Understanding the coping strategies of international students : a qualitative approach

International students encounter a range of additional challenges as a part of their tertiary study experience. A qualitative approach was used to understand the challenges faced by international students, coping strategies that promoted their personal resilience and advice they have for future international students. Twenty-two international students from an Australian university participated in four focus groups. The challenges identified by students included adjustment, social isolation, English language skills, academic difficulties, unmet expectations, employment, culture shock and psychological distress. Participants shared their own personal experiences and strategies used by them to cope and identified strategies that future students could use prior to leaving their home country and whilst in Australia to improve their adjustment. Uses of international student stories in prevention interventions are discussed.

An accessible method for teaching doctors about death certification

The World Health Organization recommends that data on mortality in its member countries are collected utilising the Medical Certificate of Cause of Death published in the instruction volume of the ICD-10. However, investment in health information processes necessary to promote the use of this certificate and improve mortality information is lacking in many countries. An appeal for support to make improvements has been launched through the Health Metrics Network’s MOVE-IT strategy (Monitoring of Vital Events – Information Technology) [World Health Organization, 2011]. Despite this international spotlight on the need for capture of mortality data and in the use of the ICD-10 to code the data reported on such certificates, there is little cohesion in the way that certifiers of deaths receive instruction in how to complete the death certificate, which is the main source document for mortality statistics. Complete and accurate documentation of the immediate, underlying and contributory causes of death of the decedent on the death certificate is a requirement to produce standardised statistical information and to the ability to produce cause-specific mortality statistics that can be compared between populations and across time. This paper reports on a research project conducted to determine the efficacy and accessibility of the certification module of the WHO’s newly-developed web based training tool for coders and certifiers of deaths. Involving a population of medical students from the Fiji School of Medicine and a pre and post research design, the study entailed completion of death certificates based on vignettes before and after access to the training tool. The ability of the participants to complete the death certificates and analysis of the completeness and specificity of the ICD-10 coding of the reported causes of death were used to measure the effect of the students’ learning from the training tool. The quality of death certificate completion was assessed using a Quality Index before and after the participants accessed the training tool. In addition, the views of the participants about accessibility and use of the training tool were elicited using a supplementary questionnaire. The results of the study demonstrated improvement in the ability of the participants to complete death certificates completely and accurately according to best practice. The training tool was viewed very positively and its implementation in the curriculum for medical students was encouraged. Participants also recommended that interactive discussions to examine the certification exercises would be an advantage.

An improved genetic algorithm and graph theory based method for optimal sectionalizer switch placement in distribution networks with DG

In this paper a new graph-theory and improved genetic algorithm based practical method is employed to solve the optimal sectionalizer switch placement problem. The proposed method determines the best locations of sectionalizer switching devices in distribution networks considering the effects of presence of distributed generation (DG) in fitness functions and other optimization constraints, providing the maximum number of costumers to be supplied by distributed generation sources in islanded distribution systems after possible faults. The proposed method is simulated and tested on several distribution test systems in both cases of with DG and non DG situations. The results of the simulations validate the proposed method for switch placement of the distribution network in the presence of distributed generation.

Impact of disability on families : Grandparents’ perspectives

Background Caring for a child with a disability can be a unique and challenging experience, with families often relying on informal networks for support. Often, grandparents are key support resources, yet little is known about their roles and experiences. Reporting on data collected in a larger Australian study, this article explores grandparents' experiences of caring for a child with a disability and the impact on their family relationships and quality of life. Method A qualitative purposive sampling design was utilised; semi-structured interviews were conducted with 22 grandparents (17 women, 5 men) of children with a disability. Grandparents ranged in age from 55 to 75 years old and lived within a 90-min drive of Brisbane, Australia. Interviews were transcribed and responses analysed using a thematic approach, identifying categories, themes and patterns. Findings Four key themes characterised grandparents' views about their role in the family: holding own emotions (decision to be positive), self-sacrifice (decision to put family needs first), maintaining family relationships (being the ‘go-between’) and quality of life for family in the future (concerns about the future). Conclusions Grandparents are central to family functioning and quality of life, but this contribution comes with a significant cost to their own personal well-being. Implications for policy, practice and research are discussed, particularly grandparents' fear that their family could not cope without their support.

