Design of a new laboratory for quality control of mussel produced in Sagres

Dissertação de mestrado, Qualidade em Análises, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Development of a novel platform for high-throughput gene design and artificial gene synthesis to produce large libraries of recombinant venom peptides for drug discovery

Tese de Doutoramento em Ciências Veterinárias na Especialidade de Ciências Biológicas e Biomédicas

Spatial and Functional Organization of Pig Trade in Different European Production Systems: Implications for Disease Prevention and Control

Understanding the complexity of live pig trade organization is a key factor to predict and control major infectious diseases, such as classical swine fever (CSF) or African swine fever (ASF). Whereas the organization of pig trade has been described in several European countries with indoor commercial production systems, little information is available on this organization in other systems, such as outdoor or small-scale systems. The objective of this study was to describe and compare the spatial and functional organization of live pig trade in different European countries and different production systems. Data on premise characteristics and pig movements between premises were collected during 2011 from Bulgaria, France, Italy, and Spain, which swine industry is representative of most of the production systems in Europe (i.e., commercial vs. small-scale and outdoor vs. indoor). Trade communities were identified in each country using the Walktrap algorithm. Several descriptive and network metrics were generated at country and community levels. Pig trade organization showed heterogeneous spatial and functional organization. Trade communities mostly composed of indoor commercial premises were identified in western France, northern Italy, northern Spain, and north-western Bulgaria. They covered large distances, overlapped in space, demonstrated both scale-free and small-world properties, with a role of trade operators and multipliers as key premises. Trade communities involving outdoor commercial premises were identified in western Spain, south-western and central France. They were more spatially clustered, demonstrated scale-free properties, with multipliers as key premises. Small-scale communities involved the majority of premises in Bulgaria and in central and Southern Italy. They were spatially clustered and had scale-free properties, with key premises usually being commercial production premises. These results indicate that a disease might spread very differently according to the production system and that key premises could be targeted to more cost-effectively control diseases. This study provides useful epidemiological information and parameters that could be used to design risk-based surveillance strategies or to more accurately model the risk of introduction or spread of devastating swine diseases, such as ASF, CSF, or foot-and-mouth disease.

Survey of quantitative antimicrobial consumption per production stage in farrow-to-finish pig farms in Spain

Objectives: To characterise antimicrobial use (AMU) per production stage in terms of drugs, routes of application, indications, duration and exposed animals in farrow-to-finish pig farms in Spain. Design: Survey using a questionnaire on AMU during the six months prior to the interview, administered in face-to-face interviews completed from April to October 2010. Participants: 108 potentially eligible farms covering all the country were selected using a multistage sampling methodology; of these, 33 were excluded because they did not fulfil the participation criteria and 49 were surveyed. Results: The rank of the most used antimicrobials per farm and production stage and administration route started with polymyxins (colistin) by feed during the growing and the preweaning phases, followed by β-lactams by feed during the growing and the preweaning phases and by injection during the preweaning phase. Conclusions: The study demonstrates that the growing stage (from weaning to the start of finishing) has the highest AMU according to different quantitative indicators (number of records, number of antimicrobials used, percentage of farms reporting use, relative number of exposed animals per farm and duration of exposure); feed is the administration route that produces the highest antimicrobial exposure based on the higher number of exposed animals and the longer duration of treatment; and there are large differences in AMU among individual pig farms.

The Academic-enterprise experiences framework as a guide for design education

The establishment of support platforms for the development of a new culture in design education, in order to achieve both research exploitation and its results, as an approach to the industrial community, challenges higher education institutions to rethink their functioning, divided between investigation on their own initiative or on demand, and its usefulness / practical application. At the same time, through design education, how can they be the engine that aggregates all these frequently antagonistic interests? Polytechnic institutes are predisposed to collaboration and interdisciplinarity. In our course of Technology and Design of Furniture, the availability of a production unit, testing laboratories, and expertise in engineering, design and marketing, encourage the development of a holistic project. In order to develop such knowledge, we adapt three important ways of thinking in designing interactions influenced by the traditional approach, namely, 1) identifying and understanding a design problem, i.e. a market need, 2) defining the design process and knowing what can be used for design education, i.e. opportunities for design education, and 3) sustainability of this framework and design projects' alignment with education in the same field. We explain our approach by arguing from the academicenterprise experiences perspective. This concept is proposed as a way to achieve those three ways of thinking in design education. Then, a set of interaction attributes is defined to explain how engineering and product design education can enhance meaningful relations with manufacturers, stakeholders and society in general. A final discussion is presented with the implications and benefits of this approach. The results suggest that through academic-enterprise partnerships in design, several goals such as students' motivation, product design innovation and potential for knowledge transfer to industries can be achieved.

