O universo ficcional de Julien Gracq: formas, sentidos e mecanismos do imaginário

Universidade da Madeira

Detecção de bactérias no ar em ambiente hospitalar com recurso a técnicas moleculares

A Qualidade do Ar Interior (QAI) revela-se de grande importância no ambiente hospitalar devido à disseminação aérea de bactérias potenciar as infecções nosocomiais. Os estudos nesta temática são raros em Portugal e inexistentes na Madeira. Este trabalho tem como objectivos identificar com elevada precisão a flora bacteriana aerosolizada no Hospital Dr. João de Almada (HJA) utilizando técnicas moleculares, determinar a sua origem, disseminação e especificidades e analisar globalmente a QAI. O ar exterior e de 15 locais no interior do HJA foi amostrado em Abril de 2009. Foram medidas a temperatura, humidade e concentração de CO2 e NO2 e quantificadas as bactérias e fungos no ar. Utilizaram-se testes bioquímicos e técnicas moleculares para caracterização e identificação de bactérias e foram comparadas comunidades bacterianas. A biodiversidade bacteriana no ar interior do HJA é dominada pelo género Staphylococcus (68%), sendo as espécies mais frequentes S. cohnii urealyticus, S. haemolyticus, S. capitis ou S. caprae e Micrococcus luteus. A maioria das espécies encontradas é comum em ambiente hospitalar e na flora comensal humana. As Staphylococcus spp. detectadas são consideradas patogénicas oportunistas envolvidas em infecções nosocomiais. A QAI é conforme com a legislação na maioria dos locais, havendo microorganismos em excesso em 12 das 72 amostras. O excesso de fungos relacionou-se com eventos de bruma no exterior e o excesso de bactérias correlacionou-se com a actividade humana e foi potenciado pela fraca ventilação e a presença ou manipulação de materiais contaminados. O ar exterior tem boa qualidade para ventilação do HJA, excepto durante eventos de bruma. As comunidades bacterianas aerosolizadas têm maior similaridade entre locais do mesmo tipo, sendo os ocupantes o principal foco de contaminação. São propostas medidas correctivas como o aumento da ventilação dos locais com elevada actividade humana e cuidados na manipulação de roupa suja e resíduos.

Contributo da exsudação de ácidos orgânicos para a tolerância ao alumínio em duas variedades de trigo da Madeira

O trigo encontra-se em terceiro lugar entre os cereais mais produzidos em todo o mundo. Um dos principais entraves ao seu cultivo e produção é a acidez dos solos, que proporciona a biodisponibilidade do alumínio, com a formação de catiões facilmente absorvidos que afetam o desenvolvimento radicular e podem levar à morte da planta. Algumas variedades de trigo desenvolveram a capacidade de tolerar a presença do alumínio. Esta tolerância pode resultar de diferentes estratégias, através da ação de diversos mecanismos, sendo que o presente trabalho pretende avaliar a importância da exsudação de ácidos orgânicos na tolerância ao alumínio por algumas variedades de trigo na Madeira. Ao longo deste trabalho foram analisados vários caracteres, cuja variação permite discriminar o comportamento de duas variedades regionais de trigo (Triticum aestivum erithrospermum Körn e Triticum aestivum var. milturum (Alef.) Velican) em condições de stress provocado pelo alumínio. As amostras de trigo foram colocadas em vasos herméticos na presença ou ausência da alumínio e o meio de crescimento final foi analisado para determinar a capacidade das plantas para exsudar malato e citrato. As plantas foram analisadas em relação a cinco marcadores moleculares para detetar a presença ou ausência do gene ALTM1 que codifica a proteína transmembranar de transporte do malato. Em resultado deste trabalho, conclui-se que uma das variedades regionais (T. aestivum erithrospermum) é tolerante ao alumínio e a outra (T. aestivum var. milturum) moderadamente tolerante. Ambas as variedades têm capacidade de exsudar ácidos orgânicos, ainda que a primeira tivesse uma exsudação mais proeminente. A variedade moderadamente tolerante apresentou uma taxa de alongamento radicular inferior e uma produção de calose superior devido à sua maior suscetibilidade ao alumínio. O gene ALMT1, responsável pelo transporte do malato do citoplasma para o exterior das células, foi detetado em ambas as variedades, levando a concluir que o que difere entre as variedades é a sua expressão.

