908 resultados para LC-MSMS
Resumo:
Thesis: A liquid-cooled, direct-drive, permanent-magnet, synchronous generator with helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit offers an excellent combination of attributes to reliably provide economic wind power for the coming generation of wind turbines with power ratings between 5 and 20MW. A generator based on the liquid-cooled architecture proposed here will be reliable and cost effective. Its smaller size and mass will reduce build, transport, and installation costs. Summary: Converting wind energy into electricity and transmitting it to an electrical power grid to supply consumers is a relatively new and rapidly developing method of electricity generation. In the most recent decade, the increase in wind energy’s share of overall energy production has been remarkable. Thousands of land-based and offshore wind turbines have been commissioned around the globe, and thousands more are being planned. The technologies have evolved rapidly and are continuing to evolve, and wind turbine sizes and power ratings are continually increasing. Many of the newer wind turbine designs feature drivetrains based on Direct-Drive, Permanent-Magnet, Synchronous Generators (DD-PMSGs). Being low-speed high-torque machines, the diameters of air-cooled DD-PMSGs become very large to generate higher levels of power. The largest direct-drive wind turbine generator in operation today, rated just below 8MW, is 12m in diameter and approximately 220 tonne. To generate higher powers, traditional DD-PMSGs would need to become extraordinarily large. A 15MW air-cooled direct-drive generator would be of colossal size and tremendous mass and no longer economically viable. One alternative to increasing diameter is instead to increase torque density. In a permanent magnet machine, this is best done by increasing the linear current density of the stator windings. However, greater linear current density results in more Joule heating, and the additional heat cannot be removed practically using a traditional air-cooling approach. Direct liquid cooling is more effective, and when applied directly to the stator windings, higher linear current densities can be sustained leading to substantial increases in torque density. The higher torque density, in turn, makes possible significant reductions in DD-PMSG size. Over the past five years, a multidisciplinary team of researchers has applied a holistic approach to explore the application of liquid cooling to permanent-magnet wind turbine generator design. The approach has considered wind energy markets and the economics of wind power, system reliability, electromagnetic behaviors and design, thermal design and performance, mechanical architecture and behaviors, and the performance modeling of installed wind turbines. This dissertation is based on seven publications that chronicle the work. The primary outcomes are the proposal of a novel generator architecture, a multidisciplinary set of analyses to predict the behaviors, and experimentation to demonstrate some of the key principles and validate the analyses. The proposed generator concept is a direct-drive, surface-magnet, synchronous generator with fractional-slot, duplex-helical, double-layer, non-overlapping windings formed from a copper conductor with a coaxial internal coolant conduit to accommodate liquid coolant flow. The novel liquid-cooling architecture is referred to as LC DD-PMSG. The first of the seven publications summarized in this dissertation discusses the technological and economic benefits and limitations of DD-PMSGs as applied to wind energy. The second publication addresses the long-term reliability of the proposed LC DD-PMSG design. Publication 3 examines the machine’s electromagnetic design, and Publication 4 introduces an optimization tool developed to quickly define basic machine parameters. The static and harmonic behaviors of the stator and rotor wheel structures are the subject of Publication 5. And finally, Publications 6 and 7 examine steady-state and transient thermal behaviors. There have been a number of ancillary concrete outcomes associated with the work including the following. X Intellectual Property (IP) for direct liquid cooling of stator windings via an embedded coaxial coolant conduit, IP for a lightweight wheel structure for lowspeed, high-torque electrical machinery, and IP for numerous other details of the LC DD-PMSG design X Analytical demonstrations of the equivalent reliability of the LC DD-PMSG; validated electromagnetic, thermal, structural, and dynamic prediction models; and an analytical demonstration of the superior partial load efficiency and annual energy output of an LC DD-PMSG design X A set of LC DD-PMSG design guidelines and an analytical tool to establish optimal geometries quickly and early on X Proposed 8 MW LC DD-PMSG concepts for both inner and outer rotor configurations Furthermore, three technologies introduced could be relevant across a broader spectrum of applications. 1) The cost optimization methodology developed as part of this work could be further improved to produce a simple tool to establish base geometries for various electromagnetic machine types. 2) The layered sheet-steel element construction technology used for the LC DD-PMSG stator and rotor wheel structures has potential for a wide range of applications. And finally, 3) the direct liquid-cooling technology could be beneficial in higher speed electromotive applications such as vehicular electric drives.
