Lightweight, liquid-cooled, direct-drive generator for highpower wind turbines: motivation, concept, and performance

Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.

Tandem-MAG-welding of high strength steels for shipbuilding applications

Tämän työn tavoitteena oli hitsata tandem MAG –laitteistolla 25 mm paksua Ruukin E500 TMCP terästä. Työssä oli tarkoituksena vähentää railotilavuutta mahdollisimman paljon sekä suorittaa testihitsaukset 0.8 kJ/mm sekä 2.5 kJ/mm lämmöntuonneilla. Teoriaosuudessa käsiteltiin Tandem MAG-hitsaukseen, sen tuottavuuteen ja laatukysymyksiin liittyviä asioita sekä siinä perehdyttiin suurlujuusteräksien käyttöön hitsauksessa sekä laivanrakennuksessa. Kokeellisessa osuudessa perehdyttiin hitsauksessa huomattuihin etuihin, ongelmiin sekä ongelmien ratkaisumahdollisuuksiin. Hitsausliitoksen mekaaniset ominaisuudet tutkittiin rikkomattomin sekä rikkovin menetelmin. Alustavat hitsausohjeet luotiin kummallekin lämmöntuonnille. Testaukset aloitettiin 30 º railokulmalla pienentäen kulmaa mahdollisuuksien mukaan. Testauksissa ei saatu hitsattua onnistuneesti alle 30 º railokulmalla. Hitsaustestien aikana huomattiin magneettisen puhalluksen vaikutus hitsaustapahtumaan. Kaasunvirtausnopeuden tuli olla tietyn suuruinen jotta palkokerrokset onnistuivat ilman huokoisuusongelmaa. Pienemmällä lämmöntuonnilla hitsattaessa kaasunvirtausnopeudet olivat tärkeämpiä hitsatessa ylempiä palkokerroksia. Kääntämällä hitsauspoltinta sivuttaissuunnassa 7-10 astetta auttoi ehkäisemään reunahaavan syntymistä. Rikkovista menetelmistä testitulokset olivat hyväksyttyjä kaikkien muiden paitsi päittäishitsin sivutaivutuskokeen osalta.

Thick Section Laser Beam Welding of Structural Steels: Methods for Improving Welding Efficiency

Laser beam welding (LBW) is applicable for a wide range of industrial sectors and has a history of fifty years. However, it is considered an unusual method with applications typically limited to welding of thin sheet metal. With a new generation of high power lasers there has been a renewed interest in thick section LBW (also known as keyhole laser welding). There was a growing body of publications during 2001-2011 that indicates an increasing interest in laser welding for many industrial applications, and in last ten years, an increasing number of studies have examined the ways to increase the efficiency of the process. Expanding the thickness range and efficiency of LBW makes the process a possibility for industrial applications dealing with thick metal welding: shipbuilding, offshore structures, pipelines, power plants and other industries. The advantages provided by LBW, such as high process speed, high productivity, and low heat input, may revolutionize these industries and significantly reduce the process costs. The research to date has focused on either increasing the efficiency via optimizing process parameters, or on the process fundamentals, rather than on process and workpiece modifications. The argument of this thesis is that the efficiency of the laser beam process can be increased in a straightforward way in the workshop conditions. Throughout this dissertation, the term “efficiency” is used to refer to welding process efficiency, specifically, an increase in efficiency refers an increase in weld’s penetration depth without increasing laser power level or decreasing welding speed. These methods are: modifications of the workpiece – edge surface roughness and air gap between the joining plates; modification of the ambient conditions – local reduction of the pressure in the welding zone; modification of the welding process – preheating of the welding zone. Approaches to improve the efficiency are analyzed and compared both separately and combined. These experimentally proven methods confirm previous findings and contribute additional evidence which expand the opportunities for laser beam welding applications. The focus of this research was primarily on the effects of edge surface roughness preparation and pre-set air gap between the plates on weld quality and penetration depth. To date, there has been no reliable evidence that such modifications of the workpiece give a positive effect on the welding efficiency. Other methods were tested in combination with the two methods mentioned above. The most promising - combining with reduced pressure method - resulted in at least 100% increase in efficiency. The results of this thesis support the idea that joining those methods in one modified process will provide the modern engineering with a sufficient tool for many novel applications with potential benefits to a range of industries.

