Bimodal distribution of motility and cell fate in Dictyostelium discoideum

Pre-starvation amoebae of Dictyostelium discoideum exhibit random movements. Starved cells aggregate by directed movements (chemotaxis) towards cyclic AMP and differentiate into live spores or dead stalk cells. Many differences between presumptive spore and stalk cells precede differentiation. We have examined whether cell motility-related factors are also among them. Cell speeds and localisation of motility-related signalling molecules were monitored by live cell imaging and immunostaining (a) in nutrient medium during growth, (b) immediately following transfer to starvation medium and (c) in nutrient medium that was re-introduced after a brief period of starvation. Cells moved randomly under all three conditions but mean speeds increased following transfer from nutrient medium to starvation medium; the transition occurred within 15 min. The distribution of speeds in starvation medium was bimodal: about 20% of the cells moved significantly faster than the remaining 80%. The motility-related molecules F-actin, PTEN and PI3 kinase were distributed differently in slow and fast cells. Among starved cells, the calcium content of slower cells was lower than that of the faster cells. All differences reverted within 15 min after restoration of the nutrient medium. The slow/fast distinction was missing in Polysphondylium pallidum, a cellular slime mould that lacks the presumptive stalk and spore cell classes, and in the trishanku (triA(center dot)) mutant of D. discoideum, in which the classes exist but are unstable. The transition from growth to starvation triggers a spontaneous and reversible switch in the distribution of D. discoideum cell speeds. Cells whose calcium content is relatively low (known to be presumptive spore cells) move slower than those whose calcium levels are higher (known to be presumptive stalk cells). Slow and fast cells show different distributions of motility-related proteins. The switch is indicative of a bistable mechanism underlying cell motility.

Equal channel angular pressing processing routes and associated structure modification: a differential scanning calorimetry and X-ray line profile analysis

The effectiveness of different routes of equal channel angular pressing (A, B-c, and C) is studied for commercially pure copper. The stored energy and the activation energy of recrystallization for the deformed samples were quantified using differential scanning calorimetry and X-ray diffraction line profile analysis. Results of the study revealed that the dislocation density and the stored energy are higher in the case of route B-c deformed sample. The activation energy for recrystallization is lower for route B-c. (C) 2012 International Centre for Diffraction Data doi:10.1017/S0885715612000310]

Effect of Texture and Grain Size on Bio-Corrosion Response of Ultrafine-Grained Titanium

The bio-corrosion response of ultrafine-grained commercially pure titanium processed by different routes of equal-channel angular pressing has been studied in simulated body fluid. The results indicate that the samples processed through route B-c that involved rotation of the workpiece by 90 deg in the same sense between each pass exhibited higher corrosion resistance compared to the ones processed by other routes of equal-channel angular pressing, as well as the coarse-grained sample. For a similar grain size, the higher corrosion resistance of the samples exhibiting off-basal texture compared to shear texture indicates the major role of texture in corrosion behavior. It is postulated that an optimum combination of microstructure and crystallographic texture can lead to high strength and excellent corrosion resistance.

Infection of Human Endothelial Cells by Japanese Encephalitis Virus: Increased Expression and Release of Soluble HLA-E

