Dynamic Analysis of high Speed Railway Traffic Loads on Ballasted Track

This paper reports the studies carried out to develop and calibrate the optimal models for the objectives of this work. In particular, quarter bogie model for vehicle, rail-wheel contact with Lagrangian multiplier method, 2D spatial discretization were selected as the optimal decisions. Furthermore, the 3D model of coupled vehicle-track also has been developed to contrast the results obtained in the 2D model. The calculations were carried out in the time domain and envelopes of relevant results were obtained for several track profiles and speed ranges. Distributed elevation irregularities were generated based on power spectral density (PSD) distributions. The results obtained include the wheel-rail contact forces, forces transmitted to the bogie by primary suspension. The latter loads are relevant for the purpose of evaluating the performance of the infrastructure

Solución para la delegación de identidad en Sistemas de Gestión de Identidad paneuropeos basada en infraestructuras de certificación y lenguajes formales de asertos de seguridad

La estrategia i2010 de la UE tiene como objetivo garantizar el liderazgo europeo en materia de TIC y poner los beneficios de la Sociedad de la Información al servicio de la economía, la sociedad y la calidad de vida personal, teniendo presente que los éxitos de Europa hasta la fecha se han basado en favorecer la competencia leal en los mercados de las telecomunicaciones y crear un mercado sin fronteras para contenidos y medios de comunicación digitales. En esta línea, la Comisión Europea ha establecido que los distintos estados miembros deben contribuir activamente al desarrollo y uso seguro de los servicios telemáticos entre sus ciudadanos. Más concretamente, atribuye a las Administraciones Públicas, tanto a nivel nacional, regional como local, un papel dinamizador de la Sociedad de la Información que les obliga a ofrecer paulatinamente todos los actos administrativos a los ciudadanos a través de Internet. Como primer paso para el uso seguro de los servicios telemáticos que ofrecen las instituciones públicas se hace preciso dotar a los ciudadanos de una identidad digital que les permita identificarse ante un Proveedor de Servicio o ante otros ciudadanos de manera inequívoca. Por esta razón, la mayoría de países europeos – y otros en el resto del mundo – están promoviendo, sistemas fiables de gestión de identidad electrónica (eIDM), de tal manera que los ciudadanos, las empresas y departamentos gubernamentales (incluso en Estados miembros diferentes) pueden identificar y certificar sus operaciones con precisión, rapidez y sencillez. Sin embargo, la gestión de esta identidad por las Administraciones Públicas supone un importante desafío, acentuado cuando se hace necesaria la interoperabilidad entre Administraciones de diferentes países, puesto que personas y entidades tienen credenciales de identificación diferentes en función de su propio marco jurídico nacional. Consciente del problema, en la Unión Europea se han puesto en marcha una serie de proyectos con el objetivo de conseguir la interoperabilidad de los eIDMs entre las instituciones públicas de diferentes Estados miembros. A pesar de ello, las soluciones adoptadas hasta la fecha son insuficientes porque no prevén todos los posibles casos de interacción del usuario con las instituciones. En concreto, no tienen en cuenta un aspecto muy importante que se ofrece en los distintos sistemas jurídicos nacionales, a saber, la delegación de la identidad, mediante la cual un ciudadano puede autorizar a otro para que actúe en su nombre para acceder a determinados servicios prestados por las instituciones públicas. En esta tesis se realizan un conjunto de aportaciones que dan solución a distintos aspectos de los problemas planteados y que, de forma conjunta, permiten la interoperabilidad y la delegación de identidad en determinados Sistemas de Gestión de Identidad aplicados al entorno de las Administraciones Públicas. En el caso de la delegación, se ha definido un sistema de delegación dinámica de identidad entre dos entidades genéricas que permite solucionar el problema del acceso delegado a los servicios telemáticos ofrecidos por las Administraciones Públicas. La solución propuesta se basa en la generación de un token de delegación, constituido a partir de un Certificado Proxy, que permite a la entidad que delega establecer la delegación de identidad en otra entidad en base a un subconjunto de sus atributos como delegador, estableciendo además, en el propio token de delegación, restricciones en el conjunto de servicios accesibles a la entidad delegada y el tiempo de validez de la delegación. Adicionalmente, se presentan los mecanismos necesarios tanto para poder revocar un token de delegación como para comprobar sin un token de delegación ha sido o no revocado. Para ello se propone una solución para la identificación unívoca de tokens de delegación y la creación de una nueva entidad denominada Autoridad de Revocación de Tokens de Delegación. Entre las características del sistema de delegación propuesto destaca el que es lo suficientemente seguro como para ser utilizado en el entorno de la Administración Pública, que no requiere el uso de mecanismos off‐line para la generación de la delegación y que se puede realizar la delegación de forma instantánea y sin la necesidad de trámites complejos o la participación de un elevado número de entidades. Adicionalmente, el token de delegación propuesto es perfectamente integrable en las infraestructura de clave pública actual lo que hace que, dado que gran parte de las Administraciones Públicas europeas basan sus sistemas de identidad digital en el uso de la PKI y certificados de identidad X.509, la solución pueda ser puesta en marcha en un entorno real sin necesidad de grandes cambios o modificaciones de comportamiento. En lo referente a la interoperabilidad, se realiza un análisis exhaustivo y la correspondiente evaluación de las principales propuestas de Sistemas de Gestión de Identidad orientados a conseguir la interoperabilidad realizadas