Resumo:
Pemphigus foliaceus (PF) is an autoimmune bullous disease endemic in Brazil. Since serum IL-12 is increased in patients with PF and Langerhans cells (LC) produce IL-12, we titrated serum autoantibodies by indirect immunofluorescence, and quantified epidermal dendritic cells, known as LC, and dermal dendritic cells (DC). Biopsies of blistering lesions were obtained from 22 patients, 13 of whom were submitted to biopsy of both injured and of apparently healthy skin. The control groups consisted of skin from 8 cadavers and from 12 women submitted to breast plastic surgery. LC and DC were identified with anti-CD1a antibody and quantified by morphometric analysis. LC number in the lesion and in apparently healthy skin from PF patients was similar to that of both control groups. DC number in the injured skin (median = 0.94 DC/mm basement membrane) was higher than that of the cadaver group (median = 0.13 DC/mm basement membrane). In the 13 patients with biopsies of both injured and apparently healthy skin, LC and DC were present in larger numbers in the lesion. There was a direct correlation between DC number in the lesion of the PF group and serum autoantibody titers. This correlation was not observed for LC number. The increased number of DC in the lesion, as well as its direct correlation with serum autoantibody titers suggest the participation of DC in the pathogenesis of PF. The relationship between increased DC number and IL-12 in PF needs to be clarified.
Resumo:
Three recombinant antigens of Treponema pallidum Nichols strain were fused with GST, cloned and expressed in Escherichia coli, resulting in high levels of GST-rTp47 and GST-rTp17 expression, and supplementation with arginine tRNA for the AGR codon was needed to obtain GST-rTp15 overexpression. Purified fusion protein yields were 1.9, 1.7 and 5.3 mg/l of cell culture for GST-rTp47, GST-rTp17 and GST-rTp15, respectively. The identities of the antigens obtained were confirmed by automated DNA sequencing using ABI Prism 310 and peptide mapping by Finningan LC/MS. These recombinant antigens were evaluated by immuno-slot blot techniques applied to 137 serum samples from patients with a clinical and laboratory diagnosis of syphilis (61 samples), from healthy blood donors (50 samples), individuals with sexually transmitted disease other than syphilis (3 samples), and from individuals with other spirochetal diseases such as Lyme disease (20 samples) and leptospirosis (3 samples). The assay had sensitivity of 95.1% (95% CI, 86.1 to 98.7%) and a specificity of 94.7% (95% CI, 87.0 to 98.7%); a stronger reactivity was observed with fraction rTp17. The immunoreactivity results showed that fusion recombinant antigens based-immuno-slot blot techniques are suitable for use in diagnostic assays for syphilis.
Resumo:
Individuals with Down syndrome (DS) present decreased homocysteine (Hcy) concentration, reflecting a functional folate deficiency secondary to overexpression of the cystathionine ß-synthase gene. Since plasma Hcy may be influenced by genetic polymorphisms, we evaluated the influence of C677T and A1298C polymorphisms in the methylenetetrahydrofolate reductase gene (MTHFR), of A2756G polymorphism in the methionine synthase gene (MTR), and of A80G polymorphism in the reduced folate carrier 1 gene on Hcy concentrations in Brazilian DS patients. Fifty-six individuals with free trisomy 21 were included in the study. Plasma Hcy concentrations were measured by liquid chromatography_tandem mass spectrometry with linear regression coefficient r² = 0.9996, average recovery between 92.3 to 108.3% and quantification limits of 1.0 µmol/L. Hcy concentrations >15 µmol/L were considered to characterize hyperhomocystinemia. Genotyping for the polymorphisms was carried out by polymerase chain reaction followed by enzyme digestion and allele-specific polymerase chain reaction. The mean Hcy concentration was 5.2 ± 3.3 µmol/L. There was no correlation between Hcy concentrations and age, gender or MTHFR C677T, A1298C and reduced folate carrier 1 A80G genotype. However, Hcy concentrations were significantly increased in the MTR 2756AG heterozygous genotype compared to the MTR 2756AA wild-type genotype. The present results suggest that the heterozygous genotype MTR 2756AG is associated with the increase in plasma Hcy concentrations in this group of Brazilian patients with DS.
