A methodology to measure coordination of business processes

Coordination of business processes is the management of dependencies where dependencies constrain how the tasks are performed. It has been traditionally done in an intuitive fashion, without paying much attention to the coordination load. Coordination load is being defined as the ratio between the time spent on coordination activities and the total task time. Previous efforts to understand and analyze coordination have resulted in mostly qualitative approaches to categorize and recommend coordination strategies. This research seeks to answer two questions: (1) How can we analyze process coordination problems to improve overall performance? (2) What guidance can we provide to reduce the coordination load of the process and consequently improve the organization's performance? Thus, this effort developed a quantitative measure for coordination load of business processes and a methodology to apply such measure. ^ This effort used a management simulation game to have a controlled laboratory environment enabling the manipulation of the task factors variability, analyzability, and interdependence to measure their impact on coordination load. The hypothesis was that the more variable, non-analyzable, and interdependent a process, the higher the coordination load, and that a higher coordination load would have a negative impact on performance. Coordination load was measured via the surrogate coordination time, and performance via profit. ^ A 22 x 31 full factorial design, with two replicates, was run to observe the impact on the variables coordination time and profit. Properly validated spreadsheets and questionnaires were used as data collection instruments for each scenario. The experimental results indicate that lower task analyzability (ρ=0.036) and higher task interdependence (ρ=0.000) lead to higher coordination load, and higher levels of task variability (ρ=0.049) lead to lower performance. However, contrary to the hypotheses postulated by this work, coordination load did not prove to be strong predictor of performance (correlation of -0.086). ^ These findings from the laboratory experiment and other lessons learned were incorporated to develop a quantitative measure, a tool (survey) to use to gather data for the variables in the measures, and a methodology to quantify coordination load of production business processes. The practicality of the methodology is demonstrated with an example.^

Investigating a career choice for nursing based on social cognitive career theory

Nursing shortages still exist in the U.S. so it is important to determine factors that influence decisions to pursue nursing as a career. This comparative, correlational research study revealed factors that may contribute to, or deter students from choosing nursing as a career. The purpose of this study was to determine factors that contribute to a career choice for nursing based on the concepts of social cognitive career theory (SCCT), self efficacy, outcome expectations, and personal goals, among senior high school students, final year nursing students, and first year nursing students. Based on the results strategies may be developed to recruit a younger pool of students to the nursing profession and to boost retention efforts among those who already made a career choice in nursing. Data were collected using a three part questionnaire developed by the researcher to obtain demographic information and data about the respondents' self efficacy, outcome expectations, and personal goals with regards to nursing as a career. Point bi-serial correlations were used to determine relationships between the variables. ANOVAs and ANCOVAs were computed to determine differences in self efficacy and outcome expectations, among the three groups. Additional descriptive data determined reasons for and against a choice for nursing as a career. Self efficacy and outcome expectations were significantly correlated to career choice among all three groups. The nursing students had higher self efficacy perceptions than the high school students. There were no significant differences in outcome expectations between the three groups. The main categories identified as reasons for choosing nursing as a career were; (a) caring, (b) career and educational advancement, (c) personal accomplishment, (d) proficiency and love of the medical field. Common categories identified for not choosing nursing as a career were; (a) responsibility, (b) liability, (c) lack of respect, and (d) low salary. Other categories regarding not choosing nursing as a career included; (a) the nursing program and (b) professional (c) alternate career choice options and (d) fear of sickness and death. Findings from this study support the tenets of SCCT and may be used to recruit and retain nurses and develop curricula.