Ulkoistettujen IT-palveluiden laatu eri offshoring asteissa

Suomen IT-palvelu markkinoiden voidaan kuvata olevan murroksessa. Asiakkaat ovat yhä kiinnostuneempia ulkomailla tuotetuista palveluista, mutta tietyt tekijät pitävät heidät varuillaan. Tietoa ei ole tarpeeksi sataavilla siitä, miten eri offshoring asteet vaikuttavat palvelun laatuun. Vaikka palvelun laatua ja ulkomailla tuotettuja palveluita on tutkittu paljon, usea tutkimuskysymys on edelleen vastaamatta, terminologia on epämääräistä ja tutkimustulokset ovat epäjohdonmukaisia. Tämä tutkimus keskittyy näiden kahden kentän leikkauspisteeseen. Tutkimuksen tarkoitus on oppia lisää palvelun laadusta eri offshoring asteissa ja samalla kaventaa tutkimusaukkoa. Offshoring asteet voidaan jakaa kolmeen toimitusmalliin: onshore, yhteistyö ja offshore. Tutkimus koostuu kvantitatiivisesta sekä kvalitatiivisesta vaiheesta. Ensin kerättiin numeerista aineistoa tapahtumienhallintajärjestelmästä (incident management system). Ratkaisuaikaa eri tomitusmalleissa analysoitiin Kruskal-Wallis ja Jonckheere-Terpstra testien avulla. Lisäksi palvelutasosopimuksen (SLA) noudattamista eri toimitusmalleissa tutkittiin ristiintaulukoinnilla. Kvantitatiivisen analyysin tulokset viittaavat siihen, että offshore palvelut suoriutuvat muita toimitusmalleja paremmin, kun palvelun laatua tarkastellaan nopeuden ja SLA:n näkökulmasta. Analysoitua dataa varjostavat kuitenkin useat ongelmat, jonka takia tutkimustuloksiin täytyy suhtautua varoen. Kvantitatiivisen analyysin jälkeen tutkimus siirtyi kvalitatiivisen datan keräämiseen ja analysoimiseen. Haasteteltavia oli neljä ja he tulivat erilaisista organisatorisista rooleista ja heillä oli kokemuksia erilaisista toimitusmalleista. Haastattelut kattoivat seuraavat teemat: laatu käsitteenä, laadun subjektiivisuus tai objektiivisuus, offshore toimituksiin kohdistuvat odotukset ja ennakkoluulot, Intiasta toimitettu laatu, offshore resurssien proaktiivisuus, laatuindikaattorit sekä yhteistyössä toimitettujen palveluiden vähäisyys. Useita johtopäätöksiä voidaan vetää empiirisen tutkimuksen perusteella. Ensinnäkin palvelun laatu eri toimitusmalleissa nähtiin kiistanalaisena aiheena. Toisekseen tapa jolla resurssit ja työtehtävät jaettiin yhteistyössä toimitetussa palvelussa, näytti aiheuttavan joitain ongelmia. Toisaalta kokemattomat offshore resurssit osoitettiin näihin palveluihin ja toisaalta heille annetaan vain rutiinitehtäviä. Tämä luo itseään voimistavan kierteen, joka johtaa alhaiseen motivaatioon ja omistajuuteen sekä korkeaan vaihtuvuuteen offshore resurssien keskuudessa. Tämä piirre ei kuitenkaan ole ominainen juuri yhteistyössä toimitetuille palveluille vaan perimmäinen syy piilee tavassa jakaa resurssit ja tehtävät. Lisäksi tutkimuksessa tunnistettiin, että ennakkoluulot vaikuttavat koettuun palvelun laatuun ennakoimattomalla tavalla. Tutkimus myös vahvisti, että kohdeyrityksessä on tarvetta lisäinformation keräämiselle, jotta lisäanalyysejä voidaan tehdä.

