A multi-modular second life hybrid battery energy storage system for utility grid applications

The modern grid system or the smart grid is likely to be populated with multiple distributed energy sources, e.g. wind power, PV power, Plug-in Electric Vehicle (PEV). It will also include a variety of linear and nonlinear loads. The intermittent nature of renewable energies like PV, wind turbine and increased penetration of Electric Vehicle (EV) makes the stable operation of utility grid system challenging. In order to ensure a stable operation of the utility grid system and to support smart grid functionalities such as, fault ride-through, frequency response, reactive power support, and mitigation of power quality issues, an energy storage system (ESS) could play an important role. A fast acting bidirectional energy storage system which can rapidly provide and absorb power and/or VARs for a sufficient time is a potentially valuable tool to support this functionality. Battery energy storage systems (BESS) are one of a range suitable energy storage system because it can provide and absorb power for sufficient time as well as able to respond reasonably fast. Conventional BESS already exist on the grid system are made up primarily of new batteries. The cost of these batteries can be high which makes most BESS an expensive solution. In order to assist moving towards a low carbon economy and to reduce battery cost this work aims to research the opportunities for the re-use of batteries after their primary use in low and ultra-low carbon vehicles (EV/HEV) on the electricity grid system. This research aims to develop a new generation of second life battery energy storage systems (SLBESS) which could interface to the low/medium voltage network to provide necessary grid support in a reliable and in cost-effective manner. The reliability/performance of these batteries is not clear, but is almost certainly worse than a new battery. Manufacturers indicate that a mixture of gradual degradation and sudden failure are both possible and failure mechanisms are likely to be related to how hard the batteries were driven inside the vehicle. There are several figures from a number of sources including the DECC (Department of Energy and Climate Control) and Arup and Cenex reports indicate anything from 70,000 to 2.6 million electric and hybrid vehicles on the road by 2020. Once the vehicle battery has degraded to around 70-80% of its capacity it is considered to be at the end of its first life application. This leaves capacity available for a second life at a much cheaper cost than a new BESS Assuming a battery capability of around 5-18kWhr (MHEV 5kWh - BEV 18kWh battery) and approximate 10 year life span, this equates to a projection of battery storage capability available for second life of >1GWhrs by 2025. Moreover, each vehicle manufacturer has different specifications for battery chemistry, number and arrangement of battery cells, capacity, voltage, size etc. To enable research and investment in this area and to maximize the remaining life of these batteries, one of the design challenges is to combine these hybrid batteries into a grid-tie converter where their different performance characteristics, and parameter variation can be catered for and a hot swapping mechanism is available so that as a battery ends it second life, it can be replaced without affecting the overall system operation. This integration of either single types of batteries with vastly different performance capability or a hybrid battery system to a grid-tie 3 energy storage system is different to currently existing work on battery energy storage systems (BESS) which deals with a single type of battery with common characteristics. This thesis addresses and solves the power electronic design challenges in integrating second life hybrid batteries into a grid-tie energy storage unit for the first time. This study details a suitable multi-modular power electronic converter and its various switching strategies which can integrate widely different batteries to a grid-tie inverter irrespective of their characteristics, voltage levels and reliability. The proposed converter provides a high efficiency, enhanced control flexibility and has the capability to operate in different operational modes from the input to output. Designing an appropriate control system for this kind of hybrid battery storage system is also important because of the variation of battery types, differences in characteristics and different levels of degradations. This thesis proposes a generalised distributed power sharing strategy based on weighting function aims to optimally use a set of hybrid batteries according to their relative characteristics while providing the necessary grid support by distributing the power between the batteries. The strategy is adaptive in nature and varies as the individual battery characteristics change in real time as a result of degradation for example. A suitable bidirectional distributed control strategy or a module independent control technique has been developed corresponding to each mode of operation of the proposed modular converter. Stability is an important consideration in control of all power converters and as such this thesis investigates the control stability of the multi-modular converter in detailed. Many controllers use PI/PID based techniques with fixed control parameters. However, this is not found to be suitable from a stability point-of-view. Issues of control stability using this controller type under one of the operating modes has led to the development of an alternative adaptive and nonlinear Lyapunov based control for the modular power converter. Finally, a detailed simulation and experimental validation of the proposed power converter operation, power sharing strategy, proposed control structures and control stability issue have been undertaken using a grid connected laboratory based multi-modular hybrid battery energy storage system prototype. The experimental validation has demonstrated the feasibility of this new energy storage system operation for use in future grid applications.

