- and post-diagnosis physical activity levels in a cohort of 1,735 women, aged 20-74, diagnosed with invasive breast cancer between 2008 and 2011 in 44 counties of North Carolina. Logistic regression and analysis of variance were used to examine whether demographic, behavioral and clinical characteristics were associated with activity levels. Results: Only 35% of breast cancer survivors met current physical activity guidelines post-diagnosis. A decrease in activity following diagnosis was reported by 59% of patients, with the average study participant reducing their activity by 230 minutes (95% CI: 190, 270). Following adjustment for potential confounders, when compared to white women, African-American women were less likely to meet national physical activity guidelines post-diagnosis (odds ratio: 1.38, 95% CI: 1.01, 1.88), reported less weekly post-diagnosis physical activity (182 vs. 215 minutes; p=0.13), and reported higher average reductions in pre- versus post-diagnosis weekly activity (262 vs. 230 minutes; p-value = 0.13). Conclusion: Despite compelling evidence demonstrating the benefits of physical activity post-breast cancer, it is clear that more work needs to be done to promote physical activity in breast cancer patients, especially among African-American women.

A prospective model of care for breast cancer rehabilitation : bone health and arthralgias

Musculoskeletal health can be compromised by breast cancer treatment. In particular, bone loss and arthralgias are prevalent side effects experienced by women treated with chemotherapy and/or adjuvant endocrine therapy. Bone loss leads to osteoporosis and related fractures, while arthralgias threaten quality of life and compliance to treatment. Because the processes that lead to these musculoskeletal problems are initiated when treatment begins, early identification of women who may be at higher risk of developing problems, routine monitoring of bone density and pain at certain stages of treatment, and prudent application of therapeutic interventions are key to preventing and/or minimizing musculoskeletal sequelae. Exercise may be a particularly suitable intervention strategy because of its potential to address a number of impairments; it may slow bone loss, appears to reduce joint pain in noncancer conditions, and improves other breast cancer outcomes. Research efforts continue in the areas of etiology, measurement, and treatment of bone loss and arthralgias. The purpose of this review is to provide an overview of the current knowledge on the management and treatment of bone loss and arthralgias in breast cancer survivors and to present a framework for rehabilitation care to preserve musculoskeletal health in women treated for breast cancer.

Using communicative ecology theory to scope the emerging role of social media in the evolution of urban food systems

Urban agriculture plays an increasingly vital role in supplying food to urban populations. Changes in Information and Communications Technology (ICT) are already driving widespread change in diverse food-related industries such as retail, hospitality and marketing. It is reasonable to suspect that the fields of ubiquitous technology, urban informatics and social media equally have a lot to offer the evolution of core urban food systems. We use communicative ecology theory to describe emerging innovations in urban food systems according to their technical, discursive and social components. We conclude that social media in particular accentuate fundamental social interconnections normally effaced by conventional industrialised approaches to food production and consumption.

Dispositional resistance to change : measurement equivalence and the link to personal values across 17 nations

The concept of dispositional resistance to change has been introduced in a series of exploratory and confirmatory analyses through which the validity of the Resistance to Change (RTC) Scale has been established (S. Oreg, 2003). However, the vast majority of participants with whom the scale was validated were from the United States. The purpose of the present work was to examine the meaningfulness of the construct and the validity of the scale across nations. Measurement equivalence analyses of data from 17 countries, representing 13 languages and 4 continents, confirmed the cross-national validity of the scale. Equivalent patterns of relationships between personal values and RTC across samples extend the nomological net of the construct and provide further evidence that dispositional resistance to change holds equivalent meanings across nations.

Regulation of ROCK1 via Notch1 during breast cancer cell migration into dense matrices