Methodology to create cost estimation models for engineer-to-order operations

This research addresses the problem of cost estimation for product development in engineer-to-order (ETO) operations. An ETO operation starts the product development process with a product specification and ends with delivery of a rather complicated, highly customized product. ETO operations are practiced in various industries such as engineering tooling, factory plants, industrial boilers, pressure vessels, shipbuilding, bridges and buildings. ETO views each product as a delivery item in an industrial project and needs to make an accurate estimation of its development cost at the bidding and/or planning stage before any design or manufacturing activity starts. ^ Many ETO practitioners rely on an ad hoc approach to cost estimation, with use of past projects as reference, adapting them to the new requirements. This process is often carried out on a case-by-case basis and in a non-procedural fashion, thus limiting its applicability to other industry domains and transferability to other estimators. In addition to being time consuming, this approach usually does not lead to an accurate cost estimate, which varies from 30% to 50%. ^ This research proposes a generic cost modeling methodology for application in ETO operations across various industry domains. Using the proposed methodology, a cost estimator will be able to develop a cost estimation model for use in a chosen ETO industry in a more expeditious, systematic and accurate manner. ^ The development of the proposed methodology was carried out by following the meta-methodology as outlined by Thomann. Deploying the methodology, cost estimation models were created in two industry domains (building construction and the steel milling equipment manufacturing). The models are then applied to real cases; the cost estimates are significantly more accurate than the actual estimates, with mean absolute error rate of 17.3%. ^ This research fills an important need of quick and accurate cost estimation across various ETO industries. It differs from existing approaches to the problem in that a methodology is developed for use to quickly customize a cost estimation model for a chosen application domain. In addition to more accurate estimation, the major contributions are in its transferability to other users and applicability to different ETO operations. ^

A total quality management methodology for universities

This research document is motivated by the need for a systemic, efficient quality improvement methodology at universities. There exists no methodology designed for a total quality management (TQM) program in a university. The main objective of this study is to develop a TQM Methodology that enables a university to efficiently develop an integral total quality improvement (TQM) Plan. ^ Current research focuses on the need of improving the quality of universities, the study of the perceived best quality universities, and the measurement of the quality of universities through rankings. There is no evidence of research on how to plan for an integral quality improvement initiative for the university as a whole, which is the main contribution of this study. ^ This research is built on various reference TQM models and criteria provided by ISO 9000, Baldrige and Six Sigma; and educational accreditation criteria found in ABET and SACS. The TQM methodology is proposed by following a seven-step metamethodology. The proposed methodology guides the user to develop a TQM plan in five sequential phases: initiation, assessment, analysis, preparation and acceptance. Each phase defines for the user its purpose, key activities, input requirements, controls, deliverables, and tools to use. The application of quality concepts in education and higher education is particular; since there are unique factors in education which ought to be considered. These factors shape the quality dimensions in a university and are the main inputs to the methodology. ^ The proposed TQM Methodology is used to guide the user to collect and transform appropriate inputs to a holistic TQM Plan, ready to be implemented by the university. Different input data will lead to a unique TQM plan for the specific university at the time. It may not necessarily transform the university into a world-class institution, but aims to strive for stakeholder-oriented improvements, leading to a better alignment with its mission and total quality advancement. ^ The proposed TQM methodology is validated in three steps. First, it is verified by going through a test activity as part of the meta-methodology. Secondly, the methodology is applied to a case university to develop a TQM plan. Lastly, the methodology and the TQM plan both are verified by an expert group consisting of TQM specialists and university administrators. The proposed TQM methodology is applicable to any university at all levels of advancement, regardless of changes in its long-term vision and short-term needs. It helps to assure the quality of a TQM plan, while making the process more systemic, efficient, and cost effective. This research establishes a framework with a solid foundation for extending the proposed TQM methodology into other industries. ^

A methodology to select an enterprise resource planning system for a small or medium sized enterprise

Enterprise Resource Planning (ERP) systems are software programs designed to integrate the functional requirements, and operational information needs of a business. Pressures of competition and entry standards for participation in major manufacturing supply chains are creating greater demand for small business ERP systems. The proliferation of new offerings of ERP systems introduces complexity to the selection process to identify the right ERP business software for a small and medium-sized enterprise (SME). The selection of an ERP system is a process in which a faulty conclusion poses a significant risk of failure to SME’s. The literature reveals that there are still very high failure rates in ERP implementation, and that faulty selection processes contribute to this failure rate. However, the literature is devoid of a systematic methodology for the selection process for an ERP system by SME’s. This study provides a methodological approach to selecting the right ERP system for a small or medium-sized enterprise. The study employs Thomann’s meta-methodology for methodology development; a survey of SME’s is conducted to inform the development of the methodology, and a case study is employed to test, and revise the new methodology. The study shows that a rigorously developed, effective methodology that includes benchmarking experiences has been developed and successfully employed. It is verified that the methodology may be applied to the domain of users it was developed to serve, and that the test results are validated by expert users and stakeholders. Future research should investigate in greater detail the application of meta-methodologies to supplier selection and evaluation processes for services and software; additional research into the purchasing practices of small firms is clearly needed.^