Resumo:
Occult hepatitis B virus (HBV) infection has been reported among patients with hepatitis C virus (HCV) infection and hepatocellular carcinoma (HCC). Our aim was to evaluate the presence of occult HBV infection in patients with HCV-related liver cirrhosis (LC) with or without HCC in São Paulo, Brazil. Serum and liver tissue samples from 50 hepatitis B surface antigen-negative patients with HCV-related LC who underwent liver transplantation at the University of São Paulo School of Medicine Hospital from 1993 to 2004 were divided into groups with LC only (N = 33) and with LC plus HCC (N = 17). HBV DNA was assayed for serum and paraffin-embedded liver tissue (tumoral and non-tumoral) using real time PCR and only 1 case with HCC had HBV DNA-positive serum. All liver samples were negative. HCV genotype 3 was detected in 17/39 (43.7%) cases. In conclusion, using a sensitive real time PCR directed to detect HBV variants circulating in Brazil, occult hepatitis B infection was not found among HCV-positive cirrhotic patients and was rarely found among HCV-positive HCC patients. These results are probably related to the low prevalence of HBV infection in our population. Furthermore, we have also shown that HCV genotype 3 is frequently found in Brazilian cirrhotic patients, particularly when they also have HCC. More studies involving a large number of cases should be carried out to confirm these data and to further characterize Brazilian HCV genotype isolates to elucidate genetic features that might be related to its carcinogenic potential.
Resumo:
The objective of this study was to examine hepatitis B virus (HBV) subgenotypes and mutations in enhancer II, basal core promoter, and precore regions of HBV in relation to risks of liver cirrhosis (LC) and hepatocellular carcinoma (HCC) in Southeast China. A case-control study was performed, including chronic hepatitis B (CHB; n=125), LC (n=120), and HCC (n=136). HBV was genotyped by multiplex polymerase chain reaction and subgenotyped by restriction fragment length polymorphism. HBV mutations were measured by DNA sequencing. HBV genotype C (68.2%) predominated and genotype B (30.2%) was the second most common. Of these, C2 (67.5%) was the most prevalent subgenotype, and B2 (30.2%) ranked second. Thirteen mutations with a frequency >5% were detected. Seven mutation patterns (C1653T, G1719T, G1730C, T1753C, A1762T, G1764A, and G1799C) were associated with C2, and four patterns (C1810T, A1846T, G1862T, and G1896A) were associated with B2. Six patterns (C1653T, G1730C, T1753C, A1762T, G1764A, and G1799C) were obviously associated with LC, and 10 patterns (C1653T, G1730C, T1753C, A1762T, G1764A, G1799C, C1810T, A1846T, G1862T, and G1896A) were significantly associated with HCC compared with CHB. Four patterns (C1810T, A1846T, G1862T, and G1896A) were significantly associated with HCC compared with LC. Multivariate regression analyses showed that HBV subgenotype C2 and C2-associated mutation patterns (C1653T, T1753C, A1762T, and G1764A) were independent risk factors for LC when CHB was the control, and that B2-associated mutation patterns (C1810T, A1846T, G1862T, and G1896A) were independent risk factors for HCC when LC was the control.