Fitting in : a pervasive new graduate nurse need

Aim: This qualitative study aims to provide insight into how Australian New Graduate Nurses (NGNs) experienced their transition to acute care nursing practice. Method: Nine NGNs each participated in three in-depth interviews conducted across their first year of practice. Constant comparative analysis was used to identify the emergent themes. Findings: The desire to fit in (establishment of secure social bonds) with ward staff is an important element of NGN transition experiences. Fitting in was about feeling one's self to be part of a social group, and participants made it clear that their perceptions of their success in establishing secure and meaningful social bonds in each new ward was extremely important for their sense of being as NGNs. Current NGN Transition Programmes (NGNTPs) involve multiple ward rotations, increasing the demand for the NGN to fit in. Thus participants were engaged in a deeply personal transition experience that was not necessarily aligned with multiple ward rotations. Conclusions: Although NGNTPs have the word “transition” in their title, it may be that current programmes are more focussed on organisations’ desire to “orient” NGNs to working within the acute care setting than facilitating personal transitions to practice. Further investigation of the impact of NGNTPs on NGNs and the associated multiple ward rotations is required.

Using ‘think aloud’ as a strategy for learning clinical reasoning in high fidelity case-based simulation for undergraduate nursing students

AIMS This paper reports on the implementation of a research project that trials an educational strategy implemented over six months of an undergraduate third year nursing curriculum. This project aims to explore the effectiveness of ‘think aloud’ as a strategy for learning clinical reasoning for students in simulated clinical settings. BACKGROUND Nurses are required to apply and utilise critical thinking skills to enable clinical reasoning and problem solving in the clinical setting [1]. Nursing students are expected to develop and display clinical reasoning skills in practice, but may struggle articulating reasons behind decisions about patient care. For students learning to manage complex clinical situations, teaching approaches are required that make these instinctive cognitive processes explicit and clear [2-5]. In line with professional expectations, nursing students in third year at Queensland University of Technology (QUT) are expected to display clinical reasoning skills in practice. This can be a complex proposition for students in practice situations, particularly as the degree of uncertainty or decision complexity increases [6-7]. The ‘think aloud’ approach is an innovative learning/teaching method which can create an environment suitable for developing clinical reasoning skills in students [4, 8]. This project aims to use the ‘think aloud’ strategy within a simulation context to provide a safe learning environment in which third year students are assisted to uncover cognitive approaches that best assist them to make effective patient care decisions, and improve their confidence, clinical reasoning and active critical reflection on their practice. MEHODS In semester 2 2011 at QUT, third year nursing students will undertake high fidelity simulation, some for the first time commencing in September of 2011. There will be two cohorts for strategy implementation (group 1= use think aloud as a strategy within the simulation, group 2= not given a specific strategy outside of nursing assessment frameworks) in relation to problem solving patient needs. Students will be briefed about the scenario, given a nursing handover, placed into a simulation group and an observer group, and the facilitator/teacher will run the simulation from a control room, and not have contact (as a ‘teacher’) with students during the simulation. Then debriefing will occur as a whole group outside of the simulation room where the session can be reviewed on screen. The think aloud strategy will be described to students in their pre-simulation briefing and allow for clarification of this strategy at this time. All other aspects of the simulations remain the same, (resources, suggested nursing assessment frameworks, simulation session duration, size of simulation teams, preparatory materials). RESULTS Methodology of the project and the challenges of implementation will be the focus of this presentation. This will include ethical considerations in designing the project, recruitment of students and implementation of a voluntary research project within a busy educational curriculum which in third year targets 669 students over two campuses. CONCLUSIONS In an environment of increasingly constrained clinical placement opportunities, exploration of alternate strategies to improve critical thinking skills and develop clinical reasoning and problem solving for nursing students is imperative in preparing nurses to respond to changing patient needs. References 1. Lasater, K., High-fidelity simulation and the development of clinical judgement: students' experiences. Journal of Nursing Education, 2007. 46(6): p. 269-276. 2. Lapkin, S., et al., Effectiveness of patient simulation manikins in teaching clinical reasoning skills to undergraduate nursing students: a systematic review. Clinical Simulation in Nursing, 2010. 6(6): p. e207-22. 3. Kaddoura, M.P.C.M.S.N.R.N., New Graduate Nurses' Perceptions of the Effects of Clinical Simulation on Their Critical Thinking, Learning, and Confidence. The Journal of Continuing Education in Nursing, 2010. 41(11): p. 506. 4. Banning, M., The think aloud approach as an educational tool to develop and assess clinical reasoning in undergraduate students. Nurse Education Today, 2008. 28: p. 8-14. 5. Porter-O'Grady, T., Profound change:21st century nursing. Nursing Outlook, 2001. 49(4): p. 182-186. 6. Andersson, A.K., M. Omberg, and M. Svedlund, Triage in the emergency department-a qualitative study of the factors which nurses consider when making decisions. Nursing in Critical Care, 2006. 11(3): p. 136-145. 7. O'Neill, E.S., N.M. Dluhy, and C. Chin, Modelling novice clinical reasoning for a computerized decision support system. Journal of Advanced Nursing, 2005. 49(1): p. 68-77. 8. Lee, J.E. and N. Ryan-Wenger, The "Think Aloud" seminar for teaching clinical reasoning: a case study of a child with pharyngitis. J Pediatr Health Care, 1997. 11(3): p. 101-10.