Influencing online grocery innovation:anti-choice as a trigger for activity fragmentation and multi-tasking

This paper reveals how activity fragmentation and multi-tasking become tools of consumer anti-choice in the online grocery sector: facilitated by new technology practices that positively encourage anti-choice. This is demonstrated through five long-term ethnographic case studies of households in the Portsmouth area of England. All the respondents made some form of conscious effort to minimize the amount of time they spent in ‘big box’ grocery stores. They spend more time at home in planning, searching, socializing online, cumulating and fulfilling internet orders than if they had visited a store: something that all could easily do. The findings suggest the need for constant innovation by internet grocers if they are to remain in tune with dynamic consumer lifestyles and advances in technology. Examples of upcoming technologies requiring retailers to re-think their internet strategies are discussed in view of the possibilities offered by activity fragmentation and multi-tasking.

A nested Petri net framework for modeling and analyzing multi-agent systems

In the past two decades, multi-agent systems (MAS) have emerged as a new paradigm for conceptualizing large and complex distributed software systems. A multi-agent system view provides a natural abstraction for both the structure and the behavior of modern-day software systems. Although there were many conceptual frameworks for using multi-agent systems, there was no well established and widely accepted method for modeling multi-agent systems. This dissertation research addressed the representation and analysis of multi-agent systems based on model-oriented formal methods. The objective was to provide a systematic approach for studying MAS at an early stage of system development to ensure the quality of design. ^ Given that there was no well-defined formal model directly supporting agent-oriented modeling, this study was centered on three main topics: (1) adapting a well-known formal model, predicate transition nets (PrT nets), to support MAS modeling; (2) formulating a modeling methodology to ease the construction of formal MAS models; and (3) developing a technique to support machine analysis of formal MAS models using model checking technology. PrT nets were extended to include the notions of dynamic structure, agent communication and coordination to support agent-oriented modeling. An aspect-oriented technique was developed to address the modularity of agent models and compositionality of incremental analysis. A set of translation rules were defined to systematically translate formal MAS models to concrete models that can be verified through the model checker SPIN (Simple Promela Interpreter). ^ This dissertation presents the framework developed for modeling and analyzing MAS, including a well-defined process model based on nested PrT nets, and a comprehensive methodology to guide the construction and analysis of formal MAS models.^

IRAS 00183-7111: ALMA and X-ray view of an ultra luminous infrared galaxy

The aim of this Thesis work is to study the multi-frequency properties of the Ultra Luminous Infrared Galaxy (ULIRG) IRAS 00183-7111 (I00183) at z = 0.327, connecting ALMA sub-mm/mm observations with those at high energies in order to place constraints on the properties of its central power source and verify whether the gas traced by the CO may be responsible for the obscuration observed in X-rays. I00183 was selected from the so-called Spoon diagnostic diagram (Spoon et al. 2007) for mid-infrared spectra of infrared galaxies based on the equivalent width of the 6.2 μm Polycyclic Aromatic Hydrocarbon (PAH) emission feature versus the 9.7 μm silicate strength. Such features are a powerful tool to investigate the contribution of star formation and AGN activity in this class of objects. I00183 was selected from the top-left region of the plot where the most obscured sources, characterized by a strong Si absorption feature, are located. To link the sub-mm/mm to the X-ray properties of I00183, ALMA archival Cycle 0 data in Band 3 (87 GHz) and Band 6 (270 GHz) have been calibrated and analyzed, using CASA software. ALMA Cycle 0 was the Early Science program for which data reprocessing is strongly suggested. The main work of this Thesis consisted in reprocessing raw data to provide an improvement with respect to the available archival products and results, which were obtained using standard procedures. The high-energy data consists of Chandra, XMM-Newton and NuSTAR observations which provide a broad coverage of the spectrum in the energy range 0.5 − 30 keV. Chandra and XMM archival data were used, with an exposure time of 22 and 22.2 ks, respectively; their reduction was carried out using CIAO and SAS software. The 100 ks NuSTAR are still private and the spectra were obtained by courtesy of the PI (K. Iwasawa). A detailed spectral analysis was done using XSPEC software; the spectral shape was reproduced starting from simple phenomenological models, and then more physical models were introduced to account for the complex mechanisms that involve this source. In Chapter 1, an overview of the scientific background is discussed, with a focus on the target, I00183, and the Spoon diagnostic diagram, from which it was originally selected. In Chapter 2, the basic principles of interferometry are briefly introduced, with a description of the calibration theory applied to interferometric observations. In Chapter 3, ALMA and its capabilities, both current and future, are shown, explaining also the complex structure of the ALMA archive. In Chapter 4, the calibration of ALMA data is presented and discussed, showing also the obtained imaging products. In Chapter 5, the analysis and discussion of the main results obtained from ALMA data is presented. In Chapter 6, the X-ray observations, data reduction and spectral analysis are reported, with a brief introduction to the basic principle of X-ray astronomy and the instruments from which the observations were carried out. Finally, the overall work is summarized, with particular emphasis on the main obtained results and the possible future perspectives.