hasta la fecha en el marco de la Unión Europea y se propone, a alto nivel, una arquitectura de interoperabilidad para la gestión de identidad en las Administraciones Públicas. Dicha arquitectura es lo suficientemente genérica como para poder ser aplicada tanto en el entorno pan‐Europeo como en los entornos nacionales, autonómicos y locales, de tal forma que la interoperabilidad en la gestión de la identidad esté garantizada en todos los niveles de la Administración Pública. Por último, mediante la integración de la solución de delegación dinámica de identidad y la arquitectura de interoperabilidad propuestas se presenta una solución al problema de la delegación en un escenario pan‐Europeo de gestión de identidad, dando lugar a una arquitectura global de interoperabilidad pan‐Europea con soporte a la delegación de identidad. SUMMARY The i2010 European Union Plan aims to ensure European leadership in ICT and to promote the positive contribution that information and communication technologies can make to the economic, social and personal quality of life, bearing in mind that, to date, success in Europe has been based on promoting fair competition in telecommunications markets and on creating a borderless market for contents and digital media. In this line, the European Commission has established that the different member states should contribute actively to the development and secure use of telematic services among their citizens. More specifically, it is attributed to national, regional and local Public Administrations to have a supportive role of the Information Society, requiring them to gradually provide the citizens with Internet‐based access to all administrative procedures acts. As a first step for the secure use of telematic services offered by public institutions, it is necessary to provide the citizens with a digital identity to enable them to identify themselves unequivocally to a Service Provider or to other citizens. For this reason, most European countries ‐ and others in the rest of the world ‐ are promoting reliable systems for managing electronic identity (eIDM), so that citizens, businesses and government departments (even in different Member States) can identify and certify their operations with precision, speed and simplicity. However, the identity management by Public Administrations is a major challenge that becomes more difficult when interoperability between administrations of different countries is needed, due to the fact that individuals and entities have different identification credentials according to their own national legal framework. Aware of the problem, the European Union has launched a series of projects with the aim of achieving interoperability of eIDMs between public institutions of different Member States. However, the solutions adopted to date are insufficient because they do not foresee all possible cases of user interaction with the institutions. In particular, solutions do not take into account a very important aspect that is offered in different national legal systems, namely, the delegation of identity, by which a citizen can authorize another to act on his/her behalf to access certain services provided by public institutions. In this thesis a collection of contributions that provide solution to different aspects of the aforementioned problems are carried out. The solutions, in global, enable interoperability and identity delegation in some of the Identity Management Systems applied to Public Administration environment. In the case of delegation, a dynamic identity delegation system between generic entities is defined. This system makes it possible to solve the problem of delegated access to telematic services offered by Public Administrations. The proposed solution is based on the generation of a piece of information called delegation token. This delegation token, derived from a Proxy Certificate, allows the establishment of identity delegation by an entity that delegates (delegator) in other entity (delegatee) making use of a subset of delegator attributes. It also establishes restrictions on services that can be used by the delegated entity and the expiry date of delegation. In addition to this, the mechanisms necessary to revoke and check the revocation status of a delegation token are presented. To do this, a solution to univocally identify delegation tokens and the creation of a completely new entity, called Token Delegation Revocation Authority, are proposed. The most remarkable characteristics of the proposed delegation system are its security, enough for it to be used in the Public Administration environment, the fact that it does not require off‐line processes in order to generate the delegation, and the possibility of performing the delegation instantaneously and without neither complex processes nor the intervention of a large number of entities. The proposed delegation token can be completely incorporated into current Public Key Infrastructure (PKI). Thus, since most of the European Public Administrations base their digital identity systems on PKI and X.509 identity certificates, the solution can be adopted in a real environment without great changes or performance modifications. Regarding interoperability, an exhaustive analysis and evaluation of most significant proposals on Identity Management Systems that aim to achieve interoperability carried out in the European Union framework until now are performed. A high level identity management interoperability architecture for Public Administrations is also proposed. This architecture is sufficiently generic to be applied to both pan‐European environment and national, regional or local environments, thus interoperability in identity management at all Public Administration levels is guaranteed. Finally, through the integration of the proposed dynamic identity delegation solution and the high level interoperability architecture, a solution to the problem of identity delegation in a pan‐European identity management environment is suggested, leading to a pan‐European global interoperability architecture with identity delegation support.

