Description of microsporidia in simulids: molecular and morphological characterization of microsporidia in the larvae of Simulium pertinax Kollar (Diptera: Simuliidae)

IntroductionMicrosporidia constitute the most common black fly pathogens, although the species' diversity, seasonal occurrence and transmission mechanisms remain poorly understood. Infections by this agent are often chronic and non-lethal, but they can cause reduced fecundity and decreased longevity. The objective of this study was to identify microsporidia infecting Simulium (Chirostilbia) pertinax (Kollar, 1832) larvae from Caraguatatuba, State of São Paulo, Brazil, by molecular and morphological characterization.MethodsLarvae were collected at a single point in a stream in a rural area of the city and were kept under artificial aeration until analysis. Polydispyrenia spp. infection was characterized by the presence of at least 32 mononuclear spores measuring 6.9 ± 1.0 × 5.0 ± 0.7µm in persistent sporophorous vesicles. Similarly, Amblyospora spp. were characterized by the presence of eight uninucleate spores measuring 4.5 × 3.5µm in sporophorous vesicles.ResultsThe molecular analysis confirmed the presence of microsporidian DNA in the 8 samples (prevalence of 0.51%). Six samples (Brazilian larvae) were related to Polydispyrenia simulii and Caudospora palustris reference sequences but in separate clusters. One sample was clustered with Amblyospora spp. Edhazardia aedis was the positive control taxon.ConclusionsSamples identified as Polydispyrenia spp. and Amblyospora spp. were grouped with P. simulii and Amblyospora spp., respectively, corroborating previous results. However, the 16S gene tree showed a considerable distance between the black fly-infecting Amblyospora spp. and the mosquito-infecting spp. This distance suggests that these two groups are not congeneric. Additional genomic region evaluation is necessary to obtain a coherent phylogeny for this group.

Description and characterization of the melanic morphotype of Rhodnius nasutus Stål, 1859 (Hemiptera: Reduviidae: Triatominae)

IntroductionFor the first time we provide the description of the melanic (dark) morphotype of Rhodnius nasutus and determine the pattern of genetic inheritance for this characteristic.MethodsDark morph R. nasutus specimens were crossbred with standard (typically patterned) R. nasutus.ResultsWe present the first occurrence of the melanic morphotype in the genus Rhodnius. The crossbreeding results demonstrate that the inheritance pattern of this characteristic follows Mendel's simple laws of segregation and an independent assortment of alleles.ConclusionsPhenotypic variation of R. nasutus reinforces the heterogeneity found in the Triatominae. Descriptions of new species in this subfamily require rigorous validation criteria.

Susceptibility characterization of residual Brazilian populations of Triatoma infestans Klug, 1834 (Hemiptera: Reduviidae) to deltamethrin pyrethroid

INTRODUCTION: Despite years of efforts towards the elimination of Triatoma infestans in Brazil, residual foci still persist in some areas of the States of Bahia and Rio Grande do Sul. The persistence of these T. infestans populations in the country has two different origins of equal concern: operational failures or insecticide resistance. Thus, the objective of this study was to characterize the susceptibility profile of the residual Brazilian populations of T. infestans to deltamethrin. METHODS: The susceptibility reference lineage was derived from Cipein/Argentina. The populations studied were manually collected using a dislodging agent in peridomiciles in the States of Bahia (Novo Horizonte) and of Rio Grande do Sul (Santa Rosa and Doutor Maurício Cardoso). Serial dilutions of deltamethrin were prepared and applied at the dorsal abdomen of first instar nymphs. The control group received only pure acetone. Mortality was evaluated after 72h. Qualitative tests assessed the mortality of a diagnostic dose of 1xLD99 (2.76ng a.i./nymph) determined for the susceptibility reference lineage. RESULTS: The susceptibility profile characterization of the T. infestans populations revealed an RR50 ranging from 1.73 to 3.26. The mortality percentage in response to a diagnostic dose was 100%. The results obtained in the quantitative and qualitative assays corresponded for all populations. CONCLUSIONS: The results of this study indicate that the persistence of residual foci of T. infestans in Bahia and Rio Grande do Sul is not related to insecticide resistance but may be associated with operational failures. In Rio Grande do Sul, we must consider the possibility of continuous reinfestation by Argentinian individuals, which justifies active and efficient epidemiological surveillance.

Characterization of a foodborne outbreak caused by Salmonella Enteritidis in Aracaju, State of Sergipe, Brazil

INTRODUCTION: In December 2001, an outbreak of foodborne gastroenteritis infected 114 of 161 people who ate at a restaurant in Aracaju, State of Sergipe, Brazil. METHODS: The epidemiological and microbiological aspects of the outbreak were characterized. RESULTS: Potato salad made with homemade mayonnaise and stored at unsuitable temperatures was associated with increased risk of foodborne infection. Salmonella Enteritidis was isolated from the diarrheal stools of the hospitalized patients, and genotyping of the fecal samples generated identical randomly amplified polymorphic deoxyribonucleic acid (DNA) profiles. CONCLUSIONS : To the best of our knowledge, this is the first and the only record of a gastrointestinal outbreak in Sergipe.

