Perceived environmental correlates and physical activity: What neighborhood aspects really matter for mothers and fathers of young children?

Limited research has been conducted with at-risk populations in examining perceived environmental correlates of physical activity (PA); thus, we examined this relationship among parents with young children, a group at risk for physical inactivity. Parents (252 mothers, 206 fathers) completed a questionnaire assessing measures of perceived neighborhood environment and a 1-week follow-up of PA behavior. Mothers were more likely than fathers to perceive their neighborhood as unsafe to go for walks at night and less likely to perceive transit stops within 10–15 minutes walking distance, sidewalks on most streets, and facilities to bicycle. Adjusting for demographics, shops within easy walking distance, sidewalks on most streets, and having no more than one motor vehicle were associated with being active for both sexes. Access to transit stops and free/low cost recreational facilities were also associated with mothers’ PA. These findings suggest that environmental factors may support parents being active at recommended levels.

Responding to a transformative stressor : climate change and the institutional governance of Australian cities

This paper understands climate change as a transformative stressor that will prompt responses from institutional governance frameworks in Australian cities. A transformative stressor is characterised as a chronic large-scale phenomenon which triggers a process of institutional change whereby institutions seek to reorientate their activities to better manage the social, economic and environmental impacts created by the transformative dynamic. It is posited that institutional change will be required as Australian metropolitan institutional governance frameworks seek to manage climate change effects in urban environments. It is argued that improved operationalisation of adaptation is required as part of a comprehensive urban response to the transformative stresses climate change and its effects are predicted to create in Australian cities. The operationalisation of adaptation refers to adaptation becoming incorporated, codified and implemented as a central principle of metro-regional planning governance. This paper has three key purposes. First, it examines theoretical and conceptual understandings of the role of transformative stressors in compelling institutional change within urban settings. Second, it establishes a conceptual approach that understands climate change as a transformative stressor requiring institutional change within the metropolitan planning frameworks of Australia's cities. Third, it offers early results and conclusions from an empirical investigation into the current prospects for operationalisation of climate adaptation in planning programs within Southeast Queensland (SEQ) via changes to institutional governance. A significant emerging conclusion is that early climate stresses appear not to be leading to episodic institutional change in the metropolitan planning frameworks of SEQ.

Operationalising climate adaptation through institutional change : conceptual and empirical insights

Adaptation is increasingly understood as a necessary response in respect of climate change impacts on urban settlements. Australia is heavily urbanised and climate change is likely to impact severely on its urban environments. Accordingly, climate adaptation must become a key component of urban management. This paper is part of a wider project and reports early insights into the problem of how adaptation may be institutionally operationalised within a planning regime. In this instance, the operationalisation of adaptation refers to adaptation becoming incorporated, codified and implemented as a central principle of planning governance. This paper has three key purposes: first, to set out a conceptual approach to climate adaptation as an institutional challenge; second, to identify the intersection of this problem with planning; third, to report on an on-going empirical investigation in Southeast Queensland (SEQ). Informed by key social scientific theories of institutionalism, this paper develops a conceptual framework that understands the metro-regional planning system of SEQ as an institutional regime capable of undergoing a process of change to respond to the adaptation imperative. It is posited that the success or failure of the SEQ regime’s response to the adaptation imperative is contingent on its ability to undergo institutional change. A capacity for change in this regard is understood to be subject to the influence of various internal and external barriers and pathways that promote or hinder processes of institutional change. Specific attention is paid to the role of ‘storylines’ in facilitating or blocking institutional change.

Modelling risk at low exposure railway level crossings : supporting an argument for low-cost level crossing warning devices with lower levels of safety integrity

This paper describes a risk model for estimating the likelihood of collisions at low-exposure railway level crossings, demonstrating the effect that differences in safety integrity can have on the likelihood of a collision. The model facilitates the comparison of safety benefits between level crossings with passive controls (stop or give-way signs) and level crossings that have been hypothetically upgraded with conventional or low-cost warning devices. The scenario presented illustrates how treatment of a cross-section of level crossings with low cost devices can provide a greater safety benefit compared to treatment with conventional warning devices for the same budget.