Resumo:
The heme oxygenase-carbon monoxide pathway has been shown to play an important role in many physiological processes and is capable of altering nociception modulation in the nervous system by stimulating soluble guanylate cyclase (sGC). In the central nervous system, the locus coeruleus (LC) is known to be a region that expresses the heme oxygenase enzyme (HO), which catalyzes the metabolism of heme to carbon monoxide (CO). Additionally, several lines of evidence have suggested that the LC can be involved in the modulation of emotional states such as fear and anxiety. The purpose of this investigation was to evaluate the activation of the heme oxygenase-carbon monoxide pathway in the LC in the modulation of anxiety by using the elevated plus maze test (EPM) and light-dark box test (LDB) in rats. Experiments were performed on adult male Wistar rats weighing 250-300 g (n=182). The results showed that the intra-LC microinjection of heme-lysinate (600 nmol), a substrate for the enzyme HO, increased the number of entries into the open arms and the percentage of time spent in open arms in the elevated plus maze test, indicating a decrease in anxiety. Additionally, in the LDB test, intra-LC administration of heme-lysinate promoted an increase on time spent in the light compartment of the box. The intracerebroventricular microinjection of guanylate cyclase, an sGC inhibitor followed by the intra-LC microinjection of the heme-lysinate blocked the anxiolytic-like reaction on the EPM test and LDB test. It can therefore be concluded that CO in the LC produced by the HO pathway and acting via cGMP plays an anxiolytic-like role in the LC of rats.
Resumo:
Além da utilização como bioconservantes de alimentos, algumas culturas bacteriocinogênicas estão sendo empregadas para acelerar a maturação de queijos. Porém a compatibilidade de desenvolvimento destas culturas com o fermento láctico é essencial para a obtenção de produtos característicos. O objetivo deste estudo foi avaliar a compatibilidade de desenvolvimento de Lactococcus lactis subsp. lactis ATCC 11454, Lactobacillus plantarum ALC 01 e Enterococcus faecium FAIR-E 198 com duas marcas comerciais de fermentos lácticos. Inicialmente, foi determinada a sensibilidade in vitro dos fermentos às culturas bacteriocinogênicas, somente Lc. lactis subsp. lactis ATCC 11454 foi capaz de promover a inibição de ambos os fermentos. Durante desenvolvimento associativo em leite a 35 ºC, as culturas bacteriocinogênicas não afetaram significativamente a produção de ácido láctico pelos fermentos. Estes, por sua vez proporcionaram aumento significativo da atividade de pediocina AcH e enterocina FAIR-E 198 e supressão da atividade da nisina. Dentre todas as culturas lácticas, Lb. plantarum ALC 01 apresentou a maior atividade de aminopeptidases (0,226 a 0,390). Portanto, baseado nos resultados em questão, Lb. plantarum ALC 01 e E. faecium FAIR-E 198 apresentam características de compatibilidade de desenvolvimento com o fermento mesofílico tipo O para serem empregadas como adjuntas no processamento de queijos.
Resumo:
A method using Liquid Chromatography Tanden Mass Spectrometry (LC-MS/MS) with matrix-matched calibration curve was developed and validated for determining ochratoxin A (OTA) in green coffee. Linearity was found between 3.0 and 23.0 ng.g-1. Mean recoveries ranged between 90.45% and 108.81%; the relative standard deviation under repeatability and intermediate precision conditions ranged from 5.39% to 9.94% and from 2.20% to 14.34%, respectively. The limits of detection and quantification were 1.2 ng.g-1 and 3.0 ng.g-¹, respectively. The method developed was suitable and contributed to the field of mycotoxin analysis, and it will be used for future production of the Certified Reference Material (CRM) for OTA in coffee.