Fabrication and characterization of transparent conductive oxide surface sensors for electrocorticography – TrECoG

Understanding how the brain works has been one of the greatest goals of mankind. This desire fuels the scientific community to pursue novel techniques able to acquire the complex information produced by the brain at any given moment. The Electrocorticography (ECoG) is one of those techniques. By placing conductive electrodes over the dura, or directly over the cortex, and measuring the electric potential variation, one can acquire information regarding the activation of those areas. In this work, transparent ECoGs, (TrECoGs) are fabricated through thin film deposition of the Transparent Conductive Oxides (TCOs) Indium-Zinc-Oxide (IZO) and Gallium-Zinc-Oxide (GZO). Five distinct devices have been fabricated via shadow masking and photolithography. The data acquired and presented in this work validates the TrECoGs fabricated as efficient devices for recording brain activity. The best results were obtained for the GZO- based TrECoG, which presented an average impedance of 36 kΩ at 1 kHz for 500 μm diameter electrodes, a transmittance close to 90% for the visible spectrum and a clear capability to detect brain signal variations. The IZO based devices also presented high transmittance levels (90%), but with higher impedances, which ranged from 40 kΩ to 100 kΩ.

Phenotypic and molecular characterization of CTX-M extended-spectrum beta-lactamase-producing Escherichia coli isolates in Shiraz, Iran

AbstractINTRODUCTIONThe aim of this study was to detect the prevalence of the extended-spectrum beta-lactamase (ESBL)-encoding CTX-M gene in Escherichia coliisolates.METHODS:Phenotypic screening of 376 E. coli isolates for ESBL was conducted using disk diffusion. ESBL-producing isolates were tested using PCR and specific primers. The blaCTX-M cluster was identified using the RFLP method, and its genotype was sequenced.RESULTS:From 202 ESBL-producing E. coli , 185 (91.5%) possessed CTX-M genes. CTX-M-1 subtypes were found in 98% of the isolates. The blaCTX-M gene was identical to CTX-M-15.CONCLUSIONS:A high prevalence of CTX-M-1-producing E. coli apparently exists in Shiraz, Iran.

Molecular characterization of group A rotavirus before and after the introduction of vaccines in Brazil

ABSTRACTINTRODUCTION:In this study, the molecular characteristics of group A rotavirus (RVA) were compared in samples obtained before and after RVA vaccine-introduction in Brazil.METHODS:Eighty samples were screened for the presence of RVA. Positive samples were molecularly analyzed.RESULTS:RVA positivity was 16.9%, with a predominance of G2P[4]. Periods: pre-vaccination: predominance of IId (G1), IId (G2) lineages, and I1 and E1 genotypes; post-vaccination: predominance of Ib (G1), IIa, and IIc (G2) lineages and I2 and E2 genotypes.CONCLUSIONS:Although changes in RVA-circulation pattern were observed in the post-vaccination period, it could not be attributed to vaccination process.

Molecular characterization of Mycobacterium tuberculosis isolates from Tehran, Iran by restriction fragment length polymorphism analysis and spoligotyping

Abstract: INTRODUCTION Characterization of Mycobacterium tuberculosis (MTB) isolates by DNA fingerprinting has contributed to tuberculosis (TB) control. The aim of this study was to determine the genetic diversity of MTB isolates from Tehran province in Iran. METHODS MTB isolates from 60 Iranian and 10 Afghan TB patients were fingerprinted by standard IS6110-restriction fragment length polymorphism (RFLP) analysis and spoligotyping. RESULTS The copy number of IS6110 ranged from 10-24 per isolate. The isolates were classified into 22 clusters showing ≥ 80% similarity by RFLP analysis. Fourteen multidrug-resistant (MDR) isolates were grouped into 4 IS6110-RFLP clusters, with 10 isolates [71% (95% CI: 45-89%)] in 1 cluster, suggesting a possible epidemiological linkage. Eighteen Iranian isolates showed ≥ 80% similarity with Afghan isolates. There were no strains with identical fingerprints. Spoligotyping of 70 isolates produced 23 distinct patterns. Sixty (85.7%) isolates were grouped into 13 clusters, while the remaining 10 isolates (14.2%) were not clustered. Ural (formerly Haarlem4) (n = 22, 31.4%) was the most common family followed by Central Asian strain (CAS) (n = 18, 25.7%) and T (n = 9, 12.8%) families. Only 1strain was characterized as having the Beijing genotype. Among 60 Iranian and 10 Afghan MTB isolates, 25% (95% CI: 16-37) and 70% (95% CI: 39-89) were categorized as Ural lineage, respectively. CONCLUSIONS A higher prevalence of Ural family MTB isolates among Afghan patients than among Iranian patients suggests the possible transmission of this lineage following the immigration of Afghans to Iran.

