Men's grooming in Germany: A consumer research and discussion of current consumer attitudes

The objective of this dissertation was to explore the German men’s grooming market and to discuss the usage and purchase behavior of young male adults. After a brief market analysis, this dissertation evaluates the results of qualitative and quantitative research. The conducted research explored the consumer’s reasoning for and attitude towards personal grooming, and their attitude towards product attributes and the aging process. The dissertation concludes that men attach high value to personal grooming but only to the extent that their personal need is satisfied. As the male involvement in MG is highly dependent on each consumer’s individual needs, the market requires a careful segmentation.

Implementation of a zebrafish health program in a research facility : A 4-year retrospective study

In the past two decades, zebrafish (Danio rerio)-based research has contributed to significant scientific advances. Still, husbandry and health programs did not evolve at the same pace, as evidenced by the absence of general guidelines. Health monitoring is essential to animal welfare, to permit animal exchanges across facilities, to contribute to robust experimental results, and for data reproducibility. In this study, we report a health program implemented in a zebrafish research facility to prevent, monitor, and control pathogen, and disease dissemination. This program includes quarantine, routine health screening of sentinels, and nonroutine screenings of retired animals and sick/moribund individuals. An extensive list of clinical signs, lesions, and pathogens was monitored based on: daily observation of fish, necropsy, histology, and bacterial culture. The results indicate that the combined analysis of sentinels with the evaluation of sick/moribund animals enables a comprehensive description not only of pathogen prevalence but also of clinical and histopathologic lesions of resident animals. The establishment of a quarantine program revealed to be effective in the reduction of Pseudoloma neurophilia frequency in the main aquaria room. Finally, characterization of the colony health status based on this multiapproach program shows a low prevalence of lesions and pathogens in the facility.

Responsible research and innovation: a global perspective

Based on the paper presented at the Doctorate Conference on Technologogy Assessment in July 2013 at the University Nova Lisboa, Caparica campus

Responsible research and innovation: a global perspective

Based on the paper presented at the Doctorate Conference on Technologogy Assessment in July 2013 at the University Nova Lisboa, Caparica campus

From "Humanities and Computing" to "Digital Humanities": Digital Humanities in Portugal with a focus on Historical Research

In the following text I will develop three major aspects. The first is to draw attention to those who seem to have been the disciplinary fields where, despite everything, the Digital Humanities (in the broad perspective as will be regarded here) have asserted themselves in a more comprehensive manner. I think it is here that I run into greater risks, not only for what I have mentioned above, but certainly because a significant part, perhaps, of the achievements and of the researchers might have escaped the look that I sought to cast upon the past few decades, always influenced by my own experience and the work carried out in the field of History. But this can be considered as a work in progress and it is open to criticism and suggestions. A second point to note is that emphasis will be given to the main lines of development in the relationship between historical research and digital methodologies, resources and tools. Finally, I will try to make a brief analysis of what has been the Digital Humanities discourse appropriation in recent years, with very debatable data and methods for sure, because studies are still scarce and little systematic information is available that would allow to go beyond an introductory reflection.

Arboviral diseases in the Western Brazilian Amazon: a perspective and analysis from a tertiary health & research center in Manaus, State of Amazonas

The Fundação de Medicina Tropical Dr. Heitor Vieira Dourado (FMT-HVD), located in Manaus, the capital of the State of Amazonas (Western Brazilian Amazon), is a pioneering institution in this region regarding the syndromic surveillance of acute febrile illness, including arboviral infections. Based on the data from patients at the FMT-HVD, we have detected recurrent outbreaks in Manaus by the four dengue serotypes in the past 15 years, with increasing severity of the disease. This endemicity has culminated in the simultaneous circulation of all four serotypes in 2011, the first time this has been reported in Brazil. Between 1996 and 2009, 42 cases of yellow fever (YF) were registered in the State of Amazonas, and 71.4% (30/42) were fatal. Since 2010, no cases have been reported. Because the introduction of the yellow fever virus into a large city such as Manaus, which is widely infested by Aedes mosquitoes, may pose a real risk of a yellow fever outbreak, efforts to maintain an appropriate immunization policy for the populace are critical. Manaus has also suffered silent outbreaks of Mayaro and Oropouche fevers lately, most of which were misdiagnosed as dengue fever. The tropical conditions of the State of Amazonas favor the existence of other arboviruses capable of producing human disease. Under this real threat, represented by at least 4 arboviruses producing human infections in Manaus and in other neighboring countries, it is important to develop an efficient public health surveillance strategy, including laboratories that are able to make proper diagnoses of arboviruses.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Guidelines on how to assess the validity of results presented in subgroup analysis of clinical trials