Improving level crossing safety through enhanced data recording and reporting : The CRC for Rail Innovation’s Baseline Rail Level Crossing Video project

This paper describes the work being conducted in the baseline rail level crossing project, supported by the Australian rail industry and the Cooperative Research Centre for Rail Innovation. The paper discusses the limitations of near-miss data for analysis obtained using current level crossing occurrence reporting practices. The project is addressing these limitations through the development of a data collection and analysis system with an underlying level crossing accident causation model. An overview of the methodology and improved data recording process are described. The paper concludes with a brief discussion of benefits this project is expected to provide the Australian rail industry.

Estimating the robustness of long-haul train plans

In Australia, and elsewhere, the movement of trains on long-haul rail networks is usually planned in advance. Typically, a train plan is developed to confirm that the required train movements and track maintenance activities can occur. The plan specifies when track segments will be occupied by particular trains and maintenance activities. On the day of operation, a train controller monitors and controls the movement of trains and maintenance crews, and updates the train plan in response to unplanned disruptions. It can be difficult to predict how good a plan will be in practice. The main performance indicator for a train service should be reliability - the proportion of trains running the service that complete at or before the scheduled time. We define the robustness of a planned train service to be the expected reliability. The robustness of individual train services and for a train plan as a whole can be estimated by simulating the train plan many times with random, but realistic, perturbations to train departure times and segment durations, and then analysing the distributions of arrival times. This process can also be used to set arrival times that will achieve a desired level of robustness for each train service.

Knowledge based urban development lessons from a non-western country : the Malaysia experience

Knowledge based urban development (KBUD) is seen as a new paradigm in urban planning and development which is now being implemented across the globe in order to increase the competitiveness of cities and regions. The KBUD concept has been widely applied in western and more developed countries over the last decade, and many have been proven successful. This paper, however, aims to provide an overview of the KBUD exercise in a context of a non western country scenario—Malaysia. Literature suggests that the urban development process in non western countries is different and very much focusing on physical elements. Whether this is the case or otherwise, this paper scrutinises the project of Multimedia Super Corridor (MSC), Malaysia, which is regarded as one of the first large scale manifestations of KBUD exercise in South East Asia. Based on development policies analysis and results of the interviews with the major stakeholders, this paper investigates the application of KBUD concept within the Malaysian context by examining the development and evolution of the city of Cyberjaya—the leading intelligent city of the MSC project. In the light of the literature and case findings, the paper provides recommendations and lessons learned, on the orchestration of KBUD, for other non western cities and regions that are working hard to develop KBUD strategies, strengthening their sustainable socio-spatial policies and seeking a global recognition.

Detecting anomalous events at railway level crossings

Collisions between pedestrians and vehicles continue to be a major problem throughout the world. Pedestrians trying to cross roads and railway tracks without any caution are often highly susceptible to collisions with vehicles and trains. Continuous financial, human and other losses have prompted transport related organizations to come up with various solutions addressing this issue. However, the quest for new and significant improvements in this area is still ongoing. This work addresses this issue by building a general framework using computer vision techniques to automatically monitor pedestrian movements in such high-risk areas to enable better analysis of activity, and the creation of future alerting strategies. As a result of rapid development in the electronics and semi-conductor industry there is extensive deployment of CCTV cameras in public places to capture video footage. This footage can then be used to analyse crowd activities in those particular places. This work seeks to identify the abnormal behaviour of individuals in video footage. In this work we propose using a Semi-2D Hidden Markov Model (HMM), Full-2D HMM and Spatial HMM to model the normal activities of people. The outliers of the model (i.e. those observations with insufficient likelihood) are identified as abnormal activities. Location features, flow features and optical flow textures are used as the features for the model. The proposed approaches are evaluated using the publicly available UCSD datasets, and we demonstrate improved performance using a Semi-2D Hidden Markov Model compared to other state of the art methods. Further we illustrate how our proposed methods can be applied to detect anomalous events at rail level crossings.

Empirical evaluation of public transport travel time variability

Although transit travel time variability is essential for understanding the deterioration of reliability, optimising transit schedule and route choice; it has not attracted enough attention from the literature. This paper proposes public transport-oriented definitions of travel time variability and explores the distributions of public transport travel time using the Transit Signal Priority data. First, definitions of public transport travel time variability are established by extending the common definitions of variability in the literature and by using route and services data of public transport vehicles. Second, the paper explores the distribution of public transport travel time. A new approach for analysing the distributions involving all transit vehicles as well as vehicles from a specific route is proposed. The Lognormal distribution is revealed as the descriptors for public transport travel time from the same route and service. The methods described in this study could be of interest for both traffic managers and transit operators for planning and managing the transit systems.