Quality of outsourced IT services in different degrees of offshoring

The Finnish IT service market can be described to be at a turning point. The clients are ever more interested on services delivered from offshore but certain issues keep them cautious. There is a lack of knowledge on what implications different degrees of offshoring have on service quality. Although there has been significant amount of research related to both service quality and offshoring, several questions are unanswered, terminology remains ambivalent and research findings are inconsistent. The study focuses on the interception of these two fields. The purpose of the study is to learn more about service quality in different degrees of offshoring. At the same time it aims to contribute in narrowing the research gaps. The degree of offshoring can be divided to three delivery modes: onshore, collaboration and offshore. The study takes a mixed method approach where the quantitative and qualitative phases are executed sequentially. First data was gathered from incident management system. Resolution time in different degrees of offshoring was analyzed with Kruskal-Wallis and Jonckheere-Terpstra tests. In addition, the compliance to Service Level Agreement (SLA) in different degrees of offshoring was examined with cross tabulation. The findings from the quantitative analysis suggested that the services with offshore delivery mode perform the best in terms of promptness and SLA compliance. However, several issues were found related to the data and for that reason, the findings should be considered with prudence. After the quantitative analysis, the study moved on to qualitative data collection and analysis. Four semi-structured interviews were held. The interviewees represented different organizational roles and had experiences from different delivery modes. Several themes were covered in the interviews, including: the concept of quality, the subjectivity or objectivity of service quality, expectations and prejudices towards offshore deliveries, quality produced in India, proactiveness of offshore resources, quality indicators and the scarcity of collaborative deliveries. Several conclusions can be made from the empirical research. Firstly, the quality in different delivery modes was found to be controversial topic. Secondly, in the collaborative delivery covered in the study, the way tasks and resources are allocated seem to cause issues. On the other hand inexperienced offshore resources are assigned to the delivery and on the other hand only routine tasks are assigned to the resources. This creates a self-enforcing loop that results in low motivation, low ownership and high employee turnover in offshore. Nevertheless, this issue is not characteristic only to collaborative deliveries but rather allocation of tasks and resources. Moreover, prejudices were identified to affect the perceived service quality in non-predictable way. The research also demonstrated that there is a need in focal company for further data gathering and analysis.

Chronic macro-economic and financial imbalances in the world economy: a meta-economic view

Global finance, combining offshore banking and universal banks to drive a broader globalization process, has transformed the modus operandi of the world economy. This requires a new "meta-economic" framework in which short-term portfolio-investment flows are treated as the dominant phenomenon they have become. Organized by global finance, these layered bi-directional flows between center and periphery manage a tension between financial concentration and monetary fragmentation. The resulting imbalances express the asymmetries built into that tension and render the exchange rate a more strategic policy variable than ever.

Globalization of pharmaceutical R&D. Pharmaceutical R&D governance forms in People's Republic of China