Mathematical models for the arrangement and the cleaning of the river basin and surroundings of the river sandy grounds to its passage by the city of Salta (Argentina)

The province of Salta is located the Northwest of Argentina in the border with Bolivia, Chile and Paraguay. Its Capital is the city of Salta that concentrates half of the inhabitants of the province and has grown to 600000 hab., from a small active Spanish town well founded in 1583. The city is crossed by the Arenales River descending from close mountains at North, source of water and end of sewers. But with actual growing it has become a focus of infection and of remarkable unhealthiness. It is necessary to undertake a plan for the recovery of the river, directed to the attainment of the well-being and to improve the life?s quality of the Community. The fundamental idea of the plan is to obtain an ordering of the river basin and an integral management of the channel and its surroundings, including the cleaning out. The improvement of the water?s quality, the healthiness of the surroundings and the improvement of the environment, must go hand by hand with the development of sport activities, of relaxation, tourism, establishment of breeding grounds, kitchen gardens, micro enterprises with clean production and other actions that contribute to their benefit by the society, that being a basic factor for their care and sustainable use. The present pollution is organic, chemical, industrial, domestic, due to the disposition of sweepings and sewer effluents that affects not only the flora and small fauna, destroying the biodiversity, but also to the health of people living in their margins. Within the plan it will be necessary to consider, besides hydric and environmental cleaning and the prevention of floods, the planning of the extraction of aggregates, the infrastructure and consolidation of margins works and the arrangement of all the river basin. It will be necessary to consider the public intervention at state, provincial and local level, and the private intervention. In the model it has been necessary to include the sub-model corresponding to the election of the entity to be the optimal instrument to reach the proposed objectives, giving an answer to the social, environmental and economic requirements. For that the authors have used multi-criteria decision methods to qualify and select alternatives, and for the programming of their implementation. In the model the authors have contemplated the short, average and long term actions. They conform a Paretooptimal alternative which secures the ordering, integral and suitable management of the basin of the Arenales River, focusing on its passage by the city of Salta.

Proposal of a dynamic performance index to analyze driving pattern effect on car emissions

The contributions of driver behaviour as well as surrounding infrastructure are decisive on pollutant emissions from vehicles in real traffic situations. This article deals with the preliminary study of the interaction between the dynamic variables recorded in a vehicle (driving pattern) and pollutant emissions produced over a given urban route. It has been established a “dynamic performance index”-DPI, which is calculated from some driving pattern parameters, which in turn depends on traffic congestion level and route characteristics, in order to determine whether the driving has been aggressive, normal or calm. Two passenger cars instrumented with a portable activity measurement system -to record dynamic variables- and on-board emission measurement equipment have been used. This study has shown that smooth driving patterns can reduce up to 80% NOX emissions and up to 20% of fuel in the same route

A big data platform for large scale event processing

To date, big data applications have focused on the store-and-process paradigm. In this paper we describe an initiative to deal with big data applications for continuous streams of events. In many emerging applications, the volume of data being streamed is so large that the traditional ‘store-then-process’ paradigm is either not suitable or too inefficient. Moreover, soft-real time requirements might severely limit the engineering solutions. Many scenarios fit this description. In network security for cloud data centres, for instance, very high volumes of IP packets and events from sensors at firewalls, network switches and routers and servers need to be analyzed and should detect attacks in minimal time, in order to limit the effect of the malicious activity over the IT infrastructure. Similarly, in the fraud department of a credit card company, payment requests should be processed online and need to be processed as quickly as possible in order to provide meaningful results in real-time. An ideal system would detect fraud during the authorization process that lasts hundreds of milliseconds and deny the payment authorization, minimizing the damage to the user and the credit card company.

