EU Cross-Border Cooperation and Conflict Transformation in the Basque and Irish Border Regions

Comparative research on violent conflict in the Basque Country and Ireland has yielded a sizable body of published academic work. Less well explored is the relationship between conflict transformation and cross-border cooperation in that specific comparative context. This paper provides a comparative examination of Third (not for profit) sector cross-border cooperation as conflict transformation in the Basque (France/Spain) and Irish (UK/Ireland) border regions. To what extent does cross-border cooperation contribute to peacebuilding in the two last violent ethnonationalist conflicts in Western Europe? The comparison is based on the premise that the EU played a different role in both cases. In the Irish case, the EU contributed to the institutionalization of a peace process that included cross-border cooperation between third sector organizations among the policy instruments contributing to conflict transformation. In the Basque case, the unilateral renunciation of violence by ETA (Euskadi eta Askatasuna) in 2010 did not generate the consistent involvement of the EU in a comparable institutional peace process. However, some third sector organizations used EU instruments for cross-border economic, social and cultural cooperation between France and Spain in order to reinforce their cross-border networks, which indirectly impacted on conflict transformation. The effectiveness of this cross-border cooperation for conflict transformation is assessed comparatively. To what extent does this increase in cross-border cooperation “from below” connect to wider institutional and social processes of conflict transformation in Ireland and the Basque Country? Crucially, does the strengthening of cross-border relations on shared issues mollify or sharpen existing identity cleavages? Also considered is the sustainability of such cooperation in these regions in light of the less favourable post-2004 EU funding environment, and the post-2008 economic and political turmoil affecting the relevant EU member states, especially Ireland and Spain.

The challenge of MNCs and development: oil extraction, CSR, Nigeria and corruption

Globalisation has led to a shift in world order with the rise of the corporate non-state actor. This rise has led to an assumption that Multi-National Corporations (MNCs) must assume responsibilities beyond profit maximisation for shareholders. With the rise of the MNC as a corporate non-state actor there have been discussions around the role of business with regard to human rights.

This article looks at the case of oil extraction in Nigeria. Focussing on the historical dependency of Nigeria and the evolution of the state into a resource-dependent country, it looks at the limitations of existing human rights obligations as they relate to business. This article proposes that corporate social responsibility (CSR) policies of MNCs can act as a preliminary stage in the quest for wider human rights protections. It is in motivating MNCs to design and implement effective CSR policies in dependent states like Nigeria, that the challenge lies.

A Constrained Optimization Approach to Dynamic State Estimation for Power Systems Including PMU and Missing Measurements.

In this brief, a hybrid filter algorithm is developed to deal with the state estimation (SE) problem for power systems by taking into account the impact from the phasor measurement units (PMUs). Our aim is to include PMU measurements when designing the dynamic state estimators for power systems with traditional measurements. Also, as data dropouts inevitably occur in the transmission channels of traditional measurements from the meters to the control center, the missing measurement phenomenon is also tackled in the state estimator design. In the framework of extended Kalman filter (EKF) algorithm, the PMU measurements are treated as inequality constraints on the states with the aid of the statistical criterion, and then the addressed SE problem becomes a constrained optimization one based on the probability-maximization method. The resulting constrained optimization problem is then solved using the particle swarm optimization algorithm together with the penalty function approach. The proposed algorithm is applied to estimate the states of the power systems with both traditional and PMU measurements in the presence of probabilistic data missing phenomenon. Extensive simulations are carried out on the IEEE 14-bus test system and it is shown that the proposed algorithm gives much improved estimation performances over the traditional EKF method.

Study of oxidation and non-enzymatic glycosylation posttranslational modifications using a proteomic approach

