Previsão de avarias em transformadores de potência através da análise de ensaios físico-químicos

Os Transformadores de potência são máquinas de elevada importância ao nível dos Sistemas Elétricos de Energia (SEE) uma vez que são estas máquinas que possibilitam a interligação dos diferentes níveis de tensão da rede e a transmissão de energia elétrica em Corrente Alternada (CA). Geralmente, estas máquinas são de grandes dimensões e de elevado nível de complexidade construtiva. Caracterizam-se por possuírem períodos de vida útil bastante elevados (vinte a trinta anos) e preços elevados, o que conduz a um nível de exigência de fiabilidade muito elevada, uma vez que não e viável a existência de muitos equipamentos de reserva nos SEE. Com o objetivo de tentar maximizar o período de vida útil dos transformadores de potência e a sua fiabilidade, tenta-se, cada vez mais, implementar conceitos de manutenção preventiva a este tipo de máquinas. No entanto, a gestão da sua vida útil e extremamente complexa na medida em que, estas máquinas têm vários componentes cruciais e suscetiveis de originar falhas e, quase todos eles, encontram-se no interior de uma cuba. Desta forma, não e possível obter uma imagem do seu estado, em tempo real, sem colocar o transformador fora de serviço, algo que acarreta custos elevados. Por este motivo, desenvolveu-se uma técnica que permite obter uma indicação do estado do transformador, em tempo real, sem o retirar de serviço, colhendo amostras do óleo isolante e procedendo a sua análise físico-química e Analise Gases Dissolvidos (DGA). As análises aos óleos isolantes tem vindo a adquirir uma preponderância muito elevada no diagnóstico de falhas e na analise do estado de conservação destes equipamentos tendo-se desenvolvido regras para interpretação dos parâmetros dos óleos com carácter normativo. Considerando o conhecimento relativo a interpretação dos ensaios físico-químicos e DGA ao oleol, e possível desenvolver ferramentas capazes de otimizar essas mesmas interpretações e aplicar esse conhecimento no sentido de prever a sua evolução, assim como o surgimento de possíveis falhas em transformadores, para assim otimizar os processos de manutenção. Neste campo as Redes Neuronais Artificiais (RNAs) têm um papel fundamental

Produção Fotovoltaica em Autoconsumo e Pequena Produção: Caso de Estudo do ISEP

A presente dissertação insere-se no âmbito da unidade curricular de “Dissertação/Projeto/Estágio”, do 2º ano do mestrado em Engenharia Eletrotécnica – Sistemas Elétricos de Energia. Com o crescente aumento do consumo energético a nível mundial, e consequente esgotamento dos recursos fósseis, surge a necessidade de procurar soluções alternativas para a produção de energia. As energias renováveis aparecem como uma solução sustentável na produção de eletricidade, pois a sua produção representa um menor custo. Este trabalho tem como principais objetivos o dimensionamento de uma central de produção fotovoltaica para o ISEP nos regimes de exploração em autoconsumo e pequena produção, tendo em conta o atual Decreto-Lei (DL) n.º 153/2014, e também a análise de viabilidade económica dessa mesma instalação. O sistema fotovoltaico usado no dimensionamento em autoconsumo e pequena produção foi realizado com recurso ao software PVsyst. Tendo em conta que os consumos do ISEP são bastante inferiores nos períodos de férias escolares e fins-de-semana, e também por haver uma limitação de área disponível para a colocação dos módulos fotovoltaicos, a melhor opção a adotar será um sistema fotovoltaico de 237 kWp, tanto para autoconsumo como para pequena produção. Outro objetivo é a realização de um estudo de viabilidade económica do sistema fotovoltaico dimensionado. Os resultados obtidos permitem então clarificar qual dos regimes de exploração é mais viável para o ISEP, sendo que esses resultados poderão servir de apoio a uma futura decisão, caso o ISEP decida instalar um sistema deste tipo.