Architettura cloud per lo sviluppo multi-piattaforma di Sistemi Operativi: Principi generali

Vengono analizzate le strategie di rilascio delle principali Distribuzioni Linux e i metodi per la compilazione automatizzata del software. Si propone quindi una nuova metodologia sia per il rilascio di media installabili e sia per la pacchettizzazione. Sfruttando le tecnologie del campo DevOps, si introduce quindi un alto grado di scalabilità anche in ambienti Cloud, grazie anche alla riproducibilità di ogni componente dell'infrastruttura proposta. Vedremo quindi come questo approccio aumenta l'automatizzazione nei cicli produttivi per la realizzazione della Distribuzione Sabayon Linux e per la definizione di un'infrastruttura automatizzata attualmente in production.

Architettura cloud per lo sviluppo multi-piattaforma di Sistemi Operativi: Applicazioni specifiche

Il mondo dell’Internet of Things e del single board computing sono settori in forte espansione al giorno d’oggi e le architetture ARM sono, al momento, i dominatori in questo ambito. I sistemi operativi e i software si stanno evolvendo per far fronte a questo cambiamento e ai nuovi casi d’uso che queste tecnologie introducono. In questa tesi ci occuperemo del porting della distribuzione Linux Sabayon per queste architetture, la creazione di un infrastruttura per il rilascio delle immagini e la compilazione dei pacchetti software.

Integrazione sistemi a eventi e multi-agente: Kafka, TuCSoN e JADE

La tesi esplora le problematiche relative all'integrazione di tecnologie per lo sviluppo di sistemi multi-agente e tecnologie per lo sviluppo di sistemi di comunicazione ad eventi. In particolare è stata posta l'attenzione sui concetti condivisi da entrambe le tecnologie e su come sia possibile realizzare l'integrazione preservando i principi fondamentali delle due tipologie di sistemi, tramite l'implementazione di un'astrazione di coordinazione oggettiva. Inoltre viene mostrato un esempio di integrazione tra JADE, TuCSoN e Kafka, tramite un caso di studio che permette di utilizzare i tre modelli di coordinazione offerti da questi framework in un unico sistema multi-agente.

Deterministic and probabilistic verification of multi-model meteorological forecasts on the subseasonal timescale