Biomethane production from macroalgae

Irish brown seaweeds have been identified as a potential bio-resource with potentially high specific methane yields. Anaerobic digestion is deemed the most feasible technology due to its commercial viability for handling such wet feedstock. However, the biomethane potential of seaweed is highly dependent on its chemical composition which can vary by species type, cultivation method, and time of harvest. This study aims to investigate and optimize the process for the production of biomethane from Irish brown seaweeds focusing on the key technology bottlenecks including for seaweed characterization, biomethane potential assessment, optimization of long-term anaerobic digestion and suitable pre-treatment technologies to enhance potential gas yields. Laminaria digitata and Ascophyllum nodosum were tested for seasonal variation. From the characterization and batch digestion of L. digitata, August was found to be the optimal month for harvest due to high organic matter content, low level of ash and ultimately highest biomethane yield. The specific methane yield of 53 m3 CH4 t-1 wwt in August was 4.5 times higher than the yield in December (12 m3 CH4 t-1 wwt), with ash content the key factor in seasonal variation. For A. nodosum, the optimal harvest month was October with polyphenol content found to be a more influential factor than ash. The gross energy yields from both species were evaluated in the range of 116-200 GJ ha-1 yr-1. Continuous digestion trials were subsequently designed for S. latissima and L. digitata to optimize the key digestion parameters. Results from mono-digestion and co-digestion with dairy slurry revealed that both seaweeds could be digested at maximum biomethane efficiency to a loading rate of 4 kg VS m-3 d-1. Accumulation of salt in the digesters was a concern for long term digestion and it was reasoned that suitable pretreatment may be required prior to digestion. Various pre-treatments were subsequently tested on L. digitata to enhance the gas yield. It was found that maceration after hot water washing yielded 25% more specific methane and up to 54% salt removal as compared to untreated L. digitata. The experiments undertaken aim to assist in providing a basic guideline for feasible design and operation of seaweed digesters in Ireland.

Engineering design of an integrated sustainable process system for cassava biobased materials

Cassava contributes significantly to biobased material development. Conventional approaches for its bio-derivative-production and application cause significant wastes, tailored material development challenges, with negative environmental impact and application limitations. Transforming cassava into sustainable value-added resources requires redesigning new approaches. Harnessing unexplored material source, and downstream process innovations can mitigate challenges. The ultimate goal proposed an integrated sustainable process system for cassava biomaterial development and potential application. An improved simultaneous release recovery cyanogenesis (SRRC) methodology, incorporating intact bitter cassava, was developed and standardized. Films were formulated, characterised, their mass transport behaviour, simulating real-distribution-chain conditions quantified, and optimised for desirable properties. Integrated process design system, for sustainable waste-elimination and biomaterial development, was developed. Films and bioderivatives for desired MAP, fast-delivery nutraceutical excipients and antifungal active coating applications were demonstrated. SRRC-processed intact bitter cassava produced significantly higher yield safe bio-derivatives than peeled, guaranteeing 16% waste-elimination. Process standardization transformed entire root into higher yield and clarified colour bio-derivatives and efficient material balance at optimal global desirability. Solvent mass through temperature-humidity-stressed films induced structural changes, and influenced water vapour and oxygen permeability. Sevenunit integrated-process design led to cost-effectiveness, energy-efficient and green cassava processing and biomaterials with zero-environment footprints. Desirable optimised bio-derivatives and films demonstrated application in desirable in-package O2/CO2, mouldgrowth inhibition, faster tablet excipient nutraceutical dissolutions and releases, and thymolencapsulated smooth antifungal coatings. Novel material resources, non-root peeling, zero-waste-elimination, and desirable standardised methodology present promising process integration tools for sustainable cassava biobased system development. Emerging design outcomes have potential applications to mitigate cyanide challenges and provide bio-derivative development pathways. Process system leads to zero-waste, with potential to reshape current style one-way processes into circular designs modelled on nature's effective approaches. Indigenous cassava components as natural material reinforcements, and SRRC processing approach has initiated a process with potential wider deployment in broad product research development. This research contributes to scientific knowledge in material science and engineering process design.