Yrityksen selviytyminen ja menestyminen ovat riippuvaisia sen kyvystä innovoida, luoda tietoa ja hyödyntää tietämystä ja keksintöjä (Dunk ja Kilgore 2001). Yrityksen menestyminen erityisesti korkean teknologian alalla on siten suoraan riippuvainen sen T&T:stä, johon tehdyt investoinnit tuovat merkittäviä taloudellisia etuja yritykselle uusien tuotteiden, palveluiden ja prosessien muodossa (McEvily ja Chakravarthy 1999). Teknologinen etumatka ja sen tuotteistaminen innovatiivisiksi tarjoamiksi mahdollistaa monopolististen etujen saavuttamisen yrityksen kansainvälisessä kilpailussa (Lall 1977). Tämä kaltainen kilpailuetu voidaan saavuttaa yrityksen kyvyllä yhdistää maantieteellisesti hajautettu T&T:nsä tehokkaaksi verkostoksi (Porter 1986). Boehen (2008) mukaan T&T:n globalisoitumista voidaan johtaa eri hallintömuodoilla: T&T:n kansainvälistymisellä, T&T:n ulkomaille sijoittamisella ja T&T ulkomaille ulkoistamisella. T&T:n globalisoituminen on osa 2000-luvun taloudellista muutosta, ja sille on esitetty useita vaikuttavia tekijöitä, kuten kustannuserot, työvoimaresurssit, erityisosaamiskeskukset, paikallinen teknologia osaaminen ja kohdemarkkinoiden potentiaali (bardhan 2006; Norwood, ym. 2006; von Zedtwitz ja Gassmann 2002). Tutkimuksen on osoitettu eroavan tuotekehityksestä ja eri tekijöiden on osoitettu vaikuttavan niihin (von Zedtwitz ja Gassmann 2002; Leifer ja Triscari 1987). Samoin T&T on osoitettu olevan jatkumo perustavanlaatuisesta soveltavaan ja lääkekehityksen muodostavan vastaavan T&T jatkumon (Lall 1980; Iansiti 1993), jonka yksittäiset osat vaikuttavat sen hallintomuotoon. Tutkimus esittää eri tekijöitä voivan hyödyntää hallintomuodosta riippuen. Tätä tutkimusta varten tutkija haastatteli lääketeollisuuden johtajia Kiinassa vahvistaakseen tai hylätäkseen eri tekijöitä ja niiden suhdetta lääketeollisen T&T:n hallintomuotoihin. Markkinoiden todettiin olevan ensisijainen tekijä mutta myös kustannuserojen, insentiivien, työvoimaresurssien ja erityisosaamiskeskusten merkitys T&T:n globalisoitumiseen vaikuttavina tekijöinä vahvistettiin yhdessä perusvaatimusten ja riskitekijöiden kanssa. Tutkimuksessa vahvistetaan myös lääketeollisen T&T-jatkumon vaikutus ja esitetään viitekehys hallintomuodoille.

Globalization of pharmaceutical R&D Pharmaceutical R&D governance forms in People's Republic of China

Firm's survival and success, which are dependent on its ability to innovate, to create knowledge and to capitalize on inventions and know-how, is in essence directly linked to its R&D process (Dunk and Kilgore 2001). Especially in technology driven industries, such as the pharmaceuticals, there are significant positive returns to R&D investments through introduction of new or improved products and services (McEvily and Chakravarthy 1999). Technological lead and its transformation to innovative products as fruits of corporate R&D can be seen as monopolistic advantage that helps enterprises to compete in today’s market (Lall 1977). This competitive advantage can be derived from corporation's ability to integrate its activities across geographic locations (Porter 1986). According to Boehe (2008) globalization of R&D can executed with different governance forms: R&D internationalization, R&D offshoring or R&D offshore outsourcing. Globalization of R&D is intervened with the changes in global economy of the 21st century. Some studies argue for its influencing factors to be access to vast skilled labor pools and centers of excellence (Bardhan 2006). Other studies indicate the R&D cost differentials between countries to be the major expected benefit (Norwood et al. 2006). Von Zedtwitz and Gassmann (2002) presented benefits as divided to accessing markets and customers or to accessing local science and technology. This study proposes that based on governance form distinct factor derived benefits can be capitalized. To corroborate or refute factors and their relations on R&D globalization governance forms, an empirical study based on expert interviews of pharmaceutical directors was conducted in the People's Republic of China. The market was found to be the major influencing factor. Local requirements and adaptation were corroborated as factors connected with markets. Furthermore, influencing factors, such as labour, centers of excellence, cost, financial incentives were corroborated together with conditional and risk factors. Furthermore this research argues that the globalization of pharmaceutical R&D is dependent on the financial, scientific and operational requirements of the drug discovery stage. And thus establishes the influence of drug discovery's stages continuum on pharmaceutical R&D globalization. Finally, a R&D globalization governance form decision framework is proposed based on the frameworks presented in literature and author's corroborated empirical findings.