Metodología de evaluación de la seguridad vial en intersecciones basada en el análisis cuantitativo de conflictos entre vehículos

El modo tradicional de estimar el nivel de seguridad vial es el registro de accidentes de tráfico, sin embargo son altamente variables, aleatorios y necesitan un periodo de registro de al menos 3 años. Existen metodologías preventivas en las cuales no es necesario que ocurra un accidente para determinar el nivel de seguridad de una intersección, como lo es la técnica de los conflictos de tráfico, que introduce las mediciones alternativas de seguridad como cuantificadoras del riesgo de accidente. El objetivo general de la tesis es establecer una metodología que permita clasificar el riesgo en intersecciones interurbanas, en función del análisis de conflictos entre vehículos, realizado mediante las variables alternativas o indirectas de seguridad vial. La metodología para el análisis y evaluación temprana de la seguridad en una intersección, estará basada en dos medidas alternativas de seguridad: el tiempo hasta la colisión y el tiempo posterior a la invasión de la trayectoria. El desarrollo experimental se realizó mediante estudios de campo, para la parte exploratoria de la investigación, se seleccionaron 3 intersecciones interurbanas en forma de T donde se obtuvieron las variables que caracterizan los conflictos entre vehículos; luego mediante técnicas de análisis multivariante, se obtuvo los modelos de clasificación del riesgo cualitativo y cuantitativo. Para la homologación y el estudio final de concordancia entre el índice propuesto y el modelo de clasificación, se desarrollaron nuevos estudios de campo en 6 intersecciones interurbanas en forma de T. El índice de riesgo obtenido resulta una herramienta muy útil para realizar evaluaciones rápidas conducentes a estimar la peligrosidad de una intersección en T, debido a lo simple y económico que resulta obtener los registros de datos en campo, por medio de una rápida capacitación a operarios; la elaboración del informe de resultados debe ser por un especialista. Los índices de riesgo obtenidos muestran que las variables originales más influyentes son las mediciones de tiempo. Se pudo determinar que los valores más altos del índice de riesgo están relacionados a un mayor riesgo de que un conflicto termine en accidente. Dentro de este índice, la única variable cuyo aporte es proporcionalmente directo es la velocidad de aproximación, lo que concuerda con lo que sucede en un conflicto, pues una velocidad excesiva se manifiesta como un claro factor de riesgo ya que potencia todos los fallos humanos en la conducción. Una de las principales aportaciones de esta tesis doctoral a la ingeniería de carreteras, es la posibilidad de aplicación de la metodología por parte de administraciones de carreteras locales, las cuales muchas veces cuentan con recursos de inversión limitados para efectuar estudios preventivos, sobretodo en países en vías de desarrollo. La evaluación del riesgo de una intersección luego de una mejora en cuanto a infraestructura y/o dispositivos de control de tráfico, al igual que un análisis antes – después, pero sin realizar una comparación mediante la ocurrencia de accidentes, sino que por medio de la técnica de conflictos de tráfico, se puede convertir en una aplicación directa y económica. Además, se pudo comprobar que el análisis de componentes principales utilizado en la creación del índice de riesgo de la intersección, es una herramienta útil para resumir todo el conjunto de mediciones que son posibles de obtener con la técnica de conflictos de tráfico y que permiten el diagnóstico del riesgo de accidentalidad en una intersección. En cuanto a la metodología para la homologación de los modelos, se pudo establecer la validez y confiabilidad al conjunto de respuestas entregadas por los observadores en el registro de datos en campo, ya que los resultados de la validación establecen que la medición de concordancia de las respuestas entregadas por los modelos y lo observado, son significativas y sugieren una alta coincidencia entre ellos. ABSTRACT The traditional way of estimating road safety level is the record of occurrence of traffic accidents; however, they are highly variable, random, and require a recording period of at least three years. There are preventive methods which do not need an accident to determine the road safety level of an intersection, such as traffic conflict technique, which introduces surrogate safety measures as parameters for the evaluation of accident risks. The general objective of the thesis is to establish a methodology that will allow the classification of risk at interurban intersections as a function of the analysis of conflicts between vehicles performed by means of surrogate road safety variables. The proposal of a methodology for the analysis and early evaluation of safety at an intersection will be based on two surrogate safety measures: the time to collision and the post encroachment time. On the other hand, the experimental development has taken place by means of field studies in which the exploratory part of the investigation selected three interurban T-intersections where the application of the traffic conflict technique gave variables that characterize the conflicts between vehicles; then, using multivariate analysis techniques, the models for the classification of qualitative and quantitative risk were obtained. With the models new field studies were carried out at six interurban Tintersections with the purpose of developing the homologation and the final study of the agreement between the proposed index and the classification model. The risk index obtained is a very useful tool for making rapid evaluations to estimate the hazard of a T-intersection, as well as for getting simply and economically the field data records after a fast training of the workers and then preparing the report of results by a specialist. The risk indices obtained show that the most influential original variables are the measurements of time. It was determined that the highest risk index values are related with greater risk of a conflict resulting in an accident. Within this index, the only variable whose contribution is proportionally direct is the approach speed, in agreement with what happens in a conflict, because excessive speed appears as a clear risk factor at an intersection because it intensifies all the human driving faults. One of the main contributions of this doctoral thesis to road engineering is the possibility of applying the methodology by local road administrations, which very often have limited investment resources to carry out these kinds of preventive studies, particularly in developing countries. The evaluation of the risk at an intersection after an improvement in terms of infrastructure and/or traffic control devices, the same as a before/after analysis, without comparison of accident occurrence but by means of the traffic conflict technique, can become a direct and economical application. It is also shown that main components analysis used for producing the risk index of the intersection is a useful tool for summarizing the whole set of measurements that can be obtained with the traffic conflict technique and allow diagnosing accident risk at an intersection. As to the methodology for the homologation of the models, the validity and reliability of the set of responses delivered by the observers recording the field data could be established, because the results of the validation show that agreement between the observations and the responses delivered by the models is significant and highly coincident.