Design, modelling and preliminary characterisation of microneedle-based electrodes for tissue electroporation in vivo

We analysed the use of microneedle-based electrodes to enhance electroporation of mouse testis with DNA vectors for production of transgenic mice. Different microneedle formats were developed and tested, and we ultimately used electrodes based on arrays of 500 μm tall microneedles. In a series of experiments involving injection of a DNA vector expressing Green Fluorescent Protein (GFP) and electroporation using microneedle electrodes and a commercially available voltage supply, we compared the performance of flat and microneedle electrodes by measuring GFP expression at various timepoints after electroporation. Our main finding, supported by both experimental and simulated data, is that needles significantly enhanced electroporation of testis.

Design and application of experimental methods for steel sheet shearing

Shearing is the process where sheet metal is mechanically cut between two tools. Various shearing technologies are commonly used in the sheet metal industry, for example, in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material. The constant development of sheet metals toward higher strength and formability leads to increased forces on the shearing equipment and tools. Shearing of new sheet materials imply new suitable shearing parameters. Investigations of the shearing parameters through live tests in the production are expensive and separate experiments are time consuming and requires specialized equipment. Studies involving a large number of parameters and coupled effects are therefore preferably performed by finite element based simulations. Accurate experimental data is still a prerequisite to validate such simulations. There is, however, a shortage of accurate experimental data to validate such simulations. In industrial shearing processes, measured forces are always larger than the actual forces acting on the sheet, due to friction losses. Shearing also generates a force that attempts to separate the two tools with changed shearing conditions through increased clearance between the tools as result. Tool clearance is also the most common shearing parameter to adjust, depending on material grade and sheet thickness, to moderate the required force and to control the final sheared edge geometry. In this work, an experimental procedure that provides a stable tool clearance together with accurate measurements of tool forces and tool displacements, was designed, built and evaluated. Important shearing parameters and demands on the experimental set-up were identified in a sensitivity analysis performed with finite element simulations under the assumption of plane strain. With respect to large tool clearance stability and accurate force measurements, a symmetric experiment with two simultaneous shears and internal balancing of forces attempting to separate the tools was constructed. Steel sheets of different strength levels were sheared using the above mentioned experimental set-up, with various tool clearances, sheet clamping and rake angles. Results showed that tool penetration before fracture decreased with increased material strength. When one side of the sheet was left unclamped and free to move, the required shearing force decreased but instead the force attempting to separate the two tools increased. Further, the maximum shearing force decreased and the rollover increased with increased tool clearance. Digital image correlation was applied to measure strains on the sheet surface. The obtained strain fields, together with a material model, were used to compute the stress state in the sheet. A comparison, up to crack initiation, of these experimental results with corresponding results from finite element simulations in three dimensions and at a plane strain approximation showed that effective strains on the surface are representative also for the bulk material. A simple model was successfully applied to calculate the tool forces in shearing with angled tools from forces measured with parallel tools. These results suggest that, with respect to tool forces, a plane strain approximation is valid also at angled tools, at least for small rake angles. In general terms, this study provide a stable symmetric experimental set-up with internal balancing of lateral forces, for accurate measurements of tool forces, tool displacements, and sheet deformations, to study the effects of important shearing parameters. The results give further insight to the strain and stress conditions at crack initiation during shearing, and can also be used to validate models of the shearing process.