Novel methodology for in situ carbon dioxide enrichment of benthic ecosystems

Future climate change will likely represent a major stress to shallow aquatic and coastal marine communities around the world. Most climate change research, particularly in regards to increased pCO2 and ocean acidification, relies on ex situ mesocosm experimentation, isolating target organisms from their environment. Such mesocosms allow for greater experimental control of some variables, but can often cause unrealistic changes in a variety of environmental factors, leading to “bottle effects.” Here we present an in situ technique of altering dissolved pCO2within nearshore benthic communities (e.g., macrophytes, algae, and/or corals) using submerged clear, open-top chambers. Our technique utilizes a flow-through design that replicates natural water flow conditions and minimizes caging effects. The clear, open-top design additionally ensures that adequate light reaches the benthic community. Our results show that CO2 concentrations and pH can be successfully manipulated for long durations within the open-top chambers, continuously replicating forecasts for the year 2100. Enriched chambers displayed an average 0.46 unit reduction in pH as compared with ambient chambers over a 6-month period. Additionally, CO2 and HCO3 – concentrations were all significantly higher within the enriched chambers. We discuss the advantages and disadvantages of this technique in comparison to other ex situ mesocosm designs used for climate change research.

A methodology to estimate time varying user responses to travel time and travel time reliability in a road pricing environment

Road pricing has emerged as an effective means of managing road traffic demand while simultaneously raising additional revenues to transportation agencies. Research on the factors that govern travel decisions has shown that user preferences may be a function of the demographic characteristics of the individuals and the perceived trip attributes. However, it is not clear what are the actual trip attributes considered in the travel decision- making process, how these attributes are perceived by travelers, and how the set of trip attributes change as a function of the time of the day or from day to day. In this study, operational Intelligent Transportation Systems (ITS) archives are mined and the aggregated preferences for a priced system are extracted at a fine time aggregation level for an extended number of days. The resulting information is related to corresponding time-varying trip attributes such as travel time, travel time reliability, charged toll, and other parameters. The time-varying user preferences and trip attributes are linked together by means of a binary choice model (Logit) with a linear utility function on trip attributes. The trip attributes weights in the utility function are then dynamically estimated for each time of day by means of an adaptive, limited-memory discrete Kalman filter (ALMF). The relationship between traveler choices and travel time is assessed using different rules to capture the logic that best represents the traveler perception and the effect of the real-time information on the observed preferences. The impact of travel time reliability on traveler choices is investigated considering its multiple definitions. It can be concluded based on the results that using the ALMF algorithm allows a robust estimation of time-varying weights in the utility function at fine time aggregation levels. The high correlations among the trip attributes severely constrain the simultaneous estimation of their weights in the utility function. Despite the data limitations, it is found that, the ALMF algorithm can provide stable estimates of the choice parameters for some periods of the day. Finally, it is found that the daily variation of the user sensitivities for different periods of the day resembles a well-defined normal distribution.

A developmental education program model for high -risk minority baccalaureate nursing students

The purpose of this study was to define and describe a Developmental Education Program Model for high-risk minority baccalaureate nursing students based upon perceived needs determined by nursing students and nursing faculty. The research examined differences between Black and Non-Black nursing students in level of importance of concerns and issues related to academic, financial, psycho-social and personal areas of student life; faculty perceptions of the differences between Black and Non-Black nursing students in the level of importance of concerns and issues related to academic, financial, psycho-social and personal areas of student life; and the difference between Black and Non-Black nursing faculty perceptions of level of importance of issues and concerns of academic, financial, psycho-social, and personal areas for Black nursing students. In this study two data collection methods were used, questionnaire and interview. The questionnaire was completed by all students and faculty. Black baccalaureate nursing students and nursing faculty were interviewed. The most significant differences were seen in the category of Personal Issues. Student identified concerns and issues related to both academic and health problems. Faculty identified the greatest differences in Academic Issues. The framework for the model which evolved out of the data uses needs from: (1) a whole person perspective (outcome oriented needs); (2) a programmatic perspective (input oriented needs); and (3) learning domain perspective (process oriented needs). ^