Autonomous vehicle control systems for safe crossroads

This article presents a cooperative manoeuvre among three dual mode cars – vehicles equipped with sensors and actuators, and that can be driven either manually or autonomously. One vehicle is driven autonomously and the other two are driven manually. The main objective is to test two decision algorithms for priority conflict resolution at intersections so that a vehicle autonomously driven can take their own decision about crossing an intersection mingling with manually driven cars without the need for infrastructure modifications. To do this, the system needs the position, speeds, and turning intentions of the rest of the cars involved in the manoeuvre. This information is acquired via communications, but other methods are also viable, such as artificial vision. The idea of the experiments was to adjust the speed of the manually driven vehicles to force a situation where all three vehicles arrive at an intersection at the same time.

El núcleo de red en redes de nueva generación

El presente proyecto fin de carrera tiene como objetivo realizar un estudio del núcleo de red en las de redes de nueva generación (NGN) y de cómo la evolución de las redes actuales hacia estos conceptos producirá un cambio en la forma de pensar y desarrollar las redes de comunicaciones del futuro. El estudio esta desglosado en tres grandes partes y se inicia con el análisis de la evolución que ha sufrido el núcleo de red en las redes de comunicaciones móviles digitales desde la implantación de las primeras redes digitales hasta la actualidad abarcando tanto la evolución de las redes troncales como de las redes de acceso así como los cambios que han tenido lugar tanto dentro de las propias estructuras de red de los operadores como la forma de interconectarse entre sus redes. Una segunda parte que constituye el cuerpo teórico del trabajo donde se estudia a nivel funcional y de arquitectura de red el desarrollo de los nuevos modelos de red proporcionados por los organismos de estandarización que dan lugar a la aparición de las redes de nueva generación (NGN) y que constituirán el siguiente paso en la evolución de las redes de comunicaciones hacia una infraestructura de red común para todas las redes de acceso actuales. Y una tercera parte que tiene como objetivo el estudio del grado de transformación que tienen que sufrir el núcleo de red en actuales redes troncales de comunicaciones móviles y terrestres, así como una valoración del estado actual de dicha integración, de las dificultades que están encontrando fabricantes y proveedores de servicio para la implementación de dichas redes en el contexto tecnológico y económico actual y su respectivo análisis de como afectará este cambio a los modelos de negocio de los proveedores de servicios de telecomunicaciones. Finalmente se estudia como se esta llevando a cabo este proceso por medio de un caso práctico de implantación e interconexión de la solución propuesta por un fabricante de equipamiento basándose en los modelos anteriormente expuestos en una red comercial de un operador en España y todas las implicaciones asociadas a esta caso concreto. The object of this work is to provide a deep view about the core network inside next generation network (NGN) and how the evolution of the current comunications networks towards the concepts introduced by these new networks brings a change in the way of think and develop communications networks of the future. This work is composed of three blocks and one real case and it starts with the analysis of the evolution of the core network in digital mobile comunications networks since the beginning of the digital mobile comunications networks deployments until nowadays both in core network side and access network side and how the providers have made changes inside their comunications infrastructure and how they interconnect them with other networks. A second part which is the central theoretical part of this work where it is studied the next generation network models stablished by telecomunications associations and how they will be the next step in the evolution of comunications networks towards a common network infrastructure for all existing access networks. A third part where it is studied the level of transformation that core network in mobile and terrestrial comunications networks have to experienced since current situation up to next generation scenarios and what it is the impact of these changes, the issues that are arising for developers, manufactures and service providers in this process, the way that these changes will improve and shift telecomunications business models and how the current economic and technological context is influencing in the whole process. Finally it is studied a actual case about a proposed solution by a manufacturer that based on the models exposed in second part take place a integration and interconection process in a the comercial network of one telecomunication service providers in Spain. This final part regards to all implications associated with this specific case.