Resumo:
Effects of cold storage and three common cooking practices, blanching, sauteing, and microwave cooking at different time intervals, on the content of glucosinolate (GSL) anticancer components in six Brassica vegetables were investigated. Eleven GSLs including progoitrin, glucoraphanin, sinigrin, glucoalyssin, gluconapin, glucobrassicanapin, glucoerucin, glucobrassicin, 4-methoxyglucobrassicin, gluconasturtiin, and neoglucobrassicin were quantified using LC-MS and HPLC. Storage at 4 ºC indicated no significant loss of GSLs in broccoli, kohlrabi, and cabbage, and approximately 90-100% of the total concentration of aliphatic and indolyl GSLs were detected. Interestingly, glucoraphanin and glucobrassicin, known as a cancer prevention agents, increased approximately above 50% in broccoli, kohlrabi, and cabbage, while the amount of glucobrassicin decreased by 5% in cauliflower for 5 days at 4 ºC. Blanching of broccoli at 120 sec significantly (36%) decreased total GSLs; however, sautéing and microwaving decreased by13-26%. Individual GSLs have different response at blanching. These findings suggest that different processing methods for each vegetable would be preferred to preserve the nutritional qualities.
Resumo:
Perfluoratut alkyyliyhdisteet eli PFAS-yhdisteet ovat synteettisiä orgaanisia yhdisteitä, joissa on fluorattu hiiliketju. Hiilen ja fluorin väliset vahvat sidokset ovat muodostuneet ongelmaksi jätevedenpuhdistamoilla, sillä yhdisteet eivät hajoa puhdistamoilla käytössä olevilla vedenpuhdistusmenetelmillä. Yhdisteitä kertyy luontoon jätevesien mukana. Kandidaatintyössä on vertailtu yhdisteitä sisältävien vesien käsittelymenetelmiä parhaiten soveltuvan menetelmän löytämiseksi. Menetelmien kustannuksia tai soveltuvuutta vedenpuhdistamomittakaavan prosessiksi ei ole arvioitu. Lisäksi työssä on koottu yhdisteitä sisältävien jätevesien analysointiin sopivia analyysimenetelmiä. Soveltuvat puhdistus- ja analyysimenetelmät on esitelty uusien tieteellisten artikkelien pohjalta. Mahdollisia erotusmenetelmiä ovat membraanierotus ja sorptio. Membraaneista soveltuvimpia ovat nanosuodatus- ja käänteisosmoosimembraanit, joilla erottuvat jopa 0,0001 μm:n kokoiset partikkelit. PFAS-yhdisteet voidaan erottaa sorptiolla muun muassa aktiivihiileen. Yhdisteiden rakenne hajoaa nykyaikaisilla hapetusmenetelmillä ja polttamalla lietteen mukana. Hapettaminen permanganaatin avulla ei tuottanut hyvää tulosta, mutta fotokemiallisella hapetuksella ja alhaisen lämpötilan plasmatekniikalla (NTP) yhdisteiden rakenne hajosi lähes kokonaan. Fotokemiallinen hapetus onnistui erityisesti perfluorokarboksyylihapoilla, joiden rakenne hajosi jopa kolmessa tunnissa. Yleisimmin käytetty analyysimenetelmä on nestekromatografin ja massaspektrometrin yhdistelmä (LC-MS/MS) ja matriisivaikutus minimoidaan tyypillisesti kiinteäfaasiuutolla (SPE). Työssä esitellyistä käsittelymenetelmistä parhaiten soveltuva on NTP-menetelmä, koska sillä saatiin tutkimusten mukaan hajotettua yhdisteiden rakenne muita menetelmiä lyhyemmässä ajassa ja se soveltuu parhaiten kaikille PFAS-yhdisteille. NTP-menetelmässä ei tarvita katalyyttiä tai lisäkemikaaleja. Voimakkaana hapettimena toimivat epästabiilit hydroksyyliradikaalit, jotka syntyvät koronapurkauksen kautta. Koronapurkauksessa muodostuu myös otsonia ja lisäksi vapaa happi voi tehostaa hapettumista. Menetelmässä muodostuvien hajoamistuotteiden hallinta vaatii lisätutkimusta. Mahdollinen hallintakeino voisi olla esimerkiksi hapettumisessa vapautuvien fluoridi-ionien saostaminen. Muodostuvien hajoamistuotteiden toksisuutta voitaisiin tarkkailla biosensorilla.
Resumo:
1884 (T4).
Resumo:
1888 (T8).
Resumo:
1893 (T13).
Resumo:
1881 (T1).