Understanding round-tripping phenomenon in Russian context – case Cyprus

Russian FDI has a few peculiarities. One of them is round-tripping. Round-tripping is defined as transfer of funds abroad, usually to offshore financial centers (OFCs), and then bringing all or some of the investment back as foreign investment. Russian context was chosen for this study because the share of round-tripping investments from country’s total FDI is extensive. However, it needs to be addressed that this is not just a Russian phenomenon. Round-tripping is used by many developed and developing countries, and most of the countries have their own designated destinations for this kind of capital, much like Cyprus is the main destination for Russian capital. It is important to study this phenomenon further, since it falsifies FDI statistics and can lead to poor decisions on state level. Theoretical part of the study tries to determine weather traditional FDI and internationalization theories fit to explain the Russian round-tripping phenomenon. Traditional FDI and internationalization theories are first introduced in general terms, and then further examined in Russian context. In traditional endogenic FDI theories, when the capital is formed in one country it goes abroad to find better profits. At a first glance, this seemed not to be the case in round-tripping. However, during the study it became rather clear that with few adjustments and changes in perspective, traditional theories could be used to explain round-tripping phenomenon. For example, OLI paradigm can be further developed into OLIH paradigm with ‘H’ representing the important home country institutions. Transaction based view and resource seeking theories were also seen well equipped to explain round-tripping with a change in perspective. The latter part of the study focused on holistic understanding of Russian –Cyprian investment relationship. Study aims to shed light into the determinants and consequences of this phenomenon for both countries involved. The two share historical, cultural and political ties, but most importantly common financial interests. Russian companies seek security and financial knowledge to maneuver their assets and Cyprian economy largely is dependent on their disproportionally large financial sector. Consequences for Cyprian economy were seen in current economic crisis, when the need for their financial services diminished. Russian government on the other hand is losing vast amounts of tax money due to this phenomenon. A rather extreme view was also introduced in this study. Round-tripping phenomenon and OFCs are an important reason why corruption exists, since if one does not have a way to make ill-gained money legitimate why try to ill-gain the money at the first place. The most important finding of the study is that round-tripping companies are in a better competitive position than genuine and purely domestic investor due to their institutional knowledge.

Offshoring and outsourcing under demand uncertainty -a supply chain management analysis

Outsourcing and offshoring or any combinations of these have not just become a popular phenomenon, but are viewed as one of the most important management strategies due to the new possibilities from globalization. They have been seen as a possibility to save costs and improve customer service. Executing offshoring and offshore outsourcing successfully can be more complex than initially expected. Potential cost savings resulting from of offshoring and offshore outsourcing are often based on lower manufacturing costs. However, these benefits might be conflicted by a more complex supply chain with service level challenges that can respectively increase costs. Therefore analyzing the total cost effects of offshoring and outsourcing is necessary. The aim of this Master´s Thesis was to to construct a total cost model using academic literature to calculate the total costs and analyze the reasonability of offshoring and offshore outsourcing production of a case company compared to insourcing production. The research data was mainly quantitative and collected mainly from the case company past sales and production records. In addition management level interviews from the case company were conducted. The information from these interviews was used for the qualification of the necessary quantitative data and adding supportive information that could not be gathered from the quantitative data. Both data collection and analysis were guided by a theoretical frame of reference that was based on academic literature concerning offshoring and outsourcing, statistical calculation of demand and total costs. The results confirm the theories that offshoring and offshore outsourcing would reduce total costs as both offshoring and offshore outsourcing options result in lower total annual costs than insourcing mainly due to lower manufacturing costs. However, increased demand uncertainty would make the alternative of offshore outsourcing more risky and difficult to manage. Therefore when assessing the overall impact of the alternatives, offshoring is the most preferable option. As the main cost savings in offshore outsourcing came from lower manufacturing costs, more specifically labour costs, the logistics costs in this case company did not have an essential effect in total costs. The management should therefore pay attention initially to manufacturing costs and then logistics costs when choosing the best production sourcing option for the company.