Modelado de redes SMATV mediante técnicas de medida TDA

En este Proyecto se pretende establecer la forma de realizar un análisis correcto y ajustado de las redes SMATV (Satellite Master Antenna Television), incluidas dentro de las ICT (Infraestructura Común de Telecomunicaciones), mediante el método de análisis TDA (Time Domain Analysis). Para ello, en primer lugar se procederá a hacer un estudio teórico sobre las ICT’s y sobre las bases en las que se sustenta el método de análisis TDA que sirva como puente introductorio al tema principal de este proyecto. Este tema es el de, mediante el programa de simulación AWR, caracterizar la señal más adecuada para realizar medidas de calidad en las redes SMATV mediante la técnica del TDA y ser capaz de realizar un estudio conciso de estas. Esto se pretende conseguir mediante la definición más correcta de los parámetros de la señal de entrada que se introduciría en la red en futuras medidas de prueba. Una vez conseguida una señal "tipo", se caracterizarán diferentes dispositivos o elementos que forman las redes SMATV para comprobar que la medida realizada con el método del TDA es igual de válida que realizada con el método de análisis vectorial de redes (VNA). ABSTRACT This project aims to establish how to perform a proper analysis and set of SMATV networks (Satellite Master Antenna Television), included within the ICT (Common Telecommunications Infrastructure) by the method of analysis TDA (Time Domain Analysis). To do this, first it will proceed to make a theoretical study on the ICT's and the basis on which the method of analysis TDA is based, introduction that serve as a bridge to the main issue of this project. This issue is about characterizing the most appropriate signal quality measurements in SMATV networks using the technique of AD through the AWR simulation program, and be able to make a concise study of these. This is intended to achieve through the proper definition of the parameters of the input signal, that would be introduced into the network in future test measures. Once achieved a signal "type", will be characterized different devices or elements forming SMATV networks to check that the measure on the TDA method is as valid as on the method of vector network analysis (VNA) .

A multinational SDI-based system to facilitate disaster risk management in the Andean Community

A useful strategy for improving disaster risk management is sharing spatial data across different technical organizations using shared information systems. However, the implementation of this type of system requires a large effort, so it is difficult to find fully implemented and sustainable information systems that facilitate sharing multinational spatial data about disasters, especially in developing countries. In this paper, we describe a pioneer system for sharing spatial information that we developed for the Andean Community. This system, called SIAPAD (Andean Information System for Disaster Prevention and Relief), integrates spatial information from 37 technical organizations in the Andean countries (Bolivia, Colombia, Ecuador, and Peru). SIAPAD was based on the concept of a thematic Spatial Data Infrastructure (SDI) and includes a web application, called GEORiesgo, which helps users to find relevant information with a knowledge-based system. In the paper, we describe the design and implementation of SIAPAD together with general conclusions and future directions which we learned as a result of this work.

Aspectos de la medición dinámica instantánea de emisiones de motores. Aplicación al desarrollo de un equipo portátil y una metodología para estudios de contaminación de vehículos en tráfico real.