Key-CRDT stores

Dissertação para obtenção do Grau de Mestre em Engenharia Informática

Análise comparativa das ações do tráfego rodoviário definidas em diversos regulamentos internacionais de pontes

O presente trabalho pretende avaliar as diferenças de efeitos que os modelos de sobrecarga rodoviária de dez regulamentos (RSA, EC1-2, NBR, AASHTO, SATCC, CSA, IRC:6, SNiP, Manual de Hong Kong, NCP) provocam em pontes rodoviárias de pequeno a médio vão. Numa primeira parte são cobertas questões relacionadas com os efeitos dinâmicos em pontes referenciando-se diversos estudos. Em seguida são apresentados os principais fatores que influenciam os efeitos das sobrecargas rodoviárias. Os modelos de sobrecarga rodoviária, definidos nos diversos regulamentos, são descritos pormenorizadamente com o objetivo de clarificar e facilitar a sua aplicação. No que se refere à componente numérica do trabalho, a quantificação dos efeitos que cada modelo origina foi realizada através da modelação em elementos finitos de tabuleiros de comprimento variável entre 10 e 40 metros. Longitudinalmente analisaram-se os valores máximos do momento fletor e do esforço transverso, e numa análise transversal estudaram-se os valores máximos de momentos fletores positivos e negativos originados em cada tabuleiro. No capítulo 7 é realizada uma análise comparativa dos efeitos causados pelos modelos de sobrecarga rodoviária definidos em cada regulamento tomando como referência os valores obtidos pelo RSA.

American Society of Anesthesiologists Score: Still Useful After 60 Years? Results of the EuSOS Study

OBJECTIVE: The European Surgical Outcomes Study described mortality following in-patient surgery. Several factors were identified that were able to predict poor outcomes in a multivariate analysis. These included age, procedure urgency, severity and type and the American Association of Anaesthesia score. This study describes in greater detail the relationship between the American Association of Anaesthesia score and postoperative mortality. METHODS: Patients in this 7-day cohort study were enrolled in April 2011. Consecutive patients aged 16 years and older undergoing inpatient non-cardiac surgery with a recorded American Association of Anaesthesia score in 498 hospitals across 28 European nations were included and followed up for a maximum of 60 days. The primary endpoint was in-hospital mortality. Decision tree analysis with the CHAID (SPSS) system was used to delineate nodes associated with mortality. RESULTS: The study enrolled 46,539 patients. Due to missing values, 873 patients were excluded, resulting in the analysis of 45,666 patients. Increasing American Association of Anaesthesia scores were associated with increased admission rates to intensive care and higher mortality rates. Despite a progressive relationship with mortality, discrimination was poor, with an area under the ROC curve of 0.658 (95% CI 0.642 - 0.6775). Using regression trees (CHAID), we identified four discrete American Association of Anaesthesia nodes associated with mortality, with American Association of Anaesthesia 1 and American Association of Anaesthesia 2 compressed into the same node. CONCLUSION: The American Association of Anaesthesia score can be used to determine higher risk groups of surgical patients, but clinicians cannot use the score to discriminate between grades 1 and 2. Overall, the discriminatory power of the model was less than acceptable for widespread use.

Assessing Cybersecurity service quality in corporate environments

This study assess the quality of Cybersecurity as a service provided by IT department in corporate network and provides analysis about the service quality impact on the user, seen as a consumer of the service, and on the organization as well. In order to evaluate the quality of this service, multi-item instrument “SERVQUAL” was used for measuring consumer perceptions of service quality. To provide insights about Cybersecurity service quality impact, DeLone and McLean information systems success model was used. To test this approach, data was collected from over one hundred users from different industries and partial least square (PLS) was used to estimate the research model. This study found that SERVQUAL is adequate to assess Cybersecurity service quality and also found that Cybersecurity service quality positively influences the Cybersecurity use and individual impact in Cybersecurity.

Instal·lació d'energia fotovoltaica d'una casa de colònies

Els objectius d'aquest projecte són el disseny d'una instal·lació fotovoltaica connectada a xarxa que sigui capaç de produir la mateixa quantitat d’energia que consumeix la casa de colònies a on es troba ubicada. La particularitat d’aquesta instal·lació serà que els generadors fotovoltaics aniran sobra una plataforma giratòria que seguirà el sol buscant sempre la millor i major producció energètica. El control d'aquesta estructura anirà a càrrec d'un autòmat programable. Aprofitant l'existència de panells fotovoltaics, s'ha dissenyat un sistema d’acumulació d’energia de 2 kW de potència que dotarà de corrent una línia que, en cas de falla en el sistema d’alimentació general, es mantindrà ininterrompuda. Aquesta línia serà de 230 V i està dissenyada per tenir una autonomia de 2 hores

Improving the prediction of plant species distribution and community composition by adding edaphic to topo-climatic variables