Les mouvances réglementaires entourant la profession comptable au lendemain de crises financières : propagation du discours néolibéral, production de mythes et gouvernance en silo

C’est en réponse aux plus récentes crises financières que plusieurs processus réglementaires – dont certains constituent les objets d’étude de cette thèse – ont été déployés pour concevoir et implanter diverses réformes « d’amélioration » au sein de la pratique professionnelle des auditeurs financiers. Tant la crise du début des années 2000 que celle de 2007-2008 auraient attiré de vives critiques à l’égard du travail des auditeurs et de leur contribution (prétendument défaillante) au sein du fonctionnement des marchés des capitaux. Considérant leur fonction de « chien de garde » qui est censée assurer, avant tout, la protection du public au sein de ces marchés, il semblait inévitable que leur travail soit, dans une certaine mesure, remis en doute à travers les processus de révision réglementaire mis en place. C’est ainsi que chacun des trois articles qui composent cette thèse offre une analyse de différents aspects – tels que la mise en place, le déroulement, la nature et la substance des discours et des résultats – liés à ces processus de révision réglementaire qui entourent la pratique professionnelle des auditeurs au lendemain des crises financières. En somme, en plus d’indiquer comment ces processus ne sont point à l’abri de controverses, les conclusions de cette thèse inciteront à ce qu’une attention sérieuse soit portée à leur égard afin de préserver le bienfondé de la profession des comptables et des auditeurs. Alors que, dans le premier article, il sera question d’illustrer l’infiltration (critiquable) d’un discours néolibéral au sein des débats qui entourent les processus de révision réglementaire dont il est question, dans le deuxième article, il sera question d’exposer, au sein de ces processus, un mécanisme de production de mythes prônant un certain statu quo. Par ailleurs, dans le dernier article, en plus de mettre en évidence le fait que les approches de gouvernance déployées à travers ces processus de révision réglementaire ne sont pas suffisamment englobantes, on pourra aussi prendre conscience de l’inféodation de l’expertise de l’audit face à son environnement (et plus précisément, face aux expertises de la normalisation comptable et de la financiarisation de l’économie). Sous un regard critique, et à travers des analyses qualitatives, chacun des articles de cette thèse permettra de remettre en question certaines facettes des processus réglementaires et institutionnels qui entourent le champ de la comptabilité et de l’audit.

Développement d’un dispositif d’extrusion tridimensionnelle de sucre vitrifié pour la production de réseaux fluidiques complexes par moulage rapide

L’objectif du vaste projet de recherche dans lequel s’inscrit ce mémoire est de guérir le diabète de type 1 en fabriquant un pancréas bioartificiel vascularisé contenant des cellules bêta (i.e. les cellules sécrétant l’insuline). Ce dispositif permettrait de rendre aux personnes atteintes par le diabète de type 1 la capacité de sécréter par elles-mêmes de l’insuline et de réguler leur glycémie. La vascularisation est actuellement un enjeu de taille dans le domaine du génie tissulaire. La plupart des tissus incorporant des cellules générées par le génie tissulaire sont actuellement fortement limités en épaisseur faute d’être vascularisés adéquatement. Pour les tissus dont l’épaisseur dépasse 400 μm, la vascularisation est nécessaire à la survie de la plupart des cellules qui autrement souffriraient d’hypoxie, les empêchant ainsi d’accomplir leurs fonctions [1]. Ce mémoire présente le développement et la mise en service d’un dispositif d’extrusion tridimensionnelle de sucre vitrifié pour la vascularisation d’un pancréas bioartificiel. Ce dispositif a été développé au laboratoire de recherche sur les procédés d’impression 3D ainsi qu’au bureau de design du département de génie mécanique de l’Université Laval. Grâce à cette technique d’impression 3D novatrice et à la caractérisation du procédé, il est maintenant possible de produire rapidement et avec précision des structures temporaires en sucre vitrifié pour la fabrication de réseaux vasculaires tridimensionnels complexes. Les structures temporaires peuvent, après leur production, être utilisées pour réaliser le moulage rapide de constructions vascularisées avec des matériaux tels que du polydiméthylsiloxane (PDMS) ou des hydrogels chargés de cellules biologiques. De par la nature du matériel utilisé, les moules temporaires peuvent être facilement et rapidement dissous dans une solution aqueuse et laisser place à un réseau de canaux creux sans créer de rejets toxiques, ce qui représente un avantage majeur dans un contexte de bio-ingénierie.