Raising the voice of dissatisfaction : a qualitative study of the Queensland acute health care consumer and the experience of complaining

Research into complaints handling in the health care system has predominately focused on examining the processes that underpin the organisational systems. An understanding of the cognitive decisions made by patients that influence whether they are satisfied or dissatisfied with the care they are receiving has had limited attention thus far. This study explored the lived experiences of Queensland acute care patients who complained about some aspect of their inpatient stay. A purposive sample of sixteen participants was recruited and interviewed about their experience of making a complaint. The qualitative data gathered through the interview process was subjected to an Interpretative Phenomenological Analysis (IPA) approach, guided by the philosophical influences of Heidegger (1889-1976). As part of the interpretive endeavour of this study, Lazarus’ cognitive emotive model with situational challenge was drawn on to provide a contextual understanding of the emotions experienced by the study participants. Analysis of the research data, aided by Leximancer™ software, revealed a series of relational themes that supported the interpretative data analysis process undertaken. The superordinate thematic statements that emerged from the narratives via the hermeneutic process were ineffective communication, standards of care were not consistent, being treated with disrespect, information on how to complain was not clear, and perceptions of negligence. This study’s goal was to provide health services with information about complaints handling that can help them develop service improvements. The study patients articulated the need for health care system reform; they want to be listened to, to be acknowledged, to be believed, for people to take ownership if they had made a mistake, for mistakes not to occur again, and to receive an apology. For these initiatives to be fully realised, the paradigm shift must go beyond regurgitating complaints data metrics in percentages per patient contact, towards a concerted effort to evaluate what the qualitative complaints data is really saying. An opportunity to identify a more positive and proactive approach in encouraging our patients to complain when they are dissatisfied has the potential to influence improvements.

Dichotomy in the design studio : adapting to new blended learning environments

In a study aimed at better understanding how staff and students adapt to new blended studio learning environments (BSLE’s), a group of 165 second year architecture students at a large school of architecture in Australia were separated into two different design studio learning environments. 70% of students were allocated to a traditional studio design learning environment (TSLE) and 30% to a new, high technology embedded, prototype digital learning laboratory. The digital learning laboratory was purpose designed for the case-study users, adapted Student-Centred Active Learning Environment for Undergraduate Programs (SCALE-UP) principles, and built as part of a larger university research project. The architecture students attended the same lectures, followed the same studio curriculum and completed the same pieces of assessment; the only major differences were the teaching staff and physical environment within which the studios were conducted. At the end of the semester, the staff and students were asked to complete a questionnaire about their experiences and preferences within the two respective learning environments. Following this, participants were invited to participate in focus groups, where a synergistic approach was effected. Using a dual method qualitative approach, the questionnaire and survey data were coded and extrapolated using both thematic analysis and grounded theory methodology. The results from these two different approaches were compared, contrasted and finally merged, to reveal six distinct emerging themes, which were instrumental in offering resistance or influencing adaptation to, the new BLSE. This paper reports on the study, discusses the major contributors to negative resistance and proposes points for consideration, when transitioning from a TSLE to a BLSE.

An advanced meshless method for time fractional diffusion equation

Recently, because of the new developments in sustainable engineering and renewable energy, which are usually governed by a series of fractional partial differential equations (FPDEs), the numerical modelling and simulation for fractional calculus are attracting more and more attention from researchers. The current dominant numerical method for modeling FPDE is Finite Difference Method (FDM), which is based on a pre-defined grid leading to inherited issues or shortcomings including difficulty in simulation of problems with the complex problem domain and in using irregularly distributed nodes. Because of its distinguished advantages, the meshless method has good potential in simulation of FPDEs. This paper aims to develop an implicit meshless collocation technique for FPDE. The discrete system of FPDEs is obtained by using the meshless shape functions and the meshless collocation formulation. The stability and convergence of this meshless approach are investigated theoretically and numerically. The numerical examples with regular and irregular nodal distributions are used to validate and investigate accuracy and efficiency of the newly developed meshless formulation. It is concluded that the present meshless formulation is very effective for the modeling and simulation of fractional partial differential equations.