In questo studio, un multi-model ensemble è stato implementato e verificato, seguendo una delle priorità di ricerca del Subseasonal to Seasonal Prediction Project (S2S). Una regressione lineare è stata applicata ad un insieme di previsioni di ensemble su date passate, prodotte dai centri di previsione mensile del CNR-ISAC e ECMWF-IFS. Ognuna di queste contiene un membro di controllo e quattro elementi perturbati. Le variabili scelte per l'analisi sono l'altezza geopotenziale a 500 hPa, la temperatura a 850 hPa e la temperatura a 2 metri, la griglia spaziale ha risoluzione 1 ◦ × 1 ◦ lat-lon e sono stati utilizzati gli inverni dal 1990 al 2010. Le rianalisi di ERA-Interim sono utilizzate sia per realizzare la regressione, sia nella validazione dei risultati, mediante stimatori nonprobabilistici come lo scarto quadratico medio (RMSE) e la correlazione delle anomalie. Successivamente, tecniche di Model Output Statistics (MOS) e Direct Model Output (DMO) sono applicate al multi-model ensemble per ottenere previsioni probabilistiche per la media settimanale delle anomalie di temperatura a 2 metri. I metodi MOS utilizzati sono la regressione logistica e la regressione Gaussiana non-omogenea, mentre quelli DMO sono il democratic voting e il Tukey plotting position. Queste tecniche sono applicate anche ai singoli modelli in modo da effettuare confronti basati su stimatori probabilistici, come il ranked probability skill score, il discrete ranked probability skill score e il reliability diagram. Entrambe le tipologie di stimatori mostrano come il multi-model abbia migliori performance rispetto ai singoli modelli. Inoltre, i valori più alti di stimatori probabilistici sono ottenuti usando una regressione logistica sulla sola media di ensemble. Applicando la regressione a dataset di dimensione ridotta, abbiamo realizzato una curva di apprendimento che mostra come un aumento del numero di date nella fase di addestramento non produrrebbe ulteriori miglioramenti.

Combined analysis of variation in core, accessory and regulatory genome regions provides a super-resolution view into the evolution of bacterial populations

The use of whole-genome phylogenetic analysis has revolutionized our understanding of the evolution and spread of many important bacterial pathogens due to the high resolution view it provides. However, the majority of such analyses do not consider the potential role of accessory genes when inferring evolutionary trajectories. Moreover, the recently discovered importance of the switching of gene regulatory elements suggests that an exhaustive analysis, combining information from core and accessory genes with regulatory elements could provide unparalleled detail of the evolution of a bacterial population. Here we demonstrate this principle by applying it to a worldwide multi-host sample of the important pathogenic E. coli lineage ST131. Our approach reveals the existence of multiple circulating subtypes of the major drug–resistant clade of ST131 and provides the first ever population level evidence of core genome substitutions in gene regulatory regions associated with the acquisition and maintenance of different accessory genome elements.

Studio multi-banda dal sub-parsec al kilo-parsec dell'emissione del getto nella radio galassia IC 1531

In questo lavoro di tesi si presenta il primo studio multi-scala e multi-frequenza focalizzato sul getto della radiogalassia IC1531 (z=0.026) con i satelliti Chandra, XMM-Newton e Fermi con l’obiettivo di tracciarne l’emissione alle alte energie; definire i processi radiativi responsabili dell’emissione osservata e stimare i principali parametri fisici del getto; stimare l’energetica del getto alle diverse scale. La sorgente è stata selezionata per la presenza di un getto esteso (≈5’’) osservato in radio e ai raggi X, inoltre, era riportata come possibile controparte della sorgente gamma 3FGLJ0009.6-3211 presente nel terzo catalogo Fermi (3FGL). La presenza di emissione ai raggi γ, confermata dal nostro studio, è importante per la modellizzazione della SED della regione nucleare. L’emissione X del nucleo è dominata da una componente ben riprodotta da una legge di potenza con indice spettrale Γ=2.2. L’analisi dell’emissione in banda gamma ha evidenziato una variabilità su scale di 5 giorni, dalla quale è stato possibile stimare le dimensioni delle regione emittente. Inoltre viene presentato lo studio della distribuzione spettrale dell’energia della regione nucleare di IC 1531 dalla banda radio ai raggi γ. I modelli ci permettono di determinare la natura dell’emissione gamma e stimare la potenza cinetica del getto a scale del su-pc. Gli osservabili sono stati utilizzati per ottenere le stime sui parametri del modello. La modellizzazione così ottenuta ha permesso di stimare i parametri fisici del getto e la potenza trasportata del getto a scale del sub-pc. Le stime a 151MHz suggerisco che il getto abbia basse velocita' (Γ≤7) e angolo di inclinazione rispetto alla linea di vista 10°<ϑ<20°; nel complesso, il trasporto di energia da parte del getto risulta efficiente. L’origine dell’emissione X del getto a grandi scale è consistente con un’emissione di sincrotrone, che conferma la classificazione di IC1531 come sorgente di bassa potenza MAGN.