Optimisation thermodynamique d’un procédé solaire utilisant un système de réfrigération à éjecto-compression pour la production du froid

L’objectif essentiel de cette thèse est de développer un système industriel de réfrigération ou de climatisation qui permet la conversion du potentiel de l’énergie solaire en production du froid. Ce système de réfrigération est basé sur la technologie de l’éjecto-compression qui propose la compression thermique comme alternative économique à la compression mécanique coûteuse. Le sous-système de réfrigération utilise un appareil statique fiable appelé éjecteur actionné seulement par la chaleur utile qui provient de l’énergie solaire. Il est combiné à une boucle solaire composée entre autres de capteurs solaires cylindro-paraboliques à concentration. Cette combinaison a pour objectif d’atteindre des efficacités énergétiques et exergétiques globales importantes. Le stockage thermique n’est pas considéré dans ce travail de thèse mais sera intégré au système dans des perspectives futures. En première étape, un nouveau modèle numérique et thermodynamique d’un éjecteur monophasique a été développé. Ce modèle de design applique les conditions d’entrée des fluides (pression, température et vitesse) et leur débit. Il suppose que le mélange se fait à pression constante et que l’écoulement est subsonique à l’entrée du diffuseur. Il utilise un fluide réel (R141b) et la pression de sortie est imposée. D’autre part, il intègre deux innovations importantes : il utilise l'efficacité polytropique constante (plutôt que des efficacités isentropiques constantes utilisées souvent dans la littérature) et n’impose pas une valeur fixe de l'efficacité du mélange, mais la détermine à partir des conditions d'écoulement calculées. L’efficacité polytropique constante est utilisée afin de quantifier les irréversibilités au cours des procédés d’accélérations et de décélération comme dans les turbomachines. La validation du modèle numérique de design a été effectuée à l’aide d’une étude expérimentale présente dans la littérature. La seconde étape a pour but de proposer un modèle numérique basé sur des données expérimentales de la littérature et compatible à TRNSYS et un autre modèle numérique EES destinés respectivement au capteur solaire cylindro-parabolique et au sous-système de réfrigération à éjecteur. En définitive et après avoir développé les modèles numériques et thermodynamiques, une autre étude a proposé un modèle pour le système de réfrigération solaire à éjecteur intégrant ceux de ses composantes. Plusieurs études paramétriques ont été entreprises afin d’évaluer les effets de certains paramètres (surchauffe du réfrigérant, débit calorifique du caloporteur et rayonnement solaire) sur sa performance. La méthodologie proposée est basée sur les lois de la thermodynamique classique et sur les relations de la thermodynamique aux dimensions finies. De nouvelles analyses exergétiques basées sur le concept de l’exergie de transit ont permis l'évaluation de deux indicateurs thermodynamiquement importants : l’exergie produite et l’exergie consommée dont le rapport exprime l’efficacité exergétique intrinsèque. Les résultats obtenus à partir des études appliquées à l’éjecteur et au système global montrent que le calcul traditionnel de l’efficacité exergétique selon Grassmann n’est désormais pas un critère pertinent pour l'évaluation de la performance thermodynamique des éjecteurs pour les systèmes de réfrigération.

Towards in silico IBV vaccine design: defining the role of polymorphism in viral attenuation

The gammacoronavirus, Infectious Bronchitis Virus (IBV), is a respiratory pathogen of chickens. IBV is a constant threat to poultry production as established vaccines are often ineffective against emerging strains. This requires constant and rapid vaccine production by a process of viral attenuation by egg passage, but the essential forces leading to attenuation in the virus have not yet been characterised. Knowledge of these factors will lead to the development of more effective, rationally attenuated, live vaccines and reduction of the mortality and morbidity caused by this pathogen. M41 CK strain was egg passaged four times many years ago at Houghton Poultry Research Station and stored as M41-CK EP4 (stock virus at The Pirbright Institute since 1992). It was the first egg passage to have its genome pyrosequenced and was therefore used as the baseline reference. The overall aim of this project was to analyse deep sequence data obtained from four IBV isolates (called A, A1, C and D) each originating from the common M41-CK EP4 (ep4) and independently passaged multiple times in embryonated chicken eggs (figure 1.1). Highly polymorphic encoding regions of the IBV genome were then identified which are likely involved in the attenuation process through the formation of independent SNPs and/or SNP clusters. This was then used to direct targeted investigation of SNPs during the attenuation process of the four IBV passages. A previously generated deep sequence dataset was used as a preliminary map of attenuation for one virulent strain of IBV. This investigation showed the nucleocapsid and spike as two highly polymorphic encoding regions within the IBV genome with the highest proportion of SNPs compared to encoding region size. This analysis then led to more focussed studies of the nucleocapsid and spike encoding region with the ultimate aim of mapping key attenuating regions and nucleotide positions. The 454 pyrosequencing data and further investigation of nucleocapsid and spike encoding regions have identified the SNPs present at the same nucleotide positions within analysed A, A1, C and D isolates. These SNPs probably play a crucial role in viral attenuation and universal vaccine production but it is not clear if independent SNPs are also involved in loss of virulence. The majority of SNPs accumulated at different nucleotide positions without further continuation in Sanger sequenced egg passages presenting S2 subunit (spike) and nucleocapsid as polymorphic encoding regions which in nature remain highly conserved.