Japanese encephalitis virus (JEV) is a single stranded RNA virus that infects the central nervous system leading to acute encephalitis in children. Alterations in brain endothelial cells have been shown to precede the entry of this flavivirus into the brain, but infection of endothelial cells by JEV and their consequences are still unclear. Productive JEV infection was established in human endothelial cells leading to IFN-beta and TNF-alpha production. The MHC genes for HLA-A, -B, -C and HLA-E antigens were upregulated in human brain microvascular endothelial cells, the endothelial-like cell line, ECV 304 and human foreskin fibroblasts upon JEV infection. We also report the release/shedding of soluble HLA-E (sHLA-E) from JEV infected human endothelial cells for the first time. This shedding of sHLA-E was blocked by an inhibitor of matrix metalloproteinases (MMP). In addition, MMP-9, a known mediator of HLA solubilisation was upregulated by JEV. In contrast, human fibroblasts showed only upregulation of cell-surface HLA-E. Addition of UV inactivated JEV-infected cell culture supernatants stimulated shedding of sHLA-E from uninfected ECV cells indicating a role for soluble factors/cytokines in the shedding process. Antibody mediated neutralization of TNF-alpha as well as IFNAR receptor together not only resulted in inhibition of sHLA-E shedding from uninfected cells, it also inhibited HLA-E and MMP-9 gene expression in JEV-infected cells. Shedding of sHLA-E was also observed with purified TNF-alpha and IFN-beta as well as the dsRNA analog, poly (I:C). Both IFN-beta and TNF-alpha further potentiated the shedding when added together. The role of soluble MHC antigens in JEV infection is hitherto unknown and therefore needs further investigation.

Topological analysis of electron density and the electrostatic properties of isoniazid: an experimental and theoretical study

Isoniazid (isonicotinohydrazide) is an important first-line antitubercular drug that targets the InhA enzyme which synthesizes the critical component of the mycobacterial cell wall. An experimental charge-density analysis of isoniazid has been performed to understand its structural and electronic properties in the solid state. A high-resolution single-crystal X-ray intensity data has been collected at 90 K. An aspherical multipole refinement was carried out to explore the topological and electrostatic properties of the isoniazid molecule. The experimental results were compared with the theoretical charge-density calculations performed using CRYSTAL09 with the B3LYP/6-31G** method. A topological analysis of the electron density reveals that the Laplacian of electron density of the N-N bond is significantly less negative, which indicates that the charges at the b.c.p. (bond-critical point) of the bond are least accumulated, and so the bond is considered to be weak. As expected, a strong negative electrostatic potential region is present in the vicinity of the O1, N1 and N3 atoms, which are the reactive locations of the molecule. The C-H center dot center dot center dot N, C-H center dot center dot center dot O and N-H center dot center dot center dot N types of intermolecular hydrogen-bonding interactions stabilize the crystal structure. The topological analysis of the electron density on hydrogen bonding shows the strength of intermolecular interactions.

Spatial variation of seismicity parameters across India and adjoining areas

An attempt has been made to quantify the variability in the seismic activity rate across the whole of India and adjoining areas (0–45°N and 60–105°E) using earthquake database compiled from various sources. Both historical and instrumental data were compiled and the complete catalog of Indian earthquakes till 2010 has been prepared. Region-specific earthquake magnitude scaling relations correlating different magnitude scales were achieved to develop a homogenous earthquake catalog for the region in unified moment magnitude scale. The dependent events (75.3%) in the raw catalog have been removed and the effect of aftershocks on the variation of b value has been quantified. The study area was divided into 2,025 grid points (1°91°) and the spatial variation of the seismicity across the region have been analyzed considering all the events within 300 km radius from each grid point. A significant decrease in seismic b value was seen when declustered catalog was used which illustrates that a larger proportion of dependent events in the earthquake catalog are related to lower magnitude events. A list of 203,448 earth- quakes (including aftershocks and foreshocks) occurred in the region covering the period from 250 B.C. to 2010 A.D. with all available details is uploaded in the website http://www.civil.iisc.ernet.in/*sreevals/resource.htm.

Development of SnS quantum dot solar cells by SILAR method

SnS quantum dot solar cell is fabricated by Successive Ionic Layer Adsorption and Reaction (SILAR) method. SnS layer is optimized by different SILAR cycles of deposition. The particle size increased with the increase in number of SILAR cycles. Cu2S coated FTO is used as counter electrode against the conventional Platinum electrode. On comparison with a cell having a counter electrodeelectrolyte combination of Platinum-Iodine, Cu2S-polysulfide combination is found to improve both the short circuit current and fill factor of the solar cell. A maximum efficiency of 0.54% is obtained with an open circuit voltage of 311 mV and short circuit current density of 4.86 mA/cm. (C) 2014 Elsevier Ltd. All rights reserved.