Team Member’s Centrality, Cohesion, Conflict, and Performance in Multi-University Geographically Distributed Project Teams

This study examined team processes and outcomes among 12 multi-university distributed project teams from 11 universities during its early and late development stages over a 14-month project period. A longitudinal model of team interaction is presented and tested at the individual level to consider the extent to which both formal and informal network connections—measured as degree centrality—relate to changes in team members’ individual perceptions of cohesion and conflict in their teams, and their individual performance as a team member over time. The study showed a negative network centrality-cohesion relationship with significant temporal patterns, indicating that as team members perceive less degree centrality in distributed project teams, they report more team cohesion during the last four months of the project. We also found that changes in team cohesion from the first three months (i.e., early development stage) to the last four months (i.e., late development stage) of the project relate positively to changes in team member performance. Although degree centrality did not relate significantly to changes in team conflict over time, a strong inverse relationship was found between changes in team conflict and cohesion, suggesting that team conflict emphasizes a different but related aspect of how individuals view their experience with the team process. Changes in team conflict, however, did not relate to changes in team member performance. Ultimately, we showed that individuals, who are less central in the network and report higher levels of team cohesion, performed better in distributed teams over time.

Elaborazione di un modello di simulazione per una rete di trasporto multi-modale

Questo lavoro di tesi si prefigge l’obiettivo di simulare il trasporto di organi destinati a trapianto sul territorio nazionale italiano. Lo scopo della simulazione è mettere in luce le criticità e le eventuali soluzioni alternative in modo da raggiungere un duplice obiettivo: la certezza di portare a compimento il trasporto da un ospedale ad un altro entro i tempi clinici necessari affinché l’organo sia ancora utilizzabile e la riduzione dei costi del trasporto, che negli ultimi anni si sono rivelati elevati a causa del ricorso frequente a voli di Stato. Nella prima parte del lavoro viene delineato il problema e le necessità di ottimizzazione della rete, dopodiché si illustra il modello creato per simulare la situazione di as-is ed infine si espone il modello da utilizzare in futuro, dove si prevedono i tempi futuri di percorrenza. Per la modellazione della situazione attuale sono stati utilizzati due livelli di dettaglio diversi, uno che si basa sulla suddivisione dei trapianti in ingresso e uscita da una regione specifica e uno che approfondisce ulteriormente la rete modellando gli spostamenti di città in città. I modelli predittivi presentati sono due, uno che considera tempi predittivi deterministici e uno che considera tempi stocastici. Dopo ciascuna modellazione vengono esposti i risultati e le statistiche più significative; vengono infine messi in evidenza gli aspetti critici e gli sviluppi futuri della simulazione. Il software scelto per creare e simulare il trasporto degli organi sulla rete è Arena.

Design Without Borders: A Multi-Everything Masters

Design is increasingly a global activity: addressing issues that challenge and affect people and populations other than our own, involving stakeholders from many cultures, realized through borderless networks of knowledge, services, materials, manufacturing and distribution. There is an appetite among graduates, especially in design and engineering, to broaden horizons and raise ambitions, to tackle big issues through innovation to bring about life-changing or world-changing impact. Employers demand such thinkers and doers: culturally attuned, multidisciplinary and T-shaped, unafraid to shake things up. In 2013, twelve postgraduates embarked on a new joint Masters course in London; students from eight different nations, studying together in three capital cities over two years. This programme is a collaboration between four centres of academic excellence in UK, USA and Japan; these students soon become its first graduating cohort, having experienced differing teaching styles, perspectives and specialisms around design, technology and innovation from four world-class institutions; immersion in three very different cultures; collaboration with students and faculty from many diverse disciplines and cultures; forming friendships and networks spanning the globe. This paper outlines the rationale and philosophy of the course, the challenges in its realisation and development so far, and its likely future evolution.

Likelihood-Based Inference for Partially Observed Multi-Type Markov Branching Processes

Thesis (Ph.D.)--University of Washington, 2016-08

Information and Communication Technologies (ICT) to Improve Prescription Appropriateness and Therapy Adherence in the Multi-morbid Elderly

Multimorbidity patients pose severe challenges to which information and communication technology (ICT) can help patients and doctors to answer with effective and efficient care.