Sensible use of primary energy in organic greenhouse production.

This document addresses the direct and indirect use of energy in European organic greenhouse horticulture (OGH) with the aim of reviewing available means for making it more environmental friendly and identifying knowledge gaps that should be addressed to attain this aim. The first observation is that there is no common regulation for energy use in OGH, which is not unexpected, since the need for climatisation is not uniformly distributed in the EU (and outside). Accordingly, the EU directive on organic agriculture does not set limitations on the use of energy, but rather promotes the responsible use of energy and of natural resources. The restrictions and rules of most private standards are slightly more stringent. Some standards have specific restrictions on the amount and sources of energy and/or on the seasonal use of energy for heating. Some standards also address processes that may affect (in)direct energy use, such as cultivation methods, mulching, lighting and growing media or substrates. However, most private standards have no or little restrictions or regulations on energy use. Accordingly, it should not surprise that very little quantitative information is available about energy use in OGH. In the present document we have filled the gaps with data with estimates drawn on energy use in conventional greenhouses. With respect to ongoing research, whereas many of the present research results about energy use and saving in conventional greenhouses are relevant (and also applied) in OGH, little research is devoted to address the energy use that is peculiar to OGH, particularly energy use for humidity control. In short, there are still a lot of knowledge gaps to improve quality and to lower energy use in organic greenhouses. The purpose of this document is a summary of present relevant knowledge about energy use and energy saving and of the perspective for improvement. In particular, the goal is to make an overview on the methods and technologies which can be used to reduce the energy use in OGH. We start from the assumption that methods and technologies that are used for reducing direct and indirect energy in conventional greenhouses can also be applied in organic greenhouses. Research on reducing energy use in conventional greenhouses is also more widely available because the area of conventional greenhouse horticulture is much larger than the area of OGH. When implementing these methods and techniques we should take into account the specific characteristics of organic agriculture like soil-based cultivation, use of organic fertilizers and the limited use of crop protection products. This document is organised as follows: first we report the results of a survey about energy use and relevant standards in the countries participating to the COST action (chapter 1); then we review the energy use for climatisation: heating (chapter 2) and humidity (chapter 3). In chapter 4 we review the available design and management means that would either reduce energy use and/or increase energy use efficiency by increasing productivity of OGH. In chapter 5 we present a short summary of existing information on indirect energy use, that is the energy required to manufacture production means (greenhouse structure and cover, fertilisers, equipment etc.) and for crop protection, particularly steaming, and briefly discuss possible savings. Finally (chapter 6) we review briefly the potential for application of renewable energy sources in OGH.

Rethinking Le Corbusier: Urban Design and History

It is generally assumed that Le Corbusier’s urban planning made a break with the past, and that the public spaces designed by him had nothing to do with anything that existed before – a conviction fostered by both the innovative character of his proposals and by the proliferation in his manifestos of watchwords that mask any evocation of the past – words like civilisation machiniste, l’esprit nouveau, l’architecture de demain. However, in his writings, Le Corbusier often mentioned the powerful analogy that exists between the architecture of other times and the logic of modern production. Vers une architecture, for example, contains a mixture of photographs showing silos, cars, aeroplanes, ships (i.e. the fruits of 19th and 20th century civil architecture and mechanical engineering) alongside photographs of Greek and Roman buildings. While Le Corbusier, at the end of the 1920s, claimed “I have only one teacher: the past; only one education: the study of the past”, a series of sketches in the first volume of the Œuvre complète, done during his youth at the archaeological sites visited during his Grand Tour, shows that his interest in the past went far beyond a simple reference.