Esta Tesis Doctoral se encuadra en el ámbito de la medida de emisiones contaminantes y de consumo de combustible en motores de combustión interna alternativos cuando se utilizan como plantas de potencia para propulsión de vehículos ligeros de carretera, y más concretamente en las medidas dinámicas con el vehículo circulando en tráfico real. En este ámbito, el objetivo principal de la Tesis es estudiar los problemas asociados a la medición en tiempo real con equipos embarcados de variables medioambientales, energéticas y de actividad, de vehículos ligeros propulsados por motores térmicos en tráfico real. Y como consecuencia, desarrollar un equipo y una metodología apropiada para este objetivo, con el fin de realizar consiguientemente un estudio sobre los diferentes factores que influyen sobre las emisiones y el consumo de combustible de vehículos turismo en tráfico real. La Tesis se comienza realizando un estudio prospectivo sobre los trabajos de otros autores relativos al desarrollo de equipos portátiles de medida de emisiones (Portable Emission Measurement Systems – PEMS), problemas asociados a la medición dinámica de emisiones y estudios de aplicación en tráfico real utilizando este tipo de equipos. Como resultado de este estudio se plantea la necesidad de disponer de un equipo específicamente diseñado para ser embarcado en un vehículo que sea capaz de medir en tiempo real las concentraciones de emisiones y el caudal de gases de escape, al mismo tiempo que se registran variables del motor, del vehículo y del entorno como son la pendiente y los datos meteorológicos. De esta forma se establecen las especificaciones y condiciones de diseño del equipo PEMS. Aunque al inicio de esta Tesis ya existían en el mercado algunos sistemas portátiles de medida de emisiones (PEMS: Portable Emissions Measurement Systems), en esta Tesis se investiga, diseña y construye un nuevo sistema propio, denominado MIVECO – PEMS. Se exponen, discuten y justifican todas las soluciones técnicas incorporadas en el sistema que incluyen los subsistema de análisis de gases, subsistemas de toma de muestra incluyendo caudalímetro de gases de escape, el subsistema de medida de variables del entorno y actividad del vehículo y el conjunto de sistemas auxiliares. El diseño final responde a las hipótesis y necesidades planteadas y se valida en uso real, en banco de rodillos y en comparación con otro equipos de medida de emisiones estacionarios y portátiles. En esta Tesis se presenta también toda la investigación que ha conducido a establecer la metodología de tratamiento de las señales registradas en tiempo real que incluye la sincronización, cálculos y propagación de errores. La metodología de selección y caracterización de los recorridos y circuitos y de las pautas de conducción, preparación del vehículo y calibración de los equipos forma también parte del legado de esta Tesis. Para demostrar la capacidad de medida del equipo y el tipo de resultados que pueden obtenerse y que son útiles para la comunidad científica, y las autoridades medioambientales en la parte final de esta Tesis se plantean y se presentan los resultados de varios estudios de variables endógenas y exógenas que afectan a las emisiones instantáneas y a los factores de emisión y consumo (g/km) como: el estilo de conducción, la infraestructura vial, el nivel de congestión del tráfico, tráfico urbano o extraurbano, el contenido de biocarburante, tipo de motor (diesel y encendido provocado), etc. Las principales conclusiones de esta Tesis son que es posible medir emisiones másicas y consumo de motores de vehículos en uso real y que los resultados permiten establecer políticas de reducción de impacto medio ambiental y de eficiencia energética, pero, se deben establecer unas metodologías precisas y se debe tener mucho cuidado en todo el proceso de calibración, medida y postratamientos de los datos. Abstract This doctoral thesis is in the field of emissions and fuel consumption measurement of reciprocating internal combustion engines when are used as power-trains for light-duty road vehicles, and especially in the real-time dynamic measurements procedures when the vehicle is being driven in real traffic. In this context, the main objective of this thesis is to study the problems associated with on-board real-time measuring systems of environmental, energy and activity variables of light vehicles powered by internal combustion engines in real traffic, and as a result, to develop an instrument and an appropriate methodology for this purpose, and consequently to make a study of the different factors which influence the emissions and the fuel consumption of passenger cars in real traffic. The thesis begins developing a prospective study on other authors’ works about development of Portable Emission Measurement Systems (PEMS), problems associated with dynamic emission measurements and application studies on actual traffic using PEMS. As a result of this study, it was shown that a measuring system specifically designed for being on-board on a vehicle, which can measure in real time emission concentrations and exhaust flow, and at the same time to record motor vehicle and environment variables as the slope and atmospheric data, is needed; and the specifications and design parameters of the equipment are proposed. Although at the beginning of this research work there were already on the market some PEMS, in this Thesis a new system is researched, designed and built, called MIVECO – PEMS, in order to meet such measurements needs. Following that, there are presented, discussed and justify all technical solutions incorporated in the system, including the gas analysis subsystem, sampling and exhaust gas flowmeter subsystem, the subsystem for measurement of environment variables and of the vehicle activity and the set of auxiliary subsystems. The final design meets the needs and hypotheses proposed, and is validated in real-life use and chassis dynamometer testing and is also compared with other stationary and on-board systems. This thesis also presents all the research that has led to the methodology of processing the set of signals recorded in real time including signal timing, calculations and error propagation. The methodology to select and characterize of the routes and circuits, the driving patterns, and the vehicle preparation and calibration of the instruments and sensors are part of the legacy of this thesis. To demonstrate the measurement capabilities of the system and the type of results that can be obtained and that are useful for the scientific community and the environmental authorities, at the end of this Thesis is presented the results of several studies of endogenous and exogenous variables that affect the instantaneous and averaged emissions and consumption factors (g/km), as: driving style, road infrastructure, the level of traffic congestion, urban and extra-urban traffic, biofuels content, type of engine (diesel or spark ignition) etc. The main conclusions of this thesis are that it is possible to measure mass emissions and consumption of vehicle engines in actual use and that the results allow us to establish policies to reduce environmental impact and improve energy efficiency, but, to establish precise methodologies and to be very careful in the entire process of calibration, measurement and data post-treatment is necessary.

