Housing price diffusion pattern of Australia's state capital cities

The ripple effect of house prices within metropolitan areas has recently been recognised by researchers. However, it is very difficult to formulate and measure this effect using conventional house price theories particularly in consideration of the spatial locations of cities. Based on econometrics principles of the cointegration test and the error correction model, this research develops an innovative approach to quantitatively examine the diffusion patterns of house prices in mega-cities of a country. Taking Australia's eight capital cities as an example, the proposed approach is validated in terms of an empirical study. The results show that a 1-1-2-4 diffusion pattern exists within these cities. Sydney is on the top tier with Melbourne in the second; Perth and Adelaide are in the third level and the other four cities lie on the bottom. This research may be applied to predict the regional housing market behavior in a country.

Smoothing Lipschitz functions

This paper describes a new approach to multivariate scattered data smoothing. It is assumed that the data are generated by a Lipschitz continuous function f, and include random noise to be filtered out. The proposed approach uses known, or estimated value of the Lipschitz constant of f, and forces the data to be consistent with the Lipschitz properties of f. Depending on the assumptions about the distribution of the random noise, smoothing is reduced to a standard quadratic or a linear programming problem. We discuss an efficient algorithm which eliminates the redundant inequality constraints. Numerical experiments illustrate applicability and efficiency of the method. This approach provides an efficient new tool of multivariate scattered data approximation.

Determination of structurally constrained controllors

This paper reports on determination of structurally constrained controllers for linear uncertain time-invariant systems from state controllers. It is shown that practical structures such as output and decentralized controllers may be derived from state feedback controllers. A previously studied load frequency control of a two-area interconnected power system is considered to illustrate the proposed approach.

Performance optimization for energy-aware adaptive checkpointing in embedded real-time systems

Using additional store-checkpoinsts (SCPs) and compare-checkpoints (CCPs), we present an adaptive checkpointing for double modular redundancy (DMR) in this paper. The proposed approach can dynamically adjust the checkpoint intervals. We also design methods to calculate the optimal numbers of checkpoints, which can minimize the average execution time of tasks. Further, the adaptive checkpointing is combined with the DVS (dynamic voltage scaling) scheme to achieve energy reduction. Simulation results show that, compared with the previous methods, the proposed approach significantly increases the likelihood of timely task completion and reduces energy consumption in the presence of faults.

Housing price diffusion pattern of Australia's state capital cities

The ripple effect of house prices within metropolitan areas has recently been recognised by researchers. However, it is very difficult to formulate and measure this effect using conventional house price theories particularly in consideration of the spatial locations of cities. Based on econometrics principles of the cointegration test and the error correction model, this research develops an innovative approach to quantitatively examine the diffusion patterns of house prices in mega-cities of a country. Taking Australia's eight capital cities as an example, the proposed approach is validated in terms of an empirical study. The results show that a 1-1-2-4 diffusion pattern exists within these cities. Sydney is on the top tier with Melbourne in the second; Perth and Adelaide are in the third level and the other four cities lie on the bottom. This research may be applied to predict the regional housing market behavior in a country.

Extended cutting angle method of global optimization

Methods of Lipschitz optimization allow one to find and confirm the global minimum of multivariate Lipschitz functions using a finite number of function evaluations. This paper extends the Cutting Angle method, in which the optimization problem is solved by building a sequence of piecewise linear underestimates of the objective function. We use a more flexible set of support functions, which yields a better underestimate of a Lipschitz objective function. An efficient algorithm for enumeration of all local minima of the underestimate is presented, along with the results of numerical experiments. One dimensional Pijavski-Shubert method arises as a special case of the proposed approach.

Into the future : inspiring and stimulating users' creativity

This paper proposes a new approach to engaging and stimulating users in the requirements analysis process when developing a new information system – an ICT innovation for business. The approach is based on a synthesis of a constructivist learning theory and a creativity education theory. In contrast to previous approaches in which the systems analyst elicits requirements from the user, in the proposed approach, the user is engaged and stimulated to become a proactive and creative learner in the process of identifying and discovering their business problem as well as exploring opportunities to apply ICT innovations to solve the problem.

Two experiential digital simulations are described as a proof of concept to demonstrate the proposed approach a learning environment. Learning from the case study suggests that both systems analyst and business users can be stimulated to be active learners in their discovery of problem, creative ideas and problem solutions in requirements elicitation and discovery.

Distributed protocol for communications among underwater vehicles

Underwater surveying by swarms of autonomous underwater vehicles presents problems in communication among the robots. These problems involve the bandwidth, power consumption, timing, processing power, and other issues. This paper presents a novel approach to communicate and coordinate effectively among underwater vehicles to accomplish this task successfully. The proposed approach solves issues by reducing the number of hops to conserve power, while reducing computation time and bandwidth, effectively utilizing resources to reduce the load on each node. Finally, the simulation results are presented, in order to prove that the proposed approach improves efficiency and effectiveness in communicating among underwater vehicles.