Mapa sedes Bogotá

Gestión del conocimiento

Ingresos propios de ciudades metropolitanas

Gobernanza

Foraging ecology and parental behaviour in the common tern (Sterna hirundo)

One component of successful parenting is related to efficiency in foraging behaviour. The relationships among chick feeding, the size and type of food package, and length of parental foraging trips has not been well studied in seabirds. In addition, relatively few data have been collected on the activities of seabirds when foraging away from the nest site. The objectives of this study were: (1) to contrast productivity, feeding rate, and attendance patterns of individuals carrying a novel transmitter with a control group of birds; (2) to use radio-telemetry to assess the variability in foraging locations within and between individual male Common Terns; (3) to determine the seasonal variation in chick diet; (4) to determine for each transmittered bird, the relationships among the foraging patterns, parental behaviour, and seasonal reproductive success. The study took place over two years (1990-91) on a concrete breakwater 1 km offshore on Lake Erie near Port Colbome, Ontario. Ten pairs of terns in 1990 and 12 pairs in 1991 were radio-tracked by boat or car during the chick rearing stage. Concurrent behavioural observations documented the time each sex spent foraging or at the nest. The frequency and prey species composition of feeds to chicks were also recorded. The transmitters had negligible effects on the feeding frequency and brood attendance patterns of transmitter carrying birds. Peak nesting transmittered birds in 1990 and 1991 exhibited some inter-individual variability in foraging locations, however intraindividual variability was low. Birds foraged primarily to the west and northwest of the colony. Late nesters exhibited greater inter-individual variability, however intra-individual variability remained low for most birds. Neither group demonstrated sufficient variability to support the regular use of this colony as an "information centre". Individual transmittered birds had unique and predictable foraging patterns, and corresponding differences in feeding frequencies and brood attendance patterns, yet productivity was essentially equal between nests due to the impact and importance of stochastic events. Individuals that were recaptured in 1991 exhibited very similar foraging patterns to 1990, suggesting littie variability between years. Conservation of foraging patterns between years may have potential implications for mate choice decisions in future breeding seasons. Prey species delivered to chicks differed between morning and evening for peak and late nesters in 1990, but not 1991. Peak nesters in 1990 fed significantiy more Rainbow Smelt fOsmerus mordM) than Emerald Shiner (Notropis atherinoidesV this trend was reversed for late nesters who also fed large numbers of unidentified larval fish. No significant differences were found in 1991. Seasonal changes in prey species delivered to chicks is believed to be attributable to the temperature tolerances of the smelt and shiners, and the presence of large schools of larval fish during the late nesting season.

Sedimentology and stratigraphy of the Lower Silurian Grimsby formation, in subsurface, Lake Erie and Southwestern Ontario

