807 resultados para Moving cochannel sources
Resumo:
We propose and analyze a simple mathematical model for susceptible prey (S)–infected prey (I)–predator (P) interaction, where the susceptible prey population (S) is infected directly from external sources as well as through contact with infected class (I) and the predator completely avoids consuming the infected prey. The model is analyzed to obtain different thresholds of the key parameters under which the system exhibits stability around the biologically feasible equilibria. Through numerical simulations we display the effects of external infection and the infection through contact on the system dynamics in the absence as well as in the presence of the predator. We compare the system dynamics when infection occurs only through contact, with that when it occurs through contact and external sources. Our analysis demonstrates that under a disease-selective predation, stability and oscillations of the system is determined by two key parameters: the external infection rate and the force of infection through contact. Due to the introduction of external infection, the predator and the prey population show limit-cycle oscillations over a range parametric values. We suggest that while predicting the dynamics of such an eco-epidemiological system, the modes of infection and the infection rates might be carefully investigated.
Resumo:
Total phosphorus (TP) and soluble reactive phosphorus (SRP) loads to watercourses of the River Basin Districts (RBDs) of Great Britain (GB) were estimated using inventories of industrial P loads and estimates of P loads from sewage treatment works and diffuse P loads calculated using region-specific export coefficients for particular land cover classes combined with census data for agricultural stocking densities and human populations. The TP load to GB waters was estimated to be 60 kt yr(-1), of which households contributed 73, agriculture contributed 20, industry contributed 3, and 4 came from background sources. The SRP load to GB waters was estimated to be 47 kt yr(-1), of which households contributed 78, agriculture contributed 13, industry contributed 4, and 6 came from background Sources. The 'average' area-normalized TP and SRP loads to GB waters approximated 2.4 kg ha(-1) yr(-1) and 1.8 kg ha(-1) yr(-1), respectively. A consideration of uncertainties in the data contributing to these estimates suggested that the TP load to GB waters might lie between 33 and 68 kt yr(-1), with agriculture contributing between 10 and 28 of the TP load. These estimates are consistent with recent appraisals of annual TP and SRP loads to GB coastal waters and area-normalized TP loads from their catchments. Estimates of the contributions of RBDs to these P loads were consistent with the geographical distribution of P concentrations in GB rivers and recent assessments of surface waters at risk from P Pollution.
Resumo:
This review examines recent evidence linking exposure to aluminium with the aetiology of breast cancer. The human population is exposed to aluminium throughout daily life including through diet, application of antiperspirants, use of antacids and vaccination. Aluminium has now been measured in a range of human breast structures at higher levels than in blood serum and experimental evidence suggests that the tissue concentrations measured have the potential to adversely influence breast epithelial cells including generation of genomic instability, induction of anchorage-independent proliferation and interference in oestrogen action. The presence of aluminium in the human breast may also alter the breast microenvironment causing disruption to iron metabolism, oxidative damage to cellular components, inflammatory responses and alterations to the motility of cells. The main research need is now to investigate whether the concentrations of aluminium measured in the human breast can lead in vivo to any of the effects observed in cells in vitro and this would be aided by the identification of biomarkers specific for aluminium action.
Resumo:
Understanding the sources of systematic errors in climate models is challenging because of coupled feedbacks and errors compensation. The developing seamless approach proposes that the identification and the correction of short term climate model errors have the potential to improve the modeled climate on longer time scales. In previous studies, initialised atmospheric simulations of a few days have been used to compare fast physics processes (convection, cloud processes) among models. The present study explores how initialised seasonal to decadal hindcasts (re-forecasts) relate transient week-to-month errors of the ocean and atmospheric components to the coupled model long-term pervasive SST errors. A protocol is designed to attribute the SST biases to the source processes. It includes five steps: (1) identify and describe biases in a coupled stabilized simulation, (2) determine the time scale of the advent of the bias and its propagation, (3) find the geographical origin of the bias, (4) evaluate the degree of coupling in the development of the bias, (5) find the field responsible for the bias. This strategy has been implemented with a set of experiments based on the initial adjustment of initialised simulations and exploring various degrees of coupling. In particular, hindcasts give the time scale of biases advent, regionally restored experiments show the geographical origin and ocean-only simulations isolate the field responsible for the bias and evaluate the degree of coupling in the bias development. This strategy is applied to four prominent SST biases of the IPSLCM5A-LR coupled model in the tropical Pacific, that are largely shared by other coupled models, including the Southeast Pacific warm bias and the equatorial cold tongue bias. Using the proposed protocol, we demonstrate that the East Pacific warm bias appears in a few months and is caused by a lack of upwelling due to too weak meridional coastal winds off Peru. The cold equatorial bias, which surprisingly takes 30 years to develop, is the result of an equatorward advection of midlatitude cold SST errors. Despite large development efforts, the current generation of coupled models shows only little improvement. The strategy proposed in this study is a further step to move from the current random ad hoc approach, to a bias-targeted, priority setting, systematic model development approach.