High Proton Mobility, Solvent Induced Single Crystal to Single Crystal Structural Transformation, and Related Studies on a Family of Compounds Formed from Mn-3 Oxo-Clusters

The reaction between 4,4'-sulfonyldibenzoic acid (H(2)SDBA) and manganese under mild conditions resulted in the isolation of two new three-dimensional compounds, Mn-4(C14H8O6S)(4)(DMA)(2)]center dot 3DMA, I, and Mn-3(C14H8O6S)(3)(DMA)(2)(MeOH)]center dot DMA, IIa. Both structures have Mn-3 trimer oxo cluster units. While the Mn-3 oxoclusters are connected through octahedral manganese forming one-dimensional Mn-O-Mn chains in I, the Mn-3 units are isolated in IIa. The SDBA units connect the Mn-O-Mn chains and the Mn-3 clusters giving rise to the three-dimensional structure. Both compounds have coordinated and free solvent molecules. In IIa, two different solvent molecules are coordinated, of which one solvent can be reversibly exchanged by a variety of other similar solvents via a solvent-mediated single crystal to single crystal (SCSC) transformation. The free lattice DMA solvent molecules in I can be exchanged by water molecules resulting in hydrophilic channels. Proton conductivity studies on I reveals a high proton mobility with conductivity values of similar to 0.87 x 10(-3) Omega(-1) cm(-1) at 34 degrees C and 98% RH, which is comparable to some of the good proton conductivity values observed in inorganic coordination polymers. We have also shown structural transformation of I to IIa through a possible dissolution and recrystallization pathway. In addition, both I and IIa appear to transform to two other manganese compounds H3O]Mn-3(mu(3)-OH)(C14H8O6S)(3)(H2O)](DMF)(5) and H3O](2)Mn-7(mu 3-OH)(4)(C14H8O6S)(6)(H2O)(4)](H2O)(2)(DMF)(8) under suitable reaction conditions. We have partially substituted Co in place of Mn in the Mn-3 trimer clusters forming CoMn2(C14H8O6S)(3)(DMA)(2)(EtOH)]center dot DMA, III, a structure that is closely related to IIa. All the compounds reveal antiferromagnetic behavior. On heating, the cobalt substituted phase (compound III) forms a CoMn2O4 spinel phase with particle sizes in the nanometer range.

Thermal Response on the Microstructure and Texture of ECAP and Cold-Rolled Pure Magnesium

This paper deals with dynamic recrystallization (DRX), static recrystallization, and grain growth phenomena of pure magnesium after equal channel angular pressing (ECAP) by route A and B-C at 523 K (250 A degrees C) followed by 80 pct cold rolling. The ECAP-deformed and the subsequently rolled samples were annealed at 373 K and 773 K (100 A degrees C and 500 A degrees C). The associated changes in the microstructure and texture were studied using electron back-scattered diffraction. ECAP produced an average grain size of 12 to 18 A mu m with B and C-2 fiber textures. Subsequent rolling led to an average grain size 8 to 10 A mu m with basal texture fiber parallel to ND. There was no noticeable increase in the average grain size on annealing at 373 K (100 A degrees C). However, significant increase in the average grain size occurred at 773 K (500 A degrees C). The occurrence of different DRX mechanisms was detected: discontinuous dynamic recrystallization was attributed to basal slip activity and continuous dynamic recovery and recrystallization to prismatic/pyramidal slip systems. Only continuous static recrystallization could be observed on annealing.