Questions Soil properties have been widely shown to influence plant growth and distribution. However, the degree to which edaphic variables can improve models based on topo-climatic variables is still unclear. In this study, we tested the roles of seven edaphic variables, namely (1) pH; (2) the content of nitrogen and of (3) phosphorus; (4) silt; (5) sand; (6) clay and (7) carbon-to-nitrogen ratio, as predictors of species distribution models in an edaphically heterogeneous landscape. We also tested how the respective influence of these variables in the models is linked to different ecological and functional species characteristics. Location The Western Alps, Switzerland. Methods With four different modelling techniques, we built models for 115 plant species using topo-climatic variables alone and then topo-climatic variables plus each of the seven edaphic variables, one at a time. We evaluated the contribution of each edaphic variable by assessing the change in predictive power of the model. In a second step, we evaluated the importance of the two edaphic variables that yielded the largest increase in predictive power in one final set of models for each species. Third, we explored the change in predictive power and the importance of variables across plant functional groups. Finally, we assessed the influence of the edaphic predictors on the prediction of community composition by stacking the models for all species and comparing the predicted communities with the observed community. Results Among the set of edaphic variables studied, pH and nitrogen content showed the highest contributions to improvement of the predictive power of the models, as well as the predictions of community composition. When considering all topo-climatic and edaphic variables together, pH was the second most important variable after degree-days. The changes in model results caused by edaphic predictors were dependent on species characteristics. The predictions for the species that have a low specific leaf area, and acidophilic preferences, tolerating low soil pH and high humus content, showed the largest improvement by the addition of pH and nitrogen in the model. Conclusions pH was an important predictor variable for explaining species distribution and community composition of the mountain plants considered in our study. pH allowed more precise predictions for acidophilic species. This variable should not be neglected in the construction of species distribution models in areas with contrasting edaphic conditions.

Nanoparticles in SiH4-Ar plasma: Modelling and comparison with experimental data

Experimental and theoretical investigations for growth of silicon nanoparticles (4 to 14 nm) in radio frequency discharge were carried out. Growth processes were performed with gas mixtures of SiH4 and Ar in a plasma chemical reactor at low pressure. A distinctive feature of presented kinetic model of generation and growth of nanoparticles (compared to our earlier model) is its ability to investigate small"critical" dimensions of clusters, determining the rate of particle production and taking into account the influence of SiH2 and Si2Hm dimer radicals. The experiments in the present study were extended to high pressure (≥20 Pa) and discharge power (≥40 W). Model calculations were compared to experimental measurements, investigating the dimension of silicon nanoparticles as a function of time, discharge power, gas mixture, total pressure, and gas flow.

Curriculum Vitae Normalizado. Jornada técnica sobre CRIS y repositorios

Izascun Lacunza y David Arellano, FECYT, presentaron el proyecto CVN para la creación de un modelo normalizado de CV de investigador a partir de los datos almacenados en los sistemas CRIS institucionales. El modelo CVN se encuentra en la actualidad implementado en 32 universidades españolas, dando servicio a más de 18.500 investigadores de dichas instituciones, lo que supone un 14% del total de investigadores del Sistema Español de Ciencia y Tecnología (SECT), y hay planes para extender su implantación a más universidades y a más personal científico en aquéllas en las que ya está en marcha.

Maximizing Benefits in Information Technology Outsourcing

Information Technology (IT) outsourcing has traditionally been seen as a means to acquire newresources and competencies to perform standard tasks at lowered cost. This dissertationchallenges the thought that outsourcing should be limited to non-strategic systems andcomponents, and presents ways to maximize outsourcing enabled benefits while minimizingassociated risks. In this dissertation IT outsourcing is approached as an efficiency improvement and valuecreationprocess rather than a sourcing decision. The study focuses on when and how tooutsource information technology, and presents a new set of critical success factors foroutsourcing project management. In a case study it re-validates the theory-based propositionthat in certain cases and situations it is beneficial to partly outsource also strategic IT systems. The main contribution of this dissertation is the validation of proposal that in companies wherethe level of IT competency is high, managerial support established and planning processes welldefined,it is possible to safely outsource also business critical IT systems. A model describing the critical success factors in such cases is presented based on existing knowledge on the fieldand the results of empirical study. This model further highlights the essence of aligning IT andbusiness strategies, assuming long-term focus on partnering, and the overall target ofoutsourcing to add to the strengths of the company rather than eliminating weaknesses.