Resumo:
Enterprise Architecture (EA) has been recognised as an important tool in modern business management for closing the gap between strategy and its execution. The current literature implies that for EA to be successful, it should have clearly defined goals. However, the goals of different stakeholders are found to be different, even contradictory. In our explorative research, we seek an answer to the questions: What kind of goals are set for the EA implementation? How do the goals evolve during the time? Are the goals different among stakeholders? How do they affect the success of EA? We analysed an EA pilot conducted among eleven Finnish Higher Education Institutions (HEIs) in 2011. The goals of the pilot were gathered from three different stages of the pilot: before the pilot, during the pilot, and after the pilot, by means of a project plan, interviews during the pilot and a questionnaire after the pilot. The data was analysed using qualitative and quantitative methods. Eight distinct goals were recognised by the coding: Adopt EA Method, Build Information Systems, Business Development, Improve Reporting, Process Improvement, Quality Assurance, Reduce Complexity, and Understand the Big Picture. The success of the pilot was analysed statistically using the scale 1-5. Results revealed that goals set before the pilot were very different from those mentioned during the pilot, or after the pilot. Goals before the pilot were mostly related to expected benefits from the pilot, whereas the most important result was to adopt the EA method. Results can be explained by possibly different roles of respondents, which in turn were most likely caused by poor communication. Interestingly, goals mentioned by different stakeholders were not limited to their traditional areas of responsibility. For example, in some cases Chief Information Officers' goals were Quality Assurance and Process Improvement, whereas managers’ goals were Build Information Systems and Adopt EA Method. This could be a result of a good understanding of the meaning of EA, or stakeholders do not regard EA as their concern at all. It is also interesting to notice that regardless of the different perceptions of goals among stakeholders, all HEIs felt the pilot to be successful. Thus the research does not provide support to confirm the link between clear goals and success.
Resumo:
Mineral dust aerosols in the atmosphere have the potential to affect the global climate by influencing the radiative balance of the atmosphere and the supply of micronutrients to the ocean. Ice and marine sediment cores indicate that dust deposition from the atmosphere was at some locations 2–20 times greater during glacial periods, raising the possibility that mineral aerosols might have contributed to climate change on glacial-interglacial time scales. To address this question, we have used linked terrestrial biosphere, dust source, and atmospheric transport models to simulate the dust cycle in the atmosphere for current and last glacial maximum (LGM) climates. We obtain a 2.5-fold higher dust loading in the entire atmosphere and a twenty-fold higher loading in high latitudes, in LGM relative to present. Comparisons to a compilation of atmospheric dust deposition flux estimates for LGM and present in marine sediment and ice cores show that the simulated flux ratios are broadly in agreement with observations; differences suggest where further improvements in the simple dust model could be made. The simulated increase in high-latitude dustiness depends on the expansion of unvegetated areas, especially in the high latitudes and in central Asia, caused by a combination of increased aridity and low atmospheric [CO2]. The existence of these dust source areas at the LGM is supported by pollen data and loess distribution in the northern continents. These results point to a role for vegetation feedbacks, including climate effects and physiological effects of low [CO2], in modulating the atmospheric distribution of dust.
Resumo:
Oral nutritional supplement drinks (ONS) are beverages high in dairy proteins that are prescribed to individuals at risk of malnutrition. Consumption of ONS is poor in elderly care facilities, with patients commenting that the sensory attributes of these drinks reduce their enjoyment and willingness to consume. Mouth drying is an attribute of ONS found to build with repeated consumption, which may further limit liking of these products. This study investigated the sources of drying sensations by sequential profiling, with a trained sensory panel rating a range of model milk systems and ONS over repeated sips and during after-effects. Sequential profiling found that fortification of milk with both caseinate and whey protein concentrate significantly increased the perception of mouth drying over repeated consumption, increasing by between 35 and 85% over consumption of 40mL. Enrichment of ONS with either whey protein concentrate or milk protein concentrate to a total protein content of 8.7% (wt/wt) resulted in whey and casein levels of 4.3:4.4% and 1.7:7.0% respectively. The product higher in whey protein was substantially more mouth drying, implying that whey proteins may be the most important contributor to mouth drying in ONS. However, efforts to mask mouth drying of protein-fortified milk by increasing sweetness or fat level were unsuccessful at the levels tested. Increasing the viscosity of protein-fortified milk led to a small but significant reduction in mouth drying. However, this approach was not successful when tested within complete ONS. Further analysis is required into the mechanism of protein-derived mouth drying to mask negative sensations and improve the enjoyment and consumption of protein-rich ONS.