Communications for underwater robotics research platforms

This paper presents a distributed protocol for communication among autonomous underwater vehicles. It is a complementary approach for coordination between the autonomous underwater vehicles. This paper mainly describes different methods for underwater communication. One of the methods is brute force approach in which messages are broadcasted to all the communication nodes, which in turn will broadcast the acknowledgement. Issues relating to this brute force approach are time delay, number of hops, power consumption, message collision and other practical issues. These issues are discussed and solved by proposing a new method to improve efficiency of this proposed approach and its effectiveness in communication among autonomous underwater vehicles.

Australia's national men's health policy : masculinity matters

Issue addressed : The development of Australia's first national men's health policy provides an important opportunity for informed discussions of health and gender. It is therefore a concern that the stated policy appears to deliberately exclude hegemonic masculinity and other masculinities, despite evidence of their major influence on men's health-related values, beliefs, perspectives, attitudes, motivations and behaviour.

Methods : We provide an evidence-based critique of the proposed approach to a national men's health policy which raises important questions about whether the new policy can achieve its aims if it fails to acknowledge 'masculinity' as a key factor in Australian men's health.

Conclusion : The national men's health policy should be a means to encourage gender analysis in health. This will require recognition of the influence of hegemonic masculinity, and other masculinities, on men's health. Recognising the influence of 'masculinity' on men's health is not about 'blaming' men for 'behaving badly', but is crucial to the development of a robust, meaningful and comprehensive national men's health policy.

Cooperative hunting by distributed mobile robots based on local interaction

This paper proposes a distributed control approach called local interactions with local coordinate systems (LILCS)to multirobot hunting tasks in unknown environments, where a team of mobile robots hunts a target called evader, which will actively try to escape with a safety strategy. This robust approach can cope with accumulative errors of wheels and imperfect communication networks. Computer simulations show the validity of the proposed approach.

Development of the multi-scale analysis model to simulate strain localization occurring during material processing

Abstract A detailed description of possibilities given by the developed Cellular Automata—Finite Element (CAFE) multi scale model for prediction of the initiation and propagation of micro shear bands and shear bands in metallic materials subjected to plastic deformation is presented in the work. Particular emphasis in defining the criterion for initiation of micro shear and shear bands, as well as in defining the transition rules for the cellular automata, is put on accounting for the physical aspects of these phenomena occurring in two different scales in the material. The proposed approach led to the creation of the real multi scale model of strain localization phenomena. This model predicts material behavior in various thermo-mechanical processes. Selected examples of applications of the developed model to simulations of metal forming processes, which involve strain localization, are presented in the work. An approach based on the Smoothed Particle Hydrodynamic, which allows to overcome difficulties with remeshing in the traditional CAFE method, is a subject of this work as well. In the developed model remeshing becomes possible and difficulties limiting application of the CAFE method to simple deformation processes are solved. Obtained results of numerical simulaA detailed description of possibilities given by the developed Cellular Automata—Finite Element (CAFE) multi scale model for prediction of the initiation and propagation of micro shear bands and shear bands in metallic materials subjected to plastic deformation is presented in the work. Particular emphasis in defining the criterion for initiation of micro shear and shear bands, as well as in defining the transition rules for the cellular automata, is put on accounting for the physical aspects of these phenomena occurring in two different scales in the material. The proposed approach led to the creation of the real multi scale model of strain localization phenomena. This model predicts material behavior in various thermo-mechanical processes. Selected examples of applications of the developed model to simulations of metal forming processes, which involve strain localization, are presented in the work. An approach based on the Smoothed Particle Hydrodynamic, which allows to overcome difficulties with remeshing in the traditional CAFE method, is a subject of this work as well. In the developed model remeshing becomes possible and difficulties limiting application of the CAFE method to simple deformation processes are solved. Obtained results of numerical simulations are compared with the experimental results of cold rolling process to show good predicative capabilities of the developed model.tions are compared with the experimental results of cold rolling process to show good predicative capabilities of the developed model.

Power saving in sensor networks via mobile base station repositioning

This research investigated the effect of dynamically repositioning the geographic location of a mobile base station within a sensor network in order to reduce energy consumption and increase network lifetime. Through simulation and experimental methodology, the proposed approach outperformed existing methods by extending network lifetime whilst reducing energy consumption.

Realistic grasping of rigid virtual objects through event-based haptics

This research presents a novel haptic grasping interface and demonstrates its ability within multi-point event-based feedback. Through experimental methodology, the dynamics involved in grasp contact interactions are modelled based on first principles. The proposed approach demonstrates a method of realistically representing grasp contact with rigid virtual objects through multi-point interaction.

Effective DDoS attacks detection using generalized entropy metric

In information theory, entropies make up of the basis for distance and divergence measures among various probability densities. In this paper we propose a novel metric to detect DDoS attacks in networks by using the function of order α of the generalized (Rényi) entropy to distinguish DDoS attacks traffic from legitimate network traffic effectively. Our proposed approach can not only detect DDoS attacks early (it can detect attacks one hop earlier than using the Shannon metric while order α=2, and two hops earlier to detect attacks while order α=10.) but also reduce both the false positive rate and the false negative rate clearly compared with the traditional Shannon entropy metric approach.