Hole-type gaseous detectors for medical imaging and HEP experiments

This work presents the results on the development of a high pressure Xe gaseous detector envisaging medical imaging. The detector uses two VUV photosensors operating face-to-face, based on the CsI-MHSP with position discrimination capability. The known effect of the charge gain decrease with the gas pressure is compensated with a light gain using the electroluminescence process. Studies of signal amplitude, energy and position resolution are presented. On the second part, gaseous detectors based on THGEM where studied in order to fulfill the requirements of present and future high energy physics experiments. The work is focused on the application of THGEM in RICH detectors elements: a triple THGEM detector using CsI photocathodes in Ne mixtures was suggested. The ion backflow to the photocathode remains a concern and a limitation; to minimize it, the application of a new hole-structure, THCOBRA, was suggested. Preliminary results foresee good perspectives for the successful application of THCOBRA in ion back-flow suppression. This work contains several methods and measurements of the CsI photocathodes behaviour in radiation gaseous detectors. A long discussion on its issues and possible solutions are presented.

Diversifying medical imaging of breast lesions

Dissertação de mestrado, Engenharia Informática, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

'It was as if she had said....': May Sinclair and reading narratives of cure

May Sinclair was one of the most widely read and successful English women novelists of the first half of the twentieth century. She had interests and themes in common with many of those now considered to have been at the heart of English modernism. In terms of formal experimentation too her concerns chime with the aesthetic innovations of, for example, pound, Eliot and Woolf. Her early interest in psychoanalysis and support for the suffrage campaign also mark her out as a modern. Despite some work from feminist literary critics and her partial categorisation as modernist, however, her work still lacks a critical framework within which it can be read. Indeed, some of the work done by feminist critics on her has paradoxically re-marginalised her. In this thesis I aim to provide one critical framework through which Sinclair's work can be read. My contention is that the occluding of one aspect of her work and thought- its movement toward intellectual, emotional and aesthetic wholeness - has marred previous critical readings of her. By paying attention to this through a focus on discourses of cure, this thesis reads Sinclair's work with an awareness of its language, cultural context and intertextual relations. Early twentieth-century medical discourse, psychoanalysis, mysticism, the chivalric and the psychical are all used to read the works. At the same time, my aim is to read Sinclair's work without eliding its difficulties. Rather, I aim to read her in a way that acknowledges the difficulties of and fraught moments in her writing as markers of its significance.

Jazz Innovations I, March 10, 2010

Concert Program for Jazz Innovations I, March 10, 2010

Jazz Innovations Series, November 18, 2003

Concert Program for Jazz Innovations Series, November 18 2003

The Potential of Participedia as a Crowdsourcing Tool for Comparative Analysis of Democratic Innovations

For two reasons, our capacity for systematic comparison of innovative participatory democratic processes remains limited. First, the category of participatory democratic innovations remains relatively vague when compared to more traditional democratic institutions and practices. Second, until recently there existed no large-sample databases that captured relevant variables in the practice of democratic innovation. The lone exception to these patterns is the Participedia database, located online. Participedia is well placed to respond to the two obstacles to systematic comparative research on democratic innovation. First, its crowdsourced data collection strategy means that many of the cases on the platform are not well known and have not been the subject of sustained academic analysis. Second, the data captured in the articles provides the basis for systematic comparative analysis of democratic innovations both within type (e.g., participatory budgeting, mini-publics) and across types. The platform allows for systematic content analysis of text descriptions and/or statistical analysis of the datasets generated from the structured data fields. This article describes the data about innovative participatory democratic processes available from Participedia, and furnishes examples of the kinds of quantitative and qualitative insights about those processes that Participedia enables.

3D Reconstruction of Medical Images from Slices Automatically Landmarked with Growing Neural Models

In this study, we utilise a novel approach to segment out the ventricular system in a series of high resolution T1-weighted MR images. We present a brain ventricles fast reconstruction method. The method is based on the processing of brain sections and establishing a fixed number of landmarks onto those sections to reconstruct the ventricles 3D surface. Automated landmark extraction is accomplished through the use of the self-organising network, the growing neural gas (GNG), which is able to topographically map the low dimensionality of the network to the high dimensionality of the contour manifold without requiring a priori knowledge of the input space structure. Moreover, our GNG landmark method is tolerant to noise and eliminates outliers. Our method accelerates the classical surface reconstruction and filtering processes. The proposed method offers higher accuracy compared to methods with similar efficiency as Voxel Grid.