A node-based smoothed conforming point interpolation method (NS-CPIM) for elasticity problems

This paper formulates a node-based smoothed conforming point interpolation method (NS-CPIM) for solid mechanics. In the proposed NS-CPIM, the higher order conforming PIM shape functions (CPIM) have been constructed to produce a continuous and piecewise quadratic displacement field over the whole problem domain, whereby the smoothed strain field was obtained through smoothing operation over each smoothing domain associated with domain nodes. The smoothed Galerkin weak form was then developed to create the discretized system equations. Numerical studies have demonstrated the following good properties: NS-CPIM (1) can pass both standard and quadratic patch test; (2) provides an upper bound of strain energy; (3) avoid the volumetric locking; (4) provides the higher accuracy than those in the node-based smoothed schemes of the original PIMs.

Transportation behaviours of older adults : an investigation into car dependency in urban Australia

Aim: Increased car dependency amongst Australia's ageing population may result in increased social isolation and other health impacts associated with the cessation of driving. While public transport represents an alternative to car usage, patronage remains low amongst senior cohorts. This study investigates the facilitators and barriers to public transport patronage and the nature of car dependence among older Australians. Method: Data was gathered from a sample of 24 adults (mean = 70.33 years) through a combination of quantitative (remote behavioural observation) and qualitative (interviews) investigation. Results: Findings suggest factors of relative convenience, affordability and health/mobility dictate choices of transport mode. The car is considered more convenient for the majority of suburban trips irrespective of the availability of public transport. Conclusion: Policy attention should focus on providing better education and information regarding driving cessation and addressing aged-specific social aspects of public transport including the accommodation of various health and mobility issues.

A nanoscratch method for measuring hardness of thin films

Thin solid films were extensively used in the making of solar cells, cutting tools, magnetic recording devices, etc. As a result, the accurate measurement of mechanical properties of the thin films, such as hardness and elastic modulus, was required. The thickness of thin films normally varies from tens of nanometers to several micrometers. It is thus challenging to measure their mechanical properties. In this study, a nanoscratch method was proposed for hardness measurement. A three-dimensional finite element method (3-D FEM) model was developed to validate the nanoscratch method and to understand the substrate effect during nanoscratch. Nanoindentation was also used for comparison. The nanoscratch method was demonstrated to be valuable for measuring hardness of thin solid films.

An enriched radial point interpolation method based on weak-form and strong-form

In this article, an enriched radial point interpolation method (e-RPIM) is developed for computational mechanics. The conventional radial basis function (RBF) interpolation is novelly augmented by the suitable basis functions to reflect the natural properties of deformation. The performance of the enriched meshless RBF shape functions is first investigated using the surface fitting. The surface fitting results have proven that, compared with the conventional RBF, the enriched RBF interpolation has a much better accuracy to fit a complex surface than the conventional RBF interpolation. It has proven that the enriched RBF shape function will not only possess all advantages of the conventional RBF interpolation, but also can accurately reflect the deformation properties of problems. The system of equations for two-dimensional solids is then derived based on the enriched RBF shape function and both of the meshless strong-form and weak-form. A numerical example of a bar is presented to study the effectiveness and efficiency of e-RPIM. As an important application, the newly developed e-RPIM, which is augmented by selected trigonometric basis functions, is applied to crack problems. It has been demonstrated that the present e-RPIM is very accurate and stable for fracture mechanics problems.

Towards an understanding of teacher judgement in the context of social moderation

Social moderation involves teachers gathering together to discuss their judgements of the quality of student work and to reach agreement regarding the standard awarded. This qualitative study conducted over a three-year period investigated the social practice of moderation and the influence on teachers’ judgements of students work. An initial survey of teachers’ understandings of moderation and standards, pre-interviews of teachers who participated in the moderation meetings, observations of these meetings with a particular focus on one teacher (focus teachers) comprised the data collection methods. Data analysis involved organising, matching, coding, identifying patterns and themes using a constant comparative method. Socio-cultural theories of learning and assessment underpinned the approach to data analysis and proved helpful in explaining the diverse influences on teachers’ judgements beyond the task criteria, and the progressive development of shared understandings through engaging in professional discussions of students’ work. The study revealed that the process is not clear and linear and is influenced by factors such as the representation of the standards and the knowledge base of the teachers.