Success Factors of an Enterprise Resource Planning System

Työn tarkoituksena oli tutkia yrityksen eri yksiköiden toiminnaohjausjärjestelmiä sekä verrata niiden menestystekijöitä Adelakunin malliin tietojärjestelmien laatuulottuvuuksista. Siinä järjestelmän kokonaislaatu jaetaan liiketoiminnalliseen, tekniseen ja käyttäjän kokemaan laatuun. Tulosten perusteella oli myös tavoitteena kehittää kyseisen toiminnanojausjärjestelmän kehittämistä varten malli onnistumistekijöiden keskinäisestä riippuvuudesta. Tutkittavista järjestelmistä ja niiden käytöstä kerättiin tietoja käyttöönottoprojektien dokumentaatiosta, haastatteluin, kyselylomakkein ja järjestelmäanalyysein. Sekä loppukäyttäjät että yritysjohto olivat kyselyjen ja haastattelujen kohderyhmänä. Saatuja tietoja arvioitiin Adelakunin kolmiulotteisen tietojärjestelmän laatutekijämallin mukaisesti ja keskeisiä menestystekijöitä etsittiin. Tutkituissa tapauksissa tietojärjestelmien menestyksen taustalta löytyi alan kirjallisuuden kanssa yhtäpitäviä tekijöitä. Myös Adelakunin laatu-ulottuvuusmalli osoittautui validiksi tutkituissa tapauksissa. Keskeisten menestystekijöiden välisistä vuorovaikutussuhteista rakennettiin malli, jota voidaan hyödyntää kyseisen järjestelmän jatkokehityksessä.

CFD simulation of complex phenomena containing suspensions and flow throughporous media

There is an increasing reliance on computers to solve complex engineering problems. This is because computers, in addition to supporting the development and implementation of adequate and clear models, can especially minimize the financial support required. The ability of computers to perform complex calculations at high speed has enabled the creation of highly complex systems to model real-world phenomena. The complexity of the fluid dynamics problem makes it difficult or impossible to solve equations of an object in a flow exactly. Approximate solutions can be obtained by construction and measurement of prototypes placed in a flow, or by use of a numerical simulation. Since usage of prototypes can be prohibitively time-consuming and expensive, many have turned to simulations to provide insight during the engineering process. In this case the simulation setup and parameters can be altered much more easily than one could with a real-world experiment. The objective of this research work is to develop numerical models for different suspensions (fiber suspensions, blood flow through microvessels and branching geometries, and magnetic fluids), and also fluid flow through porous media. The models will have merit as a scientific tool and will also have practical application in industries. Most of the numerical simulations were done by the commercial software, Fluent, and user defined functions were added to apply a multiscale method and magnetic field. The results from simulation of fiber suspension can elucidate the physics behind the break up of a fiber floc, opening the possibility for developing a meaningful numerical model of the fiber flow. The simulation of blood movement from an arteriole through a venule via a capillary showed that the model based on VOF can successfully predict the deformation and flow of RBCs in an arteriole. Furthermore, the result corresponds to the experimental observation illustrates that the RBC is deformed during the movement. The concluding remarks presented, provide a correct methodology and a mathematical and numerical framework for the simulation of blood flows in branching. Analysis of ferrofluids simulations indicate that the magnetic Soret effect can be even higher than the conventional one and its strength depends on the strength of magnetic field, confirmed experimentally by Völker and Odenbach. It was also shown that when a magnetic field is perpendicular to the temperature gradient, there will be additional increase in the heat transfer compared to the cases where the magnetic field is parallel to the temperature gradient. In addition, the statistical evaluation (Taguchi technique) on magnetic fluids showed that the temperature and initial concentration of the magnetic phase exert the maximum and minimum contribution to the thermodiffusion, respectively. In the simulation of flow through porous media, dimensionless pressure drop was studied at different Reynolds numbers, based on pore permeability and interstitial fluid velocity. The obtained results agreed well with the correlation of Macdonald et al. (1979) for the range of actual flow Reynolds studied. Furthermore, calculated results for the dispersion coefficients in the cylinder geometry were found to be in agreement with those of Seymour and Callaghan.

Celulas solares y sistemas fotovoltaicos. Manual de prácticas

Manual de prácticas de la asignatura optativa

Characterization and quantification of polyradical character

The decomposition of 〈͈Ŝ²〉 into atomic and diatomic contributions (local spin analysis) is used to detect and quantify the polyradical character of molecular systems. A model triradical system is studied in detail, and the local spin analysis is used to distinguish several patterns of local spin distributions and spin-spin interactions that can be found for different electronic states. How close a real molecular system is to an ideal system of k perfectly localized spin centers is utilized to define a measure of its k-radical character. The spin properties and triradical character of the lowest-lying electronic states of a number of all σ, all π, and σ-π organic triradicals are discussed in detail. The local spin contributions exhibit good correlation with experimental triradical stabilization energies