Background The behaviour of tumour cells depends on factors such as genetics and the tumour microenvironment. The latter plays a crucial role in normal mammary gland development and also in breast cancer initiation and progression. Breast cancer tissues tend to be highly desmoplastic and dense matrix as a pre-existing condition poses one of the highest risk factors for cancer development. However, matrix influence on tumour cell gene expression and behaviour such as cell migration is not fully elucidated. Results We generated high-density (HD) matrices that mimicked tumour collagen content of 20 mg/cm3 that were ~14-fold stiffer than low-density (LD) matrix of 1 mg/cm3. Live-cell imaging showed breast cancer cells utilizing cytoplasmic streaming and cell body contractility for migration within HD matrix. Cell migration was blocked in the presence of both the ROCK inhibitor, Y-27632, and the MMP inhibitor, GM6001, but not by the drugs individually. This suggests roles for ROCK1 and MMP in cell migration are complicated by compensatory mechanisms. ROCK1 expression and protein activity, were significantly upregulated in HD matrix but these were blocked by treatment with a histone deacetylase (HDAC) inhibitor, MS-275. In HD matrix, the inhibition of ROCK1 by MS-275 was indirect and relied upon protein synthesis and Notch1. Inhibition of Notch1 using pooled siRNA or DAPT abrogated the inhibition of ROCK1 by MS-275. Conclusion Increased matrix density elevates ROCK1 activity, which aids in cell migration via cell contractility. The upregulation of ROCK1 is epigenetically regulated in an indirect manner involving the repression of Notch1. This is demonstrated from inhibition of HDACs by MS-275, which caused an upregulation of Notch1 levels leading to blockade of ROCK1 expression.

Measurement equivalence of the dispositional resistance to change scale

Intended to bridge the gap between the latest methodological developments and cross-cultural research, this interdisciplinary resource presents the latest strategies for analyzing cross-cultural data. Techniques are demonstrated through the use of applications that employ cross national data sets such as the latest European Social Survey. With an emphasis on the generalized latent variable approach, internationally?prominent researchers from a variety of fields explain how the methods work, how to apply them, and how they relate to other methods presented in the book. Syntax and graphical and verbal explanations of the techniques are included. [from publisher's website]

Phosphorus-based functional groups as hydrogen bonding templates for rotaxane formation

We report on the use of the hydrogen bond acceptor properties of some phosphorus-containing functional groups for the assembly of a series of [2]rotaxanes. Phosphinamides, and the homologous thio– and selenophosphinamides, act as hydrogen bond acceptors that, in conjunction with an appropriately positioned amide group on the thread, direct the assembly of amide-based macrocycles around the axle to form rotaxanes in up to 60% yields. Employing solely phosphorus-based functional groups as the hydrogen bond accepting groups on the thread, a bis(phosphinamide) template and a phosphine oxide-phosphinamide template afforded the corresponding rotaxanes in 18 and 15 % yields, respectively. X-Ray crystallography of the rotaxanes shows the presence of up to four intercomponent hydrogen bonds between the amide groups of the macrocycle and various hydrogen bond accepting groups on the thread, including rare examples of amide-to-phosphonamide, -thiophosphinamide and -selenophosphinamide groups. With a phosphine oxide-phosphinamide thread, the solid state structure of the rotaxane is remarkable, featuring no direct intercomponent hydrogen bonds but rather a hydrogen bond network involving water molecules that bridge the H-bonding groups of the macrocycle and thread through bifurcated hydrogen bonds. The incorporation of phosphorus-based functional groups into rotaxanes may prove useful for the development of molecular shuttles in which the macrocycle can be used to hinder or expose binding ligating sites for metal-based catalysts.

Ambiguity Acceptance Testing : A Comparison of the Ratio Test and Difference Test

Integer ambiguity resolution is an indispensable procedure for all high precision GNSS applications. The correctness of the estimated integer ambiguities is the key to achieving highly reliable positioning, but the solution cannot be validated with classical hypothesis testing methods. The integer aperture estimation theory unifies all existing ambiguity validation tests and provides a new prospective to review existing methods, which enables us to have a better understanding on the ambiguity validation problem. This contribution analyses two simple but efficient ambiguity validation test methods, ratio test and difference test, from three aspects: acceptance region, probability basis and numerical results. The major contribution of this paper can be summarized as: (1) The ratio test acceptance region is overlap of ellipsoids while the difference test acceptance region is overlap of half-spaces. (2) The probability basis of these two popular tests is firstly analyzed. The difference test is an approximation to optimal integer aperture, while the ratio test follows an exponential relationship in probability. (3) The limitations of the two tests are firstly identified. The two tests may under-evaluate the failure risk if the model is not strong enough or the float ambiguities fall in particular region. (4) Extensive numerical results are used to compare the performance of these two tests. The simulation results show the ratio test outperforms the difference test in some models while difference test performs better in other models. Particularly in the medium baseline kinematic model, the difference tests outperforms the ratio test, the superiority is independent on frequency number, observation noise, satellite geometry, while it depends on success rate and failure rate tolerance. Smaller failure rate leads to larger performance discrepancy.