Flanerie: A post -reflexive mode of urban research inquiry

Urban ethnographic studies in social science usually proceed from within a pre-figured research framework that guides field activity and filters what is considered see-worthy and study-worthy to those phenomena which are in some way necessary for the fulfillment of specific research agendas. Reliance on formalized ethnographic research methods to explore the city, and the reflex to intellectualize that which is observed by using them, frequently leads to the neglect of much of what comprises the ethnographic richness of city-life through an overly-contemplative intellectuocentrism. ^ Flânerie, an avocational, proto-sociological ethnographic mode of urban exploration and observation originating in early-nineteenth-century Paris, is representative of an alternate approach to exploration and study of the city—one less subject to a compressed horizon of ethnographic experience. It affords insight into a broad range of phenomena taking place in interstitial urban space and time which often escape the instrumentally overly-determined gaze of professionalist research inquiry. ^ The present work addressed the fact that the concept of flânerie , though occasionally invoked in discussions of methodology in urban sociology and cultural studies, had not been subjected to a systematic attempt to relate it to the research methods of these disciplines. Though as a typological figure the flâneur is thought to have disappeared long ago, practices represented by the concept continue to be engaged in by persons inside and outside of academia who approach city life and social science with a perspective somewhat transcending the reified dichotomies of private-professional and art-and-science. This study transferred aspects of the experience of the city embodied in the flâneur to the realm of ethnographic urban studies and the building of grounded social theory, finding flânerie to be crucial to the development of a refined knowledge of urban life, and an important means by which previously overlooked social phenomena and silenced avenues of research inquiry might be exposed. ^ The conclusions reached found a “flâneuristic” approach to the city as being beneficial to research practice and the vitalization of urban ethnographic inquiry, by affording opportunities for exposure to, and immersion within, an expanded range of quotidian social phenomena that have frequently escaped the academicist gaze. ^

Capacity planning methodology for concurrent engineer -to -order operations

This research focuses on developing a capacity planning methodology for the emerging concurrent engineer-to-order (ETO) operations. The primary focus is placed on the capacity planning at sales stage. This study examines the characteristics of capacity planning in a concurrent ETO operation environment, models the problem analytically, and proposes a practical capacity planning methodology for concurrent ETO operations in the industry. A computer program that mimics a concurrent ETO operation environment was written to validate the proposed methodology and test a set of rules that affect the performance of a concurrent ETO operation. ^ This study takes a systems engineering approach to the problem and employs systems engineering concepts and tools for the modeling and analysis of the problem, as well as for developing a practical solution to this problem. This study depicts a concurrent ETO environment in which capacity is planned. The capacity planning problem is modeled into a mixed integer program and then solved for smaller-sized applications to evaluate its validity and solution complexity. The objective is to select the best set of available jobs to maximize the profit, while having sufficient capacity to meet each due date expectation. ^ The nature of capacity planning for concurrent ETO operations is different from other operation modes. The search for an effective solution to this problem has been an emerging research field. This study characterizes the problem of capacity planning and proposes a solution approach to the problem. This mathematical model relates work requirements to capacity over the planning horizon. The methodology is proposed for solving industry-scale problems. Along with the capacity planning methodology, a set of heuristic rules was evaluated for improving concurrent ETO planning. ^

The knowledge and use of critical thinking teaching strategies of faculty in associate degree nursing education programs