Resumo:
Ascaris suum is one of the most prevalent nematode parasites in pigs and causes significant economic losses, and also serves as a good model for A. lumbricoides, the large roundworm of humans that is ubiquitous in developing countries and causes malnutrition, stunted growth and compromises immunity to other pathogens. New treatment options for Ascaris infections are urgently needed, to reduce reliance on the limited number of synthetic anthelmintic drugs. In areas where Ascaris infections are common, ethno-pharmacological practices such as treatment with natural plant extracts are still widely employed. However, scientific validation of these practices and identification of the active compounds are lacking, although observed effects are often ascribed to plant secondary metabolites such as tannins. Here, we extracted, purified and characterised a wide range of condensed tannins from diverse plant sources and investigated anthelmintic effects against A. suum in vitro. We show that condensed tannins can have potent, direct anthelmintic effects against A. suum, as evidenced by reduced migratory ability of newly hatched third-stage larvae and reduced motility and survival of fourth-stage larvae recovered from pigs. Transmission electron microscopy showed that CT caused significant damage to the cuticle and digestive tissues of the larvae. Furthermore, we provide evidence that the strength of the anthelmintic effect is related to the polymer size of the tannin molecule. Moreover, the identity of the monomeric structural units of tannin polymers may also have an influence as gallocatechin and epigallocatechin monomers exerted significant anthelmintic activity whereas catechin and epicatechin monomers did not. Therefore, our results clearly document direct anthelmintic effects of condensed tannins against Ascaris and encourage further in vivo investigation to determine optimal strategies for the use of these plant compounds for the prevention and/or treatment of ascariosis.
Resumo:
The spread and rapid uptake of mobile telephony in Sub-Saharan Africa has highlighted the potential role of Information Communication Technologies in improving market participation and welfare outcomes for farm producers in agricultural produce markets. This article explores the influence of different sources of information and transmission technologies on the quantum and reliability of market information flowing to farm producers, based on a survey of farm households in northern Ghana. Our results suggest that the principal role of radio broadcasts and mobile telephony is in providing a broader knowledge of markets by enhancing the quantum of market information flowing to farm producers. They do not, however, appear to have a significant impact on the quality/reliability of price information obtained by farmers for making marketing decisions. Information sources appear to be the chief determinant of the reliability of price information, with price information obtained from extension agents being the most credible. Our results provide some useful insights for the design and implementation of Market Information Systems aimed at encouraging market participation by rural farm producers in agricultural markets.
Resumo:
The multicomponent nonideal gas lattice Boltzmann model by Shan and Chen (S-C) is used to study the immiscible displacement in a sinusoidal tube. The movement of interface and the contact point (contact line in three-dimension) is studied. Due to the roughness of the boundary, the contact point shows "stick-slip" mechanics. The "stick-slip" effect decreases as the speed of the interface increases. For fluids that are nonwetting, the interface is almost perpendicular to the boundaries at most time, although its shapes at different position of the tube are rather different. When the tube becomes narrow, the interface turns a complex curves rather than remains simple menisci. The velocity is found to vary considerably between the neighbor nodes close to the contact point, consistent with the experimental observation that the velocity is multi-values on the contact line. Finally, the effect of three boundary conditions is discussed. The average speed is found different for different boundary conditions. The simple bounce-back rule makes the contact point move fastest. Both the simple bounce-back and the no-slip bounce-back rules are more sensitive to the roughness of the boundary in comparison with the half-way bounce-back rule. The simulation results suggest that the S-C model may be a promising tool in simulating the displacement behaviour of two immiscible fluids in complex geometry.