Analyzing and Modeling Medical Data on Distributed Computing Infrastructures

Researchers want to analyse Health Care data which may requires large pools of compute and data resources. To have them they need access to Distributed Computing Infrastructures (DCI). To use them it requires expertise which researchers may not have. Workflows can hide infrastructures. There are many workflow systems but they are not interoperable. To learn a workflow system and create workflows in a workflow system may require significant effort. Considering these efforts it is not reasonable to expect that researchers will learn new workflow systems if they want to run workflows of other workflow systems. As a result, the lack of interoperability prevents workflow sharing and a vast amount of research efforts is wasted. The FP7 Sharing Interoperable Workflow for Large-Scale Scientific Simulation on Available DCIs (SHIWA) project developed the Coarse-Grained Interoperability (CGI) to enable workflow sharing. The project created the SHIWA Simulation Platform (SSP) to support CGI as a production-level service. The paper describes how the CGI approach can be used for analysis and simulation in Health Care.

Image, video and 3D data registration: medical, satellite and video processing applications with quality metrics

Data registration refers to a series of techniques for matching or bringing similar objects or datasets together into alignment. These techniques enjoy widespread use in a diverse variety of applications, such as video coding, tracking, object and face detection and recognition, surveillance and satellite imaging, medical image analysis and structure from motion. Registration methods are as numerous as their manifold uses, from pixel level and block or feature based methods to Fourier domain methods. This book is focused on providing algorithms and image and video techniques for registration and quality performance metrics. The authors provide various assessment metrics for measuring registration quality alongside analyses of registration techniques, introducing and explaining both familiar and state–of–the–art registration methodologies used in a variety of targeted applications.

Transmitting Chinese Medicine: Changing Perceptions of Body, Pathology, and Treatment in Late Imperial China

Historians of Chinese medicine acknowledge the plurality of Chinese medicine along both synchronic and diachronic dimensions. Yet, there remains a tendency to think of tradition as being defined by some unchanging features. The Chinese medical body is a case in point. This is assumed to have been formalised by the late Han dynasty around a system of internal organs, conduits, collaterals, and associated body structures. Although criticism was voiced from time to time, this body and the micro/ macrocosmic cosmological resonances that underpin it are seen to persist until the present day. I challenge this view by attending to attempts by physicians in China and Japan in the period from the mid 16th to the late 18th century to reimagine this body. Working within the domain of cold damage therapeutics and combining philological scholarship, empirical observations, and new hermeneutic strategies these physicians worked their way towards a new territorial understanding of the body and of medicine as warfare that required an intimate familiarity with the body’s topography. In late imperial China this new view of the body and medicine was gradually re-absorbed into the mainstream. In Japan, however, it led to a break with this orthodoxy that in the Republican era became influential in China once more. I argue that attending further to the innovations of this period—commonly portrayed as one of decline—from a transnational perspective may help to go beyond the modern insistence to frame East Asian medicines as traditional.

Cyclotech - contribution to solve the Technetium shortage by using low energy medical cyclotrons

This paper presents work in progress, to develop an efficient and economic way to directly produce Technetium 99metastable (99mTc) using low-energy cyclotrons. Its importance is well established and relates with the increased global trouble in delivering 99mTc to Nuclear Medicine Departments relying on this radioisotope. Since the present delivery strategy has clearly demonstrated its intrinsic limits, our group decided to follow a distinct approach that uses the broad distribution of the low energy cyclotrons and the accessibility of Molybdenum 100 (100Mo) as the Target material. This is indeed an important issue to consider, since the system here presented, named CYCLOTECH, it is not based on the use of Highly Enriched (or even Low Enriched) Uranium 235 (235U), so entirely complying with the actual international trends and directives concerning the use of this potential highly critical material. The production technique is based on the nuclear reaction 100Mo (p,2n) 99mTc whose production yields have already been documented. Until this moment two Patent requests have already been submitted (the first at the INPI, in Portugal, and the second at the USPTO, in the USA); others are being prepared for submission on a near future. The object of the CYCLOTECH system is to present 99mTc to Nuclear Medicine radiopharmacists in a routine, reliable and efficient manner that, remaining always flexible, entirely blends with established protocols. To facilitate workflow and Radiation Protection measures, it has been developed a Target Station that can be installed on most of the existing PET cyclotrons and that will tolerate up to 400 μA of beam by allowing the beam to strike the Target material at an adequately oblique angle. The Target Station permits the remote and automatic loading and discharge of the Targets from a carriage of 10 Target bodies. On other hand, several methods of Target material deposition and Target substrates are presented. The object was to create a cost effective means of depositing and intermediate the target material thickness (25 - 100μm) with a minimum of loss on a substrate that is able to easily transport the heat associated with high beam currents. Finally, the separation techniques presented are a combination of both physical and column chemistry. The object was to extract and deliver 99mTc in the identical form now in use in radiopharmacies worldwide. In addition, the Target material is recovered and can be recycled.