Residential dissonance and mode choice

Residential dissonance refers to the mismatch in land-use patterns between individuals’ preferred residential neighbourhood type and the type of neighbourhood in which they currently reside. Current knowledge regarding the impact of residential dissonance is limited to short-term travel behaviours in urban vs. suburban, and rural vs. urban areas. Although the prevailing view is that dissonants adjust their orientation and lifestyle around their surrounding land use over time, empirical evidence is lacking to support this proposition. This research identifies both short-term mode choice behaviour and medium-term mode shift behaviour of dissonants in transit oriented development (TODs) vs. non-TOD areas in Brisbane, Australia. Natural groupings of neighbourhood profiles (e.g. residential density, land use diversity, intersection density, cul-de-sac density, and public transport accessibility levels) of 3957 individuals were identified as living either in a TOD (510 individuals) or non-TOD (3447 individuals) areas in Brisbane using the TwoStep cluster analysis technique. Levels of dissonance were measured based on a factor analysis of 16 items representing the travel attitudes/preferences of individuals. Two multinomial logistic (MNL) regression models were estimated to understand mode choice behaviour of (1) TOD dissonants, and (2) non-TOD dissonants in 2009, controlling for socio-demographics and environmental characteristics. Two additional MNL regression models were estimated to investigate mode shift behaviour of (3) TOD dissonants, and (4) non-TOD dissonants between 2009 and 2011, also controlling for socio-demographic, changes in socio-demographic, and built environmental factors. The findings suggest that travel preference is relatively more influential in transport mode choice decisions compared with built environment features. Little behavioural evidence was found to support the adjustment of a dissonant orientation toward a particular land use feature and mode accessibility they represent (e.g. a modal shift to greater use of the car for non-TOD dissonants). TOD policies should focus on reducing the level of dissonance in TODs in order to enhance transit ridership.

Making the train : re-conceptualising accessibility for intra-urban rail travel

Australian authorities have set ambitious policy objectives to shift Australia’s current transport profile of heavy reliance on private motor cars to sustainable modes. Improving accessibility of public transport is a central component of that objective. Past studies on accessibility to public transport focus on walking time and/or waiting time. However, travellers’ perceptions of the interface leg journeys may depend not only on these direct and tangible factors but also on social and psychological factors. This paper extends previous research that identified five salient perspectives of rail access by means of a statement sorting activity and cluster analysis with a small sample of rail passengers in three Australian cities (Zuniga et al, 2013). This study collects a new data set including 144 responses from Brisbane and Melbourne to an online survey made up of a Likert-scaled statement sorting exercise and questionnaire. It employs factor analysis to examine the statement rankings and uncovers seven underlying factors in the exploratory manner, i.e., station, safety, access, transfer, service attitude, traveler’s physical activity levels, and environmental concern. Respondents from groups stratified by rail use frequency are compared in terms of their scores of those factors. Findings from this study indicate a need to re-conceptualize accessibility to intra-urban rail travel in agreement with current policy agenda, and to target behavioral intervention to multiple dimensions of accessibility influencing passengers’ travel choices. Arguments in this paper are not limited to intra-urban rail transit, but may also be relevant to public transport in general.

Making the train : re-conceptualising accessibility for intra-urban rail travel

Australian authorities have set ambitious policy objectives to shift Australia’s current transport profile of heavy reliance on private motor cars to sustainable modes. Improving accessibility of public transport is a central component of that objective. Past studies on accessibility to public transport focus on walking time and/or waiting time. However, travellers’ perceptions of the interface leg journeys may depend not only on these direct and tangible factors but also on social and psychological factors. This paper extends previous research that identified five salient perspectives of rail access by means of a statement sorting activity and cluster analysis with a small sample of rail passengers in three Australian cities (Zuniga et al, 2013). This study collects a new data set including 144 responses from Brisbane and Melbourne to an online survey made up of a Likert-scaled statement sorting exercise and questionnaire. It employs factor analysis to examine the statement rankings and uncovers seven underlying factors in the exploratory manner, i.e., station, safety, access, transfer, service attitude, traveler’s physical activity levels, and environmental concern. Respondents from groups stratified by rail use frequency are compared in terms of their scores of those factors. Findings from this study indicate a need to re-conceptualize accessibility to intra-urban rail travel in agreement with current policy agenda, and to target behavioral intervention to multiple dimensions of accessibility influencing passengers’ travel choices. Arguments in this paper are not limited to intra-urban rail transit, but may also be relevant to public transport in general.