The purpose of this study was to determine the knowledge and use of critical thinking teaching strategies by full-time and part-time faculty in Associate Degree Nursing (ADN) programs. Sander's CTI (1992) instrument was adapted for this study and pilottested prior to the general administration to ADN faculty in Southeast Florida. This modified instrument, now termed the Burroughs Teaching Strategy Inventory (BTSI), returned reliability estimates (Cronbach alphas of .71, .74, and .82 for the three constructs) comparable to the original instrument. The BTSI was administered to 113 full-time and part-time nursing faculty in three community college nursing programs. The response rate was 92% for full-time faculty (n = 58) and 61 % for part-time faculty (n = 55). The majority of participants supported a combined definition of critical thinking in nursing which represented a composite of thinking skills that included reflective thinking, assessing alternative viewpoints, and the use of problem-solving. Full-time and part-time faculty used different teaching strategies. Fulltime faculty most often used multiple-choice exams and lecture while part-time faculty most frequently used discussion within their classes. One possible explanation for specific strategy choices and differences might be that full-time faculty taught predominately in theory classes where certain strategies would be more appropriate and part-time faculty taught predominately clinical classes. Both faculty types selected written nursing care plans as the second most effective critical thinking strategy. Faculty identified several strategies as being effective in teaching critical thinking. These strategies included discussion, case studies, higher order questioning, and concept analysis. These however, were not always the strategies that were used in either the classroom or clinical setting. Based on this study, the author recommends that if the profession continues to stress critical thinking as a vital component of practice, nursing faculty should receive education in appropriate critical teaching strategies. Both in-service seminars and workshops could be used to further the knowledge and use of critical thinking strategies by faculty. Qualitative research should be done to determine why nursing faculty use self-selected teaching strategies.

Research on the influence of behavioral forces that motivate trader behavior and sentiment- a prospect theory exegesis

This study focuses on empirical investigations and seeks implications by utilizing three different methodologies to test various aspects of trader behavior. The first methodology utilizes Prospect Theory to determine trader behavior during periods of extreme wealth contracting periods. Secondly, a threshold model to examine the sentiment variable is formulated and thirdly a study is made of the contagion effect and trader behavior. The connection between consumers' sense of financial well-being or sentiment and stock market performance has been studied at length. However, without data on actual versus experimental performance, implications based on this relationship are meaningless. The empirical agenda included examining a proprietary file of daily trader activities over a five-year period. Overall, during periods of extreme wealth altering conditions, traders "satisfice" rather than choose the "best" alternative. A trader's degree of loss aversion depends on his/her prior investment performance. A model that explains the behavior of traders during periods of turmoil is developed. Prospect Theory and the data file influenced the design of the model. Additional research included testing a model that permitted the data to signal the crisis through a threshold model. The third empirical study sought to investigate the existence of contagion caused by declining global wealth effects using evidence from the mining industry in Canada. Contagion, where a financial crisis begins locally and subsequently spreads elsewhere, has been studied in terms of correlations among similar regions. The results provide support for Prospect Theory in two out of the three empirical studies. The dissertation emphasizes the need for specifying precise, testable models of investors' expectations by providing tools to identify paradoxical behavior patterns. True enhancements in this field must include empirical research utilizing reliable data sources to mitigate data mining problems and allow researchers to distinguish between expectations-based and risk-based explanations of behavior. Through this type of research, it may be possible to systematically exploit "irrational" market behavior.

Investigando o cuidado em equipe de enfermagem em uma UBS da cidade do Natal-RN

On the health area, care is seen as an important concept for professionals. Recently there is a trend, the epistemological point of view, to think carefully as category allowing discuss and re (thinking) practices of humane health care. The objective of this study is to investigate the understanding of care in nursing staff in a Basic Health Unit (BHU) in the city of Natal. The participants were two nurses and two nursing technicians working on the BHU of Guarapes district, located on the west side of Natal - RN. As Theoretical support for data interpretation, was used the concept of care taking, using Heidegger’s theories as reference, through Ayre’s ideas. This is a qualitative research using autobiographical as a methodology. The methodological strategy approach used were focus group and individual interviews. The data were discussed by three angles: knowledge (concepts and theories behind the practical model), technical (the way to do), and ethics (values that bases practices) by hermeneutics Gadamer's dialectic. The results showed the necessity to expand the discussion on care, in practice the understanding of care seems to get narrower concerns with technical success by professionals. The care, as a meeting between beings, the desired humanized care, seems to be understood in parts in theory, but also distances itself from reality in professional practice.