A strategy to achieve enhanced electromagnetic interference shielding at ultra-low concentration of multiwall carbon nanotubes in P alpha MSAN/PMMA blends in the presence of a random copolymer PS-r-PMMA

A unique strategy was adopted to achieve an ultra-low electrical percolation threshold of multiwall carbon nanotubes (MWNTs) (0.25 wt%) in a classical partially miscible blend of poly-alpha-methylstyrene-co-acrylonitrile and poly(methyl methacrylate) (P alpha MSAN/PMMA), with a lower critical solution temperature. The polymer blend nanocomposite was prepared by standard melt-mixing followed by annealing above the phase separation temperature. In a two-step mixing protocol, MWNTs were initially melt-mixed with a random PS-r-PMMA copolymer and subsequently diluted with 85/15 P alpha MSAN/PMMA blends in the next mixing step. Mediated by the PS-r-PMMA, the MWNTs were mostly localized at the interface and bridged the PMMA droplets. This strategy led to enhanced electromagnetic interference (EMI) shielding effectiveness at 0.25 wt% MWNTs through multiple scattering from MWNT-covered droplets, as compared to the blends without the copolymer, which were transparent to electromagnetic radiation.

Regulation of Growth, Cell Shape, Cell Division, and Gene Expression by Second Messengers (p)ppGpp and Cyclic Di-GMP in Mycobacterium smegmatis

The alarmone (p)ppGpp regulates transcription, translation, replication, virulence, lipid synthesis, antibiotic sensitivity, biofilm formation, and other functions in bacteria. Signaling nucleotide cyclic di-GMP (c-di-GMP) regulates biofilm formation, motility, virulence, the cell cycle, and other functions. In Mycobacterium smegmatis, both (p) ppGpp and c-di-GMP are synthesized and degraded by bifunctional proteins Rel(Msm) and DcpA, encoded by rel(Msm) and dcpA genes, respectively. We have previously shown that the Delta rel(Msm) and Delta dcpA knockout strains are antibiotic resistant and defective in biofilm formation, show altered cell surface properties, and have reduced levels of glycopeptidolipids and polar lipids in their cell wall (K. R. Gupta, S. Kasetty, and D. Chatterji, Appl Environ Microbiol 81:2571-2578, 2015, http://dx.doi.org/10.1128/AEM.03999-14). In this work, we have explored the phenotypes that are affected by both (p) ppGpp and c-di-GMP in mycobacteria. We have shown that both (p) ppGpp and c-di-GMP are needed to maintain the proper growth rate under stress conditions such as carbon deprivation and cold shock. Scanning electron microscopy showed that low levels of these second messengers result in elongated cells, while high levels reduce the cell length and embed the cells in a biofilm-like matrix. Fluorescence microscopy revealed that the elongated Delta rel(Msm) and Delta dcpA cells are multinucleate, while transmission electron microscopy showed that the elongated cells are multiseptate. Gene expression analysis also showed that genes belonging to functional categories such as virulence, detoxification, lipid metabolism, and cell-wall-related processes were differentially expressed. Our results suggests that both (p) ppGpp and c-di-GMP affect some common phenotypes in M. smegmatis, thus raising a possibility of cross talk between these two second messengers in mycobacteria. IMPORTANCE Our work has expanded the horizon of (p) ppGpp and c-di-GMP signaling in Gram-positive bacteria. We have come across a novel observation that M. smegmatis needs (p) ppGpp and c-di-GMP for cold tolerance. We had previously shown that the Delta rel(Msm) and Delta dcpA strains are defective in biofilm formation. In this work, the overproduction of (p) ppGpp and c-di-GMP encased M. smegmatis in a biofilm-like matrix, which shows that both (p) ppGpp and c-di-GMP are needed for biofilm formation. The regulation of cell length and cell division by (p) ppGpp was known in mycobacteria, but our work shows that c-di-GMP also affects the cell size and cell division in mycobacteria. This is perhaps the first report of c-di-GMP regulating cell division in mycobacteria.

Influence of Local Magnetic Fields on P-Doped Si Floating Zone Melting Crystal Growth in Microgravity

A two-dimensional axisymmetric numerical model is presented to study the influence of local magnetic fields on P-doped Si floating zone melting crystal growth in microgravity. The model is developed based on the finite difference method in a boundary-fitted curvilinear coordinate system. Extensive numerical simulations are carried out, and parameters studied include the curved growth interface shape and the magnetic field configurations. Computed results show that the local magnetic field is more effective in reducing the impurity concentration nonuniformity at the growth interface in comparison with the longitudinal magnetic field. Moreover, the curved growth interface causes more serious impurity concentration nonuniformity at the growth interface than the case with a planar growth interface.

Kinetics and Force Dependence of P-selectin/PSGL-1 Interactions Measured by AFM

Leukocytes roll along the endothelium of postcapillary venules in response to inflammatory and thrombotic processes. The rolling under hydrodynamic shear forces is a first step in directing leukocytes out of the blood stream into sites of inflammation and is mediated by the selectins, a family of extended, modular, and calcium-dependent lectin receptors. The interactions between P-, E-or L-selectins and their count.