A glicosilação não-enzimática e o stress oxidativo representam dois processos importantes visto desempenharem um papel importante no que respeita às complicações de vários processos patofisiológicos. No presente, a associação entre a glicosilação não-enzimática e a oxidação de proteínas é reconhecida como sendo um dos principais responsáveis pela acumulação de proteínas não-funcionais que, por sua vez, promove uma contínua sensibilização para um aumento do stress oxidativo ao nível celular. Embora esteja disponível bastante informação no que respeita aos dois processos e suas consequências ao nível estrutural e funcional, permanecem questões por esclarecer acerca do que se desenvolve ao nível molecular. Com o objectivo de contribuir para uma melhor compreensão da relação entre a glicosilação não-enzimática e a oxidação, proteínas modelo (albumina, insulina e histonas H2B e H1) foram submetidas a sistemas in vitro de glicosilação não-enzimática e oxidação em condições controladas e durante um período de tempo específico. A identificação dos locais de glicosilação e oxidação foi realizada através de uma abordagem proteómica, na qual após digestão enzimática se procedeu à análise por cromatografia líquida acoplada a espectrometria de massa tandem (MALDI-TOF/TOF). Esta abordagem permitiu a obtenção de elevadas taxas de cobertura das sequências proteicas, permitindo a identificação dos locais preferenciais de glicosilação e oxidação nas diferentes proteínas estudadas. Como esperado, os resíduos de lisina foram os preferencialmente glicosilados. No que respeita à oxidação, além das modificações envolvendo hidroxilações e adições de oxigénio, foram identificadas deamidações, carbamilações e conversões oxidativas específicas de vários aminoácidos. No geral, os resíduos mais afectados pela oxidação foram os resíduos de cisteína, metionina, triptofano, tirosina, prolina, lisina e fenilalanina. Ao longo do período de tempo estudado, os resultados indicaram que a oxidação teve início em zonas expostas da proteína e/ou localizadas na vizinhança de resíduos de cisteína e metionina, ao invés de exibir um comportamente aleatório, ocorrendo de uma forma nãolinear por sua vez dependente da estabilidade conformacional da proteína. O estudo ao longo do tempo mostrou igualmente que, no caso das proteínas préglicosiladas, a oxidação das mesmas ocorreu de forma mais rápida e acentuada, sugerindo que as alterações estruturais induzidas pela glicosilação promovem um estado pro-oxidativo. No caso das proteínas pré-glicosiladas e oxidadas, foi identificado um maior número de modificações oxidativas assim como de resíduos modificados na vizinhança de resíduos glicosilados. Com esta abordagem é realizada uma importante contribuição na investigação das consequências do dano ‘glico-oxidativo’ em proteínas ao nível molecular através da combinação da espectrometria de massa e da bioinformática.

Characterization and modelling of software defined radio front-ends

O presente trabalho tem por objectivo estudar a caracterização e modelação de arquitecturas de rádio frequência para aplicações em rádios definidos por software e rádios cognitivos. O constante aparecimento no mercado de novos padrões e tecnologias para comunicações sem fios têm levantado algumas limitações à implementação de transceptores rádio de banda larga. Para além disso, o uso de sistemas reconfiguráveis e adaptáveis baseados no conceito de rádio definido por software e rádio cognitivo assegurará a evolução para a próxima geração de comunicações sem fios. A ideia base desta tese passa por resolver alguns problemas em aberto e propor avanços relevantes, tirando para isso partido das capacidades providenciadas pelos processadores digitais de sinal de forma a melhorar o desempenho global dos sistemas propostos. Inicialmente, serão abordadas várias estratégias para a implementação e projecto de transceptores rádio, concentrando-se sempre na aplicabilidade específica a sistemas de rádio definido por software e rádio cognitivo. Serão também discutidas soluções actuais de instrumentação capaz de caracterizar um dispositivo que opere simultaneamente nos domínios analógico e digital, bem como, os próximos passos nesta área de caracterização e modelação. Além disso, iremos apresentar novos formatos de modelos comportamentais construídos especificamente para a descrição e caracterização não-linear de receptores de amostragem passa-banda, bem como, para sistemas nãolineares que utilizem sinais multi-portadora. Será apresentada uma nova arquitectura suportada na avaliação estatística dos sinais rádio que permite aumentar a gama dinâmica do receptor em situações de multi-portadora. Da mesma forma, será apresentada uma técnica de maximização da largura de banda de recepção baseada na utilização do receptor de amostragem passa-banda no formato complexo. Finalmente, importa referir que todas as arquitecturas propostas serão acompanhadas por uma introdução teórica e simulações, sempre que possível, sendo após isto validadas experimentalmente por protótipos laboratoriais.