Since the first offshore Lake Erie well was drilled in 1941, the Grimsby and Thorold formations of the Cataract Group have been economically important to the oil and gas industry of Ontario. The Cataract Group provides a significant amount of Ontario's gas production primarily from wells located on Lake Erie. The Grimsby - Thorold formations are the result of nearshore estuarine processes influenced by tides on a prograding shelf and are composed of subtidal channel complexes, discrete tidal channels, mud flats and non-marine deposits. Deposition was related to a regressive - transgressive cycle associated with eustatic sea level changes caused by the melting and resurgence of continental glaciation centred in Africa in the Late Ordovician/Early Silurian. Grimsby deposition began during a regression with the deposition of subtidal channel complexes incised into the marine deposits of the Cabot Head Formation. The presence of mud drapes and mud couplets suggest that these deposits were influenced by tides. These deposits dominate the lower half of the Grimsby. Deposition continued with a change from these subtidal channel complexes to laterally migrating, discrete, shallow tidal channels and mud flats. These were in turn overlain by the non-marine deposits of the Thorold Formation. Grimsby - Thorold deposition ended with a major transgression replacing siliciclastic deposition with primarily carbonate deposition. Sediment was sourced from the east and southeast and associated with a continuation of the Taconic Orogeny into the Early Silurian. The fluvial head of the estuary prograded from a shoreline that was located in western New York and western Pennsylvania running NNE-SSW and then turning NW-SE and paralleling the present day Lake Erie shoreline. iii The facies attributed to the Grimsby - Thorold formations can be ascribed to the three zones within the tripartite zonation suggested by Dalrymple et ale (1992) for estuaries, that is, a marine-dominated facies, a mixed energy facies, and a facies that is dominated by fluvial processes. Also, sediments within the Grimsby - Thorold are commonly fining upwards sequences which are common in estuarine settings whereas deltaic deposits are normally composed of coarsening upwards sequences in a vertical wedge shape with coarser material near the head. The only coarsening observed was in the Thorold Formation and attributed to non-marine deposition by palynological evidence. The presence of a lag deposit at the base of the sediments of the Grimsby Thorold formations suggests that they were incised into the Cabot Head Formation. Further, the thickness of Early Silurian sediments located between the top of the Queenston Formation, where Early Silurian sedimentation began, to the top of the Reynales - Irondequoit formation are constant whether the Grimsby - Thorold formations are present or not. Also, cross-sections using a sand body located in the Cabot Head Formation for correlation further imply that the Grimsby Formation has been incised into the previous deposits of the Cabot Head.

The sedimentology of the lower Silurian whirlpool sandstone in subsurface Lake Erie, Ontario

The lower Silurian Whirlpool Sandstone is composed of two main units: a fluvial unit and an estuarine to transitional marine unit. The lowermost unit is made up of sandy braided fluvial deposits, in shallow valleys, that flowed towards the northwest. The fluvial channels are largely filled by cross-bedded, well sorted, quartzose sands, with little ripple crosslaminated or overbank shales. Erosionally overlying this lower unit are brackish water to marine deposits. In the east, this unit consists of estuarine channels and tidal flat deposits. The channels consist of fluvial sands at the base, changing upwards into brackish and tidally influenced channelized sandstones and shales. The estuarine channels flowed to the southwest. Westwards, the unit contains backbarrier facies with extensive washover deposits. Separating the backbarrier facies from shoreface sandstone facies to the west, are barrier island sands represented by barrier-foreshore facies. The barrier islands are dissected by tidal inlets characterized by fining upward abandonment sequences. Inlet deposits are also present west of the barrier island, abandoned by transgression on the shoreface. The sandy marine deposits are replaced to the west by carbonates of the Manitoulin Limestone. During the latest Ordovician, a hiatus in crustal loading during the Taconic Orogeny led to erosional offloading and crustal rebound, the eroded material distributed towards the west, northwest and north as the terrestrial deposits of the fluvial Whirlpool. The "anti-peripheral bulge" of the rebound interfered with the peripheral bulge of the Michigan Basin, nulling the Algonquin Arch, and allowing the detritus of the fluvial Whirlpool to spread onto the Algonquin Arch. The Taconic Orogeny resumed in the earliest Silurian with crustal loading to the south and southeast, and causing tilting of the surface slope in subsurface Lake Erie towards the ii southwest. Lowstand terrestrial deposits were scoured into the new slope. The new crustal loading also reactivated the peripheral bulge of the Appalachian Basin, allowing it to interact with the bulge of the Michigan Basin, raising the Algonquin Arch. The crustal loading depressed the Appalachian basin and allowed transgression to occur. The renewed Algonquin Arch allowed the early Silurian transgression to proceed up two slopes, one to the east and one to the west. The transgression to the east entered the lowstand valleys and created the estuarine Whirlpool. The rising arch caused progradation of the Manitoulin carbonates upon shoreface facies of the Whirlpool Sandstone and upon offshore facies of the Cabot Head Formation. Further crustal loading caused basin subsidence and rapid transgression, abandoning the Whirlpool estuary in an offshore setting.