Production and characterization of Chitin-Glucan Complex by Komagataella pastoris

This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)

Production and characterization of electrospun composite fibers: confinement of thermosensitive microgels

Materials engineering focuses on the assembly of materials´ properties to design new products with the best performance. By using sub-micrometer size materials in the production of composites, it is possible to obtain objects with properties that none of their compounds show individually. Once three-dimensional materials can be easily customized to obtain desired properties, much interest has been paid to nanostructured poly-mers in order to build biocompatible devices. Over the past years, the thermosensitive microgels have become more common in the framework of bio-materials with potential applicability in therapy and/or diagnostics. In addition, high aspect ratio biopolymers fibers have been produced using the cost-effective method called electrospinning. Taking advantage of both microgels and electrospun fibers, surfaces with enhanced functionalities can be obtained and, therefore employed in a wide range of applications. This dissertation reports on the confinement of stimuli-responsive microgels through the colloidal electro-spinning process. The process mainly depends on the composition, properties and patterning of the precur-sor materials within the polymer jet. Microgels as well as the electrospun non-woven mats were investigated to correlate the starting materials with the final morphology of the composite fibers. PNIPAAm and PNIPAAm/Chitosan thermosensitive microgels with different compositions were obtained via surfactant free emulsion polymerization (SFEP) and characterized in terms of chemical structure, morphology, thermal sta-bility, swelling properties and thermosensitivity. Finally, the colloidal electrospinning method was carried out from spinning solutions composed of the stable microgel dispersions (up to a concentration of about 35 wt. % microgels) and a polymer solution of PEO/water/ethanol mixture acting as fiber template solution. The confinement of microgels was confirmed by Scanning Electron Microscopy (SEM). The electrospinning process was statistically analysed providing the optimum set of parameters aimed to minimize the fiber diameter, which give rise to electrospun nanofibers of PNIPAAm microgels/PEO with a mean fiber diameter of 63 ± 25 nm.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Electrical characterization and modification of low dimensional oxide semiconductors for sensor applications

This work reviews the recent research on ion and UV irradiation of β-

Plasma nitriding of AA2011 alloy and surface characterization by NDT techniques

Al-Cu alloys are widely used in the aerospace and automotive industries due to their high specific strength in some tempered conditions. However, due to poor corrosion and wear resistance, they are often anodized and/or painted. Plasma nitriding has been proposed as an alternative, though the developments in this technique are still in a recent stage for Al alloys. Electrical characterization techniques are well implemented NDTs in the industry because of good accuracy associated with lower cost, compared to other methods. Some, like eddy currents and 4-point probe techniques, are often used in coating inspection. The objective of this study was to perform Al nitriding at low temperatures to minimize the tempering initial condition damage and to assess the feasibility of eddy currents technique as a method for evaluating surface properties. The work developed can be divided in two stages. The first one was the process tuning, done at the Shibaura Institute of Technology, in Tokyo; and the second was the electrical characterization done in Faculdade de Ciências e Tecnologia, UNL. Low temperature nitriding of AA2011 alloy specimens was successfully achieved. Electrical conductivity results show that lift-off measurements by eddy currents testing can be related to surface properties.

Characterization of newborns with nonimmune hydrops fetalis admitted to a neonatal intensive care unit

PURPOSE: To determine the incidence and characteristics of nonimmune hydrops fetalis in the newborn population. METHOD: A retrospective study of the period between 1996 and 2000, including all newborns with a prenatal or early neonatal diagnosis of nonimmune hydrops fetalis, based on clinical history, physical examination, and laboratory evaluation. The following were analyzed: prenatal follow-up, delivery type, gender, birth weight, gestational age, presence of perinatal asphyxia, nutritional classification, etiopathic diagnosis, length of hospital stay, mortality, and age at death. RESULTS: A total of 47 newborns with hydrops fetalis (0.42% of live births), 18 (38.3%) with the immune form and 29 (61.7%) with the nonimmune form, were selected for study. The incidence of nonimmune hydrops fetalis was 1 per 414 neonates. Data was obtained from 21 newborns, with the following characteristics: 19 (90.5%) were suspected from prenatal diagnosis, 18 (85.7%) were born by cesarean delivery, 15 (71.4%) were female, and 10 (47.6%) were asphyxiated. The average weight was 2665.9 g, and the average gestational age was 35 3/7 weeks; 14 (66.6%) were preterm; 18 (85.0 %) appropriate delivery time; and 3 (14.3%) were large for gestational age. The etiopathic diagnosis was determined for 62%, which included cardiovascular (19.0%), infectious (9.5%), placental (4.8%), hematologic (4.7%), genitourinary (4.8%), and tumoral causes (4.8%), and there was a combination of causes in 9.5%. The etiology was classified as idiopathic in 38%. The length of hospital stay was 26.6 ± 23.6 days, and the mortality rate was 52.4%. CONCLUSIONS: The establishment of a suitable etiopathic diagnosis associated with prenatal detection of nonimmune hydrops fetalis can be an important step in reducing the neonatal mortality rate from this condition.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.