Materials and concepts for CO2 lean ironmaking by pyroelectrolysis

The main purpose of this PhD thesis was to provide convincing demonstration for a breakthrough concept of pyroelectrolysis at laboratory scale. One attempted to identify fundamental objections and/or the most critical constraints, to propose workable concepts for the overall process and for feasible electrodes, and to establish the main requirements on a clearer basis. The main effort was dedicated to studying suitable anode materials to be developed for large scale industrial units with molten silicate electrolyte. This concept relies on consumable anodes based on iron oxides, and a liquid Fe cathode, separated from the refractory materials by a freeze lining (solid) layer. In addition, one assessed an alternative concept of pyroelectrolysis with electron blocking membranes, and developed a prototype at small laboratory scale. The main composition of the molten electrolyte was based on a magnesium aluminosilicate composition, with minimum liquidus temperature, and with different additions of iron oxide. One studied the dynamics of devitrification of these melts, crystallization of iron oxides or other phases, and Fe2+/Fe3+ redox changes under laser zone melting, at different pulling rates. These studies were intended to provide guidelines for dissolution of raw materials (iron oxides) in the molten electrolyte, to assess compatibility with magnetite based consumable anodes, and to account for thermal gradients or insufficient thermal management in large scale cells. Several laboratory scale prototype cells were used to demonstrate the concept of pyroelectrolysis with electron blocking, and to identify the most critical issues and challenges. Operation with and without electron blocking provided useful information on transport properties of the molten electrolyte (i.e., ionic and electronic conductivities), their expected dependence on anodic and cathodic overpotentials, limitations in faradaic efficiency, and onset of side electrochemical reactions. The concept of consumable anodes was based on magnetite and derived spinel compositions, for their expected redox stability at high temperatures, even under oxidising conditions. Spinel compositions were designed for prospective gains in refractoriness and redox stability in wider ranges of conditions (T, pO2 and anodic overpotentials), without excessive penalty for electrical conductivity, thermomechanical stability or other requirements. Composition changes were also mainly based on components of the molten aluminosilicate melt, to avoid undue contamination and to minimize the dissolution rate of consumable anodes. Additional changes in composition were intended for prospective pyroelectrolysis of Fe alloys, with additions of different elements (Cr, Mn, Ni, Ti).

Using creative problem solving (CPS) to improve leadership in a non-profit organization

The purpose of this study was to evaluate the effectiveness of the Creative Problem Solving (CPS) method in improving the leadership process in a non-profit organization. The research was designed around an intervention and structured in three stages (pre-consult, intervention and follow-up), with a team designated by management, in order to bring leadership cohesion to both departments of the organization and also between the board and executive management. The results, expressed in the tasks performed and in the interviews to team members, allowed us to conclude on the effectiveness of the CPS method to improve organizational leadership, by establishing a stronger relationship between departments, as well as, in the long term, between the board and executive management. These results highlight possible solutions to improve the leadership of non-profit organizations.

Hotel Brand Conversions: What Works and What Doesn’t

As many as one-third of U.S. hotels have been converted from one brand to another in recent years, a process that frequently improves the hotel’s financial performance—although that is not always the case. Using data collected between 1994 and 2012 from PKF Hospitality Research, an analysis of brand conversions by 260 hotels shows that hotels moving downscale generally improved their occupancy, and thus their top-line revenue and profit ratios, compared to a control group of 2,750 hotels that did not change brands. However, hotels that moved upscale did not see notable changes in revenue or profit, nor did hotels that moved across their tier, especially when they stayed within their brand family. Two factors seem to drive the financial results for converted hotels—the relative strength of the brand and the fit between the brand and the property.

Does Cost-Effectiveness Analysis Have a Role in US Managed Care Drug Formularies? An Empirical Study of Utilization, Costs, Outcomes, and Elasticity of Demand of a Value-Based Formulary

Thesis (Ph.D.)--University of Washington, 2015

Solving MPCC problem with the hyperbolic penalty function

The main goal of this work is to solve mathematical program with complementarity constraints (MPCC) using nonlinear programming techniques (NLP). An hyperbolic penalty function is used to solve MPCC problems by including the complementarity constraints in the penalty term. This penalty function [1] is twice continuously differentiable and combines features of both exterior and interior penalty methods. A set of AMPL problems from MacMPEC [2] are tested and a comparative study is performed.