Interpenetrated and Catenated Zinc Thiosulfates Frameworks with dia and qtz Nets: Synthesis, Structure, and Properties

Reactions between Zn(NO3)(2)center dot 6H(2)O, Na2S2O3, 4,4'-bipyridine (bpy), 1,2-bis(4-pyridyl)ethene (bpe), 1,2-bis (4-pyridyl) ethane (bpa), and 1,3-bis(4-pyridyl)propane (bpp) under solvothermal conditions resulted in four new zinc thiosulfate hybrid compounds. Compound I has four-membered zinc thiosulfate rings connected by the ligand, 1,3-bis(4-pyridyl)propane (bpp) forming a two-dimensional structure. Compounds II-IV have one-dimensional zinc thiosulfate chains connected by the ligands, bpy (II), bpe (III), and bpa (IV) giving rise to three-dimensional structures. All the four-structures exhibit 3-fold interpenetration. Proton conductivity studies indicate reasonable proton mobility at 34 degrees C and at 98% relative humidity. The compounds also exhibit Lewis acid character and good photocatalytic activity for the decomposition of cationic dyes.

重庆西山坪西园建材厂滑坡应急抢险治理工程

以西山坪西园建材厂滑坡体工程地质勘察资料为依据，分析了滑坡体的岩土组成和物理力学性质以及造成滑坡的原因。认为影响山体滑坡的因素除与边坡地层岩性。微地貌特征。气象及水文条件有关外，修建厂房开挖与切割边坡坡脚则是重要的诱发原因。定性得出该滑坡的形成机制和类型为牵引式、浅层、小型土质新型滑坡。在此基础上，应用规范所推荐的极限平衡法，对该滑坡体的3个主要地质剖面(A-A'、B-B、C-C)进行了稳定性计算与分析，得到不同工况下滑坡体稳定系数值。其中，在最不利组合工况（自重十暴雨十地震）下，滑坡体稳定系数仅为0.99-1.03，处于不稳定状态）根据计算结果，按照《长江三峡库区滑坡灾害防治规范》要求及“技术可行、安全可靠、经济合理、简单易实施”的设计原则，对该滑坡的应急抢险方案进行了设计，提出以抗滑桩拦挡工程为主、坡顶修筑截排水沟。地表裂缝回填夯实等综合治理方案。抗滑桩设置1排，分3段，根据每段不同的剩余下滑力设计抗滑桩的断面尺寸和埋设深度，使该滑坡体治理后，其安全系数分别满足不同工况下的规范要求。该方案已通过了三峡库区滑坡灾害防治专家组的审核，目前，正处于实施阶段。

Deformation twinning and its effect on crack extension

Deformation twinning near a crack tip is observed in b.c.c. metal Mo based on molecular dynamics simulation at temperature T = 50 K and loading rate (K) over dot(II) = 0.0706 MPa m(1/2)/ps. The defor mation twinning is closely controlled by both the crystal geometry orientation and the stress distribution. The width of the deformation twin band is affected by the distance between the upper and lower crack surfaces. The twin plane and twin direction are (<1(1)over bar>2) and [(1) over bar 11], respectively. The initial crack extension occurs in the deformation twin region near the crack tip. The simulation shows that the extension direction of the crack is changed as the crack propagates over the twinning boundary.

Estudio preliminar del comportamiento productivo y reproductivo de un hato criollo reyna bajo condiciones de confinamiento en Masatepe, Nicaragua