In observational studies, identification of associations within particular subgroups is the usual method of investigation. As an exploratory method, it is the bread and butter of epidemiological research. Nearly everything that has been learned in epidemiology has been derived from the analysis of subgroups. In a randomized clinical trial, the entire purpose is the comparison of the test subjects and the controls, and when there is particular interest in the results of treatment in a certain section of trial participants, a subgroup analysis is performed. These subgroups are examined to see if they are liable to a greater benefit or risk from treatment. Thus, analyzing patient subsets is a natural part of the process of improving therapeutic knowledge through clinical trials. Nevertheless, the reliability of subgroup analysis can often be poor because of problems of multiplicity and limitations in the numbers of patients studied. The naive interpretation of the results of such examinations is a cause of great confusion in the therapeutic literature. We emphasize the need for readers to be aware that inferences based on comparisons between subgroups in randomized clinical trials should be approached more cautiously than those based on the main comparison. That is, subgroup analysis results derived from a sound clinical trial are not necessarily valid; one must not jump to conclusions and accept the validity of subgroup analysis results without an appropriate judgment.

Dynamics of serotonergic neurons revealed by fiber photometry

This work was developed in the context of the MIT Portugal Program, area of Bioengineering Systems, in collaboration with the Champalimaud Research Programme, Champalimaud Center for the Unknown, Lisbon, Portugal. The project entitled Dynamics of serotonergic neurons revealed by fiber photometry was carried out at Instituto Gulbenkian de Ciência, Oeiras, Portugal and at the Champalimaud Research Programme, Champalimaud Center for the Unknown, Lisbon, Portugal

Development of human central nervous system 3D in vitro models for preclinical research

Neurological disorders are a major concern in modern societies, with increasing prevalence mainly related with the higher life expectancy. Most of the current available therapeutic options can only control and ameliorate the patients’ symptoms, often be-coming refractory over time. Therapeutic breakthroughs and advances have been hampered by the lack of accurate central nervous system (CNS) models. The develop-ment of these models allows the study of the disease onset/progression mechanisms and the preclinical evaluation of novel therapeutics. This has traditionally relied on genetically engineered animal models that often diverge considerably from the human phenotype (developmentally, anatomically and physiologically) and 2D in vitro cell models, which fail to recapitulate the characteristics of the target tissue (cell-cell and cell-matrix interactions, cell polarity). The in vitro recapitulation of CNS phenotypic and functional features requires the implementation of advanced culture strategies that enable to mimic the in vivo struc-tural and molecular complexity. Models based on differentiation of human neural stem cells (hNSC) in 3D cultures have great potential as complementary tools in preclinical research, bridging the gap between human clinical studies and animal models. This thesis aimed at the development of novel human 3D in vitro CNS models by integrat-ing agitation-based culture systems and a wide array of characterization tools. Neural differentiation of hNSC as 3D neurospheres was explored in Chapter 2. Here, it was demonstrated that human midbrain-derived neural progenitor cells from fetal origin (hmNPC) can generate complex tissue-like structures containing functional dopaminergic neurons, as well as astrocytes and oligodendrocytes. Chapter 3 focused on the development of cellular characterization assays for cell aggregates based on light-sheet fluorescence imaging systems, which resulted in increased spatial resolu-tion both for fixed samples or live imaging. The applicability of the developed human 3D cell model for preclinical research was explored in Chapter 4, evaluating the poten-tial of a viral vector candidate for gene therapy. The efficacy and safety of helper-dependent CAV-2 (hd-CAV-2) for gene delivery in human neurons was evaluated, demonstrating increased neuronal tropism, efficient transgene expression and minimal toxicity. The potential of human 3D in vitro CNS models to mimic brain functions was further addressed in Chapter 5. Exploring the use of 13C-labeled substrates and Nucle-ar Magnetic Resonance (NMR) spectroscopy tools, neural metabolic signatures were evaluated showing lineage-specific metabolic specialization and establishment of neu-ron-astrocytic shuttles upon differentiation. Chapter 6 focused on transferring the knowledge and strategies described in the previous chapters for the implementation of a scalable and robust process for the 3D differentiation of hNSC derived from human induced pluripotent stem cells (hiPSC). Here, software-controlled perfusion stirred-tank bioreactors were used as technological system to sustain cell aggregation and dif-ferentiation. The work developed in this thesis provides practical and versatile new in vitro ap-proaches to model the human brain. Furthermore, the culture strategies described herein can be further extended to other sources of neural phenotypes, including pa-tient-derived hiPSC. The combination of this 3D culture strategy with the implemented characterization methods represents a powerful complementary tool applicable in the drug discovery, toxicology and disease modeling.