An Analytical Solution for Three-Dimensional Diffraction of Plane P-Waves by a Hemispherical Alluvial Valley with Saturated Soil Deposits

An analytical solution for the three-dimensional scattering and diffraction of plane P-waves by a hemispherical alluvial valley with saturated soil deposits is developed by employing Fourier-Bessel series expansion technique. Unlike previous studies, in which the saturated soil deposits were simulated with the single-phase elastic theory, in this paper, they are simulated with Biot's dynamic theory for saturated porous media, and the half space is assumed as a single-phase elastic medium. The effects of the dimensionless frequency, the incidence angle of P-wave and the porosity of soil deposits on the surface displacement magnifications of the hemispherical alluvial valley are investigated. Numerical results show that the existence of a saturated hemispherical alluvial valley has much influence on the surface displacement magnifications. It is more reasonable to simulate soil deposits with Biot's dynamic theory when evaluating the displacement responses of a hemispherical alluvial valley with an incidence of P-waves.

应用光阱技术测量P-selectin/PSGL-1键解离的断裂力

选择素(selectin)与配体相互作用在诸如炎症反应、肿瘤转移等生物学过程中具有重要作用;作用力影响受体-配体键解离.本文发展了基于光阱技术的新实验方法,用于考察P-选择素(P-selectin)与P-选择素糖蛋白配体-1(P-selectin Glycoprotein Ligand 1, PSGL-1)相互作用的解离过程.采用黏滞力法对光阱刚度系数进行标定,并通过分子在玻璃小球表面的功能化表征,研究力作用下P-selectin/PSGL-1键的解离,得到了在较低加载率(<25 pN/s)下键解离的断裂力分布,发现键的最可几断裂力随加载率而增加.实验结果在较低加载率下补充和验证了已有的结论.

Quantifying the Effects of Contact Duration, Loading Rate, and Approach Velocity on P-Selectin-PSGL-1 Interactions Using AFM

Kinetics and its regulation by extrinsic physical factors govern selectin-ligand interactions that mediate tethering and rolling of circulating cells on the vessel wall under hemodynamic forces. While the force regulation of off-rate for dissociation of selectin-ligand bonds has been extensively studied, much less is known about how transport impacts the on-rate for association of these bonds and their stability. We used atomic force microscopy (AFM) to quantify how the contact duration, loading rate, and approach velocity affected kinetic rates and strength of bonds of P-selectin interacting with P-selectin glycoprotein ligand I (PSGL-1). We found a saturable relationship between the contact time and the rupture force, a biphasic relationship between the adhesion probability and the retraction velocity, a piece-wise linear relationship between the rupture force and the logarithm of the loading rate, and a threshold relationship between the approach velocity and the rupture force. These results provide new insights into how physical factors regulate receptor-ligand interactions.

Comparación de parámetros reproductivos bajo inseminación artificial y monta natural en cerdas, (Cofradia, G.E.P.)

Este experimento se realizó en la Granja Experimental Porcina (G.E.P), Cofradía, Masaya, con 82 cerdas del cuarto parto, 30 servidas a través de inseminación artificial (I.A) y 52 cerdas por monta natural (M.N); iniciando en mayo de 1,995 hasta mayo de 1,996 con el objetivo de evaluar los parámetros reproductivos y económicos en ambos sistemas de monta. Los dos grupos de cerdas reproductoras estaban compuestos por las razas LANDRACE, YORKSHIRE y DUROC. Las variables evaluadas fueron: Tasa de concepción (T.C) y tasa de parición (T.P), números de crías por partos (N.C.P), peso vivo promedio del lechón en la camada al nacer (P.V.L.C), relación beneficio-costo (B-C). Los resultados finales comprobados al 5% de significancia estadísticas fueron: T.P en I.A con 56.66% menor que en M.N con 76.92%, en N.C.P para I.A con 7.06, menor que en M.N de 8.725, P.V.L.C en I.A de 1.85 kg, similar a 1.74 kg, en MN. Para la relación B-C en I.A fue de 0.53 córdobas y para M.N de 0.56 córdobas.

Distinct Element Analysis on Propagation Characteristics of P-Wave in Rock Pillar with Finite length

以节理岩体等效刚度的概念为基础,讨论了离散元刚性块体模型中节理刚度的选取问题。采用面-面接触模型模拟了纵波在一维岩体中的传播,给出了纵波波形；研究了阻尼比、软弱夹层以及节理间是否可拉对波传播规律的影响。