El presente trabajo se realizó con el objetivo de estudiar el comportamiento productivo y reproductivo de un hato criollo lechero Reyna, bajo condiciones de explotación en confinamiento, en la finca San José ubicada en Masatepe, Masaya, Nicaragua. Se analizaron 148 registros productivos y reproductivos correspondientes al período 1982 a 1989. Las características estudiadas fueron producción de leche total por lactancia (PLTOT), producción de leche ajustada a 305 días (PL305), duración de la lactancia (DL), intervalo entre partos (IEP) y edad al primer parto (EPP), además se evaluó el comportamiento de la curva de lactancia y se estimaron los parámetros que la caracterizan (a) parámetro que regula la producción inicial, (b) parámetro que regula el ascenso al pico y (c) parámetro que regula la declinación post pico, a partir de pico (RP), análisis se éstos se calcularon las variables rendimiento al tiempo al pico (TP) y la persistencia (S). En los utilizaron los métodos 1) Mínimos cuadrados (Harvey, 1987), 2) Iterativo de estimación no lineal (Mardquardt, 1968), 3) Modelo y ecuaciones propuestas por Wood, (1967) a través de procedimientos computarizados (Harvey, 1987 y SAS, 1987). Mediante análisis de varianza se estudió el efecto de los factores ambientales año de parto, época, número de partos y las interacciones año de parto por época y época por número de partos sobre PLT, PL305, DL, e IEP. Las medias de mínimos cuadrados obtenidas en este estudio fueron 1,577.65 ± 92.06 Kg, 1,560.64 ± 89.65 Kg, 264.23 ± 9.5 días, 425.96 ± 11.4 días y 1,401.08 ± 120 días para PLTOT, PL305, DL, IEP y EPP respectivamente. Los valores de a, b, c, RP, TP, y S fueron 4.19006 ± 0.5381, 0.221751 ± 0.0402, 0.005152 ± 0.00051, 7,73 Kg, 43.3 días y 6.43 % respectivamente. En el ANDEVA se encontró un efecto altamente significativo (P<0.01) del año de parto sobre las características estudiadas, resultando NS las otras fuentes de variación. Los valores y efectos antes señalados hacen notar que el criollo lechero no responde muy satisfactoriamente a condiciones de confinamiento, aunque es observable su ventaja productiva, respecto al promedio del hato nacional. Al caracterizar la curva de lactancia estimada para el hato y por número de partos ésta presentó valores sobre estimados de producción, respecto a la producción real, sin embargo no presentó atipicidad en su forma.

Efecto de distintos intervalos de mediciones de leche sobre la estimación de producción de leche total, repetibilidad y la forma de la curva de lactancia en un hato reyna

El presente trabajo se realizó con el objetivo de estudiar el efecto de cuatro intervalos de medición de leche (diario, cada 7, 14 y 28 días) sobre la producción de leche total, la repetibilidad y la forma de la curva de lactancia. Para lo cual se utilizaron los registros productivos y reproductivos del hato criollo Reyna de la Finca San José ubicada en Masatepe, Nicaragua. Se estudiaron 105 lactancia provenientes de 28 vacas durante el periodo de 1982 - 1990. Las características estudiadas fueron PLTOT, repetibilidad y la forma de la curva de lactancia. Todos los análisis estadísticos fueron realizados con el procedimiento de mínimos cuadrados y máxima verosimilitud establecido en el paquete estadístico LSMLMW

Producción y calidad de la materia seca del pasto estrella (Cynodon niemfuensis L. pers), durante la época de verano, en el departamento de Boaco, Nicaragua

El presente ensayo se realizó en la finca "La Camorra" propiedad del Señor Rodolfo Blandón Luquez. Entre octubre/97 abril/98, en el departamento de Boaco. Se utilizó un diseño experimental de bloques completamente al azar, se evaluaron los efectos de tres frecuencias de corte (21, 24, 27 días) sobre la producción y calidad de la materia seca del pasto Estrella (Cynodon nlemfuensis), durante la época de verano, sin fertilizar, como una forma de generar información a los ganaderos que manejan sus pasturas en todo el pais. Los resultados de los análisis de varianza y prueba de rangos múltiples (Duncan) determinaron que las frecuencias de cortes tuvieron diferencias significativas (p<0.05) sobre la producción de materia seca y materia verde. El mayor rendimiento de materia seca/corte se obtuvo en la frecuencia de 27 días con 1569.47 kg/ha y, la menor producción correspondió a 21 días (869.27 kg/ha). Los resultados del análisis realizados determinaron que existe diferencias significativa (p<0.05) de las frecuencias de corte sobre los porcentajes de proteína bruta. y fibra cruda encontrándose el mejor porcentaje de proteína a los 24 días con 10.8 y, el menor valor a los 27 días con 9.6. Con respecto a fibra cruda el mayor valor porcentual fue a los 27 días con 37.1 y, el menor a los 21 días con 32.7 El análisis económico determino que, para los tratamientos avaluados se obtuvieron ganancias, alcanzando mayor relación B/C para el tratamiento de 27 días de C$1.56.