Modelling busway station dwell time using smart cards

Dwell time at the busway station has a significant effect on bus capacity and delay. Dwell time has conventionally been estimated using models developed on the basis of field survey data. However field survey is resource and cost intensive, so dwell time estimation based on limited observations can be somewhat inaccurate. Most public transport systems are now equipped with Automatic Passenger Count (APC) and/or Automatic Fare Collection (AFC) systems. AFC in particular reduces on-board ticketing time, driver’s work load and ultimately reduces bus dwell time. AFC systems can record all passenger transactions providing transit agencies with access to vast quantities of data. AFC data provides transaction timestamps, however this information differs from dwell time because passengers may tag on or tag off at times other than when doors open and close. This research effort contended that models could be developed to reliably estimate dwell time distributions when measured distributions of transaction times are known. Development of the models required calibration and validation using field survey data of actual dwell times, and an appreciation of another component of transaction time being bus time in queue. This research develops models for a peak period and off peak period at a busway station on the South East Busway (SEB) in Brisbane, Australia.

“Would you; could you; on a boat?” Wait-time and travel-time activities during river ferry journeys and their relationship to overall satisfaction in Brisbane Queensland

This study investigates travel behaviour and wait-time activities as a component of passenger satisfaction with public transport in Brisbane, Australia. Australian transport planners recognise a variety of benefits to encouraging a mode shift away from automobile travel in favour of active and public transport use. Efforts to increase public transport ridership have included introducing state of the art passenger information systems, improving physical station access, and integrating system pricing, routes and scheduling for train, bus and ferry. Previous research regarding satisfaction with public transport emphasizes technical dimensions of service quality, including the timing and reliability of service. Those factors might be especially significant for frequent (commuting) travellers who look to balance the cost and efficiency of their travel options. In contrast, infrequent (leisure) passengers may be more concerned with way finding and the sensory experience of the journey. Perhaps due to the small relative proportion of trips made by river ferry compared to bus and rail, this mode of public transport has not received as much attention in travel-behaviour research. This case study of Brisbane’s river ferry system examines ferry passengers at selected terminals during peak and off-peak travel times to find out how travel behaviours and activities correlate to satisfaction with ferry travel. Data include 416 questionnaires completed by passengers intercepted during wait times at seven CityCat terminals in Brisbane. Descriptive statistical analysis revealed associations between specific wait time activities and satisfaction levels that could inform planners seeking to increase ridership and quality of life through ferry-oriented development.

Formative evaluation for improving collaborative planning : a case study at the regional scale

In an earlier paper (Cameron & Johnson 2004) we introduced the idea of formative evaluation (or evaluation for development), the purpose of which is to provide information for improving planning programs and activities. This type of evaluation differs from the two other types: outcome evaluation which aims to judge the success or otherwise of a program; and evaluation for knowledge which seeks to contribute to theoretical work on planning processes and activities. In the earlier paper we also outlined the first stage of formative evaluation in the SEQ 2021 regional planning exercise showing how the process of planning for community engagement was modified in light of the evaluation findings. This current paper details the second stage of formative evaluation in which the collaborative planning component of SEQ 2021 was evaluated, as such it further demonstrates how formative evaluation can be used to improve planning programs. The evaluation findings also provide insights into strategies for more effective collaborative planning. We begin with an overview of collaborative approaches to regional planning, including the SEQ 2021 regional planning program. We then outline formal and informal evaluations of various collaborative regional planning exercises, including the predecessor of SEQ 2021 - SEQ 2001. This sets the scene for discussion of the approach used to evaluate the collaborative component of SEQ 2021. After outlining the main findings from the evaluation and the ways these findings were used to refine the collaborative planning process we conclude with a series of recommendations, relevant not only to SEQ 2021 but to other collaborative planning exercises