The Heterogeneous Growth of P(3MeTh)--An Ellipsometric Study

pan style="color: rgb(51, 51, 51); font-family: arial, helvetica, sans-serif; font-size: 13px; line-height: 22px; background-color: rgb(248, 248, 248);">Successive thicker P(3MeTh) layers are analysed by ex situ conventional and imaging ellipsometry. Thin films display a smooth surface, are compact and homogeneous while for a growth charge above 20 mC cm(-2) the polymer structure modifies to a still uniform but less dense layer. A two-layer model is used and a mathematical procedure is developed to obtain, simultaneously, from the experimental ellipsometric parameters, Delta and Psi, the thickness and the complex refractive index of P(3MeTh) films grown up to 80 mC cm(-2). Thicker polymer layers are disordered and present a high degree of surface roughness.&nbsp;pan>

Producción de biomasa y concentración de nutrientes en el pasto cubano (Pennisetum purpureum x P. tiphoides) CV CT - 115. Finca la Tigra, Cárdenas, Rivas, Nicaragua

Con el prop��sito de determinar la producción de la biomasa forrajera y la concentración de nutrientes del pasto cubano CT - 115, se realizó un estudio en la Finca la Tigra, Cárdenas, Rivas, para ello se utilizó un área de 48 m2, subdividida en tres parcelas de 16 m2, donde se realizaron cortes a los 15, 30, 45, 60 y 75 días. Se evaluaron las variables altura de la planta, producción de biomasa fresca y seca por hectárea, en cada muestreo se tomaron muestras de plantas de 1,000 g, las que fueron remitidas al laboratorio de suelo y planta de la UNA, donde se hicieron las determinaciones de contenido de materia seca, % de nitrógeno, % fósforo, % potasio, % calcio, % magnesio, hierro (ppm), manganeso (ppm) y zinc (ppm). Se realizarón análisis de correlación usando el programa SAS (Sistema de Análisis Estadístico) versión 9. para los elementos de la composición nutritiva de la planta y las variables rendimiento de biomasa y altura, a través del programa CVEXPT (Experto de Curvas) versión 1.4, se determinaron las curvas de mejor ajustes para dichas relaciones. Encontrándose que a medida que aumentaba la edad de corte, la producción de biomasa fresca y seca así como la altura tendían a incrementar, inversamente a ello los niveles de nutrientes en las plantas, las ecuaciones de mejor ajustes para la producción de biomasa fresca, seca y altura fueron el Lineal, Logístico y Rotacional, con r2 de 94, 98 y 99% respectivamente, para el caso de los nutrientes las ecuaciones de mejor ajuste fueron: los modelos de función Rotacional, Logístico, Polinomial y Harris también con r2 de 92 a 99%, evidenciándose con esto que las tendencias de los incrementos de la biomasa seca, altura, y la concentración de nutrientes no presentan comportamiento lineal. Únicamente para el caso de la biomasa fresca se presentó una tendencia lineal.

Evaluación de siete variedades de frijol común (Phaseolus vulgaris L.) y su respuesta a dosis creciente de fertilizantes (N-P)

El experimento fue conducido en la Estación Experimental "La Compañía" Carazo, en época de postrera (octubre diciembre de 1991), en suelos jóvenes de origen volcánico, con altos contenidos de carbono orgánico y alto porcentaje de saturación de bases, ricos en potasio y en algunos sectores deficiente en fósforo (1.5 ppm). Su textura es franca, moderadamente profundos, bien drenados y medianamente ácido a neutro. El experimento se estableció con el objetivo de evaluar la respuesta diferencial de siete variedades de frijol común (Phaseolus vulgaris L.) a dosis creciente de fertilizantes (N+P) utilizando como fuente la formula completa 18-48-0 El diseño utilizado fue Bloque Complete al Azar (BCA) con arreglo bifactorial con tres repeticiones, la parcelas las constituyeron seis surcos separados a 5O cm y con una longitud de 5 m., las parcelas útiles fueron los cuatro surcos centrales de cuatro metros de largo y las evaluaciones realizadas fueron: altura de planta, diámetro del tallo, número de plantas cosechadas por parcela útil, número de vaina por planta, número de grano por vaina peso de 100 granos, rendimiento de granos 14% de humedad y análisis foliar. Los resultados indican que el rendimiento de grano no mostró diferencias estadísticas significativas tanto para variedades como para los niveles de fertilizantes (N+P), sin embargo, podemos señalar que todas las variedades superaron numéricamente al testigo Rev-79, presentando el mayor promedio la DOR-391. En cuanto a los niveles, también presentaron diferencias numéricas obteniendo el mayor promedio el testigo (cero aplicación), lo cual indica que en el suelo se encontraban suficiente nutrientes para satisfacer la demanda de la planta.

The application of B-P constitutive equations in finite element analysis of high velocity impact

We present in this paper the application of B-P constitutive equations in finite element analysis of high velocity impact. The impact process carries out in so quick time that the heat-conducting can be neglected and meanwhile, the functions of temperature in equations need to be replaced by functions of plastic work. The material constants in the revised equations can be determined by comparison of the one-dimensional calculations with the experiments of Hopkinson bar. It can be seen from the comparison of the calculation with the experiment of a tungsten alloy projectile impacting a three-layer plate that the B-P constitutive equations in that the functions of temperature were replaced by the functions of plastic work can be used to analysis of high velocity impact.