Portuguese footwear

This case study deals with the reasons why the Portuguese Footwear Cluster evolved from a small industry focused on the Portuguese internal market into a high-tech industry capable of designing and producing some of the best and most expensive shoes in the world. It went from using the low labor costs of an under-developed economy to produce long series of shoes for pre-designated brands in Northern Europe to having the ability to produce some of the highest quality shoes in the world, in small orders, designed and delivered in record timing, while offering a service of excellence. In 1960, when Portugal became a founding member of EFTA, the footwear industry in Portugal was globally irrelevant, producing low quality shoes directed to the puny internal market and its African colonies. The new free trade zone with economies much more developed that itself, led to the transfer of the labor-intensive, low skilled manufacture from the UK and Scandinavian countries to Portugal. Mostly through joint ventures, the industry was able to mechanize itself so it could produce shoes in long series at low prices. It grew based on that model up until the 1990s, when the emergence of the Asian countries meant either a different strategy or extinction. Taking advantage of a clarified leadership of its trade association, it used the European funds made available to it during the 1990s, to modernize its factory floors, so it could become more nimble and flexible, expand its design capabilities and dramatically change its image abroad. The role of the trade association, APICCAPS, was instrumental throughout the process going well beyond what came to be expected of trade associations. It used its privileged position to provide understanding regarding the current situation and competitive landscape, alerting for changes ahead and at the same time providing a strategic vision on how to deal with the challenges. Moreover, it helped companies get the resources they needed by creating a research center in collaboration with a University, by creating a process that allowed companies to learn from each other via the show casing of projects sponsored by the association or by helping industrials traveling to locations where new customers could be found. The case study provides insight on how the trade association leadership, which has no formal authority over its members, was able to guide and motivate an industry through a consistent positive approach. That approach focused on the solutions, on the opportunities and on the success stories of companies in the cluster rather than on what was wrong or needed to be addressed. Based on this case, one could use the leadership role of the trade association to discuss and change leaders’ roles and styles in other sectors or even companies.

Research posters’ eBook: according to 1st WORKSHOP with “Focus on experimental testing of cement based materials”

COST Action TU 1404

Exploring the potentialities of a new type of CFRP laminate for the simultaneous flexural and shear strengthening of RC beams: numerical research

This study aims to develop an innovative carbon fibre reinforced polymer (CFRP) laminate with a U configuration to address strengthening interventions, where the increment of both flexural and shear capacity of reinforced concrete (RC) elements is required. This strengthening solution combines the near surface mounted (NSM) and embedded through section (ETS) techniques in the same application, since these techniques have already evidenced high performance on flexural and shear strengthening of RC beams using FRP systems, respectively. In fact, the proposed hybrid technique aims to mobilize the advantages provided by these two strengthening techniques by using an innovative CFRP laminate. The strengthening efficacy of this new hybrid NSM/ETS technique was numerically assessed and compared to the corresponding efficiency of NSM and ETS techniques applied separately for the flexural and shear strengthening of RC beams, respectively. The numerical models are described and the main relevant results are presented and discussed.