A gestão dos resíduos hospitalares e o papel da autoridade de saúde : caso do concelho da Amad

RESUMO O Problema. A natureza, diversidade e perigosidade dos resíduos hospitalares (RH) exige procedimentos específicos na sua gestão. A sua produção depende do número de unidades de prestação de cuidados de saúde (upcs), tipo de cuidados prestados, número de doentes observados, práticas dos profissionais e dos órgãos de gestão das upcs, inovação tecnológica, entre outros. A gestão integrada de RH tem evoluído qualitativamente nos últimos anos. Existe uma carência de informação sobre os quantitativos de RH produzidos nas upcs e na prestação de cuidados domiciliários, em Portugal. Por outro lado, os Serviços de Saúde Pública, abrangendo o poder de Autoridade de Saúde, intervêm na gestão do risco para a saúde e o ambiente associado à produção de RH, necessitando de indicadores para a sua monitorização. O quadro legal de um país nesta matéria estabelece a estratégia de gestão destes resíduos, a qual é condicionada pela classificação e definição de RH por si adoptadas. Objectivos e Metodologias. O presente estudo pretende: quantificar a produção de RH resultantes da prestação de cuidados de saúde, em seres humanos e animais nas upcs, do sistema público e privado, desenvolvendo um estudo longitudinal, onde se quantifica esta produção nos Hospitais, Centros de Saúde, Clínicas Médicas e Dentárias, Lares para Idosos, Postos Médicos de Empresas, Centros de Hemodiálise e Clínicas Veterinárias do Concelho da Amadora, e se compara esta produção em dois anos consecutivos; analisar as consequências do exercício do poder de Autoridade de Saúde na gestão integrada de RH pelas upcs; quantificar a produção média de RH, por acto prestado, nos cuidados domiciliários e, com um estudo analítico transversal, relacionar essa produção média com as características dos doentes e dos tratamentos efectuados; proceder à análise comparativa das definições e classificações de RH em países da União Europeia, através de um estudo de revisão da legislação nesta matéria em quatro países, incluindo Portugal. Resultados e Conclusões. Obtém-se a produção média de RH, por Grupos I+II, III e IV: nos Hospitais, por cama.dia, considerando a taxa de ocupação; por consulta, nos Centros de Saúde, Clínicas Médicas e Dentárias e Postos Médicos de Empresas; por cama.ano, nos Lares para Idosos, considerando a sua taxa de ocupação; e por ano, nas Clínicas de Hemodiálise e Veterinárias. Verifica-se que a actuação da Autoridade de Saúde, produz nas upcs uma diferença estatisticamente significativa no aumento das contratualizações destas com os operadores de tratamento de RH. Quantifica-se o peso médio de resíduos dos Grupos III e IV produzido por acto prestado nos tratamentos domiciliários e relaciona-se esta variável dependente com as características dos doentes e dos tratamentos efectuados. Comparam-se os distintos critérios utilizados na elaboração das definições e classificações destes resíduos inscritas na legislação da Alemanha, Reino Unido, Espanha e Portugal. Recomendações. Apresentam-se linhas de investigação futura e propõe-se uma reflexão sobre eventuais alterações de aspectos específicos no quadro legal português e nos planos de gestão integrada de RH, em Portugal. ABSTRACT The problem: The nature, diversity and hazardousness of hospital wastes (HW) requires specific procedures in its management. Its production depends on the number and patterns of healthcare services, number of patients, professional and administration practices and technologic innovations, among others. Integrated management of HW has been developping, in the scope of quality, for the past few years. There is a lack of information about the amount of HW produced in healthcare units and in the domiciliary visits, in Portugal. On the other hand, the Public Health Services, embracing the Health Authority’s power, play a very important role in managing the risk of HW production to public and environmental health. They need to use some indicators in its monitorization. In a country, rules and regulations define hospital waste management policies, which are confined by the addopted classification and definition of HW. Goals and Methods: This research study aims to quantify the production of HW as a result of healthcare services in human beings and animals, public service and private one. Through a longitudinal study, this production is quantified in Hospitals, Health Centers, Medical and Dental Clinics, Residential Centers for old people, Companies Medical Centers and Veterinary and Haemodyalisis Clinics in Amadora’s Council, comparing this production in two consecutive years. This study also focus the consequences of the Health Authority’s role in the healthcare services integrated