Relações entre mecanismos de coordenação e controle com desempenho organizacional: um estudo nas instituições públicas de ensino médio de Natal

This research aimed at relating coordination and control forms to organizational performance. The multicase study was applied in two public high schools: Centro Federal de Educação Tecnológica do Rio Grande do Norte and Floriano Cavalcanti. In order to accomplish these objectives, it was developed a qualitative analysis and considered coordination and control forms of several authors. Also was considered Sander´s (1984) model of organizational performance. The mentioned model considers two criteria to analyze organizational performance: one instrumental (efficiency and efficacy) and other substantive (effectiveness e relevance). The research attempts to show the importance of balancing these criteria in a way that effectiveness and relevance becomes more important at schools. It was proven that the use of bureaucratic coordination forms has the power to influence the evaluation on the instrumental technique. At the same time, it was observed that the use of mechanisms based on the autonomy of the school is related to efficiency and efficacy. The object of this research can be considered successful

Síntese e impregnação de peneiras moleculares Fe MCM-41 derivada de sílica da casca do arroz

The mesoporous molecular sieves of the MCM-41 and FeMCM-41 type are considered promissory as support for metals used as catalysts in oil-based materials refine processes and as adsorbents for environmental protection proposes. In this work MCM-41 and FeMCM41 were synthesized using rice husk ash - RHA as alternative to the conventional silica source. Hydrothermal synthesis was the method chosen to prepare the materials. Pre-defined synthesis parameters were 100°C for 168 hours, later the precursor was calcinated at 550°C for 2 hours under nitrogen and air flow. The sieves containing different proportions of iron were produced by two routes: introduction of iron salt direct synthesis; and a modification post synthesis consisting in iron salt 1 % and 5% impregnation in the material followed by thermal decomposition. The molecular sieves were characterized by X ray diffraction XRD, Fourier transform infrared spectroscopy FT-IR, X ray fluorescence spectroscopy XFR, scanning electronic microscopy SEM, specific surface area using the BET method, Termogravimetry TG. The kinetic model of Flynn Wall was used with the aim of determining the apparent activation energy of the surfactant remove (CTMABr) in the MCM- 41 porous. The analysis made possible the morphology characterization, identifying the presence of hexagonal structure typical for mesoporous materials, as well as observation of the MCM41 and iron of characteristic bands.

Síntese e caracterização de peneiras moleculares mesoporosas do tipo MCM-41 e AlMCM-41 a partir de fontes alternativas de sílica e de alumínio

The mesoporous molecular sieves of MCM-41 and AlMCM-41 type are considered as promising support for metal in the refining processes of petroleum-based materials as catalysts and adsorbents for environmental protection. In this work the molecular sieves MCM-41 and AlMCM-41 were synthesized by replacing the source of silica conventionally used, for quartz, an alternative and abundant, and the use of waste from the production of diatomaceous earth, an aluminum-silicate, as a source aluminum, due to abundant reserves of diatomaceous earth in the state of Rio Grande do Norte in the city of Ceará-Mirim, with the objective of producing high-value materials that have similar characteristics to traditional commercial catalysts in the market. These materials were synthesized by the method of hydrothermal synthesis at 100 º C for 7 days and subjected to calcination at 500 º C for 2 hours under flow of nitrogen and air. The molecular sieves were characterized by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetric analysis (TG), adsorption of N2 (BET and BJH methods), spectroscopy in the infra red (FTIR), microscopy scanning electron (SEM) and transmission electron microscopy (TEM). The analysis indicated that the synthesized materials showed characteristic hexagonal structure of mesopores materials with high specific surface area and sort and narrow distribution of size of pores

Modelagem matemática para o transporte de partículas sujeitas a múltiplos mecanismos de retenção

Discrepancies between classical model predictions and experimental data for deep bed filtration have been reported by various authors. In order to understand these discrepancies, an analytic continuum model for deep bed filtration is proposed. In this model, a filter coefficient is attributed to each distinct retention mechanism (straining, diffusion, gravity interception, etc.). It was shown that these coefficients generally cannot be merged into an effective filter coefficient, as considered in the classical model. Furthermore, the derived analytic solutions for the proposed model were applied for fitting experimental data, and a very good agreement between experimental data and proposed model predictions were obtained. Comparison of the obtained results with empirical correlations allowed identifying the dominant retention mechanisms. In addition, it was shown that the larger the ratio of particle to pore sizes, the more intensive the straining mechanism and the larger the discrepancies between experimental data and classical model predictions. The classical model and proposed model were compared via statistical analysis. The obtained p values allow concluding that the proposed model should be preferred especially when straining plays an important role. In addition, deep bed filtration with finite retention capacity was studied. This work also involves the study of filtration of particles through porous media with a finite capacity of filtration. It was observed, in this case, that is necessary to consider changes in the boundary conditions through time evolution. It was obtained a solution for such a model using different functions of filtration coefficients. Besides that, it was shown how to build a solution for any filtration coefficient. It was seen that, even considering the same filtration coefficient, the classic model and the one here propposed, show different predictions for the concentration of particles retained in the porous media and for the suspended particles at the exit of the media