A semantic scheduler architecture for federated hybrid clouds

Cloud computing is one the most relevant computing paradigms available nowadays. Its adoption has increased during last years due to the large investment and research from business enterprises and academia institutions. Among all the services cloud providers usually offer, Infrastructure as a Service has reached its momentum for solving HPC problems in a more dynamic way without the need of expensive investments. The integration of a large number of providers is a major goal as it enables the improvement of the quality of the selected resources in terms of pricing, speed, redundancy, etc. In this paper, we propose a system architecture, based on semantic solutions, to build an interoperable scheduler for federated clouds that works with several IaaS (Infrastructure as a Service) providers in a uniform way. Based on this architecture we implement a proof-of-concept prototype and test it with two different cloud solutions to provide some experimental results about the viability of our approach.

Semantic scheduling of virtualized infrastructures for scientific workflows

Virtualized Infrastructures are a promising way for providing flexible and dynamic computing solutions for resourceconsuming tasks. Scientific Workflows are one of these kind of tasks, as they need a large amount of computational resources during certain periods of time. To provide the best infrastructure configuration for a workflow it is necessary to explore as many providers as possible taking into account different criteria like Quality of Service, pricing, response time, network latency, etc. Moreover, each one of these new resources must be tuned to provide the tools and dependencies required by each of the steps of the workflow. Working with different infrastructure providers, either public or private using their own concepts and terms, and with a set of heterogeneous applications requires a framework for integrating all the information about these elements. This work proposes semantic technologies for describing and integrating all the information about the different components of the overall system and a set of policies created by the user. Based on this information a scheduling process will be performed to generate an infrastructure configuration defining the set of virtual machines that must be run and the tools that must be deployed on them.

Challenges for the Multilingual Web of Data

The Web has witnessed an enormous growth in the amount of semantic information published in recent years. This growth has been stimulated to a large extent by the emergence of Linked Data. Although this brings us a big step closer to the vision of a Semantic Web, it also raises new issues such as the need for dealing with information expressed in different natural languages. Indeed, although the Web of Data can contain any kind of information in any language, it still lacks explicit mechanisms to automatically reconcile such information when it is expressed in different languages. This leads to situations in which data expressed in a certain language is not easily accessible to speakers of other languages. The Web of Data shows the potential for being extended to a truly multilingual web as vocabularies and data can be published in a language-independent fashion, while associated language-dependent (linguistic) information supporting the access across languages can be stored separately. In this sense, the multilingual Web of Data can be realized in our view as a layer of services and resources on top of the existing Linked Data infrastructure adding i) linguistic information for data and vocabularies in different languages, ii) mappings between data with labels in different languages, and iii) services to dynamically access and traverse Linked Data across different languages. In this article we present this vision of a multilingual Web of Data. We discuss challenges that need to be addressed to make this vision come true and discuss the role that techniques such as ontology localization, ontology mapping, and cross-lingual ontology-based information access and presentation will play in achieving this. Further, we propose an initial architecture and describe a roadmap that can provide a basis for the implementation of this vision.

Game Theory Models for Multi-Robot Patrolling of Infraestructures

Abstract This work is focused on the problem of performing multi‐robot patrolling for infrastructure security applications in order to protect a known environment at critical facilities. Thus, given a set of robots and a set of points of interest, the patrolling task consists of constantly visiting these points at irregular time intervals for security purposes. Current existing solutions for these types of applications are predictable and inflexible. Moreover, most of the previous centralized and deterministic solutions and only few efforts have been made to integrate dynamic methods. Therefore, the development of new dynamic and decentralized collaborative approaches in order to solve the aforementioned problem by implementing learning models from Game Theory. The model selected in this work that includes belief‐based and reinforcement models as special cases is called Experience‐Weighted Attraction. The problem has been defined using concepts of Graph Theory to represent the environment in order to work with such Game Theory techniques. Finally, the proposed methods have been evaluated experimentally by using a patrolling simulator. The results obtained have been compared with previous available