management of HW. The middle production of HW in the domiciliary treatments is also quantified and, with a transversal analytic study, its association with patients and treatments’ characteristics is enhanced. Finally, the definitions and classifications in the European Union Countries are compared through a study that revises this matter’s legislation in four countries, including Portugal. Results and Conclusions: We get the middle production of Groups I+II, III and IV: HW: in Hospitals, by bed.day, bearing the occupation rate; by consultation, in Health Centers, Medical and Dental Clinics and Companies Medical Centers; by bed.year in Residential Centers for old people, considering their occupation rate; by year, in Veterinary and Haemodyalisis Clinics. We verify that the Health Authority’s role produces a significative statistical difference in the rise of the contracts between healthcare services and HW operators. We quantify the Groups III and IV’s wastes middle weight, produced by each medical treatment in domiciliary visits and relate this dependent variable with patients and treatments’ characteristics. We compare the different criteria used in the making of definitions and classifications of these wastes registered in German, United Kingdom, Spain and Portugal’s laws. Recommendations: Lines of further investigation are explaned. We also tender a reflexion about potential changes in rules, in regulations and in the integrated plans for managing hospital wastes in Portugal. RÉSUMÉ Le Problème. La gestion des déchets d'activités hospitalières (DAH) et de soins de santé (DSS) exige des procédures spécifiques en raison de leur nature, diversité et dangerosité. Leur production dépend, parmi d’autres, du nombre d’unités de soins de santé (USS), du type de soins administrés, du nombre de malades observés, des pratiques des professionnels et des organes de gestion des USS, de l’innovation technologique. La gestion intégrée des DAH et des DSS subit une évolution qualitative dans les dernières années. Il existe un déficit d’information sur les quantitatifs de DAH et de DSS provenant des USS et de la prestation de soins domiciliaires, au Portugal. D’autre part les Services de Santé Publique, y compris le pouvoir de l’Autorité de Santé, qui interviennent dans la gestion du risque pour la santé et pour l’environnement associé à la production de DAH et de DSS, ont besoin d’indicateurs pour leur surveillance. Dans cette matière le cadre légal établit la stratégie de gestion de ces déchets, laquelle est conditionnée par la classification et par la définition des DAH et des DSS adoptées par le pays. Objectifs et Méthodologie. Cet étude prétend: quantifier la production de DAH et de DSS provenant de la prestation de soins de santé, en êtres humains et animaux dans les USS du système public et privé. À travers un étude longitudinal, on quantifie cette production dans les Hôpitaux, Centres de Santé, Cliniques Médicales et Dentaires, Maisons de Repos pour personnes âgées, Cabinets Médicaux d’ Entreprises, Centres d’Hémodialyse et Cliniques Vétérinaires du municipe d’ Amadora, en comparant cette production en deux ans consécutifs; analyser les conséquences de l’exercice du pouvoir de l’Autorité de Santé dans la gestion intégrée des DAH et des DSS par les USS; quantifier la production moyenne de DAH et de DSS dans la prestation de soins domiciliaires et, avec un étude analytique transversal, rapporter cette production moyenne avec les caractéristiques des malades et des soins administrés; procéder à l’ analyse comparative des définitions et classifications des DAH et des DSS dans des pays de l’Union Européenne, à travers un étude de révision de la législation relative à cette matière dans quatre pays, Portugal y compris. Résultats et Conclusions. On obtient la production moyenne de DAH et des DSS, par Classes I+II, III et IV: dans les hôpitaux, par lit.jour, en considérant le taux d’occupation; par consultation, dans les Centres de Santé, Cliniques Médicales et Dentaires et Cabinets Médicaux d’ Entreprises par lit.an dans les Maisons de Repos pour personnes âgées en considérant le taux d’occupation; et par an, dans les Cliniques d’Hémodialyse et Vétérinaires. On constate que l’actuation de l’Autorité de Santé produit dans les USS une différence statistiquement significative dans l’accroissement de leurs contractualisations avec les opérateurs de traitement de DAH et de DSS. On quantifie le poids moyen des déchets des Classes III et IV produit par acte de prestation de soins à domicile et on rapporte cette variable dépendante avec les caractéristiques des malades et des soins administrés. On compare les différents critères utilisés dans l’élaboration des définitions et des classifications de ces déchets inscrites dans la légis