Semeadora-adubadora: mecanismos de corte de palha e cargas verticais aplicadas

This work had as objective to evaluate the performance of mechanisms of cutting of the no-tillage seedrills in different vegetable coverings and applied vertical loads. The experimental design used was in randomized blocks and factorial scheme 3 x 4, with four replications. The trials were accomplished with three different mechanisms of culting of the straw (plane disc, corrugated disc and wavy disc), using four different vertical loads (750, 1500, 2250 and 3000 N). All treatments were accomplished in five straw coverings (corn, sorghum, triticale, black oats and radish). The results showed that larger the amount of dry matter covering the soil, higher the demand of horizontal and vertical forces. The wavy disc promotes the largest values of area of mobilized soil and requires large horizontal force, vertical force and horizontal force per area of cutting depth of discs (specific force). The treatment with plane disc required higher values of the horizontal forces per area of mobilized soil and of vertical force in the corn and sorghum coverings.

Resistência e mecanismos envolvidos em genótipos de milho em relação ao ataque do gorgulho, Sitophilus zeamais Mots. (Coleoptera: Curculionidae)

A resistência de 30 genótipos de milho ao ataque de Sitophilus zeamais Mots. foi avaliada em teste sem chance de escolha, sendo efetuada uma seleção de 10 deles (M 9560, XHT 12, A 952, AG 5011, X 9557, Z 8452, C 615, C 435, DINA 888, C 606), os quais foram submetidos ao teste com chance de escolha, avaliando-se a atratividade e a preferência para oviposição. Pelos resultados concluiu-se que os genótipos menos atrativos foram Z 8452 (3,1%) e M 9560 (3,2%), enquanto o mais atrativo foi C 615 (24,7%). Os genótipos que apresentaram resistência do tipo não-preferência para oviposição foram A 952, M 9560 e XHT 12 com números médios de 2,0; 3,0 e 3,4 ovos por recipiente. A resistência do tipo não-preferência para alimentação e/ou antibiose foi observada nos genótipos M 9560, A 952 e Z 8452. Os genótipos com alta suscetibilidade ao gorgulho foram C 435, C 444, C 606 e AG 8010.

Mecanismos sócio-genéticos da representação social de trabalho docente por grupos de licenciandos de física e de química da Universidade Federal do Rio Grande do Norte

This research aims to understand the social representations Teaching Work in groups of undergraduate students of Physics and Chemistry of the Federal University of Rio Grande do Norte. For this, the proposal was based on the three theoretical and methodological consensus Carvalho (2012) in the explanation of socio-genetic mechanisms constituents of dynamic consensus that has functionality to your organization. It Was used to achieve this goal, the theoretical-epistemological Serge Moscovici (1978, 2003), Jodelet (2011), Wagner (1998,( 2011) and Carvalho (2012). The corpus analyzed results from a qualitative and quantitative research, developed in three stages. The first two (2) questionnaires to fifty (50) of each undergraduate course, a questionnaire and another profile for collection of free associations concerning motes inductors "Give Lesson," "Student" and "Teacher". The second step in the procedure Multiple Classifications, Roazzi (1995), aimed for another thirty (30) undergraduate students for each course, as well as Document Analysis of Educational Projects Curriculum courses in Physics and Chemistry. The data analysis of the first stage focused on descriptive statistics and frequency and average order of the words associated with motes inductors. The results from the Multiple Classification Procedure submitted to multidimensional analysis (MSA multidimensional scalogram analysis) and SSA (Similarity Structure Analysis), were interpreted by the theoretical and methodological proposal of the three consensus, supported by analysis of the rhetorical nature of justifications classifications and categorizations of words, boosted in times of application of Procedure Multiple Classification. The data revealed that the groups surveyed were the same Social Representation with specific dynamic consensual. Thinking Teaching Work for these groups it is considered in three dimensions: the BE-DO-HAVE of teaching. In the group of Physics consensus was clear semantic, which expressed a dynamic in which the interpretations of "Teaching Work" peacefully coexist on perceptions of two concepts: An identity around the "BE" "Teacher" or "BE" "Educator" and the other, how they think about professional development. The type of group consensus Chemistry pointed to a consensual logic hierarchical order in which the gradual between the elements of BE-DO-HAVE attested conflicts and disagreements about the perceptual object "Teaching Work", around what value most, whether they are the attributes of personal or professional-technical dimension of teaching, in the course of professional development. The thesis to explain the mechanisms of socio-genetic Representation Social Teaching Work by theoretical and methodological proposal was confirmed