Resumo:
Using data from the EISCAT (European Incoherent Scatter) VHF and CUTLASS (Co-operative UK Twin- Located Auroral Sounding System) HF radars, we study the formation of ionospheric polar cap patches and their relationship to the magnetopause reconnection pulses identified in the companion paper by Lockwood et al. (2005). It is shown that the poleward-moving, high-concentration plasma patches observed in the ionosphere by EISCAT on 23 November 1999, as reported by Davies et al. (2002), were often associated with corresponding reconnection rate pulses. However, not all such pulses generated a patch and only within a limited MLT range (11:00–12:00 MLT) did a patch result from a reconnection pulse. Three proposed mechanisms for the production of patches, and of the concentration minima that separate them, are analysed and evaluated: (1) concentration enhancement within the patches by cusp/cleft precipitation; (2) plasma depletion in the minima between the patches by fast plasma flows; and (3) intermittent injection of photoionisation-enhanced plasma into the polar cap. We devise a test to distinguish between the effects of these mechanisms. Some of the events repeat too frequently to apply the test. Others have sufficiently long repeat periods and mechanism (3) is shown to be the only explanation of three of the longer-lived patches seen on this day. However, effect (2) also appears to contribute to some events. We conclude that plasma concentration gradients on the edges of the larger patches arise mainly from local time variations in the subauroral plasma, via the mechanism proposed by Lockwood et al. (2000).
Resumo:
In the resource-based view, organisations are represented by the sum of their physical, human and organisational assets, resources and capabilities. Operational capabilities maintain the status quo and allow an organisation to execute their existing business. Dynamic capabilities, otherwise, allow an organisation to change this status quo including a change of the operational ones. Competitive advantage, in this context, is an effect of continuously developing and reconfiguring these firm-specific assets through dynamic capabilities. Deciding where and how to source the core operational capabilities is a key success factor. Furthermore, developing its dynamic capabilities allows an organisation to effectively manage change its operational capabilities. Many organisations are asserted to have a high dependency on - as well as a high benefit from - the use of information technology (IT), making it a crucial and overarching resource. Furthermore, the IT function is assigned the role as a change enabler and so IT sourcing affects the capability of managing business change. IT sourcing means that organisations need to decide how to source their IT capabilities. Outsourcing of parts of the IT function will also outsource some of the IT capabilities and therefore some of the business capabilities. As a result, IT sourcing has an impact on the organisation's capabilities and consequently on the business success. And finally, a turbulent and fast moving business environment challenges organisations to effectively and efficiently managing business change. Our research builds on the existing theory of dynamic and operational capabilities by considering the interdependencies between the dynamic capabilities of business change and IT sourcing. Further it examines the decision-making oversight of these areas as implemented through IT governance. We introduce a new conceptual framework derived from the existing theory and extended through an illustrative case study conducted in a German bank. Under a philosophical paradigm of constructivism, we collected data from eight semi-structured interviews and used additional sources of evidence in form of annual accounts, strategy papers and IT benchmark reports. We applied an Interpretative Phenomenological Analysis (IPA), which emerged the superordinate themes for our tentative capabilities framework. An understanding of these interdependencies enables scholars and professionals to improve business success through effectively managing business change and evaluating the impact of IT sourcing decisions on the organisation's operational and dynamic capabilities.
Resumo:
This study evaluates model-simulated dust aerosols over North Africa and the North Atlantic from five global models that participated in the Aerosol Comparison between Observations and Models phase II model experiments. The model results are compared with satellite aerosol optical depth (AOD) data from Moderate Resolution Imaging Spectroradiometer (MODIS), Multiangle Imaging Spectroradiometer (MISR), and Sea-viewing Wide Field-of-view Sensor, dust optical depth (DOD) derived from MODIS and MISR, AOD and coarse-mode AOD (as a proxy of DOD) from ground-based Aerosol Robotic Network Sun photometer measurements, and dust vertical distributions/centroid height from Cloud Aerosol Lidar with Orthogonal Polarization and Atmospheric Infrared Sounder satellite AOD retrievals. We examine the following quantities of AOD and DOD: (1) the magnitudes over land and over ocean in our study domain, (2) the longitudinal gradient from the dust source region over North Africa to the western North Atlantic, (3) seasonal variations at different locations, and (4) the dust vertical profile shape and the AOD centroid height (altitude above or below which half of the AOD is located). The different satellite data show consistent features in most of these aspects; however, the models display large diversity in all of them, with significant differences among the models and between models and observations. By examining dust emission, removal, and mass extinction efficiency in the five models, we also find remarkable differences among the models that all contribute to the discrepancies of model-simulated dust amount and distribution. This study highlights the challenges in simulating the dust physical and optical processes, even in the best known dust environment, and stresses the need for observable quantities to constrain the model processes.