Solving a signalized traffic intersection problem with an hyperbolic penalty function

Mathematical Program with Complementarity Constraints (MPCC) finds many applications in fields such as engineering design, economic equilibrium and mathematical programming theory itself. A queueing system model resulting from a single signalized intersection regulated by pre-timed control in traffic network is considered. The model is formulated as an MPCC problem. A MATLAB implementation based on an hyperbolic penalty function is used to solve this practical problem, computing the total average waiting time of the vehicles in all queues and the green split allocation. The problem was codified in AMPL.

Derivative-free optimization and filter methods to solve nonlinear constrained problems

In real optimization problems, usually the analytical expression of the objective function is not known, nor its derivatives, or they are complex. In these cases it becomes essential to use optimization methods where the calculation of the derivatives, or the verification of their existence, is not necessary: the Direct Search Methods or Derivative-free Methods are one solution. When the problem has constraints, penalty functions are often used. Unfortunately the choice of the penalty parameters is, frequently, very difficult, because most strategies for choosing it are heuristics strategies. As an alternative to penalty function appeared the filter methods. A filter algorithm introduces a function that aggregates the constrained violations and constructs a biobjective problem. In this problem the step is accepted if it either reduces the objective function or the constrained violation. This implies that the filter methods are less parameter dependent than a penalty function. In this work, we present a new direct search method, based on simplex methods, for general constrained optimization that combines the features of the simplex method and filter methods. This method does not compute or approximate any derivatives, penalty constants or Lagrange multipliers. The basic idea of simplex filter algorithm is to construct an initial simplex and use the simplex to drive the search. We illustrate the behavior of our algorithm through some examples. The proposed methods were implemented in Java.

Direct-search penalty/barrier methods

In Nonlinear Optimization Penalty and Barrier Methods are normally used to solve Constrained Problems. There are several Penalty/Barrier Methods and they are used in several areas from Engineering to Economy, through Biology, Chemistry, Physics among others. In these areas it often appears Optimization Problems in which the involved functions (objective and constraints) are non-smooth and/or their derivatives are not know. In this work some Penalty/Barrier functions are tested and compared, using in the internal process, Derivative-free, namely Direct Search, methods. This work is a part of a bigger project involving the development of an Application Programming Interface, that implements several Optimization Methods, to be used in applications that need to solve constrained and/or unconstrained Nonlinear Optimization Problems. Besides the use of it in applied mathematics research it is also to be used in engineering software packages.

Self-Scheduling for energy and spinning reserve of wind/CSP plants by a MILP approach

This paper is on the self-scheduling for a power producer taking part in day-ahead joint energy and spinning reserve markets and aiming at a short-term coordination of wind power plants with concentrated solar power plants having thermal energy storage. The short-term coordination is formulated as a mixed-integer linear programming problem given as the maximization of profit subjected to technical operation constraints, including the ones related to a transmission line. Probability density functions are used to model the variability of the hourly wind speed and the solar irradiation in regard to a negative correlation. Case studies based on an Iberian Peninsula wind and concentrated solar power plants are presented, providing the optimal energy and spinning reserve for the short-term self-scheduling in order to unveil the coordination benefits and synergies between wind and solar resources. Results and sensitivity analysis are in favour of the coordination, showing an increase on profit, allowing for spinning reserve, reducing the need for curtailment, increasing the transmission line capacity factor. (C) 2014 Elsevier Ltd. All rights reserved.

Strength prediction of single- and double-lap joints by standard and extended finite element modelling

The structural integrity of multi-component structures is usually determined by the strength and durability of their unions. Adhesive bonding is often chosen over welding, riveting and bolting, due to the reduction of stress concentrations, reduced weight penalty and easy manufacturing, amongst other issues. In the past decades, the Finite Element Method (FEM) has been used for the simulation and strength prediction of bonded structures, by strength of materials or fracture mechanics-based criteria. Cohesive-zone models (CZMs) have already proved to be an effective tool in modelling damage growth, surpassing a few limitations of the aforementioned techniques. Despite this fact, they still suffer from the restriction of damage growth only at predefined growth paths. The eXtended Finite Element Method (XFEM) is a recent improvement of the FEM, developed to allow the growth of discontinuities within bulk solids along an arbitrary path, by enriching degrees of freedom with special displacement functions, thus overcoming the main restriction of CZMs. These two techniques were tested to simulate adhesively bonded single- and double-lap joints. The comparative evaluation of the two methods showed their capabilities and/or limitations for this specific purpose.